Ag Leader Versa DirectCommand Planter Monitor Module Reference Guides

Kinze Planter Monitor

To create a conguration, make the following button presses to start the Conguration Wizard and then follow the instructions given on the display.

Enter Settings

Ground Speed

Planting

Conguration Product

Planting

Press to Highlight Conguration

8360,1770,3dr

Choose the number of front “pusher” row units

number of drill shaft RPM sensors

Allows user to redo the Muxbus Sensor Detection

Check this box if planter is equipped with a magnetic pickup speed sensor.

Start of Conguration Wizard

Choose the number of rear row units

Select Row Spacing Choose the

Seed size sensitivity, automatically adjusts based on crop type selected. Higher sensitivity is used for smaller seeds. Lower sensitivity if dust is affecting displayed population.

Calibrate the magnetic pickup speed sensor by driving a known distance and entering that distance into the display. (PMM must be selected for speed source to allow calibration)

Choose desired speed source from drop down menu

Check mark the boxes of specic sensors that are equipped on the planter

Select the number of EdgeVac vacuum sensors that are equipped on the planter

EdgeVac sensors should be calibrated each season

Check this box if planter is equipped with a tank pressure sensor Calibrate tank pressure sensor each season

Quick Reference Guide

2006002-ENG Rev A

Kinze Planter Monitor

Select after replacing a failed sensor. Use this option to avoid have to redo the entire Muxbus Sensor Detection

Select if a sensor fails, and will be replaced with a functioning sensor

Select to no longer ignore a sensor

Select if a sensor has failed, and an immediate replacement is not available

Displays sensor’s ID#, Serial #, Model # and Baud rate

Congure population alarms

Alarm will sound if the individual seed tube sensor senses a planting rate of the selected percentage relative to planter average population.

To start the Field Operation Wizard and load a conguration:

Conguration

Start Field Operation

To view run screen:

Quick Reference Guide

2006002-ENG Rev A

+ 1 hidden pages