Aiphone GF-NS User Manual
GF-NS.E MANUAL E TH 0402
®AIPHONE
DIGITAL NAME SCROLLING APARTMENT INTERCOM SYSTEM
GF-NS
OPERATION MANUAL
o®@
0®o
GF-NS
PRECAUTIONS
GF-10K
®
WARNING (Negligence couia result in aeath or serious injury
A
1. This device is electrical. Wiring must be done /C^
by qualified personnel.
2. Do not modify or alter the equipment.
3. Do not open GF-NS/GF-1 OK case.
/?\ CAUTION (Negligence couia result in injury to people or
1. GF-NS/GF-10K are weather resistant. However, do not
spray high pressure water directly onto it by hose, etc.
to people.)
Damage to property.)
1 NAMES & FUNCTIONS
GF-NS, Name scroll module
GF-10K
GENERAL PRECAUTIONS
1. GF system is not operable during a power failure.
2. In areas where broadcasting station antennas are
close by, intercom system may be affected by
radio frequency interference.
General Prohibitions
Q
Prohibitions to subject
the unit to water
1. LCD display
2. CANCEL (or decide & back)
3.
4.
5.
GF-10K, Digital keypad module
6. Digital keypad (1 ~ 0, ^#)
SCROLL backward or move cursor to left
A
SCROLL forward or move cursor to right
V
CALL (or decide & next)
0
When entering letters; A~Z, 0 = [,][-][.][/][ ]
Functions: • Dialing Room #
• Door release by entering Access code
• Name search with 0key and calling
Prohibitions to
dismantle the unit
2 PROGRAMMING
Programming by PC
liggiiiil
5666
GF-NS
• It is possible to write or change resident names from
your PC, making data input.
• Download Programming & Alteration Method from
Aiphone’s Web Site: http://www.aiphone.com/
• Connect your PC with GF-NS in conjunction with the
connecting cable supplied with GF-NS.
-
Cable I
______________
(supplied)
1 I
I
PC
Programming by GF-NS & GF-10K
• On LCD display, see a message "WELCOME"
to confirm system is in standby.
Prior to programming, it is suggested to have
your own ID code newly registered, so that any
other person cannot get into the system.
-► Go to P.2
Firstly, enter program mode.
In case your programmed ID code is forgotten,
Go to P.4
- 1
Enter Program Mode
LCD your operation
. WELCOME - ® ®©©o©
/
-RE-ENTER ID CODE
»ilDCODE= ® 4 digit
@©©©®
INITIAL ID CODE
INITIAL ID CODE
Select Menu & Quit
LCD
' SELECT LANGUAGE
MENU
1 ISELECT LANGUAGt^
2 [CHANGE ID СОЖ1 -►
3 [ACCESS CODE
4 [RESIDENCE IN~FO~[ ^
5 [SET TIMER
6 [CHANGE ОНЕЁТЩ^
7 [QUIT П -
I -»
DECIDE & NEXT
DECIDE & BACK
YOUR OPERATION
® (f)
BACKWARD FORWARD
Scroll
(0) Go to Menu 1-6
Standby
Menu 1: Select language
LCD
SELECT LANGUAGE
MENU
ENGLISH ©©
FRANÇAIS
DFUTSCH BACKWARD FORWARD
ESPANOL 1 ^ „
NEDERLANDSi Scroll
SELECT LANGUAGE
ENGLISH
YOUR OPERATION
• @
DECIDE & NEXT
DECIDE & BACK
(V)
Menu 3: Program Access Code
i
Menu 2
Menu 2: Change ID code
LCD YOUR OPERATION
CHANGE ID CODE
CHANGE ID CODE
*1111
CHANGE ID CODE
*0123
Ж ID CODE = ® 4 digit
j
INITIAL ID
®
DECIDE & NEXT
/
Enter new ID code
-►
/
-►
(g) ----------------------► Menu 3
DECIDE & BACK
NEW ID (4-digit)
Menu 4: Write Residence info.
Move cursor
®
1 TO RIGHT ;
:®
! TO LEFT ;
Menu 5: Set input timeout timer Menu 6: Change Greeting
Loading...