Aiphone GHW-LC INSTALLATION & OPERATION MANUAL

- 1 -

0207 AIA

GHW-LC

GH System Lift control adaptor

INSTALLATION & OPERATION MANUAL

GHW-LC

- 2 -

General Prohibitions

General Precautions

Prohibition to Dismantle the Unit

Prohibition on Subjecting the Unit to Water

WARNING

(Negligence could result in death or serious injury.)

1. Do not dismantle or alter the unit. Fire or electric shock could result.

2. The unit must be installed and wired by a qualified technician.

3. Do not connect any non-specified power source to the +, - terminals, and do not install two power supplies in parallel to a single input. Fire, damage to the unit, or system malfunction could result.

4. Keep the unit away from water or any other liquid. Fire or electric shock could result.

5. Do not connect any terminal on the unit to AC power lines. Fire or electric shock could result.

6. Do not put any metal or flammable material into the unit through the openings. Fire, electric shock, or unit trouble could result.

7. Do not install or make any wire terminations while the lift or any other systems are powered on. It can cause electrical shock, damage, or malfunction to the other systems.

8. When checking the operation of the lift or other systems, ensure the safety of others in the surrounding area before starting. Failure to do so could cause an accident.

CAUTION

(Negligence could result in injury to people or damage to property.)

1. Do not install or make any wire terminations while power supply is plugged in. It can cause electrical shock or damage to the unit.

2. Before turning on power, make sure wires are not crossed or shorted. Fire or electric shock could result.

3. Do not put anything on or cover the unit with cloth, etc. Fire or unit trouble could result.

4. For DC powered systems, use Aiphone power supply model specified with system. If non-specified product is used, fire or malfunction could result.

5. Do not install the unit in any of the following locations. Fire, electric shock, or unit trouble could result.

∗ Places under direct sunlight, or near heating equipment that varies in

temperature.

∗ Places subject to dust, oil, chemicals, hydrogen sulfide (hot spring). ∗ Places subject to moisture and humidity extremes, such as bathroom, cellar,

greenhouse, etc.

∗ Places where the temperature is quite low, such as inside a refrigerated area or

in front of air-conditioner.

∗ Places subject to steam or smoke (near heating or cooking surfaces). ∗ Where noise generating devices such as dimmer switches, invertor electrical

appliances, are closeby.

6. When mounting the unit on wall, install the unit in a convenient location, but not where it could be jarred or bumped. Injury could result.

GENERAL PRECAUTIONS

1. This unit is for indoor use only. Do not use outdoors.

2. As to other systems used with this device, such as the lift, comply with the Manufacturer's Specifications and Warranty conditions.

3. The unit turns inoperative during power failure.

4. Keep the intercom wires more than 30 cm (12 inches) away from AC 100-240 V lines, particularly AC lines for invertor electrical appliances. Noise and malfunction could result.

PRECAUTIONS

1 SYSTEM CONFIGURATION

System Configuration 3 Wiring Distance 3

2 CONTENTS

Contents 4

3 NAMES

Names 4

4 MOUNTING

Mounting 5

5 WIRING

Wiring 6

6 SETTING UP

Setup tool 8 Lift Control 1 9 Lift Control 2 9 Data transfer 9 Combine Data 10

7 OPERATIONS

Residential Station or Security Guard Station Door Release

Automatic Entry (Doctor Call) Option 10

8 TECHNICAL PRECAUTIONS

Technical precautions 11

9 SPECIFICATIONS

Specifications 11

- 3 -

SYSTEM CONFIGURATION

1-1

System Configuration

a. GH expanded system (For details, see the GH Series

Installation & Operation Manual.)

Make sure to use GH-BCX/A, GH-DA/A, GH-NS. [1] Expanded Bus control unit GH-BCX/A [2] Distribution terminal (junction): Not included [3] Lift control adaptor GHW-LC

Relay contacts: 20 [4] Bus control unit GH-BC [5] Power supply PS-2410LC, PS-2410LD, PS-2410DIN [6] Lift controller (made by other manufacturer) [7] Lift (made by other manufacturer) [8]

Entrance station (digital name scrolling type): Audio only or Audio/video

Do not use direct selection GH-SW.

∗ For other Wiring Distances, see the GH Series Installation &

Operation Manual.

Capacity

Lift control adaptor

Maximum 16 adaptors (up to 8 adaptors per trunk)

1-2

Wiring Distance

∗ DP = Distribution Point

Diameter of wires

GH-BCX/A ~ GHW-LC -

300 m

(980')

300 m

(980')

300 m

(980')

2500 m

(8200')

GH-BCX/A ~ GH-BC

0.65 mm

(22 AWG)

DP ~ GHW-LC

GH-BC ~ DP

GH-BC ~ power supply

Total wiring distance GH-BCX/A ~ GHW-LC

5 m

(16')

5 m

(16')

0.8 mm

(20 AWG)

1.0 mm

(18 AWG)

5 m

(16')

∗ Capacity of other units conform to the expanded system.

#16

GH-BC

GH-BCX/A

PS24

Max. 8

GH Expanded System

GHW-LC

[1]

[3]

GHW-LC

[3]

[6]

[7]

[4]

[5]

[2]

1-1

Max. 8

GHW-LC

[3]

GHW-LC

[3]

[6]

[7]

PS24

GH-DA/A + GH-NS, GH-10K

GH-VA + GH-DA/A + GH-NS, GH-10K

[8]

Common trunk

Sub trunk

- 4 -

CONTENTS

Contents

Lift control adaptor GHW-LC (mounting bracket is included)

NAMES

Names

[1] Bus line terminal [2] ID setting switch [3] Relay output terminal [4] Lock release lever

GHW-LC

[1]

[4]

[3]

[2]

[3]

+ 8 hidden pages