AEG-Electrolux F54750 User Manual

Download

Page 1

FAVORIT 54750

Dishwasher

Instruction book

PERFEKT IN FORM UND FUNKTION

152955 17/0en 6-04-2005 8:53 Pagina 1

Page 2

Dear customer,

Please read this User Information carefully and keep it to refer to at a later date. Pass it on to any subsequent owner of the appliance.

The following symbols are used in the text:

Safety instructions

Warning! Notes that concern your personal safety. Attention! Notes that show how to avoid damage to the appliance.

Useful tips and hints

Environmental information

Your dishwasher has the new washing system ”IMPULSE WASHING”. With this dishwashing system the motor speed and spray pressure are varied during the wash cycle to achieve better cleaning of the dishes. It is for this reason that the noise level varies during the dishwashing cycle.

152955 17/0en 6-04-2005 8:53 Pagina 2

Page 3

CONTENTS

Operating instructions 4

Safety instructions 4 Disposal 6 Economical and ecological dishwashing 6 Description of the appliance 7 The control panel 8 Prior to using for the first time 12

The water softener 12 Filling with dishwasher salt 15 Rinse aid 16

In daily use 18

Loading cutlery and dishes 18 The lower basket 19 The cutlery basket 20 The upper basket 21 Adjusting the height of the upper basket 22 Use of detergent 23 Different kinds of detergent 24

Washing programmes 26 Starting a washing programme 28 Maintenance and cleaning 31

Cleaning the filters 31

Something not working 34

Service 37 Guarantee Conditions 39

Technical specifications 41

Installation instructions 42

Fitting under a counter 42 Levelling 42 Water supply connections 43 Water inlet hose with safety valve 44 Water outlet hose connection 45 Electrical connection 46

Hints for test centres 48

Contents

152955 17/0en 6-04-2005 8:53 Pagina 3

Page 4

OPERATING INSTRUCTIONS

Safety instructions

The safety of AEG electrical appliances conforms to accepted rules of technology and the Appliance Safety Act. We as manufacturers, however, see ourselves as being obliged to familiarise you with the following safety instructions.

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.

If you are unsure about any aspect of the information in this book, please contact our customer care department on 08705 950 950

Installation

● Check your dishwasher for any transport damage. Never connect a

damaged machine. If your dishwasher is damaged, you should contact your supplier.

● For safety reasons it is dangerous to alter the specifications or

attempt to modify this product in any way.

● Any electrical and plumbing work required to install this appliance

should be carried out by a qualified and competent person.

● Care must be taken to ensure that the appliance does not stand on

the electrical supply cable.

● The sides of the dishwasher must never be drilled to prevent

damage to hydraulic components.

Child safety

● This appliance is designed to be operated by adults.

● Children should not be allowed to tamper with the controls or play

with the product.

Operating instructions

152955 17/0en 6-04-2005 8:53 Pagina 4

Page 5

● Packaging parts may be dangerous for children, who could even be

suffocated! You should therefore keep all packaging well away from children.

● The water in your dishwasher is not for drinking. Detergent residues

may still be present in your machine. Keep children well away from your dishwasher when the door is open.

● Keep all detergents in a safe place out of children’s reach.

Your dishwasher in day-to-day use

● Items that are contaminated by petrol, paint, steel or iron debris,

corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.

● Under no circumstances should you open the door whilst the

appliance is in operation, especially during the washing phase, hot water may escape. However, if the door is opened, a safety device ensures that the machine stops.

● Only use products (detergent, salt and rinse aid) specifically

designed for use in dishwashers.

● Long bladed knives stored in an upright position are a potential

hazard.

● Long and/or sharp items of cutlery such as carving knives must be

positioned horizontally in the upper basket.

● Ensure that the door of the dishwasher is always closed when it is

not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.

● When finishing loading or unloading close the door, as an open

door can be a hazard.

● Do not sit or stand on the open door.

● Isolate the appliance from the power supply and turn off the water

supply after use.

● This product should be serviced by an authorised service engineer,

and only genuine spare parts should be used.

● Under no circumstances should you attempt to repair the machine

yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

Operating instructions

152955 17/0en 6-04-2005 8:53 Pagina 5

Page 6

Disposal

Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled.

Plastic parts are marked with standard international abbreviations: >PE< for polyethylene, e.g. sheet wrapping material.

>PS< for polystyrene, e.g. padding material (always CFC-free). >POM< for polyoxymethylene, e.g. plastic clips.

Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling.

As and when you cease to use your dishwasher and withdraw it from service, your should render it unserviceable before having it disposed of.

Warning! Children at play could lock themselves in your dishwasher or otherwise endanger their lives. Therefore cut off the power supply cable and make the door closing device unusable to prevent children from being trapped inside.

For the disposing of the appliance please take it to a recycling centre or to your dealer who may, for a small contribution to the costs, dispose it for you.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Economical and ecological dishwashing

● Ensure that the water softener is correctly adjusted.

● Do not pre-wash under running water.

● Select the wash programme to suit the nature and degree of the

soiling on the dishes.

● Do not use more detergent, dishwasher salt and rinse aid than is

recommended in these operating instructions and by the manufacturer of the respective product.

Operating instructions

152955 17/0en 6-04-2005 8:53 Pagina 6

Page 7

Operating instructions

Description of the appliance

1. Upper basket stop

2. Water hardness switch

3. Salt container

4. Detergent dispenser

5. Control panel

6. Rating plate

7. Rinse aid dispenser

8. Filters

9. Lower spray arm

10. Upper spray arm

11. Upper basket

12.Worktop

IN154

152955 17/0en 6-04-2005 8:53 Pagina 7

Page 8

Operating instructions

Function buttons: in addition to the dishwashing programme

selected, the following functions can also be set with the help of these buttons:

- the setting of the water softener,

- activation/deactivation of the rinse aid dispenser,

- activation/deactivation of the 3 in 1 function,

- the cancelling of a programme in progress.

Programme selection buttons: the selection of a washing

programme occurs by pressing one of these buttons (see "Washing programmes" chart).

"Delay start" button: this option allows the start of the programme

to be delayed by 3, 6, or 9 hours.

Indicator lights: have the following meanings:

The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary.

On/Off button

Programme selection

buttons

Function buttons

Indicator lights

“Delay start”

button

3 4

The control panel

Door handle

Salt refilling indicator light, illuminates when the salt has run out

Rinse aid refilling indicator light, illuminates when the rinse aid has run out

152955 17/0en 6-04-2005 8:53 Pagina 8

Page 9

Operating instructions

"3 in 1" function

This appliance is equipped with the 3 in 1 function, that allows the use of the "3 in 1" combi detergent tablets.

This function can be selected with all washing programmes. With the selection of this function the inflow of rinse aid and salt

from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.

Select the 3 in 1 function before the set of a washing programme. Once selected this function (indicator light illuminated) it will remain

active also for the following washing programmes. With the use of 3 in 1 function, the cycle durations given in the

“Washing programmes” chart may change. NOTE: Once the programme is running, the 3 in 1 function can NO

longer be changed. If you want to exclude the 3 in 1 function you have to cancel the programme setting (see chapter "Starting a washing programme" - "Cancel a washing programme in progress") and then deactivate the 3 in 1 function. In this case you have to set a washing programme (and eventual options) again.

Programme in progress: illuminates when a washing programme has been set and remains illuminated for all the duration of the washing programme.

Turns off when the washing programme has ended. When delay start has been set, this indicator light turns off

and will come on again once the countdown has elapsed and the washing programme has started.

End of programme: illuminates when the washing programme has ended, it also has added functions of visual signalling as:

- the setting of the water softener,

- activation/deactivation of the rinse aid dispenser,

- intervention of an alarm due to the malfunction of the machine.

3 IN 1 3 in 1 function: indicates the activation/deactivation of the

3 in 1 function (see “3 in 1 function”).

152955 17/0en 6-04-2005 8:53 Pagina 9

Page 10

Operating instructions

Activation/deactivation of the 3 in 1 function

(The dishwasher must be switched off)

1. Press the On/Off button. The indicator lights of the programme selection buttons will illuminate (setting mode). If only one programme selection button indicator light is illuminated this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3 for about 2 seconds, the indicator light of the set programme button starts flashing. After about 2 seconds the indicator lights of all the programme selection buttons will illuminate, this means that the set washing programme has been cancelled and the machine is now in setting mode.

2. Press simultaneously function buttons 2 and 3, until the indicator lights of function buttons 1, 2, 3 and 4 start flashing.

3. Press function button 4, the indicator lights of function buttons 1, 2 and 3 turn off while the indicator light of function button 4

goes on flashing.

4. Press function button 4 again, the “3 in 1” indicator light illuminates, indicating that the “3 in 1 function” is active. To deactivate the function press function button 4 again, the indicator light turns off.

5. To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

3 in 1 function active indicator light on 3 in 1 function not active indicator light off

152955 17/0en 6-04-2005 8:53 Pagina 10

Page 11

Operating instructions

NOTE: if the drying results are not satisfactory it is possible to activate only the rinse aid dispenser. The activation/deactivation of the rinse aid dispenser can only be possible with the 3 in 1 function active.

Activation/deactivation of the rinse aid dispenser

(The dishwasher must be switched off)

When the rinse aid dispenser has been activated, the rinse aid indicator light on the control panel is automatically activated.

1. Press the On/Off button. The indicator lights of the programme

selection buttons will illuminate (setting mode). If only one programme selection button indicator light is illuminated this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3 for about 2 seconds, the indicator light of the set programme button starts flashing. After about 2 seconds the indicator lights of all the programme selection buttons will illuminate, this means that the set washing programme has been cancelled and the machine is now in setting mode.

2. Press simultaneously function buttons 2 and 3, until the indicator lights of function buttons 1, 2, 3 and 4 start flashing.

3. Press function button 2, the indicator lights of function buttons 1, 3 and 4 turn off while the indicator light of function button 2 goes

on flashing.

4. To activate the rinse aid dispenser, press function button 2 again, the indicator light end of programme illuminates, indicating that the rinse aid dispenser has been activated.

5. To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

To deactivate the rinse aid dispenser again, follow the above instructions until the indicator light end of programme turns off.

152955 17/0en 6-04-2005 8:53 Pagina 11

Page 12

Operating instructions

Prior to using for the first time

Before using your dishwasher for the first time:

1. Ensure that the electrical and water connections comply with the installation instructions

2. Remove all packaging from inside the appliance

3. Set the water softener

4. Pour 1 litre of water inside the salt container and then fill with

dishwasher salt

5. Fill the rinse aid dispenser.

The water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is.

Water hardness is measured in equivalent scales, German degrees, French degrees and mmol/l (millimol per litre).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using the water hardness dial and electronically, using the function buttons on the control panel.

Adjusting the water

hardness setting

9 8 7 6

3 3

no salt

necessary

Manually

Electronically

Number of

flashes of the

“end of

programme”

indicator light

2 2

Water hardness

51 - 70 43 - 50 37 - 42 29 - 36 23 - 28

9,0 - 12,5 7,6 - 8,9 6,5 - 7,5 5,1 - 6,4 4,0 - 5,0

11 - 14 1,9 - 2,5 II

< 4 < 0,7 I

4 - 10 0,7 - 1,8 I/II

19 - 22 15 - 18

3,3 - 3,9 2,6 - 3,2

III

5 4

°dH

(german degrees)

91 - 125 76 - 90 65 - 75 51 - 64 40 - 50

19 - 25

< 7

7 - 18

33 - 39 26 - 32

°TH

(french

degrees)

mmol/l

(millimol per litre,

international unit for

the hardness of water)

Range

152955 17/0en 6-04-2005 8:53 Pagina 12

Page 13

Operating instructions

a)Setting manually

1. Open the dishwasher door.

2. Remove the lower basket from the dishwasher.

3. Turn the water hardness dial to

position 1 or 2 (see table).

4. Replace the lower basket. The dishwasher is factory set at

position 2.

b)Setting electronically

(The dishwasher must be switched off) NOTE: the electronic setting of the water softener is possible ONLY

with the 3 in 1 function deactivated. The dishwasher is factory set at level 5.

2. Press simultaneously function buttons 2 and 3, until the indicator lights of function buttons 1, 2, 3 and 4 start flashing.

152955 17/0en 6-04-2005 8:53 Pagina 13

Page 14

Operating instructions

3. Press function button 1, the indicator lights of function buttons 2, 3 and 4 turn off while the indicator light of the button 1 goes on

flashing, at the same time the indicator light end of programme starts to flash. The current level is indicated by the number of flashes of the indicator light end of programme (see chart).

Example:

5 flashes = level 5.

4. To change the level, press function button 1. Each time the button is pressed the level changes. (For the selection of the new level see the chart).

Examples:

if the current level is 5, by pressing function button 1 once, level 6 is selected.

if the current level is 10, by pressing function button 1 once, level 1 is selected.

5. To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

152955 17/0en 6-04-2005 8:53 Pagina 14

Page 15

Operating instructions

Filling with dishwasher salt

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1. Open the door, remove the lower basket and unscrew the cap of

the salt container by turning it anticlockwise.

2. Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

3. Using the funnel provided, pour in the salt until the container is full.

4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5. Replace on the cap tightly turning it clockwise until it stops with a click.

The salt container will require topping up periodically. You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

152955 17/0en 6-04-2005 8:53 Pagina 15

Page 16

Operating instructions

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1. Open the container by pressing the release button (A).

2. Add the rinse aid until the container is completely full. The

maximum level for filling is indicated by “max”.

Ensure that the lid is closed after every refill. Clean up any rinse aid spilt during filling with an absorbent cloth

to avoid excess foaming during the next wash. Only use branded rinse aid for dishwashers. Never fill the rinse aid

dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

152955 17/0en 6-04-2005 8:53 Pagina 16

Page 17

Operating instructions

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage).

The dose is factory set in position 4. Increase the dose if there are drops of

water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Top up the rinse aid when the indicator light on the control panel illuminates.

152955 17/0en 6-04-2005 8:53 Pagina 17

Page 18

Operating instructions

In daily use

• Check if it’s necessary to refill with dishwasher salt or rinse aid.

• Load cutlery and dishes into the dishwasher.

• Fill with dishwasher detergent.

• Select a wash programme suitable for the cutlery and dishes.

• Start the wash programme.

Loading cutlery and dishes

Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.

• Before loading the dishes, you should:

- Remove large left-overs.

- Soften remnants of burnt food in pans.

• When loading the dishes and cutlery, please note:

- Dishes and cutlery must not impede the rotation of the spray arms.

- Load hollow items such as cups, glasses, pans etc, with the opening downwards so that water cannot collect in the container or a deep base.

- Dishes and items of cutlery must not lie inside one another, or cover each other.

- To avoid damage to glasses, they must not touch.

- Lay small objects in the cutlery basket.

• Plastic items and pans with teflon have a tendency to retain water drops; these items will not dry as well as porcelain and steel items.

152955 17/0en 6-04-2005 8:53 Pagina 18

Page 19

Operating instructions

Open the door and slide out the baskets to load the dishes.

The lower basket

The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.

Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the spray arms can turn freely.

For washing in the dishwasher the following cutlery/dishes

are not suitable:

• Cutlery with wooden, horn, china or

mother-of-pearl handles

• Plastic items that are not heat resistant

• Older cutlery with glued parts that is not

temperature resistant

• Bonded cutlery items or dishes

• Pewter or copper items

• Lead crystal glass

• Steel items subject to rusting

• Wooden platters

• Items made from synthetic fibres

• Only wash stoneware in the dishwasher if it

is specifically marked as being dishwashersafe by the manufacturer.

• Glazed patterns may fade if machine washed frequently.

• Silver and aluminium parts have a tendency to discolour during washing. Residues, e.g. egg white, egg yolk and mustard often cause discolouring and staining on silver. Therefore always clean left-overs from silver immediately, if it is not to be washed straight after use.

• Some types of glass can become dull after a large number of washes.

are of limited suitability:

152955 17/0en 6-04-2005 8:53 Pagina 19

UI51

UI12

Page 20

Operating instructions

The cutlery basket

Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.

Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards.

Mix spoons with other cutlery to prevent them from sticking together. To unload your dishwasher more easily, you can take the cutlery basket

out of the lower basket and unfold it. This makes it easier to remove small pieces of cutlery.

Important note! To prevent the full cutlery basket from inadvertently unfolding when being taken out, place your hand right round the twopiece handle and hold it firmly.

1. Place the cutlery basket on a firm support (table, worktop) and unfold both handle parts.

2. After unfolding, fold back both handle parts.

152955 17/0en 6-04-2005 8:53 Pagina 20

UI25

UI20

Page 21

Operating instructions

The upper basket

The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses.

Arrange items on and underneath the cup racks so that water can reach all surfaces.

Glasses with long stems can be placed upside down in the cup racks. For taller items, the cup racks can be folded upwards. Light items (plastic bowls etc.) must be loaded in the upper basket and

arranged so they do not move.

Before closing the door, ensure that the spray arms can rotate freely.

152955 17/0en 6-04-2005 8:53 Pagina 21

Page 22

Operating instructions

Adjusting the height of the upper basket

If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position.

To move to the higher position proceed as follows:

1. Move the front runner stops (A) of the upper basket outwards

and slide the basket out.

2. Refit the basket in the higher position and replace the stops (A) in their original position.

When the basket is in the higher position you will not be able to use the cup rack(s).

After loading your machine always close the door, as an open door can be a hazard.

With upper basket raised 20 cm 31 cm With upper basket lowered 24 cm 27 cm

Maximum height of the dishes in:

upper basket lower basket

152955 17/0en 6-04-2005 8:53 Pagina 22

RC01

Page 23

Operating instructions

Use of detergent

Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents. Using no more than the correct amount of detergent contributes

to reducing pollution. Please observe the manufacturer’s dosing and storage

recommendations as stated on the detergent packaging.

Fill with detergent

1. If the lid is closed: press release button (1). The lid springs open.

2. Fill the detergent dispenser (2) with detergent.

The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent

3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (3). This detergent will take effect during the prewash phase.

4. Close the lid and press until it locks in place.

152955 17/0en 6-04-2005 8:53 Pagina 23

Page 24

Operating instructions

Different kinds of detergent

Detergent tablets

Detergent tablets of different brands dissolve at different speeds. For this reason some detergent tablets cannot dissolve and develop their full cleaning power during short programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of detergent residuals.

Do not place the tablets in the tub or in the cutlery basket as this will result in poorer wash results. The tablets should be placed in the detergent dispenser.

Concentrated detergent

Based on their chemical composition, dishwasher detergents can be split into two basic types:

- conventional, alkaline detergents with caustic components.

- low alkaline concentrated detergents with natural enzymes. The use of 50°C washing programmes in conjunction with

concentrated detergents reduces pollution and is good for your dishes; these wash programmes are specially matched to the dirt-dissolving properties of the enzymes in the concentrated detergent. For this reason 50°C wash programmes in which concentrated detergents are used can achieve the same results that can otherwise only be achieved using 65°C programmes.

Combi detergents

If you are using dishwasher detergent that includes the rinse aid function, this must be placed in the detergent compartment. In this case the rinse aid dispenser must be empty, in order to avoid a double dosage. If in the rinse aid dispenser there is still rinse aid you must wait until it has finished before using these kind of detergents.

The rinse aid indicator light will always remain illuminated when the machine is switched on (not all dishwasher models are foreseen with rinse aid indicator light).

Special salt for dishwasher must still be used.

152955 17/0en 6-04-2005 8:53 Pagina 24

Page 25

Operating instructions

Use of "3 in 1" combi detergents

General advice

These products are detergents with integrated and combined detergent/rinse-aid and salt functions.

1. Before using these products you should first check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers (on the product packaging).

2. These products should be strictly used according to the detergent

manufacturers instructions.

3. If you encounter problems when using 3 in 1 products for the first time then please contact the detergent manufacturers care line (the telephone number is given on the product packaging).

Special advice

When using combination 3 in 1 products select the “3 in 1” function.

If you decide to turn back to the use of the standard detergent system we advise that you:

● Refill both the salt container and rinse aid dispenser.

● Switch the water hardness setting to the highest possible position

and run from 1 to 3 normal washing programmes without a load.

● Readjust the water hardness setting again according to the

hardness of the water in your area.

LIQUID GEL

POWDER

EASY

POURING

PACK

152955 17/0en 6-04-2005 8:53 Pagina 25

For best results we recommend the use of Finish detergents, rinse aid and salt.

ACTION

DOUBLE

CONCENTRATED DISHWASHER DETERGENT

DE15

BRILLIANT

FOR A

SHINE

RINSE

Page 26

Operating instructions

Washing programmes

(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil).

This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.

(2) Testing programme for EN 50242 (see "Hints for Test Centres). This programme, developed

for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been extended.

(3) The consumption values are intended as a guide and depends on the pressure and the

temperature of the water and also by the variations of the power supply.

Programme

30 MIN.

Crockery and cutlery

Fresh soil

- • - • -

0,7

0,8

AUTOMATIC

Crockery, cutlery, pots and pans

Normal / light soil

105

• •

•

1/2x

• •

0,8

1,2

INTENSIV CARE 70°

Crockery, cutlery, pots and pans

Heavy soil

115

125

• •

•

• •

1,6

1,8

ECO 50°

Crockery and cutlery

Normal soil

160

170

• • • • •

0,75

0,8

Type of

load

Degree of

soil

Consumption

values

Cycle

description

Pre-rinse

Main wash

Intermediate

Final rinse

Drying

Duration (minutes)

Energy (kWh)

Water (litres)

(Rinse and Hold)

Any. Partial load (to be completed later in the day).

This programme does not require the use of detergent.

• - - - -

0,13 -

152955 17/0en 6-04-2005 8:53 Pagina 26

Page 27

"AUTOMATIC" washing programme

During the "AUTOMATIC" washing programme the amount of soil on the dishes is determined by how cloudy the water is. If the appliance is partially loaded and the dishes lightly soiled, the "prewash", "main wash", and "rinse" phases of the programme are shorter and the water consumption level is lower.

If the appliance is fully loaded and the dishes heavily soiled, the "prewash"", main wash", and "rinse" phases of the programme are longer and the water consumption level is higher.

For this reason the programme duration, water and energy consumption levels can vary within the stated range for AUTOMATIC programme (see "Washing programmes chart").

During the "AUTOMATIC" programme the temperature of the main wash water is also automatically adjusted between 50°C and 65°C depending on the amount of soil on the dishes.

Operating instructions

152955 17/0en 6-04-2005 8:53 Pagina 27

Page 28

Operating instructions

Starting a washing programme

1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2. Turn on the water tap

3. Close the dishwasher door

4. Press the On/Off button

The indicator lights of the programme selection buttons illuminate.

5. Setting and starting the programme

To select a programme, press the button of the programme you wish to select (see "Washing programmes" chart).

The corresponding indicator light remains illuminated while the other programme buttons indicator lights turn off.

The programme in progress indicator light will illuminate. After about 3 seconds from the last pressure of a button the

programme starts automatically. The programme in progress indicator light remains illuminated.

Setting and starting the programme with “delay start”

Set the delay start before selecting a washing programme.

Press the "delay start" button until the indicator light corresponding to the chosen hours flashes (3h, 6h or 9h).

Press the button corresponding to the required programme (see “Washing programmes” chart).

After about 3 seconds from the last pressure of a button the countdown starts automatically.

The countdown will decrease with steps of 3 hours. The opening of the door will not modify or interrupt the

countdown. Once the delay start has elapsed the programme will start

automatically.

152955 17/0en 6-04-2005 8:53 Pagina 28

Page 29

Operating instructions

Note: With the delay start function set, the programme in progress indicator light is off. Once the countdown of the delay

start has elapsed, the washing programme will start automatically and the programme in progress indicator light will illuminate.

Note: it is possible to select a washing programme and the delay start also with the door slightly opened. In this case the start of

the programme or of the countdown will occur after the closure of the door. Until that moment it is possible to modify the set made.

6. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary

Attention! Hot steam may escape when the door is opened. Open the door carefully.

Interrupt a washing programme in progress

a) Open the dishwasher door; the programme will stop.

Close the door; the programme will start from the point at which it was interrupted.

b) Press the On/Off button (in this case all the indicator light turn

off). Press the On/Off button again; the programme will start from the point at which it was interrupted.

Cancel a washing programme in progress

To cancel a washing programme in progress, press simultaneously function buttons 2 and 3 for about 2 seconds, the indicator light of the button corresponding to the running programme starts flashing. After about 2 seconds the indicator lights of all the programme selection buttons will illuminate, this means that the running programme has been cancelled and that the machine has returned to setting mode.

If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

152955 17/0en 6-04-2005 8:53 Pagina 29

Page 30

Operating instructions

7. Cancelling the “delay start”

It is possible to cancel a countdown in progress or before it starts, simply pressing the delay start button until the indicator lights corresponding to delay start hours (3h, 6h or 9h) turn off.

In this case the selected washing programme will start automatically after a 3 seconds.

8. End of the washing programme

The dishwasher will automatically stop and the programme in progress indicator light turns off.

The end of programme indicator light will illuminate. The indicator light of the programme just ended will remain on. If the door is not immediately opened at the end of the

programme, air will circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets.

This device operates intermittently for about 20 minutes, as long as the dishwasher is switched on.

If the On/Off button is pressed or the door is opened during these 20 minutes, the device will be automatically cancelled.

Switch off the dishwasher by pressing the On/Off button. Open the dishwasher’s door, leave it ajar and wait a few minutes

before removing the dishes; in this way they will be cooler and the drying will be improved.

9. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler then the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

152955 17/0en 6-04-2005 8:53 Pagina 30

Page 31

Operating instructions

Maintenance and cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene

etc....).

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash programme without dishes using detergent.

Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.

Cleaning the filters

The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result.

1. Open the door, remove the lower basket.

2. The dishwasher filter system comprises a coarse filter (A), a

microfilter (B) and a flat filter (C). Unlock the filter system using the handle on the microfilter, and remove.

3. Turn the handle about

/4a turn anticlockwise and remove.

152955 17/0en 6-04-2005 8:53 Pagina 31

MA39

Page 32

Operating instructions

4. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B).

5. Clean all filters thoroughly under running water.

6. Remove the flat filter (C) from the base of the washing

compartment and clean both faces thoroughly.

7. Put the flat filter (C) back in the base of the washing compartment.

8. Place the coarse filter (A) in the microfilter (B) and press together.

9. Put the filter combination in place and lock by turning the handle

clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment.

Attention!

Under no circumstances may the dishwasher be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results.

NEVER try to remove the upper spray arm.

If residues of soil have clogged the holes in the upper spray arm, remove them with a cocktail stick.

152955 17/0en 6-04-2005 8:53 Pagina 32

Page 33

Operating instructions

Prolonged periods of non-operation

If you are not using the machine for any period of time you are advised to:

1. Unplug the appliance and then turn off the water.

2. Leave the door ajar to prevent the formation of any unpleasant

smells.

3. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving house etc....):

1. Unplug it.

2. Turn the water tap off.

3. Remove the water inlet and discharge hoses.

4. Pull the machine out together with the hoses.

Avoid over tilting the machine during transportation.

152955 17/0en 6-04-2005 8:53 Pagina 33

Page 34

Operating instructions

Something not working

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer.

Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is in guarantee.

...a flashing fault code appears

The dishwasher will not start or stops during operation. The intervention of an alarm is indicated by:

- the continuous flashing of the indicator light of the running

programme,

- a combination of flashing and pauses of the end of programme

indicator light (as described in the chart).

Open the door and carry out the following suggested corrective actions.

-continuous flashing of the indicator light of the running programme

-1 flash of the indicator light "end of programme".

The machine does not fill with water

The water tap is blocked or furred with limescale.

The water tap is turned off. The filter (where present) in

the threaded hose fitting at the water inlet valve is blocked.

Clean out the sink spigot.The sink spigot is blocked. Check the water drain

hose connection.

Clean the water tap.

Turn the water tap on. Clean the filter in the

threaded hose fitting.

The water inlet hose has not been correctly laid or it is bent or squashed.

Check the water inlet hose connection.

The water drain hose has not been correctly laid or it is bent or squashed.

Fault code / Malfunction Possible cause Solutions

-continuous flashing of the indicator light of the running programme

-2 flashes of the indicator light "end of programme".

The dishwasher will not drain

152955 17/0en 6-04-2005 8:53 Pagina 34

Page 35

Operating instructions

...there are problems when operating the dishwasher

The programme does not start

Use a different brand of detergent.

The whistling is not a cause for concern.

The dishwasher door has not been properly closed.

Close the door.

The main plug is not plugged in.

Insert the mains plug.

The fuse has blown in the household fuse box.

Replace the fuse.

For dishwasher models with delay start option: Delay start has been selected.

If dishes are o be washed immediately, cancel the delay start.

There is a whistling noise during washing

Fault Possible cause Solutions

Once the checks have been carried out, close the door and press the button of the programme that was running before the intervention of the alarm, the programme will continue from the point at which it was interrupted. If the fault code reappears contact your local Service Force Centre.

For other combinations of fault codes not described in the above chart will appear, please contact your local Service Force Centre.

Close the water tap and contact your local Service Force Centre.

Anti-flood device has activated.

-continuous flashing of the indicator light of the running programme

-3 flashes of the indicator light "end of programme".

152955 17/0en 6-04-2005 8:53 Pagina 35

Page 36

Operating instructions

...the wash results are not satisfactory

The dishes are not clean

● The wrong washing programme has been selected.

● The dishes were arranged in such a way as to stop water reaching all

parts of the surface. The baskets must not be overloaded.

● The spray arms do not rotate freely due to wrong arrangement of

the load.

● The filters in the base of the washing compartment are dirty or

incorrectly positioned.

● Too little or no detergent has been used.

● Where there are limescale deposits on the dishes; the salt container

is empty or the wrong level of the water softener has been selected.

● The drain hose connection is not correct.

● The salt container cap is not properly closed.

The dishes are wet and dull

● Rinse aid was not used.

● The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on glasses and dishes

● Decrease rinse aid dosing.

Water drops have dried onto glasses and dishes

● Increase rinse aid dosing.

● The detergent may be the cause. Contact the detergent

manufacturer’s consumer care line.

152955 17/0en 6-04-2005 8:53 Pagina 36

Page 37

Service

If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).

This information can be found on the rating plate located on the side of the dishwasher door (see picture).

So that you always have these numbers at hand, we recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . . . . . . . . .

PNC : . . . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . . . .

This product should be serviced by an authorised service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

152955 17/0en 6-04-2005 8:53 Pagina 37

RA07

M o d . . . .

. . .

P . .

. . . . . . . . .

S e r . N o .

. . . . . .. . .

Page 38

Service

Service and Spare Parts

In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning:

08705 929929

Your telephone call will be automatically routed to the Service Force Centre covering your post code area.

For the address of your local Service Force Centre and further information about Service Force, please visit the website at

www

.serviceforce.co.uk

Before calling out an engineer, please ensure you read the details under the heading "Something not working".

When you contact the Service Force Centre you will need to give the following details:

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of the fault

4. The model and serial number of the appliance (found on the

rating plate)

5. The purchase date Please note that a valid purchase receipt or guarantee

documentation is required for in-guarantee service calls.

Customer Care Department

For general enquiries concerning your AEG-Electrolux appliance or for further information on AEG-Electrolux products, please contact our Customer Care Department by letter or telephone at the address below or visit our website at:

www

.AEG.co.uk

Customer Care Department Electrolux 55-77 High Street Slough Berkshire SL1 1DZ Tel: 08705 950950 (*)

calls to this number may be recorded for training purposes

152955 17/0en 6-04-2005 8:53 Pagina 38

Page 39

Guarantee Conditions

Standard Guarantee Conditions

We, AEG-Electrolux, undertake that if within 12 months of the date of purchase this AEG-Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OFCHARGE for labour, materials or carriage on condition that:

● The appliance has been correctly installed and used only on the electricity

supply stated on the rating plate.

● The appliance has been used for normal domestic purposes only, and in

accordance with the manufacturer’s instructions.

● The appliance has not been serviced, maintained repaired, taken apart or

tampered with by any person not authorised by us.

● All service work under this guarantee must be undertaken by a Service

Force Centre.

● Any appliance or defective part replaced shall become the Company’s

property.

● This guarantee is in addition to your statutory and other legal rights.

Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged.

Exclusions

This guarantee does not cover:

● Damage or calls resulting from transportation, improper use or neglect,

the replacement of any light bulbs or removable parts of glass or plastic.

● Costs incurred for calls to put right an appliance which is improperly

installed or calls to appliances outside the United Kingdom.

● Appliances found to be in use within a commercial environment, plus

those which are subject to rental agreements.

● Products of AEG-Electrolux manufacture which are not marketed by

AEG-Electrolux.

152955 17/0en 6-04-2005 8:53 Pagina 39

Page 40

Guarantee Conditions

European Guarantee

If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications:

● The guarantee starts from the date you first purchased your product.

● The guarantee is for the same period and to the same extent for labour

and parts as exists in the new country of use for this brand or range of products.

● This guarantee relates to you and cannot be transferred to another user.

● Your new home is within the European Community (EC) or European Free

Trade Area.

● The product is installed and used in accordance with our instructions and

is only used domestically, i.e. a normal household.

● The product is installed taking into account regulations in your new

country.

Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliance.

France Senlis +33 (0) 344 62 20 13 Germany Nurenberg +49 (0) 800 234 7378 Italy Pordenone +39 (0) 800 11 7511 Sweden Stockholm +46 (0) 20 78 77 50 UK Slough +44 (0) 1753 219898 Ireland Dublin +353 (0)1 4090753

152955 17/0en 6-04-2005 8:53 Pagina 40

Page 41

Operating instructions

Dimensions:

Electrical connection:

Voltage Overall power Fuse

Water supply pressure:

Capacity:

Width 45 cm Height with worktop 85 cm Height without worktop 82 cm Max depth 63 cm Max depth with open door 118.5 cm

Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher’s door.

Minimum 50 kPa (0.5 bar) Maximum 800 kPa (8 bar)

9 place settings

This appliance complies with the following E.E.C. Directives:

- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Technical specifications

152955 17/0en 6-04-2005 8:53 Pagina 41

Page 42

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close

fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on

either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable

feet until the machine is perfectly level.

152955 17/0en 6-04-2005 8:53 Pagina 42

570-600

IN04

820

450

Page 43

Installation instructions

Water supply connections

This dishwasher must be plumbed into a cold water supply. For making the connection itself, the coupling nut fitted to the

machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The inlet hose must hang down vertically from the supply tap. The dishwasher features fill and drain hoses which can be turned

either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used with another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

152955 17/0en 6-04-2005 8:53 Pagina 43

Page 44

Installation instructions

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

- The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

- If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

- A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre.

- Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve.

152955 17/0en 6-04-2005 8:53 Pagina 44

Page 45

Installation instructions

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2. Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow

down the discharge of water. The sink plug must not be in place when the machine is draining as

this could cause the water to syphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres

and its internal diameter must be no smaller than the diameter of the hose provided.

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

152955 17/0en 6-04-2005 8:53 Pagina 45

Page 46

Installation instructions

Electrical connection

This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth Blue - Neutral Brown - Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1. Connect the Green and Yellow (earth) wire to the terminal in the

plug which is marked with the letter "E" or the earth symbol or coloured green and yellow.

2. Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3. Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

152955 17/0en 6-04-2005 8:53 Pagina 46

CE04

13A

Page 47

Installation instructions

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important! The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

Warning! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

152955 17/0en 6-04-2005 8:53 Pagina 47

Page 48

Hints for test centres

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart).

Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart).

Load: Rinse aid setting Detergent dosage:

Position 4 (type III) 5 g + 20 g (type B)

9 standard place settings

Arrangement

lower basket

Arrangement cutlery basket

Arrangement upper

basket without smaller

bowl and salad-bowl

Arrangement upper

basket with smaller bowl

and salad-bowl

Cup racks: position A

152955 17/0en 6-04-2005 8:53 Pagina 48

Page 49

152955 17/0en 6-04-2005 8:53 Pagina 49

Page 50

152955 17/0en 6-04-2005 8:53 Pagina 50

Page 51

152955 17/0en 6-04-2005 8:53 Pagina 51

Page 52

AEG Hausgeräte GmbH

Postfach 1036 D-90327 Nürnberg

152 955 17/0

From the Electrolux Group. The world’s No.1 choice.

The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.

Subject to change without notice

04/05

152955 17/0en 6-04-2005 8:53 Pagina 52

AEG-Electrolux F54750 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual