Agilent 86205A Specifications Sheet

Network Analyzers

294 Accessories

HP 8753E

Series

HP 86205A/86207A

HP 86205A/86207A RF Bridges

The HP 86205A/86207A high directivity RF bridges offer unparalleled
performance in a variety of general-purpose applications. They are ideal
for accurate reflection measurements and signal leveling applications.

Specifications Summary

HP 86205A HP 86207A

Impedance 50 Ω 75 Ω
Freq. Range 300 kHz to 6 GHz 300 kHz to 3 GHz

5

Directivity 30 dB, 0.3 MHz to 5 MHz 30 dB, 0.3 MHz to 5 MHz

Coupling Factor (< 3 GHz) 16.0 dB, + 0.15 dB/GHz

Insertion Loss 1.5 dB, + 0.1 dB/GHz
Maximum Input 25 dBm
RF Connectors 50 ΩType-N (female) 75 ΩType-N (female)

40 dB, 5 MHz to 2 GHz 40 dB, 5 MHz to 1.3 GHz
30 dB, 2 GHz to 3 GHz 35 dB, 1.3 GHz to 2 GHz
20 dB, 3 GHz to 5 GHz (typ.) 30 dB, 2 GHz to 3 GHz
16 dB, 5 GHz to 6 GHz (typ.)

(> 3 GHz) 16.5 dB, – 0.20 dB/GHz

Physical Characteristics

Size: 93 mm H x 160 mm W x 23 mm D (3.7 in x 6.3 in x 1 in)
Weight: Net, 0.57 kg (1.3 lb); shipping, 1.8 kg (4 lb)

HP 11850C/D Three-Way Power Splitters
Specifications Summary

HP 11850C HP 11850D

Impedance 50 Ω 75 Ω
Frequency Range DC to 3 GHz DC to 2 GHz
Tracking ±0.25 dB, ±3˚ ±0.2 dB, ± 2.5˚
Equivalent Source Match 30 dB at 1.3 GHz 30 dB at 1.3 GHz

(ratio or leveling) 20 dB at 3 GHz 20 dB at 3 GHz

Nominal Insertion Loss 9.5 dB + 1 dB/GHz 7.8 dB
Input Port Match

DC to 1.3 GHz 20 dB 20 dB

1.3 GHz to F

RF Connectors

RF Input: (female) 50 ΩType-N 50 ΩType-N
All Others: (female) 50 ΩType-N 75 ΩType-N

1

max

F

1

max

is the upper frequency limit of the associated power splitter.

10 dB 10 dB

HP 11851B RF Cable Kit

This kit includes three 610-mm (24-in) 50 Ω cables phase matched to 4˚
at 1.3 GHz and one cable 860 mm (34-in). Connectors are type-N (male).

Maximum Input Power: 250 mW (+24 dBm)
RF Connectors: 50 Ω type-N (f) and 75 Ω type-N (m) standard,

50 Ωtype-N (m) and 75 Ω type-N (f) Option 004

Type-N Accessory Kits

Each kit contains a type-N (female) short, a type-N (male) short, two
type-N (male) barrels, two type-N (female) barrels, and a storage case.

HP 11853A 50 ΩType-N Accessory Kit

The HP 11853A accessory kit furnishes the RF components required
for measurement of devices with 50 Ω type-N connectors using the
HP 11850C, 85044A, 85046A, or 85047A.

HP 11855A 75 ΩType-N Accessory Kit

The HP 11855A accessory kit furnishes the RF components required
for measurement of devices with 75 Ω type-N connectors using the
HP 11850D, 85044B, or 85046B. This kit also contains a 75 Ω type-N
(male) termination.

BNC Accessory Kits

The BNC accessory kit contains two type-N (male) to BNC(female)
adapters, two type-N (male) to BNC (male) adapters, two type-N (female)
to BNC (female) adapters, two type-N (female) to BNC (male) adapters, a
BNC (male) short, and a storage case.

HP 11854A 50 ΩBNC Accessory Kit

The HP 11854A accessory kit furnishes the RF components required
for measurement of devices with 50 Ω BNC connectors using the
HP 11850C, 85044A, 85046A, or 85047A.

HP 11856A 75 ΩBNC Accessory Kit

The HP 11856A furnishes RF components required for measurement of
devices with 75 Ω BNC connectors using the HP 11850D, 85044B, or
85046B. This kit also contains a 75 ΩBNC (male) termination.

Test Port Cables

HP 11857D 50 ΩAPC-7 Test Port Cables

The HP 11857D includes two precision 61-cm (24-in) cables, phase
matched to 2˚ at 1.3 GHz for use with the HP 8753D/E, 85046A or
85047A S-parameter test sets. Connectors are 50 ΩAPC-7.

HP 11857B 75 ΩType-N Test Port Cables

The HP 11857B includes two precision 61-cm (24-in) cables, phase
matched to 2˚ at 1.3 GHz for use with the HP 8753D/E Option 075 or
HP 85046B S-parameter test set. One cable has 75 Ωtype-N (male) con­nectors on both ends; the other has one type-N (male) and one type-N
(female) connector.

Transit Cases

HP offers a complete line of sturdy transit cases that protect your
instrument from shock, vibration, moisture, impact, and contamination,
providing a secure enclosure for shipping. Model 9211-2657 fits the
HP 8753E and model 9211-2656 fits the HP 8752C.

Calibration Kits

The calibration kits in the HP 8753 family contain precision standards
used in accuracy enhancement procedures to characterize the system­atic errors of an HP 8753 measurement system.

HP 85031B 7-mm Calibration Kit

The HP 85031B calibration kit contains a set of precision 7-mm fixed
terminations, and a one-piece open/short circuit used to calibrate the
HP 8753 and its 50 Ω test sets for measurement of devices with preci­sion 7-mm connectors. This kit is specified 300 kHz to 6 GHz.

HP 11852B 50 Ω/75 Ω Minimum Loss Pad

The HP 11852B is a low SWR minimum loss pad required for measure­ments on 75 Ωdevices with the HP 8753.

Frequency Range: DC to 3.0 GHz
Insertion Loss: 5.7 dB
Return Loss: 75 Ω: typically ≥ 30 dB, 50 Ω: typically ≥ 26 dB