Page 1
LAVATHERM T57800
Condensation dryer
User Information
PERFEKT IN FORM UND FUNKTION
125987210.qxp 2006-12-04 10:12 Page 1
Page 2
2
Dear customer,
Please read these operating instructions carefully and pay particular
attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and
pass it on to any future owners.
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct
functioning of the appliance.
This symbol guides you, step by step, in the operation of the appliance.
The information marked with this symbol provides additional instruc-
tions and practical tips on the use of the appliance.
Tips and information about economical and ecological use of the
machine are marked with the clover symbol.
Should any problems arise, this booklet provides instructions on how to
solve them by yourself; see section “Something not working?”.
If this information is not sufficient, please contact our nearest Service
centre (address and telephone numbers are indicated on the enclosed
leaflet).
Printed on recycled paper.
People who think ecologically, act accordingly...
125987210.qxp 2006-12-04 10:12 Page 2
Page 3
3
Contents
Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Environmental tips.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Description of machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Before the first drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Sorting and preparing laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Overview of programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Switching machine on / switching light on. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Opening loading door / loading laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting the programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting additional functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting time delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Starting the programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Changing programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Removing laundry or loading laundry when necessary . . . . . . . . . . . . . . . . . 14
Drying cycle complete / removing laundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning fluff filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning the door seal.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Emptying the water reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cleaning heat exchanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cleaning the drum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Clean operating screen and housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
What to do if…. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting by yourself. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing bulb for inside light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Programming options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Technical data.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Consumption values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation and connection instructions. . . . . . . . . . . . . . . . . . . . . . . . . 24
Installation safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Removing transport safety equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Door reversal instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Special accessories... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Warranty conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
125987210.qxp 2006-12-04 10:12 Page 3
Page 4
4
Operating Instructions
Safety
Before first starting up
• Note the ”Installation and connection instructions”
• Before first starting up, check the machine for any damage incurred
during transport. Never connect up a damaged machine. If parts are
damaged, contact your supplier.
Intended use
• The dryer is intended for drying standard laundry in domestic applications.
• Conversions or modifications to the dryer are not permitted.
• The laundry must not contain flammable solvents (benzene, alcohol,
stain remover, etc.) . Risk of fire and/or explosion! Laundry which has
come into contact with such substances must be rinsed thoroughly by
hand before drying.
• When using dry-cleaning sets: Only use those products which are declared as suitable for the dryer by the manufacturer.
• Do not place items of laundry in the dryer which contain foam rubber
or materials similar to rubber. Risk of fire!
• Do not place heavily worn laundry items in the dryer. Risk of fire!
• Do not place laundry items with loose fillings (e.g. cushions) in the
dryer. Risk of fire!
• Parts with rigid components (e.g. door mats) may cover the air slots.
Risk of fire! Do not place such items in the dryer.
• Do not overfill the dryer. Risk of fire! Observe max. loading volume of
6 kg.
• Ensure that explosive objects (e.g. cigarette lighters, spray cans, etc.) do
not enter the dryer with the laundry. Risk of fire and/or explosion!
• Risk of fire: items that have been spotted or soaked with vegetable or
cooking oil constitute a fire hazard and should not be placed in the
tumble dryer.
• If you have washed your laundry with stain remover you must execute
an extra rinse cycle before loading your tumble dryer.
• Clean the micro-fine filter and fine strainer after each drying cycle.
• Do not use the machine if there are no lint filters or if these are damaged. Risk of fire!
• Clean the heat exchanger regularly.
• With stacked washer and dryer: Do not place objects on the dryer. These
may fall off during operation.
• The covering bonnet of the bulb for the drum light must be screwed
down tightly.
125987210.qxp 2006-12-04 10:12 Page 4
Page 5
5
Child safety
• Keep packaging away from children. Risk of suffocation!
• Children can often not see the dangers associated with electric machines. Never leave unsupervised children near the dryer.
• Ensure that children and small animals cannot climb into the dryer’s
drum. Risk of death! Keep the dryer door shut whenever it is not being
used.
General safety
• Only specialists may undertake repairs on the dryer.
• Never start up the dryer if the mains cable is damaged or if the operating screen, operating plate or base area are damaged so that the inside of the machine is open and accessible.
• Switch off the dryer before all cleaning, care or maintenance work. Also
disconnect the mains plug from the socket or – with permanent
connections – switch off the LS switch in the fuse box and/or fully
unscrew the screwed-in fuse.
• Disconnect the machine from the power supply during long pauses in
operations.
• When removing from the socket, never pull the mains plug by the cable,
instead take a hold of the plug.
• Manifold plugs, couplings and extension cables must not be used. Risk
of fire from overheating!
• Do not spray down the dryer with jets of water. Risk of electric shock!
• Do not lean on the open door. The machine may tip over.
• Once the drying cycle has been interrupted, the laundry and drum may
be hot. Risk of burns! Take care when removing the laundry
125987210.qxp 2006-12-04 10:12 Page 5
Page 6
6
Disposal
Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at the community waste disposal facilities.
Old appliance
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly , you will help pr event potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
Warning! Remove mains plug from socket when you have no further
use for the machine. Cut off mains cable and dispose of together with
plug.
Destroy loading door lock. Children cannot then lock themselves in the
machine and put their lives at risk.
125987210.qxp 2006-12-04 10:12 Page 6
Page 7
7
Environmental tips
• In the dryer, laundry becomes fluffy and soft. Fabric softeners are not
therefore needed when washing.
• Your dryer will function most economically if you:
– always keep the ventilation slots on the base of the dryer
unobstructed;
– use the loading volumes specified in the programme overview;
– ensure you have good ventilation in the installation room;
– clean the micro-fine filter and fine strainer after each drying
cycle;
– spin the laundry well before drying. Example: Consumption data –
depending on spinning speed – for 6kg of laundry, dried using the
COTTONS STORAGE DRY programme.
Pre-draining Drying cycle
Revolutions
per minute
in litres
Energy
in kWh
Costs
in euros
1)
in liters as a %
800 4,2 70 4,2 0,63
1000 3,6 60 3,6 0,54
1200 3,2 53 3,2 0,48
1400 3,0 50 3,0 0,45
1800 2,5 42 2,5 0,38
1) Tariff: 0.15 Euro/kWh
125987210.qxp 2006-12-04 10:12 Page 7
Page 8
8
Description of machine
Operating screen
Display showing
level of dryness
INTENSITY button
DELAY TIMER
button
Multi-display
Programme progress display
Programme selector
Block of buttons
and displays
Maintenance displays
- HEAT EXCHANGER (clean!)
- EMPTY WATER (empty!)
- CLEAN FILTER (clean lint filter!)
125987210.qxp 2006-12-04 10:12 Page 8
Page 9
9
Before the first drying cycle
In order to remove any residue which may have been produced during
production, wipe the dryer drum with a damp cloth or undertake a
brief drying cycle (30 MIN) with damp cloths.
Sorting and preparing laundry
Sorting laundry
• Sort by fabric type:
• Sort by fabric type:
– Cotton/linen for programmes in COTTONS programme
group.
– Mixtures and synthetics for programmes in EASY CARES pro-
gramme group.
• Sorting by care label. The care labels mean:
Basic drying in
tumble dryer
possible
Drying at
normal
temperature
Drying at reduced temperature
(press SPECIAL CARE button!)
Drying in tumble
dryer not possible
• Do not dry new, coloured textiles together with light-coloured laundry
items. Textile colours may bleed.
• Do not dry tricot or knitted items with the EXTRA DRY programme.
Items may become stuck!
• Do not dry wool in the dryer. May become entangled! After air-drying,
wool may be dried with the WOOL CARE programme.
Preparing laundry
• To avoid laundry becoming tangled: Close zips, button up coverings and
tie loose bands or ribbons (e.g. of aprons).
• Empty pockets. Remove metallic items (paperclips, safety pins etc).
• Turn items with double-layered fabrics inside out (e.g. with cottonlined
anoraks, the cotton layer should be outermost). These fabrics will then
dry better.
125987210.qxp 2006-12-04 10:12 Page 9
Page 10
10
Programme
max. loading volume
(weight when dry)
Additional
functions
Application/properties
Care
symbols
SPECIAL CARE
AUDIBLE SIGNAL
SENSITIVE
1)
INTENSITY
COTTONS
EXTRA DRY
6 kg • • • •
Drying thick or multi-layered
textiles, e.g. terry towelling
items, bathing costumes.
INTENSIVE
DRY
6 kg • • • •
Drying thick textiles, e.g. terry
towelling items, towels.
STORAGE
DRY
6 kg • • • •
Drying textiles of even thicknesses,
e.g. terry towelling items,
knitted items, towels.
DAMP
6 kg • • • •
For thin textiles which are still
to be ironed, e.g. knitted items,
cotton shirts.
HAND IRON
6 kg • • • •
For normal thickness cotton or
linen laundry, e.g. bedding, table
linen.
MACHINE
IRON
6 kg • • • •
For cotton or linen laundry
which are still to be put through
a machine, e.g. bedding, table
linen.
EASY CARES
EXTRA DRY
3 kg
• • • •
Drying thick or multi-layered
textiles, e.g. pullovers, bedding,
table linen.
STORAGE
DRY
3 kg
• • • •
For thin textiles which are not
ironed, e.g. easy care shirts, table
linen, baby’s clothes, socks, corsetry.
DAMP
3 kg
• • • •
For thin textiles which are still
to be ironed, e.g. knitted items,
cotton shirts.
Overview of programmes
125987210.qxp 2006-12-04 10:13 Page 10
Page 11
11
Programme
max. loading volume
(weight when dry)
Additional
functions
Application/properties
Care
symbols
SPECIAL CARE
1)
AUDIBLE SIGNAL
SENSITIVE
1)
INTENSITY
30 MIN 1 kg • • - -
For drying individual items of laundry
or for small volumes of less than 1kg.
LEISURE
6 kg • • • •
Special programme for leisure cloth-ing, such
as jeans, sweat-shirts, etc., of different material thicknesses (e.g. at the cuffs and seams).
EASY IRON
1 kg • • - -
Special programme with anti-crease
mechanism for easy care textiles such
shirts and blouses; for minimum ironing
effort. The result depends on the
type and quality of textiles. (The loading
volume corresponds to approx. 5 to
7 shirts.)
Recommendation: Place textiles in the
dryer straight after spinning. Once
dried, immediately remove textiles and
place on clothes hanger.
WOOL CARE
1 kg • • - -
Special programme for briefly treating
woollens with warm air after they have
been dried naturally, worn or stored for
long periods. Wool fibres are aligned
and the wool becomes soft and snugly.
Recommendation: Remove textiles immediately after drying.
REFRESH
1 kg • • - -
Special programme, lasting around 35 minutes, for refreshing or gently cleaning textiles
with commercially available dry cleaning sets.
(Only use those products which are declared
as suitable for the drier by the manufacturer;
please observe the manufacturer’s instructions for use.)
125987210.qxp 2006-12-04 10:13 Page 11
Page 12
12
Drying
Switching machine on / switching light on
Turn the programme selector to any programme or turn it to LIGHT. The
machine has been switched on. When the loading door is opened, the drum is
illuminated.
Opening loading door / loading laundry
1.Open loading door:
Use force to push against the loading door (push point )
2. Load your laundry (do not force it in).
Caution! Do not jam laundry in between the loading door and rubber seal.
3. Close loading door securely. Lock must audibly lock.
Selecting the programme
Use the programme selector to set
the programme you require.
Selecting additional functions
INTENSITY
Precise setting of humidity contentof laundry. Laundry becomes dryer
from + to +++.
1. Press the INTENSITY button
as many times as necessary until
the small light at the level of residual dampness required is illuminated.
If required, press the AUDIBLE
SIGNAL, SPECIAL CARE or
SENSITIVE buttons.
125987210.qxp 2006-12-04 10:13 Page 12
Page 13
13
AUDIBLE SIGNAL
When the drying cycle has finished, an intermittent audible signal will
sound.
SPECIAL CARE
For especially gentle drying of sensitive fabrics with the care label
and for temperature-sensitive textiles (e.g. acrylic, viscose). Programme
is executed with reduced heat.
SPECIAL CARE is only suitable for use with loads of up to 3 kg!
SENSITIVE
For gentle drying of frequently-worn textiles. Programme starts on full heat
setting, which is then reduced towards the end of the programme to ensure gentle care of laundry.
SPECIAL CARE and SENSITIVE cannot be selected together.
Setting time delay
With the DELAY TIMER button, you can delay the start of a programme by
between 30 minutes (30' and a maximum of 23 hours (23h).
1. Select the programme
2. Press the DELAY TIMER button as many times as necessary until the
required start delay appears on the multi display, e.g. 12h if the
programme is to be started in 12 hours. The DELAY TIMER display is
illuminated.
If 23h is displayed and you press the button again, the time delay will be
cancelled. The display will show 0' and then the duration of the selected
programme.
3. To activate the delay timer, press the START/PAUSE button. The amo
unt
of time remaining until the programme is set to start is continuously
displayed (e.g. 12h, 11h, 10h, 30' etc).
Until the start of the programme the drum is moved at longish intervals
to loosen the laundry
Starting the programme
Press the START/PAUSE button. The programme is started.
The programme progress display and the display showing the level of
dryness show drying progress.
125987210.qxp 2006-12-04 10:13 Page 13
Page 14
14
Changing programme
To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF and then reset
the programme.
The programme can no longer be changed directly once the programme has
started. If nevertheless there is an attempt to change the programme on the
programme knob, the programme progress display and the maintenance indicators flash. If an option button (excluding the AUDIBLE SIGNAL button)
is pressed, the corresponding indicator flashes several times. The drying programme is not however affected by this (laundry protection).
Removing laundry or loading laundry when necessary
1. Open loading door
Warning! Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must audibly lock.
4. Press the START/PAUSE button to continue the drying cycle.
Drying cycle complete / removing laundry
Once the drying cycle is complete, the END and CREASE GUARD
displays light up. If the AUDIBLE SIGNAL button has been pressed,
an audible signal sounds intermittently.
The drying cycle is automatically followed by a crease guard phase
which lasts around 30 minutes. The drum rotates in intervals during this
phase. The laundry thereby remains relaxed and free of creases. The
laundry can be removed at any time during the crease guard phase. (The
laundry should be taken out towards the end of the crease guard phase
at the latest to prevent creases from forming.)
1. Open loading door
2. Before removing the laundry, remove lint from the micro-fine filer . It
is best to use a damp hand for this purpose (refer to “Cleaning and
maintenance” section).
3. Remove laundry.
4. Turn the programme selector to OFF.
Important! After each drying cycle
– clean the micro-fine filter and fine strainer,
– drain the condensate tank
(refer to the “Cleaning and maintenance” section).
5. Close loading door
125987210.qxp 2006-12-04 10:13 Page 14
Page 15
15
Cleaning and maintenance
Cleaning fluff filter
To ensure that the dryer works perfectly, the fluff filters (micro-fine filter
and fine strainer) must be cleaned after every drying cycle.
Caution! Never operate the dryer without fluff filters or with damaged
or blocked fluff filters.
1. Open loading door
2. Use a damp hand to clean the
microfine filter, which is built into
the lower part of the loading
aperture.
3. Push down unlock button on
large mesh filter. Large mesh filter
jumps up.
4. Take out fine strainer.
5. Remove fluff from fine strainer.
It is best to use a damp hand for
this purpose.
125987210.qxp 2006-12-04 10:13 Page 15
Page 16
16
Clean the entire filter area
The strainer area does not have to be cleaned after every drying cycle,
but should be checked regularly and cleaned of fluff if necessary.
6. To do this, grip the top of the large
mesh filter and pull it forwards
until it comes loose from the two
brackets.
7. Remove fluff from the entire filter
area. It is best to use a vacuum
cleaner for this purpose.
8. Press both journals of the large
mesh filter into the brackets on the
loading door until they snap into
place.
9. Re-insert fine strainer.
10. Press against the large mesh filter
until it locks into the interlock.
If the fine strainer is not fitted,
the large mesh filter will not snap
into place and the loading door
cannot be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cycle
has finished.
125987210.qxp 2006-12-04 10:13 Page 16
Page 17
17
Emptying the water reservoir
Empty condensate tank after every drying cycle.
If the condensate tank is full, an active programme will break off automati-
cally and the EMPTY WATER display will light up. In order to continue
the programme, the condensate tank must first be emptied.
Warning! The condensate is not suitable for drinking or for preparing
foodstuffs.
1.Take out drawer containing
condensed water container
completely (1) and pull up the
condensed water container’s
drainage pipe as far as it will go (2).
2.Pour condensed water out into
a basin or similar receptacle.
3.Slide outlet connections in and
refit condensate tank. If the
programme has been interrupted as a result of the condensate tank being full: Press the
START/PAUSE button to
continue the drying cycle.
The water reservoir has a volume of approx. 4 litres. This is sufficient for ar ound 6 kg of laundry which has previously been spun at 800 revolutions/
minute.
The condensate can be used as distilled water, e.g. for steam ironing. However first filter the condensate (e.g. with a coffee filter) to remove any residue and small pieces of fluff.
125987210.qxp 2006-12-04 10:13 Page 17
Page 18
Cleaning heat exchanger
If the HEAT EXCHANGER display is illuminated, the heat exchanger needs to be
cleaned.
Caution! Operating when the heat exchanger is clogged with lint can dama-
ge the dryer. This also increases energy consumption.
1.Open loading door
2.Open base door. To do this, press the
release button on the bottom of the
loading opening and open the door to the
left.
3.Remove lint from the inside of the door
and the heat exchange chamber. Wipe the
door seal with a damp cloth.
4. Turn both lock washers inwards.
5. Use the handle to pull the heat exchanger out of the base and carry it horizontally to prevent any remaining water from
spilling.
6.To empty the heat exchanger, hold
vertically over a washing-up bowl.
Caution! Do not use sharp objects to
clean. The heat exchanger could
develop leaks.
7. Clean heat exchanger.
It is best to use a brush or to rinse
thoroughly with a shower head.
8. Replace heat exchanger and lock into
place (turn both lock washers
outwards until they snap into place).
9. Close base door.
The dryer will not operate if the HEAT EXCHANGER indicator is still lit.
Caution! Never operate the dryer without the heat exchanger.
18
125987210.qxp 2006-12-04 10:13 Page 18
Page 19
19
Cleaning the drum
Caution! Do not use abrasives or steel wool to clean the drum.
Lime in the water or cleaning agents may form a barely visible lining on the
inside of the drum. The degree to which the laundry has been dried is then
no longer detected reliably. The laundry is damper than expected when
removed from the dryer.
Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down
the inside of the drum and drum ribs.
Clean operating screen and housing
Caution! Do not use furniture cleaners or aggressive cleaning agents to
clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if …
Troubleshooting by yourself
If, during operation, the error code (E plus number or letter) appears on
the multi-display: Switch the machine off and on again. Reset programme. Press the START/PAUSE button
If the error is still displayed, please inform your local Service Force Centre and quote the error code.
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged
in or fuse is not working
correctly.
Plug in at mains socket.
Check fuse in fuse box
(domestic installation).
Loading door is open. Close loading door.
Have you pressed the
START/ PAUSE button?
Press the START/PAUSE
button again.
125987210.qxp 2006-12-04 10:13 Page 19
Page 20
20
Problem Possible cause Remedy
Drying results
unsatisfactory.
Wrong programme selected.
Select a different programme the next time you dry
(see “Overview of program-
mes” section).
Lint filter clogged. Clean lint filter.
Heat exchanger clogged
with lint.
Clean heat exchanger.
Overloading of laundry.
Observe recommended loa-
ding volumes.
Ventilation slots in base
area covered up.
Uncover ventilation slots in
base area.
Residue on inside surface of
drum or drum ribs.
Clean inside surface of
drum and drum ribs.
Make an adjustment using
the INTENSITY function
(see chapter ”Drying, Selec-
ting additional functions”).
Loading door does not
open with DOOR button.
Mains plug disconnected.
Plug in at mains socket.
Programme selector in OFF
position.
Set programme. Loading
door can be opened at any
time by exerting pressure on
the door.
Loading door does not
close.
Fine strainer not in place
and/or large mesh filter not
locked in place.
Install fine strainer and/or
snap large mesh filter into
place.
When pressing a button,
the corresponding
button flashes several
times.
Washing protection. After
the start of the programme,
the option can no longer be
set.
Turn the programme knob
to OFF Set the programme
again.
Drum light does not
work.
Programme selector in OFF
position.
Turn programme selector to
LIGHT or to any pro-
gramme.
Defective light bulb.
Replace light bulb (see next
section).
PROGRAMME TIME display changes erratically or
stays unchanged for a long
time.
Programme time is corrected automatically depending on type and volume of
laundry and level of dampness.
Automatic process; this is
not a machine fault.
Programme inactive,
EMPTY WATER display
illuminated.
Condensate tank is full.
Empty condensate tank,
then start programme with
START/PAUSE button.
125987210.qxp 2006-12-04 10:13 Page 20
Page 21
21
Changing bulb for inside light
Only use a special bulb which is designed specially for dryers. The special bulb
is available from the after-sales service, ET-Nr. 112 552 000-5.
Warning! Do not use standard bulbs! These develop too much heat and
may damage the machine!
Warning! Before replacing the bulb, disconnect the mains plug; with a
permanent connection: fully unscrew or deactivate the fuse.
1. Unscrew covering bonnet from above bulb (this can be found directly behind
the loading aperture, at the top; refer to “Description of machine” section.)
2. Replace defective bulb.
3. Screw covering bonnet back down.
Warning! For reasons associated with safety, the covering bonnet must
be screwed down tightly. If this is not done, the dryer must not be operated.
Problem Possible cause Remedy
Drying cycle lasts an
unusually long time.
Note:
After around 5 hours
the drying cycle ends
automatically (see
„Drying cycle complete“).
Lint filter clogged. Clean lint filter.
Heat exchanger clogged
with lint.
Clean heat exchanger.
SPECIAL CARE
button pressed and load
volume too big.
SPECIAL CARE is only
suitable for use with
loads of up to 3 kg!
Load volume too big. Reduce load volume.
Laundry insufficiently predrained.
Laundry must be adequately
pre-drained.
Drying cycle ends
shortly after programme
starts. END display illuminated.
Not enough washing loaded
or washing loaded is too
dry for selected programme.
Select time programme or
higher drying level (e.g.
INTENSIVE DRY instead
of STORAGE DRY).
125987210.qxp 2006-12-04 10:13 Page 21
Page 22
22
Programming options
Objective Implementation
Permanently programme
in the audible signal
which reminds you that
the programme is complete.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL button and hold down for
approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
Adjust “level of dryness”
detection:
If the laundry is slightly
drier or slightly damper
at the end of the programme
than with the
standard setting.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at
the same time and hold down for approx. 5 seconds. The cur-
rent setting appears on the multi-display:
–C0: Setting for drier laundry
–C1: Standard setting
–C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting required
appears on the multi-display.
4. Turn the programme selector to OFF.
The setting is permanently programmed.
To deactivate the EMPTY
WATER display when using
an external drain for
the condensed water.
1. Turn the programme selector to any programme.
2. Press the DOOR and SPECIAL CARE buttons at the
same time and hold down for approx. 5 seconds. The multidisplay briefly displays ”0”
The EMPTY WATER display is permanently deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays ”1” (rather than
”0”).
125987210.qxp 2006-12-04 10:14 Page 22
Page 23
23
Technical data
This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Height x width x depth
85 x 60 x 60 cm
Depth with loading door open
109 cm
Height can be adjusted by
1,5 cm
Weight when empty
approx. 40kg
Loading volume (depends on programme)
1)
max. 6 kg
Energy consumption in accordance with IEC 1121 s. e.
(6 kg of cotton, pre-drained at 1000 rpm, COTTONS
STORAGE DRY programme)
3,6 kWh
Use
Domestic
Use
+ 5°C à + 35°C
1) Different loading volume data may be needed in some countries as a result of different
measuring methods.
Consumption values
The consumption values have been established under standard conditions.
They may deviate when the machine is operated in domestic circumstances.
Programme
Loading volume
in kg
Energy consumption
in kWh
COTTONS STORAGE DRY
1)
6
3,6
COTTONS HAND IRON
1)
6
2,9
EASY CARES STORAGE DRY
2)
3
1,3
1) pre-drained at 1000 rpm
2) pre-drained at 1200 rpm
125987210.qxp 2006-12-04 10:14 Page 23
Page 24
24
Installation and connection instructions
Installation safety instructions
• Before first starting up, all parts of the transport safety equipment must be
removed. The machine may otherwise be damaged.
• Before starting up for the first time, ensure that the nominal voltage and
type of current specified on the machine type plate match the nominal voltage and type of current at the installation site. The electrical fuses required
can also be found on the type plate.
• Always connect the plug into a protection contact socket which has been
installed as specified.
• With permanent connections: A permanent connection may only be esta-
blished by an authorised specialist electrician.
• Do not install machine in rooms at risk of frost.
• Ensure that the door of the machine cannot be blocked by interior doors of
the house or the doors of other appliances.
• Do not install on carpets with high piles. Air circulation will be hindered at
the ventilation slots.
• Ensure that the machine is not placed on its mains cable.
• Install the machine horizontally.
125987210.qxp 2006-12-04 10:14 Page 24
Page 25
25
Removing transport safety equipment
Caution! Before first starting up,
all parts of the transport safety
equipment must be removed.
1. Open loading door
2. Pull off adhesive strips from inside
machine on top of drum.
3. Remove foil hose and polystyrene
padding from the machine.
125987210.qxp 2006-12-04 10:14 Page 25
Page 26
26
Door reversal instructions
Warning! The door stop may only be changed by a specialist. If
necessary,please contact our after-sales service or your specialist dealer.
Warning! Before changing the door stop, disconnect the mains plug;
with a permanent connection: fully unscrew or deactivate the fuse.
1. Open loading door .
2. Unscrew hinge A from the front ofthe
machine and take off the loading door.
3. Remove cover plates B and C. To do this,
insert a thin screwdriver into the slots as
shown in the illustration, press downwards slightly and pry out the cover
plates.
4. Use an appropriate tool and exert pres-
sure to unfasten locking block D from
the snap-on fixture, take out and reinsert on the other side, having rotated the
block through 180°.
5. Unscrew hinge A from the loading door,
rotate through 180°, reinsert on the
opposite side and screw down.
6. Reinsert cover plates B and C on the
opposite site having first rotated them
through 180°.
7. Unscrew cover plates E from the front of
the machine, rotate through 180, screw
on the opposite side.
8. Unscrew door lock F, push down slightly
and remove from the front of the
machine.
9. Press snap-in button G in and down,
press cover down slightly and remove
from front of the machine.
10. Transfer door lock F to the oppositesi-
de and screw down.
11. Fix cover G on to the other side and
allow the snap-in button to lock in
place.
12. Insert loading door and hinges into recesses on the front of the machine
and screw down.
125987210.qxp 2006-12-04 10:14 Page 26
Page 27
27
Special accessories
The following special accessories are available from your Service Force Centre or your specialist dealer:
Intermediate installation kits for stacked
washer and dryer:
These intermediate installation kits can be used to arrange the dryer and
an automatic AEG-Electrolux washing machine (60cm wide, front loading) as a space-saving washer/dryer stack. The automatic washing
machine is at the bottom and the dryer is at the top.
Two versions can be supplied:
– without stacker plate 916.018 902
– with extractable stacker plate 916.018 903
Installation kit for external condensate drain
Installation kit (125 122 510) for direct draining of condensate into a
basin, siphon, gully, etc. The condensate tank then no longer has to be
drained, it must however remain in its intended position in the machine. Refer to the “Programme options” section for how to deactivate the
EMPTY WATER display. Max. displacement height: 1m from the base of
the dryer; max. displacement length: 3m
125987210.qxp 2006-12-04 10:14 Page 27
Page 28
28
Warranty conditions
Great Britain
We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or
any part thereof is proved to be defective by reason only of faulty workmanship or materials, we
will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage
on condition that:
• The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer's operating and maintenance instructions.
• The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us.
• All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part
replaced shall become the Company's property.
• This guarantee is in addition to your statutory and other legal rights.
• Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in
which case a premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
• Products of AEG manufacture which are not marketed by AEG.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to
your new home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use
for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within the European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.
• The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details
of your new home. They will then ensure that the local Service Organisation is aware of your
move and able to look after you and your appliances.
France Senlis +33 (0) 3 44 62 29 29
Germany Nürnberg +49 (0) 800 234 7378
Italy Pordenone +39 (0) 800 117511
Sweden Stockholm +46 (0) 8 672 5360
UK Slough +44 (0) 1753 219899
125987210.qxp 2006-12-04 10:14 Page 28
Page 29
29
Service and Spare Parts
If the event of your appliance requiring service, or if you wish to purchase
spare parts, please contact Service Force by telephoning:
00887700 55 992299 992299
Your telephone call will be automatically routed to the Service Force
Centre covering your post code area.
For the address of your local Service Force Centre and further information
about Service Force, please visit the website at
www. serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details
under the heading „What to do if...“
When you contact the Service Force Centre you will need to give the
following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model and serial number of the appliance (found on the rating plate)
5. The purchase date.
Please note that a valid purchase receipt
or guarantee documentation is
required for in-guarantee service
calls.
Customer Care
For general enquiries concerning
your AEG-Electrolux appliance, or
for further information on AEGElectrolux
products please contact
our Customer Care Department by
letter or telephone at the address below or visit our website at
wwwwww..aaeegg..ccoo..uukk..
(*) Calls may be recorded for training purposes
Customer Care Department
AEG-Electrolux
Domestic Appliances
55-77 High Street
Slough
Berkshire, SL1 1DZ
Tel: 08705 350350 (*)
For Customer Service in the Republic
of Ireland please contact us at the
address
below:
AEG/ Electrolux Group (Ire) Ltd
Long Mile Road/ Dublin 12
Republic of Ireland
Tel: +353 (0) 1 4090754
Email: service.eid@electrolux.ie
125987210.qxp 2006-12-04 10:14 Page 29
Page 30
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg.hausgeraete.de
© Copyright by AEG
125987210-01-241106-01
From the Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdooruse. More than 55 million Electrolux Group products (such as refrigerators,cookers, washing machines,vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in morethan 150 countries around the world.
125987210.qxp 2006-12-04 10:14 Page 30
Loading...