Specifications and Main Features
- Type: Model that can be moved with ease without restrictions
- Modes: Includes cooling, dehumidification, heating only on electronic models, ventilation and air filtration.
- Range of Temperature: 21°C - 32°C / 70°F - 90°F
- Conditions for testing cooling efficiency:
- Internal Ambient Conditions: 27°C/80°F DB - 19°C/67°F WB
- Entry Air Ambient: 30°C/86°F and Relative Humidity of 80%
- Features:
- Control System that uses Electronic Microprocessor (Enhanced Models)
- Operation without physical contact to control unit (enhanced models)
- Operating on a preset time schedule.
- automatic start once power returns.
- Automatically goes off for 3 minutes to prevent compressor damage
- Indication for filter and water overflow.
- MEMORY function saves the program last set.
- Remote Control Functions:
- START/STOP, Different modes of operations, FANS SPEEDS, Set Temperatures, TIMER, SLEEP and room temperature.
- Indicators:
- An indicator that shows if the unit is still working
- An indicator which shows when the filter is used up
- An indicator for the timer remote control
- Filters: Designed with One filter as the primary and two as additional filters of activated carbon and electrostatic materials to purify air.
- Warranty: Setting up of these devices should be done properly i.e. the device must be properly grounded and only authorized electricians are allowed to set the electrical connections.
Frequently Asked Questions
Q: Can you assist me to switch on the air conditioner?
A: To power on, press the START/STOP button which is located at the remote control as well as on the unit.
Q: The filter indicator illuminates, what do I need to do?
A: Clean the air filter as that is what the indicator is suggesting.
Once the filter is cleaned, it notifies you to reset the indicator.
Q: Am I able to use the air conditioner in heating mode?
A: Only if the model is an electronic one as it only supports heating.
Q: What instructions should I follow to set the timer on the air conditioner?
A: Click the TIMER button on the remote control and adjust the time using other buttons as required.
Q: What if the water tank is found to be full?
A: The filter indicator shall blink revealing that the water tank needs to be drained before cooling goes into operation.
Q: Is it possible to move the air conditioner around?
A: Yes, it is suitable for use in different rooms without any trouble, as long as the exhaust hose is properly secured.
Q: Is the remote in any way required to operate the device?
A: No, the device can also be utilized and controlled through its on-unit controls.
Q: What steps are to be followed in order to properly clean the air filter?
A: The air filter should be cleaned out on a monthly basis at the least, by rinsing it with lukewarm water and letting it dry before reinstalling it.
Q: If my unit is hot, what should I do?
A: Check for obstructions in the air filters, the exhaust hose, and the ambient temperature settings. Modify your temperature settings if needed.
User Manual
Loading...