Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional
design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best
performance and control - indeed we are setting the highest standards of
excellence.
In addition to this you find environmental and energy saving aspects as an integral
part of our products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we recommend
you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
The following symbols are used in this user manual:
Important information concerning your personal safety and information on how
to avoid damaging the appliance.
General information and tips
Environmental information
Contents
3
Contents
Operating Instructions 5
Important safety information 5
Product description 8
Control panel 9
Before first use 10
Sorting and preparing laundry 10
Programme overview 12
Daily use 14
Switching machine on 14
Opening loading door / loading laundry 14
Selecting the programme 14
DELICATE (DELICAAT) function 14
LONG ANTI-CREASE (ANTIKREUK LANG) function 15
BUZZER (ZOEMER) function 15
CHILD LOCK function 16
Starting the programme 16
Changing programme 17
Putting in extra items or taking items out before end of programme 17
Drying cycle complete / removing laundry 17
Care and cleaning 19
Cleaning fluff filter 19
Cleaning the door seal 21
Emptying the condensate tank 21
Cleaning heat exchanger 22
Cleaning the drum 23
Clean operating screen and housing 24
What to do if ... 25
Troubleshooting by yourself 25
Machine settings 27
Technical data 28
136900650-00-19092007
Contents
4
Consumption values 28
Hints for test institutes 29
Installation 29
Appliance positioning 29
Removing transport safety packaging 30
Electrical connection 30
Changing door stop 31
Special accessories 32
Environment 33
Packaging material 33
Old appliance 33
Environmental tips 34
Service 35
Important safety information
Operating Instructions
Important safety information
In the interest of your safety and to ensure the correct use, before installing
and first using the appliance, read this user manual carefully, including its
hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar
with its operation and safety features. Save these instructions and make
sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use
and safety.
General safety
• It is dangerous to alter the specifications or attempt to modify this product in
any way.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Make sure that small pets do not climb into the drum. To avoid this, please check
into the drum before using.
• Any objects such as coins, safety pins, nails, screws, stones or any other hard,
sharp material can cause extensive damage and must not be placed into the
machine.
• In order to avoid danger of fires caused by excessive drying, do not use appliance
to dry the following items: Cushions, quilts and the like (these items accumulate
heat).
• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber
backed articles and clothes or pillows fitted with foam rubber pads should not
be dried in the tumble dryer.
• Always unplug the appliance after use, clean and maintenance.
• Under no circumstances should you attempt to repair the machine yourself.
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare
parts.
5
Important safety information
6
• Items that have been soiled with substances such as cooking oil acetone, petrol,
kerosene, spot removers, turpentine, waxes and wax removers should be washed
in hot water with an extra amount of detergent before being dried in the tumble
dryer.
•
Danger of explosion: Never tumble dry items that have been in contact with
inflammable solvents (petrol, methylated spirits, dry cleaning fluid and the like).
As these substance are volatile, they could cause an explosion. Only tumble dry
items washed with water.
•
Risk of fire: items that have been spotted or soaked with vegetable or cooking
oil constitute a fire hazard and should not be placed in the tumble dryer.
• If you have washed your laundry with stain remover you must execute an extra
rinse cycle before loading your tumble dryer.
• Please make sure that no gas lighters or matches have accidentally been left in
pockets of garments to be loaded into appliance
WARNING!
Never stop a tumble dry before the end of the drying cycle unless all items are
quickly removed and spread out so that the heat is dissipated.
Installation
• This appliance is heavy. Care should be taken when moving it.
• When unpacking the appliance, check that it is not damaged. If in doubt, do not
use it and contact the Service Centre.
• All packing and transit bolts must be removed before use. Serious damage can
occur to the product and to property if this is not adhered to. See relevant section
in the user manual.
• The final part of a tumble dryer cycle occurs without heat ( cool down cycle ) to
ensure that the items are left at a temperature that ensures that items will not
be damaged.
• Any electrical work required to install this appliance should be carried out by a
qualified electrician or competent person.
• Care must be taken to ensure that the appliance does not stand on the electrical
supply cable.
• If the machine is situated on a carpeted floor, please adjust the feet in order to
allow air to circulate freely.
• After having installed the appliance, check that it is not pressing or standing on
its electrical supply cable.
Important safety information
• If the tumble dryer is placed on top of a washing machine, it is compulsory to
use the stacking kit (optional accessory).
Use
• This appliance is designed for domestic use. It must not be used for purposes
other than those for which it was designed.
• Only wash fabrics which are designed to be machine dried. Follow the instructions on each garment label.
• Do not dry unwashed items in the tumble dryer.
• Do not overload the appliance. See the relevant section in the user manual.
• Clothes which are dripping wet should not be placed in the dryer.
• Garments which have been in contact with volatile petroleum products should
not be machine dried. If volatile cleaning fluids are used, care should be taken
to ensure that the fluid is removed from the garment before placing in the
machine.
• Never pull the power supply cable to remove the plug from the socket; always
take hold of the plug itself.
• Never use the tumble dryer if the power supply cable, the control panel, the
working surface or the base are damaged so that the inside of the tumble dryer
is accessible.
• Fabric softeners, or similar products should be used as specified by the fabric
softener instructions.
Child safety
• This machine is not intended for use by young children or infirm persons without
supervision.
• Children should be supervised to ensure that they do not play with the appliance.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to
children - danger of suffocation! Keep them out of children’s reach.
• Keep all detergents in a safe place out of children’s reach.
• Make sure that children or pets do not climb into the drum.
7
Product description
8
Product description
2
5
6
8
11
1 Control panel
2 Drawer with condensed water container
3 Fine strainer (lint filter)
4 Large mesh filter (lint filter)
5 Micro-fine filter (lint filter)
6 Rating plate
7 Loading door (reversible)
8 Base door upstream of heat exchanger
9 Button for opening door in plinth
10 Air slots
11 Screwed feet (with height adjustment)
1
3
4
7
9
10
Control panel
1
Programme knob and OFF UIT switch
2 Function buttons
3
START PAUSE START PAUZE button
4 Display
5 Function and warning leds
Control panel
54
321
9
Before first use
10
Before first use
In order to remove any residues which may have been produced during production,
wipe the dryer drum with a damp cloth or carry out a brief drying cycle (30 MIN)
with damp cloths in the machine.
Sorting and preparing laundry
Sorting laundry
• Sort by fabric type:
–
Cotton/linen for programmes in COTTONS KATOEN programme group.
–
Mixtures and synthetics for programmes in SYNTHETICS SYNTHETISCH programme group.
• Sorting by care label. The care labels mean:
Drying in the tumble
dryer possible in prin-
ciple
Dry at normal
temperature
Dry at reduced
temperature (press
DELICATE DELICAAT
button!)
Drying in the tumble
dryer not possible
Do not place in the appliance any wet laundry which is not specified on the care
label as being suitable for tumble-drying.
This appliance can be used for all wet laundry items which are labelled as suitable
for tumble-drying.
• Do not dry new, coloured textiles together with light-coloured laundry items.
Textile colours may bleed.
• Do not dry cotton jersey and knitwear with the EXTRA programme. Items may
shrink!
• Do not dry wool in the dryer. May become entangled! After air-drying, wool may
be dried with the WOOL CARE WOL programme.
Preparing laundry
• To avoid laundry becoming tangled: close zips, button up duvet covers and tie
loose ties or ribbons (e.g. of aprons).
• Turn items with double-layered fabrics inside out (e.g. with cotton-lined anoraks,
the cotton layer should be outermost). These fabrics will then dry better.
11
Programme overview
12
Programme overview
Additional
functions
Programmes
DELICATE DELICAAT
LONG ANTI-CREASE
EXTRA EXTRA
DROOG
STRONG
INTENSIEF
COTTONS KATOEN
DROOG
CUPBOARD
KASTDROOG
IRON
STRIJKDROOG
max. load (weight when dry)
7 kg•••
7 kg•••
7 kg•••
7 kg•••
Application/properties
BUZZER ZOEMER
ANTIKREUK LANG
Thorough drying of thick or multi- layered fabrics,
e.g. terry towelling items, bathrobes.
Drying thick textiles, e.g. terry towelling items,
towels.
Thorough drying of fabrics of even thicknesses, e.g.
terry towelling items, knitwear, towels.
For normal thickness cotton or linen laundry, e.g.
bedding, table linen.
Care mark
EXTRA EXTRA
DROOG
CUPBOARD
KASTDROOG
SYNTHETICS SYNTHETISCH
IRON
STRIJKDROOG
TIME
30 MIN.1 kg•••
3 kg•••
3 kg•••
3 kg•••
Thorough drying of thick or multi-layered fabrics,
e.g. pullovers, bedding, table linen.
For thin fabrics which are not ironed, e.g. easy care
shirts, table linen, baby clothes, socks, lingerie with
bones or wires.
For thin fabrics which are also to be ironed, e.g.
knitwear, shirts.
For further drying of individual items of laundry
or for small volumes of less than 1kg.
1)
1)
1)
Programmes
max. load (weight when dry)
Additional
functions
ANTIKREUK LANG
DELICATE DELICAAT
LONG ANTI-CREASE
BUZZER ZOEMER
Programme overview
Application/properties
13
Care mark
FRESHEN
UP OPFRIS-
SEN
BED LINEN
BEDLINNEN
SPECIAL
JEANS7 kg•••
SPORTS
LIGHT
LICHTE
SPORTKLEDING
EASY IRON
PLUS GE-
MAKKELIJK
STRIKEN
PLUS
WOOL
CARE WOL
1) select DELICATE DELICAAT
1 kg•••
3 kg•••
2 kg
1 kg
(or 5
shirt
s)
1 kg•-•
For refreshing or gently cleaning textiles with
commercially available dry cleaning products.
Bed linen (single and double sheet, pillowcase,
bedspread, duvet cover).
For leisure clothing, such as jeans, sweat-shirts,
etc., of different material thicknesses (e.g. at the
neck, cuffs and seams).
••
A
••
A
For sportswear, thin fabrics, polyester, which are
not ironed.
Special program with anti-crease mechanism for
easy care fabrics such shirts and blouses; for minimum ironing effort. The results depends on the
type of fabric and its finish. Place fabrics in the
dryer straight after spinning; once dried,
immediately remove fabrics and place on a clothes
hanger.
Special programme for briefly treating woollens
with warm air, after they have been dried
naturally, worn or stored for long periods. Wool
fibres stand up and the wool becomes soft and
cosy. Recommendation: Remove fabrics
immediately after drying.
A - Auto - function selected automatically.
Daily use
14
Daily use
Switching machine on
Turn the programme selector to any programme. The machine has been switched
on. Led of START PAUSE START PAUZE button is flashing.
Opening loading door / loading laundry
1. Open loading door:
Use force to push against the loading
door (push point)
2. Load your laundry (do not force it in).
CAUTION!
Do not jam laundry in between the loading door and rubber seal.
3. Close loading door securely. Lock
must audibly lock.
Selecting the programme
Use the programme selector to set the programme you require. The estimated time to
end of the programme appears in the LCD in
h:mm format (hours:minutes).
During the cycle time elapses by steps of one
minute; less than 1 hour the leading zeros are
not shown (ex. “59”, “5”, “0”).
DELICATE (DELICAAT) function
For especially gentle drying of sensitive fabrics with the care label and for
temperature-sensitive textiles (e.g. acrylic, viscose). Programme is executed with
reduced heat.
Delicate function is only suitable for use with loads of up to 3kg.
Daily use
To activate it:
1. Choose the drying programme.
2.
Press DELICATE DELICAAT button - the led
above is on.
To deselect function press again DELICATE
DELICAAT button. Led above is off.
LONG ANTI-CREASE (ANTIKREUK LANG) function
A long anti-crease phase lengthen the anti-crease phase (30 min.) at the end of
the drying additionally by 60 minutes. The drum rotates at intervals during this
phase. This keeps the laundry loose and free of creases. Phase lasts in total 90
minutes. The laundry can be removed at any time during the anti-crease phase.
To activate it:
1. Choose the drying programme.
2.
Press LONG ANTI-CREASE ANTIKREUKLANG button - the led above is on.
To deselect function press again LONG ANTICREASE ANTIKREUK LANG button. Led above
is off.
15
BUZZER (ZOEMER) function
The appliance is supplied with the BUZZER ZOEMER function deactivated.
The buzzer sounds or plays a tune when activated during:
–cycle end
– anti-crease phase and when phase starts or ends
– cycle interruption by a warning
–alarm
Daily use
16
To activate it:
1. Choose the drying programme.
2.
Press BUZZER ZOEMER button - the led
above is on.
To deselect function press again BUZZER
ZOEMER button. Led above is off.
CHILD LOCK function
The child lock can be set to prevent a programme being accidentally started or a
programme in operation being accidentally changed. The child lock function locks
all buttons and the programme knob. The child lock can be activated or deactivated
by holding down the LONG ANTI-CREASE ANTIKREUK LANG and BUZZER
ZOEMER buttons simultaneously for 5 seconds.
– Before programme is started: Appliance cannot be used
– After programme is started: Programme in operation cannot be changed
The
icon appears in the display to indicate that the child safety device is
activated.
The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety
device.
Starting the programme
Press the START PAUSE START PAUZE button.
Led above stops flashing, becomes steady. The
programme is started. Display shows elapsing
cycle time.
Daily use
17
Changing programme
To change a programme which has been selected by mistake once the programme
has started, first turn the programme selector to OFF UIT and then reset the programme.
The programme can no longer be changed directly once the programme has started.
If nevertheless there is an attempt to change the programme on the programme
knob, the programme progress display and the maintenance indicators flash. If an
option button (excluding the BUZZER ZOEMER button) is pressed, Err appears in
the multidisplay. The drying programme is not however affected by this (laundry
protection).
Putting in extra items or taking items out before end of programme
1. Open loading door.
WARNING!
Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must audibly lock.
4.
Press the START PAUSE START PAUZE button to continue the drying cycle.
Drying cycle complete / removing laundry
Once the drying cycle is complete, display shows a blinking "0". If the BUZZER
ZOEMER button has been pressed, an acoustic signal sounds intermittently for
about one minute.
The drying cycles are automatically followed by an anti-crease phase which lasts
around 30 minutes. The drum rotates at intervals during this phase. This keeps the
laundry loose and free of creases. The laundry can be removed at any time during
the anti-crease phase. (The laundry should be taken out towards the end of the
anti-crease phase at the latest to prevent creases from forming.) If LONG ANTICREASE ANTIKREUK LANG function has been selected, the anti-crease phase is
lengthened by 60 minutes.
1. Open door.
2. Before removing the laundry, remove fluff from the micro-fine filter. It is best
to use a damp hand for this purpose. (See “Care and cleaning” chapter.)
Daily use
18
3. Remove laundry.
4.
Turn the programme selector to OFF UIT.
After each drying cycle:
- Clean the micro-fine filter and fine filter
- Drain the condensed water container
(See chapter “Care and cleaning”.)
5. Close the door.
Care and cleaning
Care and cleaning
Cleaning fluff filter
The filters collect all the fluff which accumulates during drying. To ensure that the
dryer works perfectly, the fluff filters (micro-fine filter and fine strainer) must be
cleaned after every drying cycle.
The warning led FILTER ZEEF is on to remind you this operation.
CAUTION!
Never operate the dryer without fluff filters or with damaged or blocked fluff filters.
1.Open loading door
2.Use a damp hand to clean the mi-
cro- fine filter, which is built into
the lower part of the loading aperture.
19
3.After a period of time, a patina due
to detergent residue on laundry
forms on the filters. When this occurs, clean the filters with warm
water using a brush. Remove the
filter from the door pulling it out. It
can be positioned with the tooth
facing to the left or to the right).
After cleaning do not forget to put
it back.
Care and cleaning
20
4.Push down unlock button on large
mesh filter.
Large mesh filter jumps up.
5.Take out fine strainer.
6.Remove fluff from fine strainer. It
is best to use a damp hand for this
purpose.
Clean the entire filter area
The strainer area does not have to
be cleaned after every drying cycle,
but should be checked regularly
and cleaned of fluff if necessary.
7.To do this, grip the top of the large mesh filter and pull it forwards until it
comes loose from the two brackets.
8.Remove fluff from the entire filter
area. It is best to use a vacuum
cleaner for this purpose.
9.Press both journals of the large
mesh filter into the brackets on the
loading door until they snap into
place.
10. Re-insert fine strainer.
11. Press against the large mesh filter
until it locks into the interlock.
Care and cleaning
If the fine strainer is not fitted, the large mesh
filter will not snap into place and the loading
door cannot be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cycle has
finished.
Emptying the condensate tank
Empty condensate tank after every drying cycle.
If the condensate tank is full, an active programme will break off automatically
and the warning led TANK light up. In order to continue the programme, the condensate tank must first be emptied.
21
WARNING!
The condensate is not suitable for drinking or for preparing foodstuffs.
1. Take out drawer containing condensed water container completely
1 and pull up the condensed water
container’s drainage pipe as far as it
will go 2.
2
1
Care and cleaning
22
2. Pour condensed water out into a basin or similar receptacle.
3. Slide outlet connections in and refit
condensate tank.
If the programme has been interrupted as a result of the condensate tank
being full: Press the START PAUSE
START PAUZE button to continue the
drying cycle.
The condensate tank has a volume of approx. 4 litres. This is sufficient for around
7kg of laundry which has previously been spun at 1000 revolutions/ minute.
The condensate can be used as distilled water, e.g. for steam ironing. However first
filter the condensate (e.g. with a coffee filter) to remove any residue and small
pieces of fluff.
Cleaning heat exchanger
If the warning led HEAT EXCHANGER WARMTEWISSELAAR is lighting, the heat
exchanger needs to be cleaned.
CAUTION!
Operating when the heat exchanger is blocked with fluff can damage the dryer.
This also increases energy consumption.
1. Open door.
2. Open door in plinth. To do this, press
the release button on the bottom of
the door aperture and open the door
in the plinth to the left.
3. Clean fluff from the inside of the
door and the heat exchanger front
chamber. Wipe the door seal with a
damp cloth.
Care and cleaning
4. Turn both lock washers inwards.
5. Use the handle to pull the heat
exchanger out of the base and carry
it horizontally to prevent any remaining water from spilling.
6. To empty the heat exchanger, hold
vertically over a washing-up bowl.
CAUTION!
Do not use sharp objects to clean. The
heat exchanger could develop leaks.
7. Clean heat exchanger.
It is best to use a brush or to rinse thoroughly with a hand-held shower.
8. Replace heat exchanger and lock into place (turn both lock washers outwards
until they snap into place).
9. Close door in plinth.
23
CAUTION!
Never operate the dryer without the heat exchanger.
Cleaning the drum
CAUTION!
Do not use abrasives or steel wool to clean the drum.
Lime in the water or cleaning agents may form a barely visible lining on the inside
of the drum. The degree to which the laundry has been dried is then no longer
detected reliably. The laundry is damper than expected when removed from the
dryer.
Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the
inside of the drum and drum ribs.
Care and cleaning
24
Clean operating screen and housing
CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...
Troubleshooting by yourself
What to do if ...
25
If, during operation, the error code
E...
plus number or letter) appears on the LCD:
Switch the machine off and on again. Reset programme. Press the START PAUSE
START PAUZE button If the error is still displayed, please inform your local Service
Force Centre and quote the error code.
ProblemPossible causeRemedy
Dryer does not work.
Drying results
unsatisfactory.
Loading door does not
close.
When a button is
pressed,
Err
appears on
the LCD.
Mains plug is not plugged in or fuse
is not working correctly.
Loading door is open.Close loading door.
Have you pressed the START PAUSE
START PAUZE button?
Wrong programme selected.
Lint filters clogged.Clean lint filters.
Fluff filter clogged.Clean fluff filter.
Heat exchanger clogged with lint.Clean heat exchanger.
Overloading of laundry.
Ventilation slots in base area covered up.
Residue on inside surface of drum
or drum ribs.
Conductance of water at installation site differs from standard setting of machine.
Fine strainer not in place and/or
mesh filter not locked in place.
Washing protection. After the start
of the programme, the option can
no longer be set.
Plug in at mains socket. Check fuse
in fuse box (domestic installation).
Press the START PAUSE STARTPAUZE button again.
Select a different programme the
next time you dry (see “Programme
chart” chapter).
Observe recommended loading volumes.
Uncover ventilation slots in base
area.
Clean inside surface of drum and
drum ribs.
Re-programme standard setting
for degree of drying (see ‘Machine
settings’ chapter).
Install fine strainer and/or snap
large mesh filter into place.
Turn the programme knob to OFF
UIT. Set the programme again.
What to do if ...
26
Displayed programme
time changes
erratically or stays unchanged for a long
time.
Programme inactive,
empty water tank
warning led is lighting.
Drying cycle ends
shortly after programme starts.
Drying cycle lasts an
unusually long time.
Note: After around 5
hours the drying cycle
ends automatically
(see „Drying cycle complete ”).
Programme time is corrected
automatically depending on type
and volume of laundry and level of
dampness.
Condensate tank is full.
Not enough washing loaded or
washing loaded is too dry for selected programme.
Lint filter clogged.Clean lint filter.
Fluff filter clogged.Clean fluff filter.
Load volume too big.Reduce load volume.
Laundry insufficiently spun.Laundry must be adequately spun.
Particularly high room temperature. Temporary switching off of
the compressor to avoid overload.
Automatic process; this is not a machine fault.
Empty condensate tank, then start
programme with START PAUSE
START PAUZE button.
Select time programme or higher
drying level (e.g. STRONG DRY IN-TENSIEF DROOG instead of CUPBOARD DRY KASTDROOG).
Automatic process, there is no fault
with the appliance. If possible,
lower the room temperature.
Machine settings
SettingImplementation
BUZZER
off
Water hardness
Water contains, a variable
quantity of limestone and
mineral salts of which quantities vary according to
geographical locations thus
varying its conductivity values.
Relevant variations of the
conductivity of the water compared to those prefixed by the
factory could slightly influence
the residual humidity of the
laundry at the end of the cycle.
Your dryer allows you to regulate the sensitivity of the drying
sensor based on conductivity
values of the water.
Emptying water tank - warning message permanent off
When using an external drain
for the condensed water.
ZOEMER
permanent
Machine settings
1. Turn the programme selector to any programme.
2.
Press simultaneously the DELICATE DELICAAT and LONG
ANTI-CREASE ANTIKREUK LANG buttons and hold down for
approx. 5 seconds the result can be following:
lighting diode comes off - BUZZER ZOEMER permanently
off.
3. The buzzer is by default always off. You can use BUZZER
ZOEMER button to activate or deactivate sound but machine
does not memorize your selection.
1. Turn the programme selector to any programme.
2.
Press simultaneously the DELICATE DELICAAT and BUZZER
ZOEMER buttons and hold down for approx. 5 seconds. The
current setting is on the display:
–
–
–
3.
Press the START PAUSE START PAUZE button sequentially
until you set desired level.
4. To memorize setting press simultaneously the DELICATE
DELICAAT and BUZZER ZOEMER buttons or turn knob to OFF
UIT position
1. Turn the programme selector to any programme.
2.
Press simultaneously the LONG ANTI-CREASE ANTIKREUKLANG and START PAUSE START PAUZE buttons and hold down
for approx. 5 seconds.
The current setting is on the display:
–
–
By default the warning led is activated and is lighting always at
the end of the drying cycle or during the cycle if the water
container is full.
low conductivity <300 micro S/cm
medium conductivity 300-600 micro S/cm
high conductivity >600 micro S/cm
- led warning is permanently off
- led warning is activated
27
Technical data
28
Technical data
This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive
92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Height x width x depth85 x 60 x 58 cm
Depth with loading door open109 cm
Height can be adjusted by1.5 cm
Weight when emptyapprox. 40 kg
1)
Loading volume (depends on programme)
Energy consumption in accordance with IEC
61121 s. e. (7kg of cotton, pre-drained at 1000
1) Different loading volume data may be needed in some countries as a result of different measuring methods.
max. 7kg
4,4 kWh
Consumption values
The consumption values have been established under standard conditions. They
may deviate when the machine is operated in domestic circumstances.
ProgrammeLoading volume in kg
COTTON CUPBOARD DRY KATOEN KAST-
1)
DROOG
COTTON IRON DRY KATOEN STRIJK-
1)
DROOG
SYNTHETICS CUPBOARD DRY SYNTHETISCH KASTDROOG
1) pre-drained at 1000 rpm
2) pre-drained at 1200 rpm
2)
74.4
73.41
31.36
Energy consumption in
kWh
Hints for test institutes
Hints for test institutes
Parameters possible to checked by the Test Institutes:
• Energy consumption (corrected with final humidity) during the cupboard dry
cotton cycle with nominal load.
• Energy consumption (corrected with final humidity) during the cupboard dry
cotton cycle with half load.
• Final humidity (during Cupboard dry cotton, Iron dry cotton and Cupboard dry
Easy care)
• Condensation efficiency (corrected with final humidity) during cupboard dry
cotton cycle with nominal and half load
All the cycles have to be checked in accordance with IEC 61121 (Tumble dryers for
household use – Methods for measuring the performance).
Installation
Appliance positioning
29
• It is recommended that, for your convenience, the machine is positioned close
to your washing machine.
• The tumble dryer must be installed in a clean place, where dirt does not build
up.
• Air must be able to circulate freely all round the appliance. Do not obstruct the
front ventilation grille or the air intake grilles at the back of the machine.
• To keep vibration and noise to a minimum when the dryer is in use, it should be
placed on a firm, level surface.
• Once in its permanent operating position, check that the dryer is absolutely level
with the aid of a spirit level. If it is not, raise or lower the feet until it is.
• The feet must never be removed. Do not restrict the floor clearance through
deeppile carpets, strips of wood or similar. This might cause heat built-up which
would interfere with the operation of the appliance.
The hot air emitted by the tumble dryer can reach temperatures of up to 60°C. The
appliance must therefore not be installed on floors which are not resistant to high
temperatures.
When operating the tumble dryer, the room temperature must not be lower than
+5°C and higher than +35°C, as it may affect the performance of the appliance.
Installation
30
WARNING!
Should the appliance be moved, it must be transported vertically.
WARNING!
The appliance must not be installed behind the lockable door, a sliding door a door
with a hinge on the opposite side to that of the appliance.
Removing transport safety packaging
CAUTION!
Before use all parts of the transport packaging must be removed.
1. Open loading door
2. Pull off adhesive strips from inside ma-
chine on top of drum.
3. Remove foil hose and polystyrene
padding from the machine.
Electrical connection
Details on mains voltage, type of current and the fuses required should be taken
from the type plate. The type plate is fitted near the loading aperture (see “Product
description” chapter).
WARNING!
The manufacturer declines any responsibility for damage or injury through
failure to comply with the above safety precautions.
Should the appliance power supply cable need to be replaced, this must be
carried out by our Service Center.
Installation
The power supply cable must be accessible after installing the machine.
Connect the machine to an earthed socket, in accordance with current wiring
regulations.
Changing door stop
WARNING!
The door stop may only be changed by a specialist. If necessary, please contact our
after-sales service or your specialist dealer.
WARNING!
Before changing the door stop, disconnect the mains plug.
1.Open loading door.
2.
Unscrew hinge A from the front of the
machine and take off the loading door.
3.
Remove cover plates B and C. To do this,
insert a thin screwdriver into the slots as
shown in the illustration, press downwards slightly and pry out the cover
plates.
4.Use an appropriate tool and exert pres-
sure to unfasten locking block D from
the snap-on fixture, take out and re-insert on the other side having rotated the
block through 180°.
5.
Unscrew hinge A from the loading door,
rotate through 180°, re-insert on the
opposite side and screw down.
6.
Re-insert cover plates B and C on the opposite site having first rotated them
through 180°.
AC
B
A
31
D
C
Installation
32
7.
Unscrew cover plates E from the
front of the machine, rotate
through 180°, screw on the opposite side.
8.
Unscrew door lock F, push down
slightly and remove from the front
of the machine.
9.Disconnect cable connector from
door lock F.
10.
Press snap-in button G in and
down, press cover down slightly
and remove from front of the machine.
11. Disconnect cable connector from
cover G.
12.
Change door lock F over to the opposite side, insert the cable connector and
screw down the door interlock.
13. On the other side, insert the cable connector in cover G, insert cover and allow
snap-in button to lock into place.
14. Insert loading door and hinges into recesses on the front of the machine and
screw down.
Note regarding contact protection:The machine is only secure for operations
again once all plastic parts have been inserted.
E
F
E
F
G
G
Special accessories
Intermediate installation kit for stacked washer and dryer:
Available from your Service Force Centre or your specialist dealer
These intermediate installation kits can be used to arrange the dryer and an
automatic AEG-Electrolux washing machine (60cm wide, front loading) as a spacesaving washer/dryer stack. The automatic washing machine is at the bottom and
the dryer is at the top.
Version to be supplied:
– with extractable stacker plate 916.018 903
Read carefully the instructions supplied with the kit.
Environment
Installation kit for external condensate drain
Attached to your product
Installation kit 125 122 510 for direct draining of condensate into a basin, siphon,
gully, etc. The condensate tank then no longer has to be drained, it must however
remain in its intended position in the machine. Refer to the “Programme options”
section for how to deactivate the EMPTY WATER TANK (TANK) alert.
Max. displacement height: 1m from the base of the dryer; max. displacement
length: 3m
Read carefully the instructions supplied with the kit.
Environment
Packaging material
The packaging materials are environmentally friendly and can be recycled. The
plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose
of the packaging materials in the appropriate container at the community waste
disposal facilities.
33
Old appliance
The symbol on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it should be taken to the appropriate
collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your
household waste disposal service or the shop where you purchased the product.
WARNING!
Remove mains plug from socket when you have no further use for the machine.
Cut off mains cable and dispose of together with plug. Destroy loading door hook.
Children cannot then lock themselves in the machine and put their lives at risk.
Environment
34
Environmental tips
• In the dryer, laundry becomes fluffy and soft. Fabric softeners are not therefore
needed when washing.
• Your dryer will function most economically if you:
– always keep the ventilation slots on the base of the dryer unobstructed;
– use the loading volumes specified in the programme overview;
– ensure you have good ventilation in the installation room;
– clean the micro-fine filter and fine strainer after each drying cycle;
– spin the laundry well before drying. Example: Consumption data – depending
on spinning speed – for 7kg of laundry, dried using the COTTONS CUPBOARD
DRY KATOEN KASTDROOG programme.
Pre-drainingDrying cycle
Revolutions per
minute
10004.20604.400,66
12003.92564.200,63
14003.64523.870,58
18003.15453.400,51
1) Tariff: 0.15 Euro/kWh
Residual dampness
in litresas a %
Energy in kWh
Costs in euros
1)
Service
In the event of technical faults, please first check whether you can remedy the
problem yourself with the help of the operating instructions (Chapter “What to do
if…”).
If you were not able to remedy the problem yourself, please contact the Customer
Care Department or one of our service partners.
In order to be able to assist you quickly, we
require the following information:
– Model description
– Product number (PNC)
– Serial number (S No.) (for numbers, see rat-
ing plate)
– Type of fault
– Any error messages displayed by the appliance
So that you have the necessary reference numbers from your appliance at hand,
we recommend that you write them in here:
35
Model description: ................................................................................