AEG-Electrolux S75438KG User Manual
User manual
Manual de instruções
Fridge-Freezer
Combinado
SANTO 75438 KG
2
Dear Customer
Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of
functional design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best
performance and control - indeed we are setting the highest standards of
excellence.
In addition to this you find environmental and energy saving aspects as an
integral part of our products.
To ensure optimal and regular performance of your appliance please read
this instruction manual carefully. It will enable you to navigate all processes
perfectly and most efficiently.
To refer to this manual any time you need to, we recommend you to keep
it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
The following symbols are used in this manual
Important information concerning your personal safety and information on
how to avoid damaging the appliance
General information and tips
Environmental information
3
Contents
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disposal of old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Remove transport safeguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Your appliance needs air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Rear spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Rehingeing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Prior to Initial Start–Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Temperature warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Function Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Interior Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Storage shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Variable Inner Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Bottle holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Moisture regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Air recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Fresh food refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Freezing and storing frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Preparation of Ice Cubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Freezing Calender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Installation of the charcoal filter . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Changing the charcoal filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Switching off the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
What to do if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Regulations, Standards, Guidelines . . . . . . . . . . . . . . . . . . . . . . . . .28
4
Safety
The safety aspects of our appliance comply with accepted technical
standards and the German Appliance Safety Law. Nevertheless, we consider
it our obligation to make you aware of the following safety information:
Intended use
• The appliance is intended for use in the home. It is suitable for the cooling,
freezing and storing of frozen food, as well as for making ice. If the
appliance is used for purposes other than those intended or used
incorrectly, no liability can be accepted by the manufacturer for any
damage that may be caused.
• Alterations or changes to the appliance are not permitted for reasons of
safety.
• If you use the appliance in a commercial application or forpurposes other
than the cooling, freezing or frozen storage of foods,please observe all
valid legal regulations for your application.
Prior to initial start–up
• Check the appliance for transport damage. Under no circumstance should
a damaged appliance be plugged in! In the event of damage, please contact
the vendor.
Refrigerant
The refrigerant isobutane (R600a) is contained within the refrigerant circuit
of the appliance, a natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
• During transportation and installation of the appliance, be certain that
none of the components of the refrigerant circuit become damaged.
• If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition;
– thoroughly ventilate the room in which the appliance is situated.
Safety of children
• Packaging (e.g. wraps, polystyrene) can be dangerous for children. There is
a risk of suffocation! Keep packaging material away from children!
• Please make old appliances unusable prior to disposal. Pull out the mains
plug, cut off the mains cable, break or remove spring or boltcatches, if
fitted. By doing this you ensure that children cannot lock themselves in
the appliance when playing (there is risk of suffocation!)or get themselves
into other dangerous situations.
• Often children cannot recognise the hazards present in household
appliances. It is therefore important that you ensure adequate supervision
and never let children play with the appliance!
5
Daily Operation
• Containers with flammable gases or liquids can leak at low temperatures.
There is a risk of an explosion! Do not store any containers with flammable
materials such as, for example, spray cans, fire extinguisher refill
cartridges etc in the refrigerator/freezer.
• Bottles and cans must not be placed in the freezer compartment. They can
burst when the contents freeze, high carbonate content drinks can even
explode! Never store lemonade, juices, beer, wine, sparkling wine etc. in
the freezer compartment. Exception: high alcohol content spirits can be
stored in the freezer compartment.
• Do not put ice creams or ice cubes in the mouth immediately after
removal from the freezer compartment. Very cold ice can freeze to the lips
or tongue and cause injury.
• Do not touch frozen food with wet hands. Your hands could freeze to the
food.
• Do not operate any electrical appliances in the refrigerator/freezer (e.g.
electric ice cream makers, mixers etc.).
• Before cleaning the appliance, always switch off the appliance and unplug
it, or pull the house fuse or switch off the circuit breaker.
• When unplugging always pull the plug from the mains socket, do not pull
on the cable.
In case of malfunction
• If the a malfunction occurs on the appliance, please look first in the "What
to do if ..." section of these instructions. If the information given there
does not help, please do not perform any further repairs yourself.
• Applianeces may only be repaired by qualified service engineers. Improper
repairs can give rise to significant hazards. If your appliance needs
repairing, please contact your specialist dealer or our Customer Service.
Disposal
Appliance Packaging Information
All materials are environmentally sound! They can be dumped or burned at
an incinerating plant without danger!
About the materials: The plastics can be recycled and are identified as
follows:
>PE< for polyethylene, e.g. the outer covering and the bags in the interior.
>PS< for polystyrene foam, e.g. the pads, which are all free of
chlorofluorocarbon.
The carton parts are made from recycled paper and should be disposed of
at a waste-paper recycling collection location.
6
Disposal of old Appliances
For environmental reasons, refrigeration appliances must be disposed of
properly. This applies to your old appliance, and - at the end of its service
life - for your new appliance as well.
Warning! Before disposing of old appliances make them inoperable. Remove
plug from mains, sever the power cable, remove or destroy any snap or latch
closures. This eliminates the danger that playing children lock themselves
into the appliance (danger of suffocation!) or place themselves into other
life-endangering situations.
Disposal:
• The appliance may not be disposed of with domestic waste or bulky refuse.
• The refrigerant circuit, especially the heat exchanger at the back of the
appliance, may not be damaged.
• The symbol on the product or on its packaging indicates that
this product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this
product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Remove transport safeguard
The appliance and the interior fittings are protected for transport.
• Remove all adhesive tape and packing pieces from the interior of the
appliance.
Installation
Installation Location
The appliance should be set up in a well ventilated, dry room.
Energy use is affected by the ambient temperature. The appliance should
therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature corresponds to
the climate classification, for which the appliance is designed.
The climate classification can be found on the serial plate, which is located
at the left on the inside of the appliance.
7
Climate classification for an ambient temperature of
SN +10 bis +32 °C
N +16 bis +32 °C
ST +18 bis +38 °C
T +18 bis +43 °C
The following table shows which ambient temperature is correct for each
climate classification: each climate classification:
If installation next to a source of heat is unavoidable, the following
minimum clearances must be maintained at the sides of the appliance:
– for electric cookers 3 cm;
– for oil and coal fired ranges 30 cm.
NP008
100 mm15 mm
15 mm
A
B
If these clearances cannot be
maintained a heat insulating pad is
required between the cooker and the
refrigeration appliance.
If the refrigeration appliance is
installed next to another refrigerator
or freezer a clearance of 5 cm at the
sides is required, in order to prevent
the formation of condensation on
the outside of the appliance.
Your appliance needs air
For safety reasons, minimum
ventilation must be as shown Fig.
Attention: keep ventilation
openings clear of obstruction.
Rear spacers
In the bag with the documentation,
there are two spacers which must be
fitted.
Slacken the screws and insert the
spacer under the screw head, then
re-tighten the screws.
PR153
8
Electrical connection
Before initial start-up, refer to the appliance rating plate to ascertain if
supply voltage and current values correspond with those of the mains at the
installation location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V~ 50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
A correctly installed, earthed socket is required for the electrical supply. The
supply must have a fuse rating of at least 10 Amps.
If the socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance from the
mains (e.g. fuse, cut-out, current trip or similar with a minimum contact
separation of 3 mm).
Attention: The mains connection cable may only be replaced by a skilled
electrician. Please contact your dealer or our customer service department
for repairs.
Prior to Initial Start–Up
• Please clean the appliance interior and all accessories prior to initial start-
up (see section: “Cleaning and Care”).
Door Reversibility
The door reversibility is not possible.
9
Control panel
MODE RESET
A
B
C
D
E
F
G
H
I
L
M
A Fridge section indicator
B Temperature indicator for fridge section
C Buttons for setting temperature for fridge section
D Thermometer indicator for fridge section (with COOLMATIC)
E MODE button for setting the operating mode
F Text display
G RESET button
H Freezer section indicator
I Temperature indicator for freezer section
L Buttons for setting temperature for freezer section
M Thermometer indicator for freezer section (with FROSTMATIC)
Temperature setting buttons
The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER)
buttons.
These buttons are connected to the temperature display.
• The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the
DESIRED temperature (Temperature display flashes) by pressing one of the
two buttons, „+“ (WARMER) or „-“ (COLDER).
• Each time one of the two buttons is pressed again the DESIRED
temperature is adjusted by 1 °C.
• If neither button is pressed, the temperature display automatically
switches back after a short period (approx. 5 sec.) to the display of the
ACTUAL temperature.
10
DESIRED temperature means:
The temperature that has been selected for inside the fridge or the freezer
compartment. The DESIRED temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the fridge
or the freezer compartment. The ACTUAL temperature is indicated with
illuminated numbers.
Temperature Displays
The temperature displays shows several types of information.
• In normal operation the average temperature in the fridge section is
displayed (ACTUAL temperature). The variations in temperature in the whole
fridge section are small.
• In the freezer section the warmest temperature is displayed (ACTUAL
temperature). When fully filled, the warmest zone is normally located at the
top in the front area of the freezer section. Depending upon how the
section is filled, the temperatures are lower in other areas of the freezer
section.
• When the temperature is being adjusted a flashing display indicates the
fridge or the freezer compartment temperature currently set (DESIRED
temperature).
Tip: When changing the temperature setting wait about 24 hours until the
temperature display has stabilised.
• When there is a temperature warning for the freezer compartment, if the
RESET button is activated, the temperature display will show for 5 seconds
the warmest temperature the frozen food has reached.
• If there is a fault in the appliance the temperature display shows:
– a square or a letter in the temperature display of the fridge for a fault in
the fridge,
– a square or a letter in the temperature display of the freezer for a fault in
the freezer.
MODE button
Different operating modes can be set using the MODE button.
The following operating modes can be selected:
– SHOPPING: Fridge temperature value 2 °C for 6 hours, cooling for freezer
section runs for 1 hour in continuous operation.
– FROSTMATIC: Cooling for the freezer section runs for 52 hours in
continuous operation.
– COOLMATIC: Fridge temperature value 2 °C for 6 hours.
11
– FROSTMATIC and COOLMATIC:
Cooling for freezer section runs for 52 hours in continuous operation, fridge
temperature value 2 °C for 6 hours.
– HOLIDAY: Fridge temperature value approx 14 °C.
– : Normal operation according to the required temperatures set.
1. Press MODE button once. In the display the operating mode SHOPPING
will flash.
2. After approx. 4 seconds the display stops flashing, the operating mode
SHOPPING is set.
3. If another operating mode is to be set, before 4 seconds have elapsed,
press the MODE button repeatedly until the desired mode is shown in the
display. After approx. 4 seconds have elapsed, the display stops flashing, the
operating mode is set. If the MODE button is pressed again, the next
operating mode appears in the display.
To return to normal operation, press the MODE button repeatedly until no
words appear in the display (“ ”).
Text display
The names of the various operating modes that can be set with the MODE
button and the words indicating an alarm, power cut or electrical fault
appear in the text display.
• Operating modes: SHOPPING, FROSTMATIC, COOLMATIC, FROSTMATIC
and COOLMATIC, HOLIDAY, empty field when operating normally.
• Alarm: TEMPERATURE when there is a temperature warning
• After power cut: POWER displayed
• Electrical fault: SERVICE displayed
RESET button
With the RESET button, the acoustic warning signal can be switched off
When there is a temperature warning for the freezer compartment, if the
RESET button is activated, the temperature display will show for 5 seconds
the warmest temperature the frozen food has reached.
12
Prior to Initial Start-Up
Before connecting the appliance to the mains and putting it into ope-ration
for the first time, leave the appliance to stand for 30 minutes if was
transported upright. After transport on its side, the appliance must be left
to stand for 2 hours before putting it into operation. This is necessary to
allow the oil to flow back into the compressor. Otherwise the compressor
may be damaged.
1. Please clean the appliance interior and all accessories prior to initial startup (see section: "Maintenance and Cleaning").
2. The appliance must be correctly installed in accordance with the chapter
"Installation" before it is put into operation for the first time. Care should
be especially taken that the mains voltage and frequency available
correspond with the appliance’s rating plate.
Initial Start-Up
1. Insert plug into mains socket.
2. The temperature indicator and the back lighting light up, the appliance
starts up. An alarm sounds, TEMPERATURE appears in the display and the
back lighting flashes in red.
3. Switch off alarm and red back lighting using RESET button. The
TEMPERATURE indicator goes out, if the temperature in the appliance has
gone below the warning temperature.
3 Temperature settings set in the factory: +5 °C for the fridge section, -18
°C for the freezer section.
4. Set the refrigerator to the desired temperature (see section: "Temperature Adjustment").
Goods to be refrigerated can be loaded shortly after switching on, because
the storage temperature in the refrigerator is quickly reached.
13
5. Set the freezer temperature to -18 °C or colder (see section: "Temperature Adjustment").
Do not load freezer with goods until a temperature of -18 °C has been
reached, or until the red warning indicator light has gone out..
Temperature Adjustment
With the individual temperature setting buttons the desired temperatures
in the refrigerator and in the freezer compartment can be adjusted
independently of one another.
1. Press either the „+“ (WARMER) or „-“ (COLDER) button for the refrigerator or freezer compartment .
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
2. To adjust to a warmer temperature, press the „+“ (WARMER) button. To
adjust to a colder temperature, press the „-“ (COLDER) button. The changed
setting is immediately displayed on the temperature display.
Each time the button is pressed the temperature is adjusted by 1 °C.
Adjustable temperature range for the freezer compartment:
-15 °C to -24 °C.
Adjustable temperature range for the refrigerator compartment:
+2 °C to +8 °C, (HOLIDAY: +14 °C )
Note: +5 °C for the refrigerator compartment and -18 °C for the freezer
compartment should be considered cold enough as a storage temperature.
3. When the buttons are not further pressed after an adjustment has been
made, after a short period (approx. 5 sec.) the temperature display switches
over and again displays the ACTUAL temperature in the refrigerator
compartment. The display changes from flashing to illuminated numbers.
When the setting is changed, the compressor does not start immediately if
automatic defrosting is currently taking place.
The display lighting switches itself on when any button is touched. If no
button is pressed, the display lighting switches itself off after approx. 1
minute.
Important! Please check regularly on the warning display and on the
temperature display that the storage temperature is being maintained.
Tip:
The appliance setting cannot be changed when the mains plug is pulled out
or there is no power supply.
When reconnected to the mains supply, the appliance takes on the state it
had at the time of the interruption to the power supply.
14
Operating modes
Using the MODE button different operating modes can be selected. The
operating modes are automatically switched off after a corresponding
period, but can also be manualled ended each time. To do this, press the
MODE button repeatedly until there are no longer any words appearing in
the display. After the operating modes have been completed, the appliance
continues to run with the previously set desired temperatures.
As long as the figures in the temperature display are still flashing after the
desired temperature has been set, no operating mode can be set with the
MODE button.
SHOPPING
The SHOPPING function is suitable for quickly cooling larger quantities of
refrigerated foods in the fridge section, as well as for smaller amounts of
frozen foods in the freezer section, e. g. after a big shop.
This automatically sets a desired temperature of +2 °C for the fridge section
for 6 hours. Cooling for the freezer section runs for 1 hour in continuous
operation.
1. Press the MODE button repeatedly until SHOPPING is flashing in the
display.
After approx. 4 seconds the operating mode SHOPPING is activated, the
SHOPPING indicator lights up. Both thermometer indicators in the display
show a falling temperature column.
The SHOPPING function is automatically switched off after 6 hours.
The SHOPPING indicator will go out.
The display lighting switches itself on when any button is touched. If no
button is pressed, the display lighting switches itself off after approx. 1
minute.
FROSTMATIC
The FROSTMATIC function provides for quick freezing of fresh food
products, and at the same time protects previously stored goods against
undesired warming in the freezer compartment.
The cooling of the freezer section runs for about 52 hours in continuous
operation.
1. Press the MODE button repeatedly until FROSTMATIC is flashing in the
display.
After approx. 4 seconds the operating mode FROSTMATIC is activated, the
FROSTMATIC indicator lights up. The thermometer indicator in the display
for the freezer section shows a falling temperature column.
15
The operating mode FROSTMATIC is automatically switched off depending
on how the appliance is filled at the latest after approx. 52 hours. The
FROSTMATIC indicator will go out.
COOLMATIC
The COOLMATIC operating mode is suitable for quickly cooling larger
quantities of refrigerated foods in the fridge section, e. g. drinks, salads for
a party or wedding.
1. Press the MODE button repeatedly until COOLMATIC is flashing in the
display.
After approx. 4 seconds the operating mode COOLMATIC is activated, the
COOLMATIC indicator lights up. The thermometer indicator in the display
for the fridge section shows a falling temperature column.
The COOLMATIC function now provides for intensive cooling. A DESIRED
temperature of +2 °C is automatically selected. The COOLMATIC function is
ended automatically after a period of 6 hours. The originally selected
DESIRED temperature is again valid. The temperature display shows the
ACTUAL refrigerator temperature.
FROSTMATIC and COOLMATIC
When the FROSTMATIC and COOLMATIC functions are combined, a desired
temperature of +2 °C is automatically set for the fridge section for 6 hours.
Cooling for the freezer section runs for 52 hours in continuous operation.
1. Press the MODE button repeatedly until FROSTMATIC and COOLMATIC are
flashing in the display at the same time.
After approx. 4 seconds the operating mode FROSTMATIC and COOLMATIC
is activated, the FROSTMATIC und COOLMATIC indicators light up. Both
thermometer indicators in the display show a falling temperature column.
The function FROSTMATIC and COOLMATIC is automatically switched off:
COOLMATIC after 6 hours, FROSTMATIC after 52 hours at the latest.
The indicators go out accordingly.
HOLIDAY
In the operating mode HOLIDAY (holiday setting) the desired temperature
value for the fridge section is +14 °C. In the holiday mode it is therefore
possible to leave the door of the empty refrigerator closed during periods of
extended absence. Advantage: Unintentional closing of the door, or
accidental closing of the door by persons who have access to your home
during your absence, is no longer possible. Without the holiday mode
leaving the door closed would lead to the accumulation of odours and
mould.
16
After emptying and cleaning the appliance, proceed as follows:
1. To switch on the holiday setting, press the MODE button repeatedly
until HOLIDAY is flashing in the display.
After approx. 4 seconds the operating mode HOLIDAY is activated, HOLIDAY
lights up.
Important! Do not store any goods in the refrigerator when the holiday
mode is in operation. The temperature is regulated at about +14 °C when
the holiday mode is in operation. This is too warm for food products.
Switching the Appliance Off
To switch the entire appliance off, remove the mains plug or switch off.
If the appliance is not to be used for an extended period:
1. Remove the mains plug or switch off.
2. Clean the appliance (see section: "Maintenance and Cleaning").
3. Leave the doors open after defrosting to avoid accumulation of odours.
Control and Information Systems
The control and information systems consist of a temperature display, an
optical warning indicator light and an acoustic warning.
The system warns:
– when there was a power cut;
– when the temperature in the refrigerator or freezer compartment is too
high;
– if there are functional disturbances at the appliance.
Power cut warning
After an interruption to the power supply, POWER is displayed in the display
and the current Actual temperature is displayed again. The appliance
continues to run with the previously selected settings. The POWER indicator
goes out, as soon as any button is pressed.
17
Temperature warning
For the freezer section:
An alarm sounds and the TEMPERATURE indicator and red back light flash,
as soon as the temperature in the freezer section rises above -11 °C. In
addition the temperature display for the freezer section flashes.
If the temperature in the freezer section falls back below -11 °C, the alarm
automatically switches itself off. The TEMPERATURE indicator and the red
back lighting continue to flash.
1. You can turn off the alarm and the red back lighting using the RESET
button.
For 5 seconds the temperature display for the freezer section shows the
warmest temperature that was reached in the freezer section during the
temperature warning. After that the temperature display stops flashing and
switches back to the current temperature in the freezer section. The
TEMPERATURE indicator continues to flash, as long as there is a temperature
warning.
If there is an interruption to the power supply during an alarm, when the
appliance is reconnected to the supply, it starts with an acoustic and visual
alarm.
If the possibility of partial or complete thawing exists, you should check the
quality of the foods.
A rise in temperature may be caused by:
– frequent door opening for long periods of time;
– loading with large quantities of warm foods;
– high ambient temperature;
– an error with the appliance.
Function Errors
If the appliance’s electronics recognise a technical problem that has to be
remedied by the Customer Service Department, an alarm sounds and the
SERVICE indicator appears back lit with a flashing red light.
The temperature display indicates:
– a square or a letter in the temperature display of the fridge for a fault in
the fridge,
– a square or a letter in the temperature display of the freezer for a fault in
the freezer.
1. Using the RESET button you can switch off the alarm and the flashing red
light. The SERVICE indicator continues to be lit as long as there is an
electrical malfunction.
18
Interior Accessories
Storage Shelves
The glass shelf above the fruit and
vegetable compartment should
always remain in position, to ensure
fruit and vegetables stay fresh
longer.
The remaining storage shelves can be
adjusted to various heights:
Pull the storage shelf forward until it
can be tipped up or down and
removed. To insert at a different
height use the same procedure in
reverse.
Variable Inner Door
The door compartments can be pulled up and removed, and inserted at
other positions as needed.
D338
Bottle holder
Place the bottles (with the opening
facing front) in
the pre- positioned shelf.
If the shelf is positioned horizontally,
place only
closed bottles.
This bottle holder shelf can be tilted
in order to store
previously opened bottles.
To obtain this result, pull the shelf up
so it can rotate
upwards and be placed on the next
higher level.
Loading...