AEMC CA1110 Quick Start Guide

Lightmeter Data Logger

Model 1110

Quick Start Guide

ENGLISH

www.aemc.com

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments certifies
that this instrument has been calibrated using standards
and instruments traceable to international standards.

We guarantee that at the time of shipping your instrument
has met its published specifications.

An N.I.S.T. traceable certificate may be requested at the
time of purchase, or obtained by returning the
instrument to our repair and calibration facility, for a
nominal charge.

The recommended calibration interval for this instrument
is 12 months and begins on the date of receipt by the
customer. For recalibration, please use our calibration
services. Refer to our repair and calibration section at

www.aemc.com

.

Serial #:
Catalog #: 2121.71
Model #: 1110

Please fill in the appropriate date as indicated:

Date Received:
Date Calibration Due:

Chauvin Arnoux®, Inc.
d.b.a AEMC

www.aemc.com

®

Instruments

1

WARNING, risk of DANGER! The operator must refer to these

Thank you for purchasing the Lightmeter Data Logger Model 1110. For best results from
your instrument:



read these operating instructions carefully



comply with the precautions for use

instructions whenever this danger symbol appears.
Information or useful tip.
Battery.

Magnet.

The product has been declared recyclable after analysis of its life cycle
in accordance with the ISO14040 standard.

AEMC has adopted an Eco-Design approach in order to design this
appliance. Analysis of the complete lifecycle has enabled us to control
and optimize the effects of the product on the environment. In particular
this appliance exceeds regulation requirements with respect to recycling
and reuse.

Indicates conformity with European directives and with regulations
covering EMC.

Indicates that, in the European Union, the instrument must undergo
selective disposal in compliance w ith Dire ctive WEEE 2002/96/EC. This
instrument must not be treated as household waste.

Precautions

This instrument is compliant with safety standard IEC 61010-2-030, for voltages up to 5V
with respect to ground. Failure to observe the following safety instructions may result in
electric shock, fire, explosion, and damage to the instrument and/or the installation in
which it is located.



The operator and/or the responsible authority must carefully read and clearly
understand all precautions to be taken prior to using the instrument. Thorough
knowledge and awareness of electrical hazards are essential when using this
instrument.



Observe the conditions of use, including temperature, relative humidity, altitude,
pollution degree, and location of use.



Do not use the instrument if it appears damaged, incomplete, or improperly
closed.



Before each use, check the condition of the housing and accessories. Any item on
which the insulation is deteriorated (even partially) must be set aside for repair or
disposal.



All troubleshooting and metrological checks must be done by accredited
personnel.

2