You’ve chosen a first classproduct from Electrolux, which hopefully willprovide you with lots of pleasure in the future. Electrolux ambition is to offer a wide variety of quality products that would make your life even more comfortable. You can look at some examples on the cover in this manual. But now it’s time to study this manual and start using and enjoying the benefits from your new machine. Wepromise that it’ll make your life a little easier. Good luck!
4
electrolux
contents
Contents
Important safety information5 Product description7 Before using the appliance8 Operation 10 Programme charts 17 Hints and tips21 What to do if…23 Care and cleaning25 Technical data29 Installation 30 Environment 35 Guarantee / Customer care 36 European guarantee38
The following symbols are used in this user manual:
Important information concerning
your personal safety and information on how to avoid
damaging the appliance. General information and tips Environmental information
electrolux
Important safety information
These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance.
Your safety is of paramount importance. Ifyou are unsure about any of the meanings of these warnings please contact customer care.
Installation
The appliance must be installed according to the instructions supplied.
The installation work must be undertaken by a qualified electrician or competent person.
The appliance should be serviced by an authorised Service Engineer and only genuine approved spare parts should be used.
The appliance must be installed in an adequately ventilated room.
It is imperative that the appliance is left in the base to protect both the appliance and the floor.
This appliance is heavy and care must be taken when moving it.
Do not attempt to lift or move this appliance by the handles.
All packaging, both inside and outside the appliance must be removed before the appliance is used.
It is dangerous to alter the specifications or modify the appliance in any way.
Child safety
Do not allow children to play with any part of the packaging.
on the drop down doors.
by children and other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliancesafely.
ensure that they do not play with the appliance.
CAUTION: Accessible parts may be hot. Young children should be kept away.
During use
This appliance is not intended to be operated by means of an external timer or separate remote control system.
domestic use to cook edible foodstuffs only and must not be used for anyother purposes.
and oils as they will ignite if they become too hot.
important safety information
Do not allow children to sit or climb
This appliance is not intended for use
Children should be supervised to
This appliance has been designed for
Take great care when heating fats
5
6
electrolux
important safety information
Never place plastic or any other material that may melt in or on the oven.
Do not leave the grill pan handle in position when grilling as it will becomehot.
Always use oven gloves to remove and replace the grill pan handle when grilling.
Always support the grill pan when it is in the withdrawn or partially withdrawn position.
Always use oven gloves to remove and place food in the oven.
During use the appliance becomeshot. Care should be taken to avoid touching the heating elements inside the oven.
Ensure that all vents are not obstructed to ensure ventilation of the oven cavity.
Never line any part of the appliance with foil.
Always stand back from the appliance when opening the oven door to allow any build up of steam or heat to release.
Stand clear when opening the drop down doors. Support the doors using the handles until fully open.
Never leave the appliance unattended when the oven door is open.
Do not place sealed cans or aerosols inside the oven. They may explode if they are heated.
Ensure that all control knobs are in the OFF position when not in use.
Do not stand on the appliance or on
the open oven doors.
Do not hang towels, dishcloths or clothes from the appliance or its handles.
Do not use this appliance if it is in contact with water. Never operate it with wet hands.
Cleaning and maintenance
For hygiene and safety reasons this appliance should be kept clean at all times. A build-up of fat or other foodstuff could result in a fire especially in the grill pan.
Do not leave cookware containing foodstuffs, e.g. fat or oil in the appliance in case it is inadvertently switched on.
Always allow the appliance to coolbefore switching off at the wall prior to carrying out any cleaning/maintenance work.
Only clean this appliance in accordance with the instructions given in this book.
Never use steam or high pressure steam cleaners to clean the appliance.
Product description
Control Panel Top Oven/Grill Main Oven
electrolux
Electronic timer Top Oven/ Grill Function Selector Top Oven/ Grill Temperature Indicator Neon Top Oven/Grill Temperature Control Main Oven Temperature Indicator Neon Main Oven Temperature Control
product description
7
8
electrolux
before using the appliance
Before using the appliance
Rating plate
This is situated on the front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).
The appliance must be protected by
a suitably rated fuse or circuit breaker.
The rating of the appliance is given
on the rating plate.
Do not remove the rating plate fromthe appliance as this may invalidate the guarantee.
Preparing to use your appliance
Wipe over the base of the oven(s) with a soft cloth using hot soapywater.Wash the furniture before use.
We suggest that you run the oven(s)and grill for 10 – 15 minutes at maximum temperature, to burn off any residue from their surfaces. Accessibleparts may become hotter than in normal use. Children should be kept away. During this period an odour may be emitted, it is therefore advisable to open a window for ventilation.
The cooling fan for the controls
The cooling fan comes on immediately when the grill is switched on and after a short time when the oven is in use. It may run on after the controls are switched off until the appliance has cooled.
During the initial period the cooling fan may turn on and off, this is quite normal.
Always allow the cooling fan to cool the appliance down before switching off at the wall prior to carrying out any cleaning or maintenance work.
Control panel indicator neon(s)
The indicator neon will operate when the grill (where applicable) or oven(s) is switched on. The indicator neon will glow. It may turn on and off during use to show that the setting is being maintained. If the neon does not operate as the instructions indicate the controls have been incorrectly set. Return all controls to zero and reset following the instructions for the required setting.
Condensation and steam
When food is heated it produces steam similar to a boiling kettle. The vents allow some of this steam to escape. However, always stand back from the appliance when opening the door(s) toallow any build up of steam or heat to release.
If the steam comes into contact with a cool surface on the outside of the appliance, e.g. a trim, it willcondense and produce water droplets. This is quite normal and is not caused by a fault on the appliance.
To prevent discolouration, regularly wipe away condensation and foodstufffrom surfaces.
electrolux
before using the appliance
9
For your safety wall coverings at the rear of the appliance should be securely fixed to the wall.
Cookware
Baking trays, dishes etc., should not be placed directly against the grid covering the fan at the back of the oven.
Do not use baking trays larger than 30cm x 35cm (12” x 14”) as they willrestrict the circulation of heat and may affect performance.
Grill and oven furniture
The following items of grill and oven furniture have been supplied with the appliance. Ifyou require replacements of any of the items listed below pleasecontact your local service force centre.
1 grill pan
1 grill pan grid
1 straight shelf (For grilling and top oven cooking)
2 straight shelves (For main oven cooking)
1 grill pan handle
10
electrolux
The timer
operation
:
Key
1.
Cook time indicator neon
2.
End time indicator neon
3.
Countdown indicator neon
4.
Time indicator neon
5.
Decrease control
6.
Selector control
7.
Increase control
The time of day must be set before the main oven will operate manually.
To set the time of day
The oven has a 24 hour clock. When the electricity supply is first switched on, the display will show 12:00 and the 'Time' indicator neon
will flash.
To set the correct time press the increase control button necessary, the decrease control button
until the correct time on the 24 hour
clock is reached. The 'Time' indicator neon
will flash for 5 seconds and
then go out.
and if
The increase and decrease control buttons operate slowly at first, and then more rapidly. They should be pressed separately.
To set the countdown
The 'Countdown' gives an audible reminder at the end of any period of cooking.
This cooking period may be up to 2 hrs 30 mins. It is not part of the automatic control.
To set, press the Selector Control button
indicator neon
until the 'Countdown'
is illuminated and
the display reads 0:00.
To set the required time duration, press the increase control
until the display indicates the interval to be timed. If necessary press the decrease control
to achieve the correct time
interval.
This must be completed within 5 seconds of first pressing the Selector Control button.
During the operation of the 'Countdown', the remaining time period will be shown in the display. The 'Countdown' will soundintermittently for up to 2 minutes at the end of the timed period. The sound can be stopped by pressing any button.
To cancel the countdown
If you change your mind and want to cancel the 'Countdown', press the
Selector Control button 'Countdown' indicator neon
until the
flashes then depress the decreasecontrol
until 0:00 shows in the
display. The 'Countdown' indicator neon
will continue to flash for a few seconds and then return to the time of day.
To set the oven timer control
Only the main oven can be automatically timed.
When using the timer control for the very first time, it is advisable to let it operate while you are at home. The display can be checked to show that it is operating correctly and you will feelconfident to leave a meal to cook automatically in the future.
To set the timer to switch on andoff automatically
1.
Ensure the electricity supply is
switched on and that the correct
time of day is displayed.
2.
Place food in oven.
electrolux
5.
Release the buttons. The 'Cook Time' indicator neon
operation
will be
illuminated.
Remember, this must be completed within 5 seconds of first pressing the Selector Control button.
6.
To set the 'End Time'. Press the Selector Control button
'End Time' indicator neon
until the
flashes. Press the increase control button
until the required stop time is displayed. If necessary press the decrease control
until the required
time interval is achieved. Release the buttons. The time of day
7.will be displayed after 5 seconds.
The 'Cook Time'Time'
indicator neons will be
and 'End
illuminated.
8.
Set the main oven control to the required temperature. The oven indicator neon should be off.
11
To set the length of cooking time.
3.Press the Selector Control button
until the 'Cook Time' indicator neon
is illuminated.
Press the increase control until the
4.required length of cooking time isdisplayed. If necessary press the decrease control
until the correct time interval is achieved. The maximum cooking time is 10 hours.
When the automatic timed period starts, the oven indicator neon will turn on and off periodically during cooking, showing that the temperature is being maintained.
12
electrolux
operation
To set the timer to switch off only
1.
Ensure the electricity supply is switched on and that the correct time of day is displayed.
2.
Place food in the oven.
3.
To set the length of cooking time, press the Selector Control button
until the 'Cook Time' indicator neon
is illuminated. Press the
increase control
until the required length of cooking time is displayed.Press the decrease control
if
necessary.
4.
Release the buttons. The 'Cook Time' indicator neon
willilluminate and the time of day will be displayed after 5 seconds.
5.
Set the oven temperature.The oven indicator neon should be on.
6.
To check the 'End Time' during the cooking period, simply press the
Selector Control button
once and
the remaining time will be displayed.
To cancel an automatic programme
1.
To cancel an automatic programme press the Selector Control button
until the 'Cook Time' indicator neon
flashes. Press the decrease
control
2.
Release the buttons. The 'Cook Time' indicator neon
until the display reads 0:00.
will flashand after 5 seconds return to the time of day.
3.
Turn off the oven controls.
To return the appliance to manual
At the end of a timed cooking period, the 'End Time' indicator neon
flash and an alarm will sound for up to 2 minutes.
1.
To stop the sound, press any of the three buttons.
2.
The display will return to the time of day.
3.
Turn off the oven controls.
Things to note
In the event of an interruption of the electricity supply, the timer will reset it self and all programming will be cancelled.
Your timer has an energy save mode which allows you to switch the display off.For setting details please refer to the environmental chapter of this manual.
Automatic cooking
It is advisable to leave food in the oven for as short a time as possible before automatic cooking. Always ensure commercially prepared food is well within its use by date and that home prepared food is fresh and of good quality.
When cooking is complete,do not leave food to stand in the oven, but remove and cool it quickly if the food is not to be consumed immediately.
Always ensure food in the oven has been covered before cooking if it is not possible to remove food immediately after cooking.
will
The grill
CAUTION: Accessible parts may be hot when the grill is in use. Young children should be kept away.
The grill is a dual circuit grill which meansthat the full area of the grill can be used, or for economy purposes, the centre section only can be used when cooking smaller quantities of food.
Using the dual grill
•
Turn the top oven/grill function selector
setting.
The grill settings are as follows: -
•
Turn the top oven/grill temperature control to the right as far as it will go.
This is the hottest setting
•
To use the grill at a lower setting turn the top oven/grill temperature control
knob to a lower setting
Things to note
•
To oven light will illuminate.
•
The indicator neon will glow. It may turn on and off during use to show that the setting is being maintained.
•
The cooling fan for the controls may operate after a time.
•
Some smoke from fat splashes may be evident as the grill cleans itself.
•
Never cover the grill pan or grid with foil as this can lead to grill fires.
to the required power
Centre grill area at full power. Full grill area at full power.
.
.
electrolux
To fit the grill pan handle
To insert the handle, press the button on the handle with the thumb and pivot the
operation
handle slightly upwards inserting the lip into the widest part of the bracket.
Move the handle towards the left, lower into position and release the button.
Ensure the handle is correctly located when lifting the grill pan.
To remove the handle, press the button on the handle with the thumb and pivot the handle slightly upwards and towards the right to remove from the bracket.
Always remove the grill pan handleduring grilling.
Protect your hands when removingthe grill pan handle.
To correctly locate the grill pan on the shelf, ensure that the cut out on the underside of the handle bracket locates over the front bar of the shelf.
13
14
electroluxoperation
The top oven
The top oven is the smaller of the two ovens. It is heated by elements in the top and bottom of the oven. It is designed for cookingsmaller quantities of food. It gives especially good results if used to cook fruitcakes, sweets and savoury flans or quiche.
The top oven is ideal for use as a warming compartment. It can be used to warm dishes and keep food hot. Use the lowest setting on the top oven temperature control.
Using the top oven
•
Turn the top oven/grill function selector to the required setting
•
Turn the top oven/grill temperature control to the required setting
Things to note
•
The oven light will illuminate.
•
The indicator neon will glow. It may turn on and off during use to show that the setting is being maintained.
•
The cooling fan for the controls may operate after a time.
.
Do not place dishes, tins and trays directly on the oven base as it becomes very hot and damage willoccur.
To fit the top oven shelf
The shelf should be fitted with the straight rods uppermost on the frame and the forms towards the back of the oven.
To remove a shelf slide the shelf towards you until the shelf stop is reached. Tilt shelf up at the front so
.
that the stops clear the side supports. Lift shelf clear.
To install a shelf, reverse the abovesteps. Each shelf position has an upper and lower support wire, ensure the shelf is placed between these two support wires.
Do not place cookware and cooking pots with rough bases e.g. cast iron on the oven door as damage to the glass may occur.
The fan oven
The fan oven is particularly suitable for cooking larger quantities offood.
The advantages offan oven cooking
are:
Preheating
The fan oven quickly reaches its temperature, so it is not usually necessary to preheat the oven. Without preheating however, you mayneed to add an extra 5 – 10minutes on the recommended cooking times. For recipes needing high temperatures, e.g.bread, pastries, scones, soufflés etc., best results are achieved if the oven is preheated first. For best results when cooking frozen or cooked chilled readymeals always preheat the oven first.
Cooking temperatures
Fan oven cooking generally requires lower temperatures than conventional cooking. Follow the temperatures recommended in the cooking chart. As a guide reduce temperatures by about 20°C – 25°C for your own recipes, using a conventional oven.
Batch baking
The fan oven cooks evenly on all shelf levels, especially useful when batch baking.
Using the fan oven
•
Turn the main oven temperature control to the required setting
.
electrolux
Things to note
•
The oven light will illuminate.
•
The indicator neon will glow. It may turn on and off during use to show that the setting is being maintained.
•
The cooling fan for the controls may operate aftera time.
Do not place cookware and cooking pots with rough bases e.g. cast iron on the oven door as damage to the glass may occur.
To fit the main oven shelves
The shelves should be fitted with the straight rods uppermost on the frame and the forms towards the back of the oven.
Back of the oven
Straight Rods
To remove a shelf slide the shelf towards you until the shelf stop is reached. Tilt shelf up at the front so that the stops clear the side supports. Lift shelf clear.
To install a shelf, reverse the abovesteps. Each shelf position has an upper and lower support wire, ensure the shelf is placed between these two support wires.
operation
Frame
15
16
electrolux
operation
Defrost
This function defrosts most foods faster than more conventional methods.It is particularly suitable for delicate frozen foods, which are to be served cold e.g. cream filled gateaux, cakes covered with icings or frostings, cheesecakes, biscuits, scones, etc.
Using the defrost feature
•
Turn the main oven temperature
control to the required setting.
Things to note
•
The oven fan and interior light willcome on.
electrolux
programme charts
Grilling chart
FOOD GRILL TIME (mins in total)
Bacon Rashers 5 - 6
Beef Burgers 10 - 15
Chicken Joints 30 - 40
Lamb Chops 15 - 20
Pork Chops 20 - 30
Whole Trout/Mackerel 15 - 25
Plaice/Cod Fillets 10 - 15
Kebabs 20 - 30
Kidneys – Lamb/Pig 8 - 12
17
Liver – Lamb/Pig 10 - 20
Sausages 20 - 30
Steak – Rare 6 - 12
Steak – Medium 12 - 16
Steak – Well Done 14 - 20
Toasted Sandwiches 3 - 4
The times quoted above are given as a guide and should be adjusted to suit personal taste.
Adjust the grill setting and the grill pan grid to suite different thicknesses of food.
18
electrolux
programme charts
Oven cooking chart
The oven temperatures are intended as a guide only. It may be necessary to increase or decrease the temperatures to suit individual preferences and requirements.
Large Yorkshire Puddings: Individual Yorkshire Puddings
Note: Shelf positions are counted from the bottom of the oven. Note: Fan oven shelf positions are not critical but ensure that they are evenly spaced when more than one is used.
210 - 220 3 200 - 210 25 - 40
200 - 210 3 200 - 210 15 - 25
20
electrolux
programme charts
Roasting chart
MEAT TEMPERATURE COOKING TIME
Beef/ Beef boned 160-180°C
Mutton/Lamb 160-180°C
Pork/Veal/Ham 160-180°C
Chicken 160-180°C
Turkey/Goose 160-180°C
Duck 160-180°C
Pheasant 160-180°C
Rabbit 160-180°C
INTERNAL TEMPERATURES –
Rare: 50-60°C; Medium: 60-70°C; Well done: 70-80°C
The roasting temperatures and times given in the chart should be adequate for most joints, but slight adjustments may be required to allow for personalrequirements and the shape and texture of the meat. However, lowertemperatures and longer cooking times are recommended for less tender cuts or larger joints.
Wrap joints in foil if preferred, for extra browning uncover for the last 20 – 30
min. cooking time.
20-35 minutes per ½kg (1lb)and 20-35 minutes over
25-35 minutes per ½kg (1lb)and 25-35 minutes over
30-40 minutes per ½kg (1lb)and 30-40 minutes over
15-20 minutes per ½kg (1lb)and 20 minutes over
15-20 minutes per ½kg (1lb) up to 3½kg (7lb) then 10 minutes per ½kg (1lb) over 3½kg (7lb)
25-35 minutes per ½kg (1lb)and 25-30 minutes over
35-40 minutes per ½kg (1lb)and 35-40 minutes over
20 minutes per ½kg (1lb) and 20 minutes over
Hints and tips
Hints and tips when using the grill
•
Most foods should be placed on the grid in the grill pan to allow maximum circulation of air and to lift the food out of the fats and juices.
•
Adjust the grid and grill pan runner position to allow for different thicknesses of food.
•
Position the food close to the element for faster cooking and further away for gentler cooking.
•
Food should be thoroughly dried before grilling to minimise splashing. Brush lean meats and fish lightly with a little oil or melted butter to keep them moist during cooking.
•
Accompaniments such as tomatoes and mushrooms may be placed underneath the grid when grilling meats.
•
When toasting bread, use the shelf in the top position with the grid in the ‘high’ position.
•
Preheat the grill on a full setting for a few minutes before sealing steaks or toasting. Adjust the heat setting and the shelf as necessary during cooking.
•
The food should be turned over during cooking as required.
•
When using the centre section grill, ensure food is placed centrally on the grilling grid directly beneath the grill element.
electrolux
Hints and tips when using the top oven
•
Arrange the shelves in the required positions before switching the oven ON. Shelf positions are counted from the bottom upwards.
•
There should always be at least
2.5cm (1”) between the top of the food and the element. This gives best cooking results and allows room for rise in yeast mixtures, Yorkshire puddings etc. When cooking cakes, pastry, scones bread etc., place the tins or baking trays centrally on the shelf.
•
Ensure that food is placed centrally on the shelf and there is sufficient room around the baking tray/dish to allow for maximum circulation.
•
Stand dishes on a suitably sized baking tray on the shelf to prevent spillage onto the oven base and to help reduce cleaning.
•
The material and finish of the baking tray and dishes used affect base browning. Enamelware, dark, heavy or non-stick utensils increase base browning. Shiny aluminium or polished steel trays reflect the heat away and give less base browning.
•
Because of the smaller cooking space and lower temperatures, shorter cooking times are sometimes required. Be guided by the recommendations given in the cooking chart.
hints and tips
21
22
electroluxhints and tips
•
For economy leave the door open for the shortest possible time,particularly when placing food into a pre-heated oven.
Hints and tips when using fan cooking
•
Arrange the shelves in the required positions before switching the oven on. Shelf positions are counted from the bottom upwards.
•
•
•
•
14
1
When cooking more than one dish in the fan oven, place dishes centrally on different shelves rather than cluster several dishes on one shelf, this will allow the heat to circulate freely for the best cooking results.
When batch baking one type of food, e.g. Victoria sandwich cakes, those of similar size will be cooked in the same time.
It is recommended that when baking larger quantities the shelf positions should be evenly spaced to suit the load being cooked. A slight increase in cooking time may be necessary.
Do notplace baking trays directly on the oven base as it interferes with the oven air circulation and can lead to base burning; use the lower shelf position.
Hints and tips when defrosting
•
Place the frozen food in a single layer where possible and turn it over half way through the defrosting process.
•
The actual speed of defrosting is influenced by room temperature. On warm days defrosting will be faster than on cooler days.
•
It is preferable to thaw fish, meat and poultry slowly in the fridge. However, this process can beaccelerated by using the defrost function. Small or thin fish fillets, frozen peeled prawns, cubed or minced meat, liver, thin chops, steaks etc., can be thawed in 1 – 2 hours.
•
A 1kg/2¼lb oven ready chicken will be thawed in approximately 5 hours. Remove the giblets as soon as possible during the thawing process.
•
Joints of meat up to 2kg/4½lb in weight can be thawed using the defrost function.
•
All joints of meat and poultry must be thawed thoroughly before cooking.
•
Always cook thoroughly immediately after thawing.
•
Do not leave food at room temperature once it is defrosted. Cook raw food immediately or store cooked food in the fridge, once it has cooled.
electrolux
what to do if…
What to do if…
Please carry out the following checks on your appliance before calling aService Engineer. It may be that the problem is a simple one which you can solve yourself without the expense of a service call.
PROBLEM POSSIBLE SOLUTION
The grill, ovens and timer do not work.
Check that the main appliance fuse is
If you have checked the above:
The grill and top oven work but the main oven does not.
The grill does not work or cuts out after being used for a long period of time.
Leave the grill door open and allow
The timer does not work. Check that the instructions for the
The indicator neons are not working correctly.
In-guarantee customers should make sure that the checks have been made as the engineer willmake a charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service calls.
Check that the appliance has been wired in to the appliance supply and isswitched on at the wall.
working.
Allow the appliance to cool for a couple of hours. The appliance should now be working normally. Check that the time of day has been set on the clock. Check that the oven is set for manual cooking.Ensure the cooling fan is running when the grill is on. If the cooling fan fails, the grill will not operate correctly. Contact your local service force centre.
the grill to cool. After a couple of hours check that the grill works as normal
operation of the timer are being closely followed. Check that you have selected only the function you require. Ensure all other controls are in the off position.
23
24
electrolux
what to do if…
What to do if continued…
PROBLEM POSSIBLE SOLUTION
The oven is not cooking evenly. Check that the appliance is correctly
installed and is level.
Check that the recommended
temperatures and shelf positions are being used.
The oven light fails to illuminate. The oven light bulb may need
replacing.
If the Main Oven is set for automatic
cooking the light will illuminate when
the cook time begins. The oven fan is noisy. Check that the oven is level.Check that the shelves and bakeware
are not vibrating in contact with the
oven back panel. The oven temperature is too high or too low.
Check that the recommended
temperatures and shelf positions are
being used. Be prepared to adjust
the temperature up or down slightly
to achieve the results you want.
Care and cleaning
electrolux
care and cleaning
25
Before cleaning always allow the appliance to cool down before switching off at the electricitysupply.
Cleaning materials
Before using any cleaning materials on your appliance, check that they are suitable and that their use isrecommended by the manufacturer.
Cleaners that contain bleach should not be used as they may dull the surface finishes. Harsh abrasives and scourers should also be avoided.
Cleaning the outside of the appliance
Do not use abrasive cleaning materials e.g. abrasive cream cleaners, wire wool pads or scourers on painted or printed finishes as damage may occur. Regularly wipe over the control panel, control knobs, handles, doors and appliance sides using a soft cloth and hot soapy water. To prevent streaking, finish with a soft cloth.
Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish.
Any spillage on the stainless steel finish must be wiped off immediately.
Do not attempt to remove any of the control knobs from the appliance as this may cause damage and is a safety hazard.
Removing and replacing the wirework runners
1.
Remove all shelves and furniture fromthe oven.
2.
Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the oven.
3.
Unhook the runner at the top and remove from the cavity.
4.
To replace the runners, hook the wirework side runner into the cavity, slide back and press into place.
Ensure the wirework runners are firmly in position before replacing the oven shelves.
26
electrolux
care and cleaning
Cleaning the shelves, wire-work runners and grill/oven furniture
All removable parts, except the grill pan handle can be washed in the dishwasher.
The grill pan, grill pan grid, oven shelves and wirework runners may be cleaned using a soap impregnated steel wool pad. Soaking first in hot soapy water will make cleaning easier.
Cleaning inside the grill and oven compartments
The sides and back of the grill/top oven and main oven compartments are coated with a special Stay-clean coating. They should not be cleaned manually.
The vitreous enamel main oven base and grill compartment base can be cleaned using normal oven cleaners with care. Ensure that the manufacturers instructions are followed and that all parts are well rinsed afterwards.
Aerosol cleaners must not come into contact with elements, the door seal, or any painted finishes as this may cause damage.
Aerosol cleaners must not be used on Stay-clean surfaces.
•
To carry out the cleaning cycle, remove the oven shelves and set the oven to max which is the cleaning setting.
•
It is a good idea to run the oven for an hour or two per week to ensure continued good performance from the Stay-clean finish.
•
Slight discolouration and polishing of the Stay-clean surfacesmay occur in time. This does not affect the Stay-clean properties in any way.
•
Use minimal, if any, extra oil or fat when roasting meat, potatoes only require brushing with fat before cooking. Extra fat in the oven during roasting will increasesplashing and staining of thecavity.
•
It is not necessary to add water to a meat tin when roasting. The water and the fat juices from the joint create excessive splattering during cooking – even at normal temperatures, as wellas causing condensation.
•
Covering joints during cooking will also prevent splashing onto the interior surfaces. Removing the covering for the last 20-30 minutes will allow extra browning ifrequired.
electrolux
care and cleaning
27
Cleaning the door(s)
Under no circumstances shouldthe door assembly be detached from the product for cleaning.
To prevent damaging or weakening the door glass panels avoid the use of the following:
•
Household detergents and bleaches
•
Soap impregnated pads unsuitable for non-stick saucepans.
•
Abrasive cleaning pads, scourers and steel woolpads.
•
Chemical oven pads or aerosols.
•
Rust removers.
•
Bath/Sink stain removers.
Cleaning between the outer and inner door glass
The door glass is removable for cleaning.
Clean the outer and inner glass using hot soapy water or hob cleaner may be used. Do notuse hob cleaner on the
Stainless Steel or painted finishes.
Ensure that all parts are well rinsed and thoroughly dried before attempting to replace the glass.
To remove the door glass
1.
Open the oven door slightly to gain access to the two cross headscrews on the top of the oven door.
2.
Loosen the two screws using a Pozidrive screwdriver.
3.
Hold the door glass securely in place with one hand before removing the screws and washers completely with the other hand. The screws and washers retain the trim on the top of the grill door. Note the position of the trim on the door.
Grill door trim
4.
Holding the door and glass with one hand, gently pull towards you and slightly lift the door glass with the other hand to disengage the panel from the location point at the bottom of the door. Gently release the door to close it.
5.
Clean the outer and inner glass using hot soapy water or hob cleaner may be used. Do not use hob cleaner on the Stainless Steel or painted finishes. Do not try to clean the foil, which is insidethe door. The foil is there to help keep the door cool, if it is damaged it will not work. Ensure that all parts are well rinsed and thoroughly dried before attempting to replace the outer door.
28
electrolux
care and cleaning
If the door glass panel becomes chipped or has deep scratches the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Please contact your local service force centre who will be pleased to advise further.
To replace the outer door glass
1.
Holding the oven glass with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door.
2.
Holding the door glass with your left hand, use your right hand to open the oven door. Bring the door gently towards the glass panel ensuring the screw location holes line up.
3.
Place the trim in the correct position on the top of the grill door.
4.
Hold the glass in place with one hand and insert the crosshead screws with washers into the location holes with the other hand. Give the screws one turn to ensure the glass is secure.
5.
Tighten the screws positively with a Pozidrive screwdriver beforeclosing the oven door.
Replacing an oven light bulb
The type of bulb required is a 300°C 25 watt small Edison Screw.
Disconnect the appliance from the electricity supply before replacing the bulb.
1.
Make sure the appliance is cool before replacing the bulb.
2.
Open the oven door and remove the shelves and wirework runners.
3.
Pull the glass bulb cover towards you and then pull it off.If necessary,use a screwdriver to carefully lever off the cover, taking care not to damage the oven cavity.
4.
Unscrew the bulb by turning it to the left.
5.
Fit a new bulb and then replace the glass bulb cover.
6.
Refit the wirework runners and replace the shelves.
7.
Restore the electricity supply.
Do not attempt to use the oven without the glass being in place.
This appliance complies with: European Council Directive 73/23/EEC EMC Directive 89/336/EEC CE Marking Directive 93/68/EEC Energy Label Directive 2002/40/EC
29
30
electrolux
installation
Installation
•
This appliance must be installed by a
qualified electrician/competent
person. Safety may be impaired if
installation is not carried out in
accordance with these instructions.
•
This appliance must be earthed.
•
Do not remove the screws from the
earth tab extending from the oven
mains terminal block.
•
Before connecting the appliance
make sure that the voltage of your
electricity supply is the same as that
indicated on the rating plate. This is
situated on the lower front frame of
the appliance and can be seen upon
opening the door. Alternatively the
rating plate may also be found on the
back or top of some models (where
applicable).
•
Do not alter the electrical circuitry of
this appliance.
Things to note
•
This appliance is designed to be fitted in cabinets of the recommended dimensions as shown.
700
80
•
•
•
•
360
560 min
If there is an existing housing unit it must be removed.
The dimensions given provideadequate air circulation around the unit within the cabinet, ensuring
compliance with BS EN60-335.The appliance must not be installed on a wooden base board. Enquiries regarding the installation of the cooker point, if required, should be
made to your Regional Electricity Company to ensure compliance with their regulations.
720
electroluxinstallation
31
•
The appliance socket switch should be outside the cabinet but within 2m of the appliance to make it accessible to switch off the appliance in case of an emergency.
•
To protect the hands, wear gloves when lifting the oven into its housing.
Do not lift the appliance by the handles.
Note: House circuit
Earth leakage and continuity tests must be carried out before the appliance is connected to the mains supply and re-checked after fitting.
Choice of electrical connection
•
The appliance should be operated using at least 6mm2 twin core and earth PVC insulated mulit core cable. Please choose from the most appropriate after reading the different methods:-
•
By connecting the appliance to a cooker point (having a double pole isolating switch with at least 3mm contact separation in all poles) and protected with a fuse or miniature circuit breaker at your mains fuse box.
•
If you wish to connect an oven and a hob to a cooker point you can. Oven and hob units should be separately connected to a cooker point.
Cooker point
Note: It is good practice to :
•
Fit an Earth Leakage Circuit Breaker to your house wiring.
•
Wire your appliance to the latest IEE regulations.
Preparing cabinet for fitting of oven
•
Make sure the space between the cabinets is the correct size for the appliance to be fitted.
•
The plinth board spanning the space into which the appliance is to be installed should be removed.
•
If the size is between adjacent cabinets is 605-610mm, then the cabinets should be modified so that the recommended dimension of at least 600-605mm is maintained. The modification should ideally be localised to ensure that after screw fitment the oven is securely fixed into position.
•
The cabinets must be stable and level by firmly securing it to the wall or floor. If necessary, make arrangements to ensure the shelf upon which the oven will rest is level.
•
The adjacent cabinets must be stable and level by firmly securing to the wall or floor. If necessary, make arrangements to ensure the work surface below which the oven will rest is level.
•
Drill two pilot screw holes into the sides of the adjacent cabinets, in the positions indicated.
700
Oven
Hob
Pilot holes
80
360
560 min
720
32
electrolux
installation
•
Fit the appliance mounting brackets using the two holes indicated to the adjacent cabinets.
•
Check that the mounting brackets are level. They can be adjusted if necessary by using the extra holes at the ends of the brackets. Once the brackets are level, drill a pilot hole through the central hole in the bracket and fit the remaining screw.
How to finish unpacking
•
Place packed appliance next to the space in which it will be installed.
•
Remove the appliance packing except for bottom tray, which should be left in position until the appliance is ready to be fitted into its cabinet.
•
NOTE: It is imperative that the appliance is left in the base to protect both the appliance and the floor.
•
Ensure the user is given these operating instructions.
To remove cover of mains terminal
From the rear of the appliance, remove mains input terminal cover to gain access to terminal block.
•
First remove retaining screw with pozidrive screwdriver.
•
Prise cover loose using screwdriver in position (1) then lever off with screwdriver in position (2) at either side.
Important: Switch off at the mains, miniature circuit breaker and if appropriate, remove fuse before commencing any electrical work.
electrolux
installation
33
•
Lift cover and remove screw from cable clamp.
Hook clamp
under here
Cable
clamp
Connecting to the mains terminal
Warning: This appliance must be earthed.
•
•
We recommend you use a new length
2
of 6mmto ensure your safety. Make connection as shown by proceeding as follows:-
twin core and earthed cable
uninsulated Earth wires are used ensure they are suitably sheathed to leave 10mm bare wire to fit into the terminal.
•
Clamp bare wires into the relevant terminal and check they are held by tugging each one in turn.
•
Clamp the mains cable securely ensuring 5mm of the outer insulation is inside the terminal block and that the wires are not taut but not so slack as to cause any fouling. See diagram.
•
Place fuse/miniature circuit breaker in circuit and switch on at mains.
Checking electrical connections
Correct electrical connection can be confirmed when switching on the appliance and setting the grill.
Note: House circuit
Earth leakage and continuity tests must be carried out before the appliance is connected to the mains supply and re-checked after fitting.
Connecting to a hob or cooker point
•
Either follow in general terms the instructions for connecting to the terminal block or refer to the hob suppliers installation instructions.
•
Preform wires to the appropriate shape to suit fitting into the mains terminal block.
•
Strip inner insulation on wires using wirestrippers.
•
Twist the bared wires using pliers.
•
Cut bared wires 10mm away from the end of the inner insulation. Where
Feed the cable through the cabinet and arrange to route the cable away from the appliance which may become hot.
Fitting into the space between cabinets
IMPORTANT: Ensure that the oven is switched off at the wall before any further work is carried out.
34
electrolux
•
Position the appliance in front of the
installation
cabinet.
•
The appliance can be pushed fully into the space. Take care to avoid fouling the mains lead.
•
Ensure the appliance is central and level.
•
When the appliance is fully housed, screw the stability screws (supplied with the appliance) into the underside of the worksurface in the positions indicated, taking care not to distort the trim. It is advisable to turn each screw alternatively to avoid damaging the trim.
•
Take out all oven furniture before installation to reduce the weight you need to lift. The oven door should be taped to keep it closed whilst lifting.
•
To place the appliance into the space between cabinetry follow the procedure below:
Two people will be required to carry out the lifting procedure.
Warning: Do not attempt to lift this appliance by the handle(s).
•
Each person should squat either side of the appliance.
•
Tilt the appliance so that your hands can support the underside of the appliance.
•
Keeping your back straight raise the appliance to the correct height by straightening at the knees.
•
Rest the rear underside of the appliance on the mounting brackets while your hands support the front.
•
Place the heat deflector flush with the edge of the worksurface, with the cork spacers up over and screw into position using the screws supplied with the appliance. Failure to do this may cause damage to the work surface
•
Replace the plinth board.
•
Switch on the appliance and refer to the operating instructions.
Environment
After installation please dispose of the packaging with due regard for safety and the environment. Your local authority can arrange this.
At the end of the appliances life
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall behanded over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, pleasecontact your local city office,your household waste disposal service or the shop where you purchased the product.
electrolux
environment
Energy save mode
By switching off the time display you can save energy.
Switching off the time display
Press and hold any two buttons until the display switches off.
Switching on the time display
Press any button to switch on the display.
The display can only be switched off if none of the timer functions,'Cooktime', 'Endtime', or 'Countdown',is in use.
35
36
electrolux
guarantee / customer care
Guarantee / Customer care
Standard guarantee conditions
We, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:
•
The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
•
The appliance has been used for normal domestic purposesonly, and in accordance with the manufacturer's instructions.
•
The appliance has not been serviced, maintained,repaired, taken apart or tampered with by any person not authorised by us.
•
Electrolux Service Force Centre must undertake all service work under this guarantee
•
Any appliance or defective part replaced shall become the Company's property.
•
This guarantee is in addition to your statutory and other legal rights.
Exclusions
•
Damage or calls resulting fromtransportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic.
•
Costs incurred for calls to put right an appliance which is improperlyinstalled or calls to appliances outside the United Kingdom.
•
Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
•
Products of Electrolux manufacturer that are not marketed by Electrolux
Service and Spare Parts
In the event of your appliance requiring service, or if you wish topurchase spare parts, please contact your local Service Force Centre by telephoning
0870 5 929 929
Your telephone call will be automatically routed to the Service Force Centre covering your postcode area.
For the address of your local Service Force Centre and further information about Service Force, please visit the website at
www.serviceforce.co.uk
electrolux
guarantee / customer care
37
Before calling out an engineer, please ensure you have read the details under the heading "Something not working" When you contact the Service Force Centre you willneed to give the following details:
1.Your name, address and postcode.
2.Your telephone number.
3. Clear concise details of the fault.
4. The model and Serial number of the appliance (found on the rating plate).
5.The purchase date.
Please note a valid purchase receipt or guarantee documentation is required for in guarantee service calls.
Customer Care
For general enquiries concerning yourElectrolux appliance, or for further information on Electrolux products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.electrolux.co.uk
Customer Care DepartmentElectrolux Major AppliancesAddington Way Luton Bedfordshire, LU4 9QQ Tel: 08705 950 950(*)
(*) Calls may be recorded for
training purposes
38
electrolux
european guarantee
European guarantee
This appliance is guaranteed by Electrolux in each of the countries listed below for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications: -
•
The appliance guarantee starts from the date you first purchased the appliance which will be evidenced by production of a valid purchase document issued by the seller of the appliance.
•
The appliance guarantee is for the same period and to the same extent for labour and parts as exists in your new country of
www.electrolux.com
residence for this particular model or range of appliances.
•
The appliance guarantee ispersonal to the originalpurchaser of the appliance and cannot be transferred to another user.
•
The appliance is installed and used in accordance with instructions issued by Electrolux and is only used within the home,i.e. is not used for commercial purposes.
•
The appliance is installed in accordance with all relevant regulations in force within your new country of residence.
The provisions of this European Guarantee do not affect any of the rights granted to you by law.
Belgien Česká republika +420 2 61 12 61 12Budějovická 3, Praha 4, 140 21
Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Fredericia Deutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429 Nürnberg Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 Tallinn