
HP 43961A RF Impedance Test Kit
Notice
The information contained in this document is subject to change without
notice.
This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated to another language without the
prior written consent of the Hewlett-Packard Company.
Safety Summary
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument.
The Hewlett-Packard Company assumes no liability for the customer's failure to
comply with these requirements.
DO NOT Operate In An Explosive Atmosphere
Do not operate the instrument in the presence of flammable gasses or
fumes. Operation of any electrical instrument in such an environment
constitutes a safety hazard.
Keep Away From Live Circuits
Operating personnel must not remove instrument covers.
Warranty
This Hewlett-Packard instrument product is warranted against defects in material
and workmanship for a period of three months from the date of shipment.
During the warranty period, Hewlett-Packard Company will, at its option, either
repair or replace products which prove to be defective.
For warranty service or repair, this product must be returned to a service facility
designated by HP. Buyer shall prepay shipping charges to HP and HP shall
pay shipping charges to return the product to Buyer. However, Buyer shall pay
all shipping charges, duties, and taxes for products returned to HP from another
country.
HP Part Number : 43961-90010
Printed: October,1998
(Second Edition)
PRINTED IN JAPAN

Limitation Of Warranty
The foregoing warranty shall not apply to defects resulting from improper or
inadequate maintenance by Buyer, Buyer-supplied software or interfacing,
unauthorized modification or misuse, operation outside of the environmental
specifications for the product, or improper site preparation or maintenance.
No other warranty is expressed or implied. HP specifically disclaims the implied
warranties of merchantability and fitness for a particular purpose.
Exclusive Remedies
The remedies provided herein are buyer's sole and exclusive remedies. HP
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any other legal theory.
Contents
Table 1-1 shows the contents of the HP 43961A Impedance Test Kit.
Table 1-1. Contents of the HP 43961A
No. Description Qty. HP Part Number
1 Impedance Test Adapter 1 43961-61001
2 0 S Calibration Standard 1 04191-85302
3
0Ωcalibration Standard
4
50Ωcalibration Standard
5 N(m)-N(m) cable 1 41951-61602
Carrying Case
Notice
1
1
1 04191-85300
1 04191-85301
1 43961-60001
1 43961-90000