Ag Spray RM110, RM200 User Manual

OWNERS MANUAL

RM 110, 150, & 200

8 ROLLER PUMP

HAMILTON #20,

BOOMJET #10, BOOM XT

AG 6 or 8 ROW DELUXE BOOM

1

RM 110, 150, & 200

AG SPRAY EQUIPMENT OWNER’S MANUAL

Congratulations on purchasing your new three point hitch field sprayer. This manual is designed to aid you in operating your
new sprayer. Also enclosed is a parts breakdown and/or calibration chart for the following: roller pump, pressure regulator,
43L-AL spray gun, Hamilton nozzle, Boomjet nozzle, Boom X- tender nozzles & the 6 or 8 row deluxe boom.

WARRANTY

All Field Sprayers are under warranty by Ag Spray Equipment for a one year period from the date of purchase. This warranty
only applies to defects in workmanship or manufactures defects in their components. This warranty does not cover any misuse,
abuse, or parts that may freeze & break. Owners are responsible for these issues. Parts proven defective within the one-year
period will be replaced at no charge.

Ag Spray Equipment must be notified immediately of any defects or parts broken due to shipping on the sprayer. After the
one-year period all warranty is void. No product will be accepted for return without authorization. All returned goods must be
packaged securely and shipped with transportation charges prepaid.

For further information regarding parts or warranty, contact:

Ag Spray Equipment
1100 New Industry Lane
Hopkinsville, KY 42240
Phone: [phone]

Operation & Instructions of New Sprayer

First, back your tractor up to the sprayer and let the lift arms all the way down. Insert the lift pins into the lift arms of the
tractor & secure with lock pins. Second, hook up the top link on the tractor to the very top
hole of the frame. Next, connect the pump to the PTO shaft on your tractor by pulling the orange coupler back while sliding it
onto the PTO shaft until the balls lock into the grooves on the shaft. After pump is secure take the chain & wrap it around the
drawbar of the tractor using the snap link to snap the chain together to keep pump from twisting hoses when PTO is engaged.

Next, fill the tank at least _ to _ full of plain water with no chemicals. Screw the pressure regulator (23120-3/4-PP, gray knob)
part of the way out & make sure agitation valve (V25B) is _ of the way open. This ensures that you do not overpressure the
gauge & break it. Also, make sure the valve under the tank is open (handle should be turned going w/ the line).

You are now ready to try out your sprayer. Engage PTO lever & pull throttle to the 540RPM mark on the RPM gauge. Turn
boom valve on & adjust to the desired operating pressure. Adjust pressure with the pressure regulator (gray knob) & not the
agitation valve because you need to keep agitation constant.

2

CALIBRATING YOUR SPRAYER

HAMILTON NOZZLE 654201

CALIBRATING YOUR SPRAYER

To determine pressure & GPA with a boomless nozzle use this calibration for it is different than a boom
calibration:

GPA = 495 X GPM

MPH x Swath in feet

EXAMPLE: 495(constant) x 4.2gpm=2079 2079 = 10.395 GPA

4mph x 50’swath=200 200

Refer to Chart

OPERATING DATA OF 180* NOZZLES

SPRAYERS ARE SUPPLIED w/ #20

Orfice GPM Swath GALLON PER ACRE

Number PSI 180* 180* 3 MPH 4 MPH 5 MPH 8 MPH 10 MPH

30 1.7 44' 6.4 4.8 3.8 2.4 1.9

#5 40 2.0 46' 7.2 5.4 4.3 2.7 2.2

50 2.2 48' 7.6 5.7 4.5 2.9 2.3

60 2.4 50' 7.9 5.9 4.8 3.0 2.4

30 3.7 50' 12.2 9.2 7.3 4.6 3.7

#10 40 4.2 50' 13.9 10.4 8.3 5.2 4.2

50 4.6 52' 14.6 10.9 8.8 5.5 4.4

60 5.0 52' 15.8 11.9 9.5 5.9 4.8

30 5.1 54' 15.6 11.6 9.3 5.8 4.7

#20 40 5.9 54' 18.0 13.5 10.8 6.8 5.4

50 6.7 56' 19.7 14.8 11.8 7.4 5.9
60 7.1 58' 20.2 15.1 12.1 7.6 6.1

GPM = Gallons Per Minute
GPA = Gallons Per Acre
MPH = Miles Per Hour
PSI = Pressure Per Square Inch

3

SPRAYING SYSTEMS 5880 BOOMJET NOZZLE

*NOTE: BOOMJET SPRAYERS ARE STANDARD w/ #10 NOZZLES & a HYPRO 8 ROLLER
PUMP.

IF A #20 NOZZLE IS USED THEN YOU NEED TO GO TO A HYPRO 5 ROLLER PUMP & 1”
PLUMBING (BECAUSE OF THE VOLUME NEEDED).

4