Ag Spray BASPOTSPRAYERK User Manual

Owner's Manual

Model: BASPOTSPRAYERK (5302060)

(Bolt-On Boomless Nozzle Assembly for Spot Sprayers with 'Top-Mounted' pumps)

Thank you for purchasing this product. The purpose of
this manual is to assist you in operating and
maintaining your boomless nozzle setup. Please read

Pump is shown but

not included in this assembly.

it carefully, as it furnishes information which will help
you achieve years of trouble-free operation.

Warranty/Parts/Service

Products are warranted for one year from date of purchase
against manufacturer or workmanship defects.

Commercial users have a 90 day warranty.

Your authorized dealer is the best source of replacement
parts and service. To obtain prompt, efficient service, always
remember to give the following information...

- Correct Part Description and/or part number.

- Model number/Serial number of your sprayer.

Features/Benefits

Nozzle features a multi-patented round covered orifice

•
design which improves spray pattern & distribution.

No small orifices or slots to get plugged up.

•

1/4" (MNPT) inlet threads (Male National Pipe Thread)

•

Nozzle produces a very even, large droplet spray

•
pattern.

Superior wear & chemical resistance.

•

Eliminates cumbersome boom 'arms'.

•

Eliminate most 'normal' boom maintenance.

•

Spray easily around obstacles & over uneven terrain

•

All full pattern spray nozzles were tested at a height of

•
36 inches. (recommended operating height is between
18 & 48 inches.) These nozzles are designed to
provide a full left-hand to right-hand spray pattern
from a single centrally mounted nozzle.

Part descriptions and part numbers can be obtained from the
illustrated parts list section(s) of this manual.

Whenever you need parts or repair service, contact your
distributor/dealer first. For warranty work, always take your
original sales slip, or other evidence of purchase date, to
your distributor/dealer.

www.agspray.com

1100 New Industry Lane

Hopkinsville, KY 42240

P: 800-637-7172
F: 270-885-7392

Form No. 2002 [5008306 (11/10)] Printed in the U.S.A.

104 Eastman Street

Greenwood, MS 38930

P: 800-844-4524
F: 662-455-4442

1563 S. Oates Street

Dothan, AL 36301

P: 800-227-4098
F: 334-673-1974

Nozzle Height Adjustment

After Spraying

Nozzles can be used at various heights within the
recommended range. However, this will affect the spray
pattern width and the gallons per acre (GPA) applied.

Adverse Wind Conditions

With boomless spray nozzles, as with other spraying
methods, high or gusty wind conditions can cause drifting
or pattern movements, adversely affecting spray coverage.
If this occurs, wait for more favorable conditions before
continuing.

Plumbing Requirements

Make sure that all plumbing components and feed lines
can properly supply the nozzle or nozzles at their rated
GPM and PSI. The type of pump used as well as the size
and length of the feed line will also affect how efficiently the
volume is delivered to the nozzle or nozzles. Minimum
hose size and plumbing requirements are:

Nozzle

Qty.

1
2
1
2
1
2

Nozzle Size

1/4" MNPT Nozzle

1/4" MNPT Nozzles

1/2" MNPT Nozzle

1/2" MNPT Nozzles

1" MNPT Nozzle

1" MNPT Nozzles

Hose Size

1/2" I.D. Hose
3/4" I.D. Hose

1" I.D. Hose

1" I.D. Hose
1-1/4" I.D. Hose
1-1/2" I.D. Hose

Proper Nozzle Operation

To insure proper nozzle operation all pressure readings
must be taken directly before the nozzle or nozzles.

After use, fill your sprayer tank part way with water. Start
your sprayer, and allow the clear water to be pumped
through this plumbing system and out through the spray
nozzle.
Refill your tank about half full with plain water and use
FIMCO Tank Neutralizer and Cleaner, and repeat cleaning
instructions above.
Flush your entire sprayer, including this boomless plumbing
setup, with the neutralizing/cleaning agent, then flush out
one more time with plain water. Follow the chemical
manufacturer's disposal instructions of all wash or rinsing
water.
For the boomless nozzle, remove the tip and screen from
the nozzle assembly. Wash these items out thoroughly.
Blow the orifice clean and dry. If the orifice remains
clogged, clean it with a fine bristle (NOT WIRE) brush, or
with a toothpick. Do not damage the orifice. Water rinse and
dry the tips before storing. The screen at the tip (Item 24) is
between the elbow (Item 19) and the adaptor (Item 3).

Winter Storage

Drain all water out of your sprayer, paying special attention
to your pump, handgun, and valve(s). These items are
especially prone to damage from chemicals and freezing
weather.

Your sprayer should be winterized before storage by
pumping a solution of RV antifreeze through the entire
plumbing system. This antifreeze solution should remain in
the plumbing system during the winter months. When spring
time comes and you are preparing your sprayer for the
spray season, rinse the entire plumbing system out, clearing
the lines of the antifreeze solution. Proper care and
maintenance will prolong the life of your sprayer.

SPRAYING SAFETY:

ALWAYS WEAR PROTECTIVE CLOTHING WHEN
SPRAYING AND/OR HANDLING ANY AND ALL
CHEMICALS.

'BOOMINATOR' Boomless (Full) Spray Tip Model #1200PS

(1/4" MNPT)

Spraying
Pressure

PSI

20 1.0

30 1.2

40 1.4

1/4" MNPT

Flow
Rate

GPM

Tested Height = 24" Tested Height = 36"

Spray Distance Spray Distance

12 Ft.

12 Ft.

12 Ft.

'BOOMINATOR' Boomless (Full) Spray Nozzle (#1200PS)

14 Ft.

14 Ft.

14 Ft.

Speed (MPH)

1 2 3 4 5 6 7

Gallons Per Acre (GPA)

35 18 12 9 7 6 5

42 21 14 10 8 7 6

49.5

25

16.5

12 10 8 7

(Typical Spray Pattern)

14'-0"

Page 2