Aemc instruments 6417 User Manual

Clamp-on Ground Tester
Model 6417

Quick Start Guide

ENGLISH

www.aemc.com

®

CHAUVIN ARNOUX GROUP

Shipping Contents:

PRODUCT PACKAGING

Clamp-on Ground Tester

Model 6417

Cat. #2141.02

5W Calibration Loop

Cat. #2141.51

Also Included:

(4) 1.5V AA Batteries

(1) Wrist Strap

(1) Safety Sheet (20 languages)

(1) Quick Start Guide

Hard Accessory Case

Cat. #2141.50

USB Stick with

DataView® Software & User Manual

Bluetooth Adapter

Cat. #2126.45

USB STICK: DataView® software and complete user manual for the Model 6417

can be located on the USB stick supplied with the instrument.

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments
certifies that this instrument has been calibrated
using standards and instruments traceable to
international standards.

We guarantee that at the time of shipping your
instrument has met its published specifications.

An NIST traceable certificate may be
requested at the time of purchase, or obtained
by returning the instrument to our repair and
calibration facility, for a nominal charge.

The recommended calibration interval for this
instrument is 12 months and begins on the date of
receipt by the customer. For recalibration, please
use our calibration services. Refer to our repair
and calibration section at www.aemc.com.

Serial #: ________________________________

Catalog #: 2141.02

Model #: 6417

Please fill in the appropriate date as indicated:

Date Received: _________________________________

Date Calibration Due: _______________________

Chauvin Arnoux®, Inc.
d.b.a AEMC® Instruments

www.aemc.com

Thank you for purchasing the AEMC Clamp-on Ground Resistance Tester.

For best results from your instrument and for your safety, read the enclosed operating
instructions carefully and comply with the precautions for use. These products must be

only used by qualied and trained users.

WARNING, risk of DANGER! The operator must refer to these instructions whenever this
danger symbol appears.

CAUTION! Risk of electric shock. The voltage at the parts marked with this symbol may be
dangerous.

Application or withdrawal authorized on conductors carrying dangerous voltages.
Type A current sensor as per IEC 61010-2-032.

Must not be applied to or removed from conductors at dangerous voltages.
Type B current sensor as per IEC 61010-2-032.

Equipment is protected by double insulation.

The product has been declared recyclable after analysis of its life cycle in accordance with
the ISO14040 standard.

Important instructions to read and to fully understand.

Useful information or tip to read.

The CE marking guarantees conformity with European directives and with regulations
covering EMC.

The trash can with a line through it means that in the European Union, the product must
undergo selective disposal for the recycling of electric and electronic material,
in compliance with Directive WEEE 2002/96/EC.

Denition of Measurement Categories (CAT)

CAT IV Measurement category IV corresponds to measurements taken at the source

of low-voltage installations.
Example: power feeders, counters and protection devices.

CAT III Measurement category III corresponds to measurements on building installa-

tions.

Example: distribution panel, circuit-breakers, machines or xed industrial

devices.

CAT II Measurement category II corresponds to measurements taken on circuits

directly connected to low-voltage installations.
Example: power supply to domestic electrical appliances and portable tools.