AEG-Electrolux SC290 User Manual

Page 1
kühlgeräte/ réfrigérateur / frigorifero/ refrigerator
GEBRAUCHSANWEISUNG
NOTICE D’UTILISATION
ISTRUZIONI D’USO
INSTRUCTIONE BOOKLET
818 36 62--00/9
SC290
DE
FR
IT
Page 2
Safety instructions
Your new fridge may have other functions compared to your previous one. Carefully read these instructions to learn how the appliance works and how to care for it. Keep the booklet. It will come in handy if you later sell the cabinet or give it to somebody else. These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or warnings contact the Customer Care Department.
For the User
· The cabinet is intended for keeping foodstuff in a
normal household as explained in this i nstruction booklet.
break.
· The cabinet is heavy. The edges and projecting
parts of the cabinet may be sharp. Be careful when moving the cabinet and always use gloves.
GB
instruction
· Do not keep explosive gases or liquids in the
refrigerator or freezer compartment. They may explode and cause injury and material damage.
· Do not let sharp objects come into contact with
the refrigerating system on the back of and inside the cabinet. If the refrigerating system is punctured, the cabinet will be damaged and foodstuff inside may spoil.
· Do not keep carbonised drinks or bottles in the
freezer compartment. The glass bottles may
Child Safety
· Pay attention so that small children do not gain
access to the operating controls or the inside of the cabinet.
Scrapping old cabinets
When discarding the cabinet, hand it over to a recycling station. For more information, call your local city office or your dealer.
Contents
Safety instructions 35.................
Scrapping old cabinets 35.......................
Contents 35..........................
Description of the Appliance 36........
Control Panel 36..............................
Before use 36.........................
Using the fridge 37....................
To start the fridge and set the correct temperature 37.
Temperature inside the fridge 37.................
Measuring the temperature 37...................
Switching off 37..............................
Alarms and other features 38....................
Cabinet interior 38............................
Hints and Tips 40.....................
Saving energy 40.............................
Food Storage 40..............................
Protect the environment 40......................
GB
Maintenance and Cleaning 40..........
Removing the ventilation grille 40................
Cleaning 40..................................
Defrosting the fridge 41........................
To change the light bulb 41.....................
Change of carbon filter 41......................
When the appliance is not in use 41...............
Something Not Working 42............
Technical specification 43.............
Installation 43........................
Mains Cable 43...............................
Unpacking 43................................
Remove the transport supports 43................
Before installing the cabinet 43..................
Installation of carbon filter 44...................
Cleaning 44..................................
Installing the cabinet 44........................
Door Reversal 45.............................
Electrical connection 45........................
35
Electrolux 818 36 62-00/9
Page 3
Description of the
A
4
3
5
1
2
11
1
1
5
1
1
5
6
Control Panel
7
8
9
10
12
10
13
5
ppliance
Model SC290
1. glass shelf
2. quick chill shelf
3. bottle- and can holder
4. grid
5. vegetable drawer
6. ventilation grille
7. butter compartment
8. door shelf +box
9. sliding shelf
10. door shelf
11. bottle shelf
12. egg holder
13. bottle shelf
ACTION
COOL
GB
A BCDEFG
A. Refrigerator power switch
Switches the refrigerator on and off.
B. Temperature display
Shows the average temperature inside the refrigerator.
C. Temperature adjustment button/thermostat
Used to set the temperature in the refrigerator.
D. ACTION COOL button
Used to switch the Action Cool feature on and off.
Before use
Position and clean the cabinet as explained in the section "Installation". Check that the drain hose at the rear of the cabinet discharges into the drip tray.
Before inserting the power plug into the outlet and switching on the cabinet for the first time, leave i t standing upright for about 30 minutes, or for 4 hours if it was transported horizontally. Otherwise the compressor may sustain damage. This time will allow the oil sufficient time to return to the compressor.
E. Yellow indicator lamp
Lights when Action Cool is operating.
F. Alarm shut-off button
Used to turn the audible alarm off.
G. Red warning lamp
Flashes when one of the alarms in the cabinet has been triggered.
GB
Electrolux 818 36 62-00/9
36
Page 4
Using the fridge
To start the fridge and set the correct temperature
Switching on:
Switch on the fridge by pressing the power switch.
Setting the temperature
Press the buttons until the desired temperature flashes in the temperature display (The temperature can be set between +2°C and +8°C.) "+" raises the temperature. "-" lowers the temperature. Once set, the temperature display shows " -" until the temperature inside the fridge reaches +9°C or below. Allow the cabinet to run for a period of 24 hours whenever the t emperature setting is changed. This will allow the temperature to stabilise inside the cabinet. It is not necessary to reset the temperature when the cabinet is switched on after it has been out of use. The thermostat recalls the previously set temperature.
GB
ACTION
5
5
COOL
ACTION
COOL
Temperature inside the fridge
A suitable temperature inside the fridge is approx. +5°C. Storage temperature in the cabinet is even on all of the shelf levels. The vegetable box which is placed in the bottom has a temperature of 3-4°C warmer than the intended temperature setting.
Measuring the temperature
If the temperature is measured using a standard, single thermometer, this should be put in a glass of water centrally placed inside the cabinet. This will reflect the temperature inside the food products. Do not place the thermometer hanging or lying directly on the shelf.
Hints:
· Distribute foodstuffs to allow cold air to circulate freely between the products.
· Also never put warm products into the cabinet. Wait until they have cooled down.
· Cover all foods properly.
Switching off
Switch off the cabinet by pressing the power switch. Keep the button pressed for approx. 1 second.
Power to the cabinet is completely interrupted only when the power plug is disconnected.
ACTION
5
COOL
37
Electrolux 818 36 62-00/9
Page 5
Alarms and other features
Door open alarm
If the fridge door remains open for more than 5 minutes, the red warning lamp starts flashing and an audible alarm sounds. To switch off the alarm: Press the "alarm shut-off button". The red warning lamp goes out when the door is closed.
Quick chill
This function has two usage areas. One area in connection with cans / bottles being quickly chilled on the quick chill shelf, and the other in connection with large amounts of food at room temperature being placed on the shelf.
Chilling of cans/bottles:
When groceries are placed on the shelf (see under section; Quick chill shelf) the air regulator should be turned to it's maximum position, then press the Quick chill button. This will be indicated in the symbol window with a "C" and by the yellow lamp being lit.
Chilling of warm groceries:
This function is used in connection with large amounts of groceries at room temperature being placed in the fridge. Pressing the Quick chill button starts this function. This will be indicated in the symbol window with a "C" and by the yellow lamp being lit. When this function has been activated forced air will chill the groceries, and the temperature in the cabinet reset to +2°C. After 6 hours the Quick chill automatically shuts off and the temperature gradually goes back to its normal setting.
MAX
C
ACTION
5
COOL
MIN
ACTION
COOL
Carbon filter's function:
The built-in carbon filter means that strong smelling groceries can be placed near other groceries without affecting their taste or aroma.
Cabinet interior
The shelves and door compartments are removable and can easily be re-arranged. Certain shelves must be lifted up by the rear edge to enable them to be removed. The lower door compartment and the glass shelf above the vegetable drawer must not be moved. They are required for proper air circulation inside the cabinet. Shelves with a raised edge should be placed with the raised edge facing the rear wall of the cabinet.
38
Electrolux 818 36 62-00/9
Page 6
Hanging half-shelf
The half-shelf can be moved sideways. It can be hung under all door shelves, except the lowest one.
The vegetable box has a ventilation edging to increase the circulation of air and reduce the risk of condensation.
The vegetable box has two moveable partitions with five different choices in order to separate different vegetables.
Bottle- and can holder
The side of the bottle and can holder is moveable to enable a more flexible placement of cans and bottles in front of the grid. To allow the holder to be moved easier, when moving sideways, press the shelf backwards. During chilling of cans or bottles the article should be centrally placed in front of the grid to obtain the best chilling effect. The bottle support can be pulled out when chilling larger bottles. For a description of this functions start and stop, see under heading Quick Chill.
Quick chill shelf:
The lower Quick chill shelf can be placed in one of the upper grooves. To maintain the best performance the shelf should be placed in the second groove from the top.
Dismantling of the bottle-- and can holder.
Take out the Quick Chill shelf with holder from the cabinet. To loosen the holder from the shelf, bend the hooks/brackets that surround the backside of the shelf.
Electrolux 818 36 62-00/9
39
Page 7
Hints and Tips
GB
Saving energy
· Pay careful attention to where the cabinet is
placed. See the section "Installation". When installed correctly, the cabinet will consume less energy.
· Try to avoid keeping the door open for long
periods, or opening the door too frequently as warm air will enter the cabinet, and cause the compressor to switch on unnecessarily often.
· Ensure there are no obstructions preventing t he
door from closing properly.
· Thaw frozen food in the fridge. This will ensure
safer defrosting of foods and reduce the work of the refrigeration unit
· It is advisable to periodically clean the
refrigeration system at the back of the appliance with a duster or vacuum cleaner.
· Always leave warm food to cool down to room
temperature before placing in the fridge.
· Make sure the door gasket is complete and
always clean.
Food Storage
· To obtain the best results from your appliance,
neither hot foods nor liquids which may evaporate, should be placed in the larder
compartment.
· Avoid buying frozen food if you can not store i t
straight away. The use of an insulated container is advisable. When you arrive home place the frozen food in the freezer immediately.
· Ensure that food placed in the freezer is dated and
labelled and used in date order to ensure that food is consumed at its best. Remove suspect food from you refrigerator and clean, refer to cleaning and maintenance.
Protect the environment
· Hand over the cabinet packaging and discarded
fridges and freezers to a recycling station. Contact your local council or Environmental Health office for more information.
· Keep foodstuff in re-usable containers. Cut down
on disposable material as much as possible.
· When cleaning the cabinet, use a mild
washing-up detergent.
· Follow the advice in the section "Saving energy"
· The door gasket and coolant used in this
cabinet will not harm the ozone layer.
· All parts in the packaging can be recycled.
· The cabinet has been designed for easy
dismantling and subsequent recycling.
Maintenance and Cleaning
Removing the ventilation grille
The ventilation grille can be removed, e.g. to wash the grille. Make sure the door is open when removing the ventilation grille. Unsnap the upper edge of the grille by pulling outward/downward. Then pull the grille straight out to completely remove it.
Cleaning
Clean the cabinet at regular intervals.
Don't use detergents, abrasive powders, high perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol when cleaning the product
Disconnect the appliance from electricity supply.
Clean the inside and accossories with warm water and bicarbonate of soda (5ml to 0,5 litre water). Be careful when cleaning the inside of the cabinet, due to fragile edges. Rinse and dry thoroughly. Regularly check the door seals and wipe clean to ensure they are clean and free from debris.
GB
40
Electrolux 818 36 62-00/9
Page 8
Wash the outer cabinet with warm soapy water. Remove the ventilation grille (see the section "Removing the ventilation grille") and vacuum-clean under the cabinet. Once or twice a year dust the condenser (black grille) and the compressor at the back of the appliance, with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption.
When moving the cabinet, lift it by the front edge to avoid scratching the floor.
Defrosting the fridge
The fridge is defrosted automatically every time the compressor stops. Frost formation can be prevented by:
· not putting warm foodstuff inside the cabinet.
· avoiding frequently opening the door or keeping
it open too long.
To change the light bulb
The light is switched on automatically when the door is opened. Before replacing the light bulb, disconnect the power plug from the outlet. Cut the packaging around the bulb socket. Keep the packaging on to hold the bulb when setting it into the socket. Do not touch the bulb with your bare fingers. Halogen light bulbs are sensitive to grease from the skin. Use a clear halogen light bulb.
G4
UV-blocked
Low pressure20W/12V
Change of carbon filter
To maintain the best performance the carbon filter should be changed once a year with normal usage. New carbon filters can be purchased from your local dealer. The filter is placed behind the grill and can be reached by opening the cover. The cover can be opened by simultaneously pressing the lever on the right of grill (1) and turning the cover outward (2). The carbon filter is then pulled out of its slot (3). The new carbon filter is placed in the existing slot ­The filter should be handled carefully so fragments don't loosen from the surface.
When the appliance is not in use
Disconnect the appliance from electricity supply.
Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells. If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.
1
2
3
41
Electrolux 818 36 62-00/9
Page 9
Something Not Working
Before contacting your local Service Force Centre check the following point:
Problem Possible cause / Remedy
GB
"" is displayed in the temperature display.
It is too warm inside the refrigerator. Set a lower temperature.
It is too cold inside the refrigerator. Set a warmer temperature.
Water comes out on the floor. P l ace the drain hose at the back of the cabinet above the drain
The compressor operates continuously. Set a warmer temperature.
The cabinet does not operate at all. Cooling or interior light does not operate. No indicator lamps light.
An error has occurred in measuring the temperature. Call your service representative. (The cooling system will continue to keep food products cold, but temperature adjustment will not be possible.)
Put food products in the right place inside the refrigerator. See the chapter "Temperature inside the refrigerator".
Distribute the food products to allow cold air to circulate around them.
Make sure that the door is completely closed and that the insulating strip is complete and clean.
bowl. See the chapter "Before using the cabinet the first time".
Make sure that the door is completely closed and that the insulating strip is complete and clean.
Power does not reach the cabinet. (Try connecting another electrical device to the power outlet.)
The cabinet is not switched on.
The fuse has blown.
The power plug is not properly connected.
Sound level in cabinet is too high. The refrigerating system will always produce some sounds. A
pulsing sound is heard when coolant is pumped inside the cooling pipes. A ticking sound from the thermostat can be heard when the compressor switches on and off. The sound level varies depending on the operation of the cabinet. If you feel the sound level i s incorrect:
Make sure the pipes at the back of the cabinet not touch each other. Carefully bend them if they do.
If the cushion spacers (between the cabinet wall and pipes) come loose, put them back in place again.
Carefully follow the instructions in the chapter "Installing the cabinet".
If after above checksthere is still a fault call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for in-guarantee service calls.
42
Electrolux 818 36 62-00/9
Page 10
Technical specification
Model SC290 Volume Refrigerator 290 l Width 595 mm Height 1600 mm Depth 623 mm Energy consumption 136 kWh/y Energy class A+ Rated power 85 W
GB
Installation
GB
Electrical cord
Do not remove the power cord by pulling on its lead, particulary when the product is being pulled out of its niche.
· Damage to the cord may cause a short-circuit, fire and/or electric shock.
· In the event of damage to the appliance's main cable, only an authorised service company recommended by
the manufacturer or a similarly qualified person may adjust it in order to avoid shock hazard for the user.
Unpacking
Unpack the cabinet and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Hand the packaging over for recycling. For more information, contact your local city office or the dealer.
Do not allow children t o play with the packaging. The plastic film can cause suffocation.
Remove the transport supports
Remove the tape and the t ransport supports from
· the door sides
· inside the door hinges
· the shelves
Remove the transport support on the glass shelf by pushing the support forward along the edge of the shelf until it stops. Take hold of the rear edge of the glass shelf and pull the shelf and transport support forward until the shelf tilts and the transport support can be removed. Some models are fitted with a silencing pad under the cabinet. Do not remove this pad.
Before inst alling the cabinet
Affix the supplied plastic peaces at the rear of the cabinet.
Electrolux 818 36 62-00/9
43
Page 11
Installation of carbon filter
)b)
On delivery the carbon filter is placed in a plastic bag to secure the length of life of t he carbon filter. The filter should be placed behind the grill before the cabinet is turned on. The cover can be opened by simultaneously pressing the lever on the right of grill (1) and turning the cover outward (2). The carbon filter is t hen mounted in the slot found in the back of the cover. The filter should be handled carefully so fragments don't loosen from the surface.
Cleaning
Wash the inside of the cabinet using l ukewarm water, a mild washing-up detergent and a soft cloth.
Installing the cabinet
When two appliances are placed beside each other, the distances enclosed in the plastic wrapping should be glued between the appliances. As shown in the illustration.
1
2
3
To obtain the best performance from the cabinet, ensure :
· the cabinet is placed in a dry, cool place and
is not exposed to direct sunlight.
· the cabinet is not placed close to a source of
heat, e.g. a cooker or dishwasher.
· the cabinet is level. The cabinet should not lean
against any wall. If necessary adjust the feet using the adjustment spanner supplied.
· there is good air circulation around the cabinet
and that the air channels below and behind the cabinet are not blocked. The ventilation space above the cabinet must be at least 4 cm. The ventilation space can either be
a) directly above the cabinet, or b) behind and above the top cupboard. In this case,
the space behind the cupboard must be at least 50 mm deep.
Cabinet is placed at a location whose ambient temperature corresponds to the climate classification*, for which the appliance is designed. * See on the rating plate on the inside of the appliance. The following table shows which ambient temperature is correct for each climate classification.
Climate classification
SN
N
ST
T
for an ambient temperature of
+10°C to +32°C
+16°C to +32°C
+18°C to +38°C
+18°C to +43°C
a
50mm
If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 230 mm to allow the door to open enough so that the shelves can be removed. Check that the drain hose at the rear of the cabinet discharges into the drip tray.
Electrolux 818 36 62-00/9
44
Page 12
Door Reversal
1. Close the cabinet and remove the plug from the
electrical socket.
2. Remove the ventilation grille. There is a part on
the grille that can be removed. Remove and reposition it on the other side.
3. Put the cabinet on a wooden board when it is laid
down. Later, when raising the cabinet, it will be easier to grip under t he cabinet thanks to the board.
4. On the upper part of the cabinet. Put the hinge pin
on the other side.
1
2
3
4
5. On the lower part of the cabinet.
a. Unscrew the hinge. b. Remove the door-closing fittings from the hinge and put the hinge pin on the other s ide. Then attach the supplied door-closing fitting.
6. a. Remove the door-closing fitting from the
bottom of t he door. b. Remove the plastic plug from the corresponding hole on the other side. Use a screwdriver to rock the plug loose. Then secure the supplied door-closing fitting. c. Secure the lower hinge. Remove any play in the door by adjusting the height of the lower hinge with the supplied spanner. Secure with the lock-nut.
7. Raise the cabinet and replace the ventilation grille.
8. To transfer the handle.
Unscrew the screws. Fit the handle onto the opposite side by turning it one half circle. Press the supplied plastic plugs into the holes to which the handle was previously fitted.
8
5a
5b
a
6
b
c
9. Put the cabinet in position. Check that the
appliance is level. See the section "Positioning the cabinet".
Electrical connection
Connect the cabinet to a grounded electrical outlet. Voltage: 230 V. Fuse: 10 A. Refer to the rating plate on the left inside the cabinet.
Electrolux 818 36 62-00/9
45
Page 13
aбЙ=bдЙЕнкздмсJdкмййЙ=блн=ЗЙк=пЙднпЙбн=Цк∏≈нЙ=eЙклнЙддЙк=озе=Ц~лJ=меЗ=л нкз гÄЙнкбЙÄÉåÉå=dÉê®íÉå=Ñê=ÇáÉ=hЕЬЙI=тмг oЙбебЦЙе=меЗ=Ск=cзклн=меЗ=d~кнЙеK=gЙЗЙл=g~Ьк=оЙкв~мСн=ЗбЙ=bдЙЕнкздмсJdкмййЙ=бе=ΩÄЙк=NRM=i®еЗЙке=ЗЙк=bкЗЙ=ΩÄЙк=RR jбддбзеЙе=mкзЗмвнЙ=EhЬдлЕЬк®евЙI=eЙкЗЙI=t~лЕЬг~лЕЬбеЙеI=pн~мÄл~мЦЙкI=jзнзкл®ЦЙе=меЗ=o~лЙег®ЬЙкF=гбн=ЙбеЙг tЙкн=озе=кмеЗ=NQ=jкЗK=rpaK
iЙ=dкзмйЙ=bдЙЕнкздмс=Йлн=дЙ=йкЙгбЙк=С~ДкбЕ~ен=гзеЗб~д=ЗD~йй~кЙбдл=ЗзгЙлнбимЙлI=ЗDЙенкЙнбЙе=Йн=йзмк=дDЙсн¨кбЙмкK mдмл=ЗЙ=RR=гбддбзел=ЗЙ=йкзЗмбнл=Зм=dкзмйЙ=bдЙЕнкздмс=EнЙдл=имЙ=к¨СкбЦ¨к~нЙмклI=ЕмблбебкЙлI=д~оЙJдбеЦЙI=~лйбк~нЙмклI нкзе´зееЙмлЙлI=нзеЗЙмлЙл=¶=Ц~тзеF=лзен=оЙеЗмл=ЕЬ~имЙ=~ее¨Й=йзмк=ме=гзен~ен=ЗDЙеобкзе=NQ=гбддб~кЗл=ЗDbмкзл З~ел=йдмл=ЗЙ=NRM=й~ул=¶=нк~оЙкл=дЙ=гзеЗЙK
fд=dкмййз=bдЙЕнкздмс==ЙD=бд=йбмD=Цк~еЗЙ=йкзЗмннзкЙ=гзеЗб~дЙ=Зб=~йй~кЙЕЕЬб~нмкЙ=йЙк=д~=ЕмЕбе~I=йЙк=д~=ймдбтб~=Й=Зб ~ннкЙтт~нмкЙ==йЙк=бд=Цб~кЗбе~ЦЦбз=Й=йЙк=млз=СзкЙлн~дЙK=lднкЙ=RR=гбдбзеб=Зб=йкзЗзннб=ЗЙд=dкмййз=bдЙЕнкздмс==E=им~дб=СкбЦзкбСЙкбI ЕмЕбеЙI=д~о~Дб~еЕЬЙкб~I=д~о~лнзобЦдбЙI=~лйбк~йздоЙкЙI=гзнзлЙЦЬЙ=Й=к~л~ЙкД~=F=оЙеЦзез=оЙеЗмнЙ=зЦеб=~еез=бе=йбмD=Зб=NRM m~Йлб=ЗЙд=гзеЗз=йЙк=ме=о~дзкЙ=Зб=Еб кЕ~=NQ=гбдб~кЗб=Зб=Зздд~кбK
qЬЙ=bдЙЕнкздмс=dкзмй=бл=нЬЙ=пзкдЗDл=д~кЦЙлн=йкзЗмЕЙк=зС=йзпЙкЙЗ=~ййдб~еЕЙл=Сзк=вбнЕЬЙеI=ЕдЙ~ебеЦ=~еЗ=змнЗззк=млЙK jзкЙ=нЬ~е=RR=гбддбзе=bдЙЕнкздмс=dкзмй=йкзЗмЕнл=EлмЕЬ=~л=кЙСкбЦЙк~нзклI=ЕззвЙклI=п~лЬбеЦ=г~ЕЬбеЙлI=о~Еммг=ЕдЙ~еЙклI ЕЬ~бе=л~пл=~еЗ=д~пе=гзпЙклF=~кЙ=лздЗ=Й~ЕЬ=уЙ~к=нз=~=о~дмЙ=зС=~ййкзсK=rpa=NQ=Дбддбзе=бе=гзкЙ=нЬ~е=NRM=ЕзменкбЙл ~кзмеЗ=нЬЙ=пзкдЗK
MARIESTAD /AV
Loading...