Agilent 8563E Data Sheet

• Measure W-CDMA adjacent channel power ratio (ACPR) with a dynamic range of at least 70 dB.
• Frequency conversion and filtering optimized for maximum dynamic range measurement of ACPR of systems with 900 kHz or greater guard band.
• Device under test can range from 1.2 GHz to 3.0 GHz.
• Easy to use. Control menus are integrated into Agilent 8560 E/EC-Series soft keys.
Use Agilent Technologies 8563E-K35 with the Agilent 8560 E/EC-Series of spectrum analyzers to increase the dynamic range of adjacent channel power measurements. The 8563E-K35 uses an alter­nate first converter mixer with custom filtering to increase the spectrum analyzer’s ACPR measure­ment dynamic range to at least 70 dB for systems with a guard band between channels of 900 kHz or greater. This meets the needs of emerging W-CDMA specifications.
Agilent 8563E-K35
Adjacent Channel Power Ratio Test Set Optimized for W-CDMA
Technical Overview
Dynamic range measurement (limited by source noise)
Guard band definition
For use with Agilent 8560E/EC, 8561E/EC, 8562E/EC, 8563E/EC, 8564E/EC, and 8565E/EC spectrum analyzers
904 kHz guard band
4.096 MHz channel bandwidth
5.000 MHz channel spacing
Supplemental Specifications
Refer to the Agilent 8560 E/EC-Series spectrum analyzers data sheet for base instrument specifica­tions. The following table provides performance characteristics of the 8563E-K35 test set.
Frequency range 1.2 GHz to 3.0 GHz Maximum input power +5 dBm Damage input power +30 dBm Input attenuator 0 to 11 dB in 1 dB steps Conversion loss 15 dB nominal (not relevant
to ACP ratio measurement)
LO input frequency 3.0 GHz to 6.8 GHz LO input power range +9 dBm to +20 dBm
Note: In order for the 8563E-K35 softkey menus to be incorporated into an existing
8560 EC-Series spectrum analyzer, the analyzer’s firmware must be upgraded. For a new 856xEC, order 856xEC-H35; for a retrofit upgrade to 856xEC, order 856xU-H35 (where x = 0, 1, 2, 3, 4, 5).
Ordering Information
8563E-K35 W-CDMA ACPR test set 856xEC-H35 Firmware upgrade in order
(x = 0, 1, 2, 3, 4, 5) for a new 856xEC to work
with the 8563E-K35 test set
856xU-H35
1
Service Center installable
(x = 0, 1, 2, 3, 4, 5) retrofit firmware upgrade in
order for an existing 856xEC to work with the 8563E-K35 test set
1. The retrofit firmware upgrade is not available for the 856xE Series.
–20 –15 –10 –5 0
–80
–75
–70
–65
–60
–55
–50
Input Mixer Level (dBm)
Dynamic Range (dBc)
Noise Limited DR
TOI Limited DR
Agilent 8563E-K35: Typical W-CDMA ACPR Dynamic Range (measured in a 4.096 MHz integration BW)
Agilent Technologies’ Test and Measurement Support, Services, and Assistance
Agilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully. Every instrument and system we sell has a global warranty. Support is available for at least five years beyond the production life of the product. Two concepts underlie Agilent’s overall support policy: “Our Promise” and “Your Advantage.”
Our Promise
Our Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic performance specifica­tions and practical recommendations from experienced test engineers. When you use Agilent equipment, we can verify that it works properly, help with product operation, and provide basic measurement assistance for the use of specified capabilities, at no extra cost upon request. Many self-help tools are avail­able.
Your Advantage
Your Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchase according to your unique tech­nical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration, extra-cost upgrades, out-of-warranty repairs, and onsite education and training, as well as design, system integration, project management, and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity, opti­mize the return on investment of your Agilent instruments and systems, and obtain dependable measurement accuracy for the life of those products.
www.agilent.com/find/emailupdates
Get the latest information on the products and applications you select.
Agilent T&M Software and Connectivity
Agilent’s Test and Measurement software and connectivity products, solutions and developer network allows you to take time out of connecting your instruments to your computer with tools based on PC standards, so you can focus on your tasks, not on your connections. Visit
www.agilent.com/find/
connectivity
for more information.
By internet, phone, or fax, get assistance with all your test & measurement needs
Online Assistance:
www.agilent.com/find/assist
Product specifications and descriptions in this document subject to change without notice.
© Agilent Technologies, Inc. 1997, 2000, 2003 Printed in USA, September 25, 2003
5966-2913E
Phone or Fax United States:
(tel) 800 452 4844
Canada:
(tel) 877 894 4414 (fax) 905 282 6495
China:
(tel) 800 810 0189 (fax) 800 820 2816
Europe:
(tel) (31 20) 547 2323 (fax) (31 20) 547 2390
Japan:
(tel) (81) 426 56 7832
(fax) (81) 426 56 7840
Korea:
(tel) (82 2) 2004 5004 (fax) (82 2) 2004 5115
Latin America:
(tel) (305) 269 7500 (fax) (305) 269 7599 Taiwan: (tel) 0800 047 866 (fax) 0800 286 331
Other Asia Pacific Countries:
(tel) (65) 6375 8100 (fax) (65) 6836 0252 Email: tm_asia@agilent.com
Agilent Email Updates
Loading...