Air King 4C796G/9146G Operating Manual
MODELO 4C796G/9146G
GARANTÍA LIMITADA
QUÉ CUBRE ESTA GARANTÍAS: Este producto está garantizado contra defectos de mano de obra y/o materiales.
CUÁNTO DURA ESTA GARANTÍA
compra o hasta que el comprador original del producto venda o transera el producto, cualesquiera de ambas que ocurriera en primer lugar.
QUÉ HARÁ AIR KING
defectuosas o reemplazará el producto completo por el mismo modelo u otro comparable.
QUÉ NO CUBRE ESTA GARANTÍA
inadecuadas, daño en el envío, abuso, mal uso, reparaciones no autorizadas hechas o el intento de hacerlas. Esta garantía no cubre los costos de envío para
la devolución de productos a Air King para su reparación o reemplazo. Air King abonará los cargos de envío de devolución a Air King con posterioridad a las
reparaciones o el reemplazo bajo garantía
CUALESQUIERA Y TODAS LAS GARANTÍAS, EXPLÍCITAS O IMPLÍCITAS (INCLUYENDO, SIN LIMITACIÓN, CUALESQUIERA GARANTÍA IMPLÍCITA
DE COMERCIABILIDAD), DURAN UN AÑO A PARTIR DE LA FECHA ORIGINAL DE COMPRA O HASTA QUE EL COMPRADOR ORIGINAL DEL
PRODUCTO VENDA O TRANSFIERA EL PRODUCTO, CUALESQUIERA DE AMBAS QUE OCURRIERA EN PRIMER LUGAR Y EN NINGÚN CASO
LA RESPONSABILIDAD DE AIR KING BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA INCLUIRÁ (I) DAÑOS INCIDENTALES O POR
CONSECUENCIA POR CUALQUIER CAUSA QUE FUERE, O (II) REEMPLAZO O REPARACIÓN DE CUALESQUIERA FUSIBLES HOGAREÑOS,
CORTA-CIRCUITOS O TOMACORRIENTES. INDEPENDIENTEMENTE DE CUALQUIER DECLARACIÓN CONTRARIA, EN NINGÚN CASO LA
RESPONSABILIDAD DE AIR KING BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA PODRÁ EXCEDER EL PRECIO DE COMPRA DEL
PRODUCTO Y DICHA RESPONSABILIDAD TERMINARÁ AL VENCIMIENTO DEL PERÍODO DE GARANTÍA.
Algunos estados y provincias no permiten limitaciones sobre la duración de una garantía implícita, o sobre la exclusión o limitación de los daños
incidentales o por consecuencia, por lo tanto dichas exclusiones o limitaciones podrían no aplicarse en su caso. Esta garantía le otorga a usted
derechos legales especícos. Usted también podría tener otros derechos que varían de estado en estado y de provincia en provincia.
Se requiere prueba de compra antes que se acepte un reclamo bajo garantía.
: Durante el período de garantía, Air King, a opción propia, reparará o reemplazará cualquier parte o partes que demuestren ser
: Esta garantía se extiende únicamente al comprador original del producto y dura un (1) año a partir de la fecha original de
: Esta garantía no tiene validez si el producto fue dañado o falló debido a un accidente, manipulación u operación
8
2085300ARev. G 8/07
OPERATING INSTRUCTIONS & PARTS MANUAL
6" AIR CIRCULATOR
MODEL 4C796G/9146G
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DE-
SCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY
WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
DESCRIPTION
The Air King® 6" (15.2 cm) Air Circulator features whisper-quiet
operation, rotary switch control, and adjustable vertical tilt. The
six-inch (15.2 cm), 3-paddle fan blade is powered by a permanently
pre-lubricated motor.
SPECIFICATIONS
Motor ..............................120V, 50/60 Hz
Blade diameter ...............6" ( 15.2 cm)
Cord................................ 6 ft. (1.8 m), 18/3
Speeds ...........................2
Control............................ Rotary Switch
Approvals........................UL listed. Close mesh fan guard meets
OSHA requirements.
MODEL
M3/s 0.09 0.04
RPM 2020 1740
Amps 0.19 0.14
Watts 12 9
dB A 37 34
4C796G/9146G
SPEED
HIGH LOW
CFM 190 90
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce the
risk of re, electric shock and injury to person,
including the following:
1. Read all instructions before using Fan.
2. Make certain that the power source conforms to the electrical
requirements of the Fan.
3. Use this Fan only as described in this manual. Any other use
not recommended by the manufacturer may cause re, electrical
shock, or injury to persons.
4. Unplug power cord before installing, servicing, or moving the Fan.
WARNING: DO NOT DEPEND UPON THE ON-OFF SWITCH
AS THE SOLE MEANS OF DISCONNECTING POWER WHEN
INSTALLING OR SERVICING THE FAN. ALWAYS UNPLUG
THE POWER CORD.
5. This Fan must NOT be used in po t e ntially dangerous
locations such as ammable, explosive, chemical-laden
or wet atmospheres.
6. DO NOT use Fan in or near a window. Rain may create an
electrical hazard.
7. The power cord is equipped with a three-prong grounded plug
that must be inserted into a matching receptacle. Under no
circumstances should the grounding prong be cut off the plug.
Where a two-prong wall receptacle is encountered, it must
be replaced with a properly grounded three-prong receptacle
installed in accordance with the National Electrical Code (NEC)
and all applicable local codes and ordinances. This work must
be done only by a qualied electrician, using copper wire only.
WARNING: USE OF A THREE-PRONG TO TWO-PRONG
ADAPTER IS NOT RECOMMENDED. IMPROPER CONNECTION MAY CREATE THE RISK OF ELECTROCUTION. USE
OF SUCH ADAPTERS IS NOT PERMITTED IN CANADA.
WARNING: THIS PLUG IS A SAFETY FEATURE. TO
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
PERSONAL INJURY, DO NOT REMOVE, REPLACE, REPAIR
OR TAMPER WITH THE ORIGINALLY SUPPLIED PLUG. IF
THE FAN DOES NOT FUNCTION PROPERLY, IT MAY BE
DUE TO THE SAFETY DEVICE INCORPORATED IN THIS
PLUG. CONTACT YOUR GRAINGER DISTRIBUTOR.
8. Where possible, avoid the use of extension cords. If they must
be used, minimize the risk of overheating by ensuring that they
are UL listed. Never use a single extension cord to operate more
than one Fan.
9. Do not operate any Fan with a damaged cord or plug or after the
Fan malfunctions, has been dropped or damaged in any manner.
Return Fan to authorized service facility for examination, electrical
or mechanical adjustment or repair.
10.Do not insert or allow ngers or foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock
or re, or damage the Fan. Do not block or tamper with the Fan
in any manner while it is in operation.
11.Always place the Fan on a stable, at, level surface when operating,
to avoid the chance of the Fan overturning. Locate the Power Cord
so the Fan or other objects are not resting on it. Do not run Power
Cord under carpeting. Do not cover Power Cord with throw rugs,
runners, or the like. Arrange Power Cord away from room trafc
and where it will not be tripped over.
12.This Fan is not intended for use in wet or damp locations. Never
locate a Fan where it may fall into a bathtub or other water
container.
13. Do not use Fan outdoors.
14.This Fan is not suitable for use in agricultural facilities including
areas where livestock, poultry or other animals are conned.
Please refer to National Electric Code (NEC) Article 547-7 (2002),
or applicable state or local codes or standards relating to electrical
requirements for Agricultural Buildings. THIS FAN DOES NOT
MEET THE REQUIRMENTS OF NEC ARTICLE 547-7 (2002).
15. This Fan is not suitable for use in hazardous locations. Please
refer to National Electric Code (NEC) Article 500 or applicable
state or local codes or standards relating to electrical requirements
for Hazardous locations. THIS FAN DOES NOT MEET THE
REQUIRMENTS OF NEC ARTICLE 500 (2002).
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE
SPEED CONTROL DEVICES.
SAVE THESE INSTRUCTIONS
1
2085300ARev. G 8/07
MODEL 4C796G/9146G
MODELO 4C796G/9146G
ASSEMBLY
PACKAGE CONTENTS
Check to see that you have received all of the following parts:
A. Fan Head Assembly B. Fan Stand
1. Insert the Fan Head Assembly (A) into the top of of the Fan Stand
(B) until fully seated. (Figure 1)
A. Fan Head
Assembly
B. Fan Stand
OPERATION
1. VERTICAL ANGLE: To adjust vertical angle, tilt fan head up or
down as desired.
2. SPEED:
located on rear of the motor housing.
0 - OFF
2 - High Speed
1 - Low Speed
3. POWER SUPPLY CORD: Plug power supply cord into wall outlet
(120V AC, 60 Hz).
Speed is controlled by the three-position rotary switch
MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOV-
ING OR SERVICING THE FAN.
CLEANING:Use a soft cloth moistened with a mild soap solution.
Avoid use of gasoline, benzine, thinner, chlorinated solvents, harsh
cleaners, etc. This will result in damge to the fan.
LUBRICATION:Precision bearings are sealed at the factory for life
and will not require any further lubrication.
STORAGE: When not in use, keep unit in a clean, dry place.
WARNING: TO AVOID THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT USE FAN WITH ANY SOLID STATE SPEED
DEVICE.
10
8
9
7
4
5
3
2
Figure 1
6
LISTA DE REPUESTOS
NO.
REF
1 2096067OR Ornamento 1
2 02096067 Rejilla frontal 1
3 2011903 Paletas 1
4 02091119 Tornillo de tierra #6 x 3/8" PPH 1
5 2011790 Rejilla Trasera 1
6 2010415 Patas 2
7 2011698 Base 1
8 02030079WG Asamblaje del Motor* 1
9 2050099W Cordón eléctrico 1
10 2030077WGK Interruptor de mando 1
= La Asamblea motriz viene completa con Cable, Cambia y Cambia la Perilla
*
PARTE
NO.
DESCRIPCIÓN
1
CANT.
Rev. G 8/07
2 7
2085300A
Rev. G 8/07
2085300A
Loading...