Page 1
WASHING MACHINE
INSTRUCTION BOOK
146 5632 00 - 02/05
EWT 1215 - EWT 1015
GB
Page 2
CONTENTS
FOR THE USER ...............................................3
Warnings..........................................................3
Usage .........................................................3
Precautions against frost ............................3
Scrapping ....................................................3
Protection of the environment .....................3
Washing machine description ...................... 4
The detergents dispenser ...........................4
The control panel ........................................4
How to do a wash ? 5
Loading the washing ...................................5
Proportioning of detergents ........................5
Choice of the required program ..................5
Choice of the temperature and spinning
speed ..........................................................5
Choice of the required option ......................5
«Prewash» pushbutton ................................5
«Quick wash» pushbutton ...........................5
«Silence Cycle» pushbutton ........................5
«Rinse plus» pushbutton ............................6
«Delayed start» pushbutton ........................6
Starting the program ...................................6
Action during a program .............................6
Adding washing ...........................................6
Modifying the current program.....................6
Cancelling the program ...............................6
End of program ...........................................6
FOR THE INSTALLER .................................. 13
Warnings ...................................................... 13
Technical characteristics ........................... 13
Installation ................................................... 14
Unpacking ................................................ 14
Position .................................................... 14
Moving your washing machine ................. 14
Leveling .................................................... 14
Water inlet ................................................ 14
Drain ........................................................ 15
Electrical connection ................................ 15
Programs table ...............................................7
Washing guide ...............................................8
Sorting and preparing your washing ............8
Washing load depending on the nature of the
material .......................................................8
Detergents and additives ............................8
International symbols for care of textiles .....9
Care and cleaning........................................ 10
Descaling the washing machine ...............10
The surface ...............................................10
The detergents dispenser .........................10
The drain filter ...........................................10
Operating problems .....................................11
Guarantee .....................................................12
After Sales Service .......................................12
2
Page 3
A. FOR THE USER
1. WARNINGS
Keep this user’s manual with your washing machine. If you sell your washing machine or give it away, make sure that it is
accompanied by its user’s manual. The new user can then be informed of how the washing machine operates and read relevant warnings.
These warnings have been written for your safety and for the safety of others. Please read these comments carefully before installing and using your washing machine. Thank you for your attention.
1.1. Usage
• When you receive your washing machine, unpack it or
have it unpacked immediately. Check its general
appearance. Make any reserves in writing on the delivery form and keep a copy.
• Your washing machine was designed for use by adults.
Make sure that children do not touch it or use it as a
toy.
• Do not modify or attempt to modify the characteristics
of this washing machine. This could be dangerous for
you.
• Your washing machine is intended for normal domestic
use. Do not use it for commercial or industrial purposes or for any purpose other than that for which it was
designed : to wash, to rinse and to spin.
• Unplug the power suplly plug and close the water supply tap every time after using your washing machine.
• Only wash articles that can resist machine washing.
Refer to the instructions on the label for each article.
• Do not wash underwear with bones, or any material
without hems, or torn materials in your washing
machine.
• Remember to remove all coins, safety pins, boraches,
screws, etc., before each wash. They can cause
serious damage if they are left in your washing.
• Do not put articles in your washing machine if you have
used a solvent, alcohol, trichloroethylene, etc., to
remove stains from them. If you must use these stain
removers, wait until the product has evaporated before
putting the articles in the drum.
• Collect all small articles such as socks, belts, etc., in a
small cloth bag or pillow case.
• Use the quantity of detergent indicated in the «proportioning of detergents» section.
• Always unplug the washing machine before cleaning it
and doing any maintenance.
• Switch the washing machine off by putting the program
selector to the «Off»
Off»* key.
• Unplug the washing machine.
• Screw in the water inlet pipe and install the drain pipe.
Water that remained in the pipes will then be evacuated,
thus preventing the formation of frost or ice that can damage your washing machine.
The next time you want to use your washing machine,
make sure that it is installed in a room in which the temperature is above 0°C.
*
position or pressing on the «On/
1.3. Scrapping
All materials marked with the symbol can be recycled.
Put them in a waste tip (ask for information from your municipal offices) so that they can be recovered and recycled.
When you take your washing machine to the tip, make sure
that everything that could be dangerous is out of service ;
cut the power supply cable flush with the surface of your
washing machine.
The symbol on the product or on its packaging indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of
this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
1.2. Precautions against frost
If your washing machine is exposed to temperatures below
0°C, take the following precautions :
• Close the tap and disconnect the water supply pipe.
• Put the end of this pipe and the drain pipe into a bowl
on the floor.
• Select the «Drain» programme and make sure it works
until it is complete.
1.4. Protection of the environment
We recommend that the following instructions should be
followed to achieve savings in water and energy and therefore to contribute to protection of the environment:
• If possible, use the washing machine at full capacity
rather than with partial loads (however, do not overload
the drum).
• Only use the Prewash or Soak function for very dirty
washing.
• Use a detergent dose adapted to the water hardness
(see «proportioning of detergents» section) and to the
amount of washing and how dirty it is.
*depending on model
3
Page 4
2. WASHING MACHINE DESCRIPTION
1
2
1 - Control panel
2 - Lid opening handle
3 - Leveling screws
4 - Filter door
5 - Lever for moving the washing machine
4
5
3
2.1. The detergents dispenser
Symbols
1 - prewash 3 - softener
2
1
3
2 - wash 4 - softener overflow (if overfilled)
4
(do not exceed the MAX mark)
2.2. The control panel
1 - Program selector 6 - «Silence cycle» pushbutton
2 - Temperature pushbutton 7 - «Rinse plus» pushbutton
3 - Spinning speed pushbutton 8 - «Delayed start» pushbutton
4 - «Prewash» pushbutton 9 - «Start/Pause» pushbutton
5 - «Quick wash» pushbutton 10 - Program and information display lights
Represented model : EWT 1215
2
3
4
5
1
6
8
7
9
10
4
Page 5
3. HOW TO DO A WASH ?
Before the first wash in your washing machine, we recommend that you should do a preliminary wash at
90°C with detergent but without any washing to clean
the tub.
3.1. Loading the washing
• Lift the machine cover.
• Open the drum by pressing on the locking button A;
the two flaps automatically separate.
• Insert the washing, close the drum and the cover of
your washing machine.
3.4. Choice of the temperature and
spin drying speed
The recommended temperature is displayed when you make the selection. You
can modulate the temperature using the
temperature pushbutton. When choosing
the washing temperature, take account of
the selected program (using the information given in the programs table) and comply with the temperature shown on the care
label for each article to be washed (see the
washing guide).
Warning : before you close
the cover of your washing
machine, make sure that the
drum door is properly closed:
• the two flaps latched
A
together,
• the locking button A extended.
3.2. Proportioning of detergents
Your washing machine was designed to reduce water
and detergent consumption, therefore reduce the doses recommended by detergent manufacturers.
Pour the powder detergent dose into the wash compartment and into the prewash compartment if
you chose the «prewash» option. Pour in the softener
into the compartment if you wish.
If you are using a different type of detergent, refer to the
«detergents and additives» section in the washing guide.
3.3. Choice of the required program
The maximum speed (corresponding to the
nature of the washing) will be displayed
when selecting the program, and in pause
mode. However, when you press the
"Spin" pushbutton you can reduce the
speed or choose the positions «rinse
hold»* or «no spin»* (drain only).
3.5. Choice of the required option
The various options should
be chosen after the program
has been displayed and before pressing the "start/pause" pushbutton.
Press the required pushbutton(s) ; the corresponding lights come on. When you press again, the lights go off.
When one of these options is not compatible with the
chosen program, the corresponding light will flash for a
few seconds and the "Err" message will appear in the
display window (see the programs table).
The programs table will tell you which is the appropriate
program for your washing type (see § 4).
Put the program selector
onto the required program;
the lights corresponding to
the phases making up the
program will light up.
The display window displays the probable duration
of the selected program
(ex: 1 hour and 10 minutes).
The display duration is
automatically readjusted
during the washing cycle.
3.5.1. «Prewash» pushbutton
The washing machine does a prewash at 30°C
maximum. The prewash finishes with a brief spinning
for cotton and synthetic programs, and by a draining for
delicates programs.
3.5.2. «Quick wash» pushbutton
If you select this function, the wash time is reduced
depending on which program you chose.
3.5.3. "Silence cycle" pushbutton
This option reduces the noise by your washing machine
while offering the same washing performances. Thus,
you can use your washing machine at night without
being inconvenienced by the noise. There is no spin
cycle and the last rinsing water is left in the machine to
prevent the washing from becoming creased if it is not
immediately removed from the drum.
*depending on model
5
Page 6
3.5.4. «Rinse plus» pushbutton
This option adds two rinses on Cotton, Synthetics and
Delicates programmes. It is advised for allergic people
to detergent products and in areas with fresh water.
3.5.5. «Delay start» pushbutton
This option delays start of the program for 1 to 23
hours. Select the number of hours after which you want
the program to begin by pressing on the pushbutton several times. This function is also valid to regulate the
soaking time (from 30 minutes to 10 hours).
If you choose the "rinse hold" position by pressing the
«silence cycle» pushbutton, the light* «rinse hold» in
the display is on and the «0» flashes in the display window. Before opening the lid, the water has to be drained. Turn the program selector knob to the "off"
position. Choose a draining, a spinning or a no spinning
programme and press the "START/PAUSE" pushbutton.
Turn the program selector knob to the "off" position.
Take out the washing. Pull out the power supply plug
and close the water supply tap.
3.6. Starting the program
After you chose the washing program, press
the "start/pause" pushbutton to start the cycle; the corresponding light comes on continuously.
It is normal that the program selector does
not turn during the cycle.
The current program light is on.
If you selected a delayed start, the
count-down will begin. The "Remaining
time" display window displays either the
program duration or the delayed start time.
3.7. Action during a program
3.7.1. Adding of laundry
Press the Start/Pause pushbutton : the corresponding
light flashes as long as the program is paused. You will
then hear a double "click" in the locking device when
the cover opens. Press the same pushbutton again to
resume the program.
For reasons of safety, you cannot open the cover if the
temperature of the washing water is too high.
Note: we recommend that you should leave the cover
and the drum open after use to air the washing drum.
3.7.2. Modifying the current program
Before modifying the current program, you must put the
washing machine to pause by pressing on the "START/
PAUSE" pushbutton. If it is impossible to make the modification, the display window indicates "Err" and the
corresponding light flashes for a few seconds. If you
decide to change the program in any case, you will
need to cancel the current program (see below).
3.7.3. Cancelling the programme
If you want to cancel a programme, turn the programme
selector knob to the «off» position of the programme
selector.
You can then select a new programme after cancelling
the previous one.
3.7.4. End of program
The washing machine stops automatically. "0" flashes
in the display window. You will hear a double "click" in
the locking device when the cover opens.
*depending on model
6
Page 7
4. PROGRAMS TABLE
Depending on the nature of textiles.
(
D
a
t
a
p
r
o
v
i
d
e
d
f
o
r
g
u
i
d
a
n
c
e
a
n
d
s
u
b
j
e
c
t
t
o
c
h
a
n
g
e
d
e
p
e
n
d
i
n
g
o
n
u
s
a
g
e
c
o
n
d
i
t
i
o
n
s
)
.
S
e
e
t
h
e
d
i
s
p
l
a
y
w
i
n
d
o
w
o
f
y
o
u
r
a
p
p
l
i
a
n
c
e
.
The following does not show all possibilities, but simply the most frequent settings.
Program
Washing type
White
White, for example bed
linen, table linen,
underwear, towels.
AA 40°
This program at 40° can
give the same washing
results as the 60° cotton
program, and is also suitable for synthetics.
Synthetics
Synthetic fabrics, underwear, color fabrics, noniron shirts, blouses.
DELICATES
For all delicate materials, for example curtains.
WOOL
Machine washable wool
marked «pure wool,
washable in machine,
non shrinking».
HANDWASH
Very delicate washing
marked «wash by hand».
FLASH 30
For only slightly dirty materials, except for wool.
Soaking
For very dirty materials
except for wool.
Rinses
Hand washed washing
may be rinsed with this
program.
**
Load Possible
options
5 kg Prewash
Quick wash
SILENCE CYCLE
Rinse plus
Delay start
4,5 kg
Prewash
SILENCE CYCLE
Rinse plus
Delay start
2,5 kg
Prewash
Quick wash
SILENCE CYCLE
2,5 kg 40 53 0,55
1,0 kg
1,0 kg
1,0 kg 30 40 0,15
Rinse plus
Delay start
SILENCE CYCLE
Delay start
Soak at 30°C, rinse hold, programme selector on OFF and
choose a spinning or a draining
before selecting the washing programme.
3 rinsings with liquid additive.
No Javel water.
Spin drying.
Tempera-
tures
°C liters kWh min
90
*
60
40 58 0,90
60 52 1,10
40 50 0,40
Ý 50 0,40
Approximate
consumptions
59
42
22 0,25
45 0,15
2,00
0,95
* Reference program for tests according to standard IEC 456 (60° Cotton prog.).
** Not possible with delayed start : the indicated time in the display window is the additionnal soa-
king time
.
7
Page 8
5. WASHING GUIDE
5.1. Sorting and preparing your
washing
5.3. Detergents and additives
Only use detergents and additives suitable for use in a
washing machine. Read the manufacturer's instructions and respect sections 2.1 and 3.2.
• Sort the washing by type and care symbol (see
chapter 5.4: International symbols for care of textiles): normal wash for strong washing that can
resist energetic wash and spin; delicate wash for
delicate washing that should be treated more carefully. For mixed loads composed of articles of different types of fibers, choose a program and
temperature suitable for the most fragile fiber.
• Wash white washing and color washing separately. Otherwise, the white washing may be colored
or look gray.
• New clothes very often have too much color. Preferably wash new clothes separately for the first time.
Respect "wash separately" and "wash several
times separately" care instructions.
• Empty pockets and spread out the washing.
• Take off all loose buttons, pins and hooks and eyes.
Close zip fasteners, tie knots in laces and straps.
• Turn clothes made of several layers of textiles (sleeping bags, anoraks, etc.), colored hosiery and wool
and textiles with add-on decorations, inside out.
• Wash small delicate items (socks, tights, bras, etc)
in a washing net.
• Treat curtains with special care. Remove curtain
hooks and put net curtains in a net bag or a sachet.
Powder detergents can be used without restriction; liquid detergents should be poured either in the proportioning bowl directly in the drum, or in the wash
compartment provided that the washing machine is
started immediately; detergents in tablets or doses
must be put into the wash compartment of the detergents dispenser in your washing machine.
The quantity of detergent to be used depends on the
amount of washing to be washed, the hardness of the
water and how dirty the washing is.
If the water is soft, you can reduce the doses slightly.
Increase the doses slightly if the water is hard (it is recommended to use a water softener) or if the washing
is very dirty or stained.
You can ask the water distribution company in your region or any other competent authority to find out the degree of hardness of your water.
5.2. Washing load depending on the
nature of the material
The quantity of washing that you put in your drum must
not exceed the maximum capacity of your washing machine. This capacity may vary depending on the nature
of your textiles. Reduce the quantity of washing if it is
very dirty or if you have terry cloth type materials.
Not all textiles have the same volume and the same water retention capacity. This is why in general the drum
should be filled:
• completely, but without excessive pressure for cotton and linen, and for mixed washe,
• half full for treated cottons and synthetic fibers,
• about one third full for very delicate articles such as
net curtains and wool.
For a mixed wash, fill the drum as required for the most
delicate material.
8
Page 9
5.4. International symbols for care of textiles
NORMAL
WASH
Wash at
95°C
DELICATE
WASH
JAVEL WATER
IRONING High temperature
Bleaching with chlorine (Javel water) allowed
(only cold and with a dilute solution)
(max 200°C)
Wash at
60°C
Average temperature
(max 150°C)
Wash at
40°C
Wash at
30°C Delicate
wash by
hand
Do not bleach with chlorine (Javel water)
Low temperature
(max 100°C)
Do not wash
Do not iron
DRY
CLEANING
DRYING Dry washing
Dry cleaning
(all usual solvents)
spread out
Dry cleaning
(all solvents except
trichloroethylene)
Dry washing
hung up
(only oil solvents
Dry washing
on hanger
Dry cleaning
and R113)
High
temperature
Moderate
Temperature
Drying in drum
allowed
Do not dry clean
Do not dry
in drum
9
Page 10
6. CARE AND CLEANING
6.4. The drain filter
Do not do any cleaning operation until you have
unplugged the washing machine.
6.1. Descaling the washing machine
Normally there is no need to descale the washing machine if the detergent was correctly proportioned.
If descaling is necessary, use a special non-corrosive
product specially designed for washing machines that
you can find in the shops. Respect the proportion and
frequency of descaling shown on your packaging.
6.2. The surface
Clean the surface of your washing machine using lukewarm water and a mild detergent. Never use alcohol, solvents or similar products.
6.3. The detergents dispenser
From time to time, you must clean the detergents dispenser in order to eliminate the possible wastes of the
detergents and then to avoid an operating problem.
The detergent dispenser is very easy to remove for a light cleaning.
Clean the filter at the bottom of the washing machine
regularly. The "filter"
cked. In this case clean it immediately. If you wash
washing that is very fluffy, clean it after each wash.
• Open the door, with a screwdriver for example:
• Drain residual water:
*
light comes on if the filter is blo-
Put a receptacle under the
drain. Turn the cap in the anticlockwise direction until it is
vertical to release residual water.
Disassembly:
Reassembly :
Press the clips on each side of
the detergents dispenser and
pull it upwards.
You can thus clean it using
running water and a brush or a
twisted cloth. Check that the
siphons at the back of the detergents dispenser are not
blocked.
Put the detergents dispenser in
the notches until they lock.
• Remove the filter:
Unscrew the cap all the way
and take it off. Clean it thoroughly with running water.
Put the assembly back and
screw it in the clockwise direction.
After cleaning the filter, you are required to closed the
door. In fact, for reasons of safety, the door must be
closed when the appliance is working.
*depending on model
10
Page 11
7. OPERATING PROBLEMS
Many checks have been carried out during the manufacture of your washing machine. However, if you face a problem
with its operation, please read the following sections before calling the After Sales service.
Symptom Cause
The washing machine will not start or will not fill: • the washing machine is not correctly connected, the elec-
trical installation is not working,
• the cover of your washing machine and the drum flaps are
not correctly closed,
• you did not control the program start correctly,
• there is a power failure,
• the water supply is closed off,
• the water tap is closed,
• the water inlet is blocked.
The washing machine fills up but empties again
immediately:
The washing machine will not spin or will not
empty:
There is water on the floor around the washing
machine:
Washing results are not satisfactory: • the detergent is not suitable for machine washing,
The machine is vibrating or noisy: • not all the packing was removed from the machine (see
• the drain siphon is attached too low (see installation section).
• the drain pipe is blocked or kinked,
• the drain filter is blocked,
• the anti-unbalance mass safety device has tripped; bad
distribution of washing in the drum,
• the «Drain» program or the «Rinse hold» option is selected,
• the height of the drain siphon is wrong.
• excess detergent has made too much foam that overflowed,
• the detergent is not suitable for washing machine,
• the drain siphon is not hooked on properly,
• the drain filter was not put back into place,
• the water inlet pipe is leaking.
• there is too much washing in the drum,
• the washing program is not appropriate,
• there is not enough detergent.
unpacking section),
• the washing machine is not leveled and properly packed,
• the washing machine is too close to the wall or furniture,
• the washing is not well distributed in the drum,
• the load is not sufficient.
The washing cycle is much too long : • the water inlet is blocked,
• there was a power supply failure or the water was cut off,
• the motor temperature safety device tripped,
• the water inlet temperature is lower than normal,
• the foam detection safety system tripped (too much detergent) and the washing machine evacuated the foam,
• the anti-unbalance mass safety device tripped, an additional phase was added to distribute the washing in the drum
better.
The washing machine stops during a washing cycle :
The cover does not open during the cycle : • the lid light is off.
• the water or electricity supply is defective,
• a rinse hold was programmed.
• the flaps of the drum door are opened
11
Page 12
Symptom Cause
The «
DRUM POSITIONNING» light is not on at the
end of the cycle:
• the drum could not reach the right position due to a persistent unbalanced mass; turn the drum manually.
Error code
dow and the last light for the program light up
Error code
dow and the last light for the program light up* :
Error code
dow and the last light for the program light up* :
Error code EA0
dow and the led END* flashes 10 times
The «filter» light comes on : • the drain filter is blocked.
Softener or Javel water flows through the overflow orifice when filling :
* Eliminate the causes of the failure if you find them, and then press on the «start/pause» pusbutton to restart the
interrupted program.
**Depending on the model.
***depending on the model, some accoustic signals may be actived.
E40 is displayed in the display win-
E20 is displayed in the display win-
E10 is displayed in the display win-
**
is displayed in the display win-
***
• the cover is not correctly closed.
*
:
• the drain filter is blocked,
• the drain pipe is blocked or kinked,
• the drain pipe is too high (see «installation»),
• the drain pump is blocked,
• the installation siphon is blocked.
• the water tap is closed,
• the water network has been cut off.
• The flaps of the drum door are opened.
• you did not put in the right amount,
• the siphons at the back of the detergents dispenser are
blocked.
8. GUARANTEE
Depending to the Sales Company.
9. AFTER SALES SERVICE
If you have an operating problem, refer to the "Operating problems" section. If any work is necessary after you have
made all your checks, your washing machine dealer is the first person authorized to take action. Otherwise, you can
always call Consumers Help that will inform you of the address of an After Sales Service.
When you call the After Sales Service, mention the model and product number of your washing machine, and its serial
number. This information is given on the inside of the filter door and on the data plate at the back of the washing
machine.
If any work is done on your washing machine, insist that your After Sales Service uses manufacturer certified spare
parts.
12
Page 13
B. FOR THE INSTALLER
1. WARNINGS
• Please read the instructions in the "electrical connec-
• This washing machine is heavy. Take care when
moving it.
• You must remove the packing on the washing machine
before use. Failure to remove all transport protection
devices can cause damage to the washing machine or
nearby furniture. The washing machine must be
unplugged while packing is being removed.
• Do not allow any one other than a qualified plumber to
make the hydraulic connections necessary to install
your washing machine.
• The washing machine must be plugged in to a power
outlet with a conform earth.
• Call a qualified electrician if the electrical installation in
your residence is such that you have to modify it before
you can connect your washing machine.
2. TECHNICAL CHARACTERISTICS
• After installing your washing machine, make sure that
• When your machine is installed on a carpeted floor,
• The power supply cable may be only replaced by the
• Your manufacturer cannot be held responsible for any
tions" chapter carefully before connecting your
washing machine.
it is not standing on its electrical power supply cable.
make sure that the carpet does not close off the ventilation openings near the bottom of the machine.
After Sales Service.
damage resulting from a nonconform installation.
DIMENSIONS Height
Width
Depth
VOLTAGE / FREQUENCY
TOTAL POWER
WATER PRESSURE
Connection to the water network
This washing machine complies with CEE directive 89-336 about the limitation of radioelectric disturbances
and directive CEE 73-23 for electrical safety.
Minimum
Maximum
850 mm
400 mm
600 mm
230 V / 50 Hz
2300 W
0,05 MPa (0,5 bar)
0,8 MPa (8 bars)
Type 20x27
13
Page 14
3. INSTALLATION
3.1. Unpacking
Packing used to protect internal parts of
the washing machine during transport
must be removed before the washing
machine is put into service for the first time.
Remove all packing from the
washing machine. Tilt the
washing machine sideways and
then remove the packing under
the motor, and straighten the
washing machine.
If you want to keep your
washing machine aligned with
the adjacent furniture, you can
cut the pipe support strip at the
back of your washing machine.
Leave the two side closers in
place.
3.2. Position
Put the washing machine on a flat hard floor in a well
ventilated room.
Make sure that your washing machine does not touch
the wall or any other furniture in the room.
3.3. Moving your washing machine
Tilt the washing machine backwards, rotate it by a quarter of a
turn on one of its corner to remove the transport base.
Open the washing machine lid
and remove the immobilization
packing and plastic films.
Close the lid.
Use a 10 mm spanner to remove the two screws and spacers
at the back.
You can now see the openings
that must be closed with the caches in the pack attached to the
washing machine; do not forget
to fold down the central capsule.
If you want to move your
washing machine, lift it onto its
rollers by pulling the lever at the
bottom of the washing machine
all the way to the left. When you
have put your washing machine
into the required location, put
the lever back into its initial
position.
3.4. Leveling
Precise leveling will prevent vibrations, noise and movements of the washing machine during operation.
Make the washing machine level by adjusting the leveling
screw that is too short.
Unscrew the stand and locking
collar assembly (lift the
washing machine if necessary).
When the washing machine is
stable, maintain the stand on
the ground and turn the locking
collar as far as posible.
Make sure that you have removed all these parts from your
washing machine and keep
them so that you can use them
again if you need them for future
transport.
3.5. Water inlet
Screw the supply ppe connector onto the water inlet tap
(20x27 mm), remembering to
use the washer provided with
the washing machine.
Open the water inlet tap.
14
Page 15
You cannot prolong the water inlet pipe. If it is too short,
buy a longer pipe provided for this purpose.
3.6. Drain
The drain siphon must be placed inside a drain pipe (or in a
washbasin) at a height of
between 70 and 100 cm. Make
sure that it cannot fall.
• Important: the drain pipe must never be prolonged.
If it is too short, call a professional.
3.7. Electrical connection
You can only connect this washing machine to 230 V
single phase power supply.
Check rating of the fuse line: 10 A at 230V.
The washing machine must not be connected through
an extension cable or a power bar.
Check that the earthing connection is conform with the
regulations in force.
15
Page 16
The Electrolux Group. The world’s No.1 Choice.
The Electrolux Group is the world largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such
as refrigerators, cookers, washing machines, vaccum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than
150 countries around the world.
Loading...