Freezer/Gefrier /Congélateur / Vries
INSTRUCTION BOOK
GEBRAUCHSANWEISUNG
NOTICE D’UTILISATION
GEBRUIKSAANWIJZING
818 37 12--00/2
GB
DE
EUC3403
FR
NL
Safety instructions
Carefully read these instructions to learn how the appliance works and how to care for it. Keep the instruction booklet. It
will come in handy if you later sell t he cabinet or give it to somebody else.
These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or
using the appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or warnings
contact the Customer Care Department.
For the User
· The cabinet is intended for keeping foodstuff in a
normal household as explai ned in this instruction
booklet.
· Do not keep explosive gases or liquids in the
refrigerator or freezer compartment. They may
explode and cause injury and material damage.
· Do not let sharp objects come into contact with
the refrigerating system on the back of and inside
the cabinet. If the refrigerating system is
punctured, the cabinet will be damaged and
foodstuff inside may spoil.
· Do not keep carbonised drinks or bottles in the
freezer compartment. The glass bottles may
break.
· The cabinet is heavy. The edges and proj ecting
parts of the cabinet may be sharp. Be careful
when moving the cabinet and always use gloves.
Child Safety
· Pay attention so that small children do not gain
access to the operating controls or the inside of
the cabinet.
Scrapping old cabinets
When discarding the cabinet, hand it over to a recycling
station. For more information, call your local c ity office
or your dealer.
GB
Contents
Safety instructions 2.................
Scrapping old cabinets 2.......................
Contents 2..........................
Description of the Appliance 3........
Control Panel 3..............................
Before use 3.........................
Using the freezer 3...................
To start the freezer and set the correct temperature 3
Adjustning the thermometer display 4............
Switching off 4..............................
Temperature inside the freezer 4................
Alarms and other features 5....................
Freezing 5..................................
Suitable storage periods 6......................
Cabinet interior 6............................
Thawing 6..................................
Hints and Tips 7.....................
Saving energy 7.............................
GB
Food Storage 7..............................
Protect the environment 7......................
Maintenance and Cleaning 8..........
Removing the ventilation grille 8................
Cleaning 8..................................
Defrosting the freezer 8.......................
To change t he li ght bulb 9.....................
When the appliance is not in use 9...............
Something Not Working 9............
DECLARA TION OF GUARANTEE TERMS. 10....
Technical specification 11.............
Installation 12........................
Mains Cable 12...............................
Unpacking 12................................
Remove the transport supports 12................
Cleaning 12..................................
Installing the cabinet 13........................
Door Reversal 14.............................
Electrical connection 14........................
Electrolux 818 37 12-00/2
2
Description of the Appliance
GB
2
2
1
3
3
3
3
3
3
4
Control Panel
Model EUC3403
1. Freezing tray + accumulator
2. Freezershelf with flap
3. Freezer basket
4. Ventilation grill
18
--
ACTIONFREEZE
BC
A
A. Freezer power switch
Switches the freezer on and off.
B. Green indicator lamp
Lights when the freezer is operating.
Temperature display
Shows the highest temperature inside the freezer.
C. Temperature adjustment button/thermostat
Used to set the temperature in the freezer .
CD
Before use
Position and clean the cabinet as explained in the section
"Installation".
Using the freezer
E
D. FAST FREEZE button
Used to switch the Fast Freeze feature on and off.
Yellow indicator lamp
Lights when Fast Freeze is operating.
E. Alarm shut-off button
Used to turn the audible alarm off.
Red warning lamp
Flashes when one of the alarms i n t he cabinet has
been triggered.
GB
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
GB
To start the freezer and set the
correct temperature
Switching on:
Switch on the freezer by pressing the power switch.
The alarm sounds if the temperature inside
freezer reaches room temperature. Turn off the
by pressing the switch-off
button.
the
alarm
18
--
ACTIONFREEZE
20
--
ACTIONFREEZE
Electrolux 818 37 12-00/2
3
Setting the temperature
Press the buttons until the desired temperature blinks
on the temperature display. (The temperature can be
set between -15°C and -24°C.)
"+" increases the temperature.
"-" decreases the temperature.
Once set, the temperature display shows the current
temperature inside the freezer.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.
It is not necessary to reset the temperature when the
cabinet is switched on after it has been out of use.
The thermostat recalls the previously set
temperature.
Adjustning the thermometer
display
On delivery, the cabinet's thermometer is set to show
the average temperature during normal operation
conditions. If the cabinet is used during other
operational conditions, for example, in warmer
surroundings, with a lot of food or if the cabinet is
run entirely or partially without accessories the
thermometer display can be adjusted for these
conditions.
When adjusting the thermometer display, the cabinet
should be working and freezing should not be active.
Press the shut down button for the Setting the
temperature "+" and t he "-" button simultaneously
and hold t hem down for about 5 seconds. As
confirmation, the sound will buzz with a short
signal. The thermometer is now set for display of
warmer food products. To return to normal display,
repeat the same process. As confirmation, the buzzer
will give off a loud signal.
Information: It is very important to press the
buttons at exactly the same time.
Please observe that the display will not change
immediately. Instead, the temperature of the cabinet
will successively change internally.
18
--
ACTIONFREEZE
18
--
ACTIONFREEZE
Switching off
Switch off the cabinet by pressing the power switch.
Keep the button pressed for approx. 1 second.
Power to the cabinet is completely
18
--
ACTIONFREEZE
interrupted only when the power plug is
disconnected.
Temperature inside the freezer
To ensure that foodstuff will keep for a long time, be sure that the temperature inside the freezer is -18°C or
below. Please note, however, that the energy consumption increases as the temperature decreases.
The built-in temperature display shows the warmest temperature inside the freezer. If the temperature is
measured using a thermometer, put it between the products since this will reflect the real temperature in the
frozen products. It is normal that the built-in temperature display shows a temperature slightly above that
measured in other ways.
Electrolux 818 37 12-00/2
4
Alarms and other features
Door open alarm
If the door remains open for more than about 1,5
minute, the red indicator lamp starts flashing and an
audible alarm sounds.
To switch off the alarm:
Press the alarm shut-off button. As long as the door
remains open, the audible alarm will sound anew at
1-minute intervals. The red i ndicator lamp goes out
when the door is closed.
Temperature alarm
If the temperature rises above -12°C, the red warning
lamp flashes and an audible alarm sounds. The
temperature display will then start to flash.
To switch off the alarm:
Press the alarm shut-off button to switch off the
audible alarm. The temperature display will stop
flashing.
The red warning lamp goes out when the
temperature inside the freezer again falls below
-11°C.
Find out what caused the alarm. See the chapter
"Something not working".
Temperature memory
The temperature memory shows when an alarm has
been triggered in the cabinet.
The temperature memory operates as follows:
When the temperature inside the freezer again falls
below -11°C the audible alarm stops. The
temperature display and the red warning lamp will
flash to indicate than an alarm was triggered. When
the alarm shut-off button is pressed, the display then
displays the warmest temperature inside the cabinet
during the alarm phase and the display stops
flashing. By referring to the temperature display
indication, it is possible to decide whether or not to
discard the products inside the freezer .
Atabout-12°C:
Most food products can be immediately
re-frozen. Ice cream is especially sensitive to
temperature changes and should be consumed
as soon as possible.
At -9° - -2°C:
Food products should be prepared (cooked)
prior to eating or re-freezing them.
18
--
ACTIONFREEZE
11
--
ACTIONFREEZE
18
--
ACTIONFREEZE
However, always check the quality of the food
yourself to determine if it can be frozen or if it must
be discarded.
Freezing
Press the fast freeze button approx. 24 hours prior to
placing the food in the freezer.
You need not press the fast-freeze button when
freezing smaller quantities of food during any
24-hour period.
Fast freeze is automatically switched off apporox 50
hours after the button has been pressed.
Electrolux 818 37 12-00/2
5
Fast freeze can be discontinued by pressing the fast
freeze button once again.
The yellow fast freeze lamp remains lit as long as
the fast freeze button is engaged.
"A" (ACTION FREEZE) is displayed in
temperature display
.
the
Practical advice on freezing
· When freezing products, use the top shelf, and if
necessary the shelf beneath as this is the coldest
part.
· When freezing large amounts of food/provisions,
the accumulator moves to the tray/space nearest
to the lower freezing shelf.
- Place the foods directly on the freezer shelves.
· Spread out the products as much as possible to
allow air to circulate between them.
· Do not place food products which are to be
frozen directly against other frozen food.
The heat from the unfrozen food may cause
the frozen food to thaw on the surface.
· Once frozen, re-arrange the products and put
them as close as possible to each other.
The food will then stay cold longer i n t he
event of a power failure.
· Do not freeze too much food at the same time.
The freezing capacity of the unit is indicated in
the specifications section.
A
ACTIONFREEZE
Check that the cabinet is operating and
keeps the set temperature one day after
switching it on for the first time. Only
after then should the freezer be used to
freeze fresh foodstuff.
Suitable storage periods
Food purchased in frozen condition: Follow the
advice on the maximum storage period indicated on
the packaging.
Fresh food frozen at home:
Fatty and salty food should not be kept frozen for
more than three months. Cooked food and low-fat
food may be kept up to about six months. Lean food
and berries can be kept for approximately one year.
Cabinet interior
Freezer drawers
The freezer drawers make it possible to quickly and
easily find the food package you want. To gain
space, the drawers can be removed and the products
can be put directly on the shelves. On all shelves,
except the top shelf, it is possible to place products
that protrude 20 mm from the front edge. This
allows maximum use of the available space.
Do not remove the bottom drawer. It is required to
assure proper air circulation.
Freezer tray
Use the freezer tray to freeze berries and vegetables.
After about 4 hours the food will be thoroughly
frozen and can then be packaged normally. Food
that is frozen in this way will not stick together,
enabling you to use only the amount required.
Thawing
It is best to thaw foods in refrigerator. Pl ace the
foodstuff on a plate with a raised edge to prevent
liquids from running out. To quickly thaw food,
place it in room temperature or in cold water. When
using a microwave oven to thaw foodstuff, follow
the manufacturer's instructions.
Electrolux 818 37 12-00/2
6
Ice cubes
Fill the ice tray to max. 3/4 since water expands as it
freezes. Release the ice cubes by twisting the ice
tray.
If ice cubes are kept for a long time, they will dry
out and the taste is affected. Thus, throw away old
ice cubes and prepare new ones when needed.
Cold accumulator
The cold accumulator will keep the food cold for
longer after a power failure. The cold accumulator
will be most effective when placed at the front of the
fast-freezing tray. When freezing large amounts of
food/provisions, the accumulator moves to the
tray/space nearest to the lower freezing shelf.
When defrosting:
Place the cold accumulator on top of the frozen food
to keep it cold.
Hints and Tips
Saving energy
· Pay careful attention to where the cabinet is
placed. See the section "Installation". When
installed correctly, the cabinet will consume less
energy.
· Try to avoid keeping the door open for long
periods, or opening the door too frequently as
warm air will enter the cabinet, and cause the
compressor to switch on unnecessarily often.
· Ensure there are no obstructions preventing the
door from closing properly.
· Thaw frozen food in the fridge. This will ensure
safer defrosting of foods and reduce the work of
the refrigeration unit
· It is advisable to periodically clean the
refrigeration system at the back of the appliance
with a duster or vacuum cleaner.
· Food which is to be frozen (when cool) should
be placed in the fridge before being transfered to
the freezer.
· Avoid unnecessary frosting in the cabinet by
packing all foodstuffs into airtight packages
before placing them in the freezer.
· Carefully follow the advice on freezing products
in the section "Using the freezer". This will
prevent wasting energy.
· Do not set the temperature too low in the freezer.
A suitable temperature is in the range of -18°C
to -20°C .
· Defrost the freezer when the frost layer reaches a
thickness of 3-5 mm.
· Make sure the door gasket is complete and
always clean.
GB
evaporate, should be placed in the larder
compartment.
· Avoid buying frozen food if you can not store it
straight away. The use of an insulated container is
advisable. When you arrive home place the
frozen food in the freezer immediately.
· Ensure that food placed in the freezer is dated and
labelled and used in date order to ensure that food
is consumed at its best.
Remove suspect food from you refrigerator and
clean, refer to cleaning and maintenance.
Protect the environment
· Hand over the cabinet packaging and discarded
fridges and freezers to a recycling station.
Contact your local council or Environmental
Health office for more information.
· Keep foodstuff in re-usable containers. Cut down
on disposable material as much as possible.
· When cleaning the cabinet, use a mild
washing-up detergent.
· Follow the advice in the section "Saving energy"
· The door gasket and coolant used in this
cabinet will not harm the ozone layer.
· All parts in the packaging can be recycled.
· The cabinet has been designed for easy
dismantling and subsequent recycling.
Food Storage
· To obtain the best results from your appliance,
neither hot foods nor liquids which may
Electrolux 818 37 12-00/2
7
Maintenance and Cleaning
Removing the ventilation grille
The ventilation grille can be removed, e.g. to wash
the grille.
Make sure the door is open when removing the
ventilation grille. Unsnap the upper edge of the grille
by pulling outward/downward. Then pull the grille
straight out to completely remove it.
Cleaning
Clean the cabinet at regular intervals.
Don't use detergents, abrasive powders,
high perfumed cleaning products, wax
polishes or cleaning products
containing bleach or alcohol when
cleaning the product
Disconnect the appliance from electricity supply.
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0,5 litre water)
Rinse and dry thoroughly.
Regularly check the door seals and wipe clean to
ensure they are clean and free from debris.
Wash the outer cabinet with warm soapy water.
Remove the ventilation grille (see the section
"Removing the ventilation grille") and vacuum-clean
under the cabinet. Once or twice a year dust the
condenser (black grille) and the compressor at the
back of the appliance, with a brush or vacuum
cleaner, as an accumulation of dust will affect the
performance of the appliance and cause excessive
electricity consumption.
When moving the cabinet, lift it by
the front edge to avoid scratching the
floor.
GB
Defrosting the freezer
A certain amount of frost will always form on the
freezer shelves and around the top compartment.
Defrost the freezer when the frost layer reaches a
thickness of about 3-5 mm.
Remove the freezer drawers and place them on top
of each other by turning every other drawer one half
turn. Put insulating material around the drawers, e.g.
blankets or newspapers.
The frozen products can also be packed closely
together and be kept in a cold location, e.g. in the
fridge.
Defrosting can be accelerated by placing bowls with
hot water (not boiling) inside the freezer.
Electrolux 818 37 12-00/2
8
Loosen the drainage channel from its resting
position and push in according to the illustration and
place it in the bottom freezer drawer where water can
collect.
Carefully scrape off the ice when it starts to thaw.
Use a wood or plastic scraper. Do not use sharp
objects as these may damage the interior.
When all the ice has melted, clean and wipe the
cabinet dry, then put the drainage channel back in
place.
Switch on the cabinet and replace the frozen
foodstuff.
To change the light bulb
The light is switched on automatically when the
door is opened. Before replacing the light bulb,
disconnect the power plug from t he outlet.
Press the spring together and pull the grille
downward at the same time.
Use a bulb of the same type, E14 socket, maximum
ratingof25W.
When the appliance is not in use
Disconnect the appliance from electricity supply.
Empty all foods and clean the appliance, leaving the
doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to
check it once in a while to prevent the food inside
from spoiling in case of a power failure.
Never use a hair drier or other heating
appliances to speed up defrosting. Excessive
heat may damage the plastic interior, and
humidity could enter the electric appliance
making it live.
Something Not Working
Before contacting your local Service Force Centre check the following point:
Problem Possible cause / Remedy
"" is displayed in the temperature
display.
Or
The yellow Action Freeze and red
warning lamp both flash.
Audible alarm + flashing red warning
lamp. (It is too warm inside the freezer.)
It is too warm inside the freezer. Set a lower temperature.
An error has occurred in measuring the temperature. Call your
service representative. (The cooling system will continue to
keep food products cold, but temperature adjustment will not
be possible.)
Switch off the audible alarm by pressing the alarm off button.
The audible alarm could have been triggered by:
The cabinet having been recently switched on and the
temperature still being too high. See the chapter "Switching on
and setting the temperature".
The door may have been open for so long that the `door open'
alarm was triggered.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
If warm food products have been put inside the freezer, wait for
a couple of hours and then check the temperature again.
Distribute the food products to allow cold air to circulate
around them.
GB
Electrolux 818 37 12-00/2
9
It is too cold inside the freezer. Set a warmer temperature.
Action Freeze could have been switched on.
The temperature display shows the highest temperature inside
the cabinet. Thus a difference between the temperature
indicated on the display and the (average) temperature
measured in another way is normal.
Too much frost and ice are produced. Make sure that the door is completely closed and that the
insulating strip is complete and clean.
The compressor operates continuously. Set a warmer temperature.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
The temperature where the cabinet is placed is above normal
room temperature.
The cabinet does not operate at all.
Cooling or interior light does not
operate. No indicator lamps light.
Power failure Do not unnecessarily open the cabinet, except when the power
Sound level in cabinet is too high. The refrigerating system will always produce some sounds. A
The cabinet is not switched on.
Power does not reach the cabinet. (Try connecting another
electrical device to the power outlet.)
The fuse has blown.
The power plug is not properly connected.
cut seems to be long, in which case the food products should be
moved to another cabinet that works. If the frozen products are
still hard following the power cut, they may be immediately
refrozen. If the food products have thawed but are still fresh,
they may be used, however they should be prepared before
re-freezing or eating them.
pulsing sound is heard when coolant i s pumped inside the
cooling pipes. A ticking sound from the thermostat can be
heard when the compressor switches on and off. The sound
level varies depending on the operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the cabinet not touch each
other. Carefully bend them if they do.
If the cushion spacers (between the cabinet wall and pipes)
come loose, put them back in place again.
Carefully follow the instructions in the chapter "Installing the
cabinet".
DECLARATION OF GUARANTEE
TERMS.
Our appliances are produced with the greatest of
care. However, a defect may still occur. Our
consumer services department will repair this upon
request, either during or after the guarantee period.
The service life of the appliance will not, however,
be reduced as a result.
This declaration of guarantee terms is based on
European Union Directive 99/44/EC and the
provisions of the Civil Code. The statutory rights
that the consumer has under this legislation are not
affected by this declaration of guarantee terms.
This declaration does not affect the vendor's
statutory warranty to the end user. The appliance is
guaranteed within the context of and in adherence
with the following terms:
1. In accordance with provisions laid down in
paragraphs 2 to 15, we will remedy free of charge
any defect that occurs within 24 months from the
date the appliance is delivered to the first end user.
These guarantee terms do not apply in the event of
use for professional or equivalent purposes.
2. Performing the guarantee means that the appliance
is returned to the condition it was in before the
defect occurred. Defective parts are replaced or
repaired. Parts replaced free of charge become our
property.
3. So as to avoid more severe damage, the defect
must be brought to our attention immediately.
Electrolux 818 37 12-00/2
10
4. Applying the guarantee is subject to the consumer
providing proof of purchase showing the purchase
and/or delivery date.
5. The guarantee will not apply if damage caused to
delicate parts, such as glass (vitreous ceramic),
synthetic materials and rubber, is the result of
inappropriate use.
6. The guarantee cannot be called on for minor faults
that do not affect the value or the overall reliability
of the appliance.
7. The statutory warranty does not apply when
defects are caused by:
· a chemical or electrochemical reaction caused by
water,
· abnormal environmental conditions in general,
· unsuitable operating conditions,
· contact with harsh substances.
8. The guarantee does not apply to defects due to
transport which have occurred outside of our
responsibility. Nor will the guarantee cover those
caused by inadequate installation or assembly, lack
of maintenance or failure to respect the assembly
instructions or directions for use.
9. Defects that result from repairs or measures
carried out by people who are not qualified or expert
or defects that result from t he addition of
non-original accessories or spare parts are not
covered by the guarantee.
10. Appliances that are easy to transport may be
delivered or sent to the consumer services
department. Home repairs are only anticipated for
bulky appliances or built-in appliances.
11. If the appliances are built-in, built-under, fixed or
suspended in such a way that removing and
replacing them in the place where they are fitted
takes more than half an hour, the costs that result
therefrom will be charged for. Connected damage
caused by these removal and replacement operations
will be the responsibility of the user.
12. If, during the guarantee period, repairing the
same defect repeatedly is not conclusive, or if the
repair costs are considered disproportionate, in
agreement with the consumer, the defective
appliance may be replaced with another appliance of
thesamevalue.
In this event, we reserve the right to ask for a
financial contribution calculated according to the
length of time it has been used.
13. A repair under guarantee does not mean that the
normal guarantee period will be extended nor that a
new guarantee period begins.
14. We give a twelve month guarantee for repairs,
limited to the same defect.
15. Except in the event where liability is legally
imposed, this declaration of guarantee terms
excludes any compensation for damage outside the
appliance for which the consumer wishes to assert
his rights. In the event of legally admitted liability,
compensation will not exceed the purchase price
paid for the appliance.
These guarantee terms are only valid for appliances
purchased and used in Belgium. For exported
appliances, the user must first make sure that they
satisfy the technical conditions (e.g.: voltage,
frequency, installation instructions, type of gas, etc.)
for the country concerned and that they can
withstand the local climatic and environmental
conditions. For appliances purchased abroad, the
user must first ensure that they meet the
qualifications required in Belgium. Non-essential or
requested adjustments are not covered by the
guarantee and are not possible in all cases.
Our consumer services department is always at your
disposal, even after the guarantee period has expired.
Address for our consumer services department:
ELECTROLUX HOME PRODUCTS
BELGIUM
Bergensesteenweg, 719 - 1502 LEMBEEK
Tel. 02.3630444
Technical specification
Model EUC3403
Vol um e 300 l
Width 660 mm
Height 1800 mm
Depth 680 mm
Energy consumption 306 kWh/year
Energy class A+
Rated power 120 W
Freezing capacity 30 kg/24 hours
11
GB
Electrolux 818 37 12-00/2
Installation
Mains Cable
Do not remove the power cord by pulling on its
lead, particulary when the product is being
pulled out of its niche.
· Damage to the cord may cause a short-circuit, fire
and/or electric shock.
· In the event of damage to the appliance's main
cable, only an authorised service company
recommended by the manufacturer or a similarly
qualified person may adjust it in order to avoid
shock hazard for the user.
Unpacking
Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling. For more information,
contact your local city office or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
GB
Remove the transport supports
Remove the transport supports placed along the door
sides.
Some models are fitted with a silencing pad under
the cabinet. Do not remove this pad.
Installation of distance
Assemble the attached distance on the back side of
the panel according to the illustration.
Cleaning
Wash the inside of the cabinet using lukewarm
water, a mild washing-up detergent and a soft cloth.
12
Electrolux 818 37 12-00/2
Installing the cabinet
)b)
When two appliances are placed beside each other,
the distances enclosed in the plastic wrapping should
be glued between the appliances. As shown in the
illustration.
Make sure that the power plug is not squashed or
damaged by back of the product.
· A damaged power plug may overheat and cause a
fire.
Do not place heavy articles or the product itself on
the power cord.
· there is a risk of a short circuit and fire.
If the power plug socket is loose, do not insert the
power plug.
· there is a risk of electric shock or fire.
To obtain the best performance from the cabinet,
ensure :
· the cabinet is placed in a dry, cool place and
is not exposed to direct sunlight.
· the cabinet is not placed close to a source of
heat, e.g. a cooker or dishwasher.
· the cabinet is level. The cabinet should not lean
against any wall. If necessary adjust the
feet using the adjustment spanner supplied.
· there is good air circulation around the cabinet
and that the air channels below and behind
the cabinet are not blocked. The ventilation
space above the cabinet must be at least 4 cm.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cupboard. In this case,
the space behind the cupboard must be at least
50 mm deep.
Cabinet is placed at a location whose ambient
temperature corresponds to the climate
classification*, for which the appliance is designed.
* See on the rating plate on the inside of the
appliance.
The following table shows which ambient
temperature is correct for each climate classification.
Climate
classification
SN
for an ambient temperature of
+10°C to +32°C
a
50mm
N
ST
T
+16°C to +32°C
+18°C to +38°C
+18°C to +43°C
If the cabinet is placed in a corner and the side with
the hinges facing the wall, the distance between the
wall and the cabinet must be at least 16 mm to allow
the door to open enough so that the shelves can be
removed.
The power plug must be accessible after installation
of the cabinet.
Electrolux 818 37 12-00/2
13
Door Reversal
1. Close the cabinet and remove the plug from the
electrical socket.
1
2. Remove the ventilation grille. There is a part on
the grille that can be removed. Remove and
reposition it on the other side.
3. Put the cabinet on a wooden board when it is laid
down. Later, when raising the cabinet, it will be
easier to grip under the cabinet thanks to the board.
4. On the upper part of the cabinet. Put the hinge pin
on the other side.
5. On the lower part of the cabinet.
a. Unscrew the hinge.
b. Remove the door-closing fittings from the hinge
and put the hinge pin on the other side. Then attach
the supplied door-closing fitting.
6. a. Remove the door-closing fitting from the
bottom of the door.
b. Then secure the supplied door-closing fitting on
the other side.
c. Secure the lower hinge.
Remove any play in the door by adjusting the height
of the lower hinge with the supplied spanner. Secure
with the lock-nut.
2
3
4
5b
5a
6
a
b
7. Raise the cabinet and replace the ventilation grille.
8. To transfer the handle.
Unscrew the screws. Fit the handle onto the opposite
side by turning it one half circle. Press the supplied
plastic plugs into the holes to which the handle was
previously fitted.
9. Put the cabinet in position. Check that the
appliance is level. See the section "Positioning the
cabinet".
Electrical connection
Connect the cabinet to a grounded electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left inside the
cabinet.
c
8
14
Electrolux 818 37 12-00/2
Loading...