Airlive ETHERWE-1000U User Manual
EtherWe-1000U
USB 2.0 Ethernet Adapter
he EtherWe-1000U is a Hi-Speed USB 2.0
T
10/100Mbps Ethernet Adapter specifically
designed to plug into an available USB port on a
TM
Wii
, the hottest gaming system, for it to link up
with the internet and extend the capabilities of
your Wii
Wii
compatible with Wii
solution from AirLive. No additional setups are
needed.
TM
.
TM
Compatible
AirLive EtherWe-1000U is guaranteed to be
TM
because of the new generation
AirLive EtherWe-1000U – an easier and cheaper alternative for your Wii
TM
to be online.
To connect a Wii
1000U, just simply plug one end of the EtherWe-1000U to your Wii
ADSL Router and voilà! Instant Internet Connection! No more messy settings to follow through. It’s just
that simple.
Your Wii
With your Wii
online games right from Wii
TM
on the Internet – Opening a whole new world for you.
TM
to the Internet, you need to have a wireless router. With the AirLive EtherWe-
TM
and connect the other end to your
TM
on the Internet, you can download the latest firmware, or buy the hottest and newest
TM
shop. You will have the biggest game warehouse at your fingertips.
Popular Computer System Support
The EtherWe-1000U can bring instant internet connectivity not just to your Wii, but also to your PCs
with Windows Vista, XP, 2000 and Mac OS X systems.
Wii : Wired Environment
Plug & Play
Wired Router
Internet
ADSL/Modem
5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
USB 2.0 Ethernet Adapter
Power Link
EtherWe-1000U
Wii
Wii USB port
PC/Mac : Wired Environment
Wired Router
Internet
Power Lin
k
USB 2.0 Ethernet Adapter
ADSL/Modem
Features
Features
- Compliant with Wii TM
- Compliant with USB 2.0 and USB 1.1
specifications
- Compliant with IEEE 802.3 (10Base-T)
and 802.3u (100Base-TX) standards
- Supports both full-duplex and halfduplex operations
- Supports suspend mode and remote
wakeup via link-up and magic packet
- Plug & Play installation
EtherWe-1000U
PC USB port
- Powered by USB port. No external
power adapter required
- Equips with diagnostic LEDs
System Requirements
- IBM compatible Pentium-233MHz or
faster PC or Mac
- 64 MB RAM or more
- One available USB port
- Windows® 2000, XP, Vista™ 32/64-bit;
Mac OS X
Specifi cations
Network Standards
- IEEE 802.3: 10Base-T
- IEEE 802.3u: 100Base-TX
Data Transfer Rates
- Ethernet: 10Mbps/20Mbps (Half/Full Duplex)
- Fast Ethernet: 100Mbps/200Mbps (Half/Full
Duplex)
Data Bus
- USB 2.0 (1.1 compliant)
LED Indicators
- Power, Link
5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
Power Consumption
- 850mW
Power Management
- Suspend mode, hibernation mode
Network Interface
- Female RJ45 jack
RAM
- Embedded 20KB SRAM for RX packet
- Buffering and 20KB SRAM for TX packet
buffering
Loading...