development, the AirLive G.DUO has
finally arrived. It is the first Access Point with 2
Wireless-G radios that combines breakthrough
design and advance functions to make dual
radio applications more affordable and practical
than ever. If your wireless deployment requires
more than one access point, the G.DUO not only
reduces your deployment cost but also reduces
the energy consumption.
2 x Access Points in One
The G.DUO has 2 wireless g/b radios on board; therefore, each radio can perform completely
separate functions. Installations that used to require 2 separate access points can now be achieved
using only one G.DUO. Both radios are hi-powered up to 26dBm (20dBm in EU) for extra long
distance. In addition, G.DUO’s firmware features 5 wireless operation modes to satisfy various wireless
deployment requirements.
5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
Crystal Synergy Design
Take one look at the G.DUO and you will indulge yourself
in its stylish design. The G.DUO uses AirLive’s latest Crystal
Synergy design statement. It combines the elements of
transparency, suspension, and kinetic movement to form
the breathtaking gravity defying style. It is not only beautiful
to look at but also provides the maximum amount of
cooling surface. At AirLive, we believe our products should
complement your interior design and stands out as a piece
of art decor. The Crystal Synergy statement is a pinnacle
achievement to that goal.
WISP 2-Radio CPE Application
Traditionally, the WISP operators will
need 2 access points to provide total
wireless access for their subscribers.
That means one AP to outdoor and
one AP for subscriber’s home wireless
network. Not only this increases the
deployment cost, it also consumes more
energy and complicates the installation.
G.DUO’s “WISP+AP” wireless operation
mode is specially designed to satisfy
WISP operator’s requirement. The Site
Survey wizard combines AP scanning,
antenna alignment, and establish connection into one simple step. Service provider can even limit the
bandwidth of the connection according to the subscription class. Moreover, the “partial configuration
restore function” let you restore only wireless or network settings. It is a dream feature to allow
changing wireless settings across a large number of access points.
Hotel Hotspot Deployment
5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
Building a wireless network for hotel
is always a challenging task. Many
deployments require complete wireless
coverage without hurting the existing
decoration. That means the number of
APs and cablings should reduce to the
minimum. With G.DUO’s “WDS+AP”
operation mode, you can have one
radio for Bridge network and one radio
for AP mode. This eliminates the need
for cables between the access points.
Furthermore, the built-in PoE port allows
G.DUO to be installed in location where
there is no nearby power source.
Shopping Malls and Public Areas
AirLogic System Architecture
The G.DUO software system is
built upon the new AirLogic software
architecture. The under laying system
core is our legendary wireless engine
that offers superior performance
and rich set of functions. It features
firmware recovery system, multioperation wireless mode, bandwidth
control, and over 100 other features
that make AirLive wireless products
famous in the industry. The AirLogic
Web Interface integrates all these
powerful functions into an extremely
easy to use multi-language interface
that can change language instantly at any page.
When used with directional antennas,
the G.DUO’s dual radio system makes
it ideal for wireless coverage over large
area such as shopping malls, parks,
schools, and vacation resorts. It can
greatly reduce the number of access
points required. The G.DUO’s Crystal
Synergy design is even more stylish when
wall mounted. It will fit into decorations
of the public area much better than
conventional access points.
The G.DUO is the culmination of the latest wireless technology and innovative design. It is also a
masterpiece of meticulous engineering. But its greatest achievement is to bring the cost and flexibility
of a dual-radio product to the new level.
* DC Injector not included
5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
Specifi cations
Hardware Feature:
- 2 x 11g/b Radios
- 4MB Flash, 32MB SDRAM
- RoHS compliant
- 4 10/100 Mbps Ethernet Port with Auto MDI/MDI-X
support
- 12V Passive PoE Port (LAN1)
- WAN Port (LAN1)
- Radio1: 26dBm(South America) or 20dBm(EU) TX
output power
- Radio2: 24dBm(South America) or 20dBm(EU) TX
output power