AEG-Electrolux ZB2805 User Manual

1

Thank you for choosing an Electrolux UniRapido vacuum cleaner. UniRapido is a rechargeable stick vacuum cleaner intended for use
on light dry household debris. In order to ensure the best results, always use original Electrolux accessories. They have been
designed especially for your vacuum cleaner.

BEFORE STARTING

• Unpack all details and check that the package includes all accessories relating to your UniRapido.

• Read the Instructions for Use carefully.

• Pay special attention to Safety advice chapter.

Enjoy your Electrolux UniRapido!

TABLE OF CONTENTS

Unpacking and charging 3-4
Cleaning the filters and dustcontainer 5
Cleaning brush roll, wheels and bellows 6
Removing the batteries and disposal 7
Safety precuations 8
Consumer information 9

DESCRIPTION OF YOUR UNIRAPIDO

1 Soft touch handle
2 On/off button
3 Charging/running indicator light
4 Container release button
5 Dust container
6 Parking rubber knob
7 Locking screw
8 Brush roll
9 Brush roll release button
10 Hatch cover for brush roll
11 Fine filter (inner filter)
12 Pre filter (outer filter)
13a Charging station, floor unit
13b Charging station, wall unit
14 Adaptor

2

UNPACKING AND ASSEMBLY

1 Fit the handle by carefully inserting it

into the lower main body Make sure
that the cable does not jam.

2 Secure the handle by tightening the

locking screw supplied Use a
screwdriver or a coin.

CHARGING STATION

1 Position the charging station close to

a mains (well away from heat
sources, direct sunlight or wet
places) Insert the adaptor into the
mains socket and connect it to the
charging station.

2 The wall unit can also be mounted on

a wall Always ensure that the wall
can bear the weight of UniRapido.

3

CHARGING

UNPACKING AND CHARGING

First use: up to 24 hours charging
Fully discharged: 16 - 24 hours charging

1 Place UniRapido in the charging

station always make sure that
UniRapido is turned off when placed
in the charging station .

START/STOP

2 charging!

2 Charging!

VACUUMING FLOORS AND CARPETS

Avoid scratching sensitive areas by
checking that nozzle wheels and brush
roll are clean.

Leave UniRapido on charge when not in
use. Warm adaptor is normal.

1 Start UniRapido by pushing the on/off

button

A Press for start/stop (Start on

maximum cleaning power)

B Press for intermediate power

4