Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed
with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great
results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH3
1.
SAFETY INSTRUCTIONS
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• This appliance can be used by children
aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction for the operation of the appliance by a person who is
responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the
appliance when it operates or when it
cools down. Accessible parts are hot.
• If the appliance has a child safety device, we recommend that you activate
it.
• Cleaning and user maintenance shall
not be made by children without supervision.
1.2 Installation
WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Contact the Service or an electrician to
change a damaged mains cable.
• Do not let mains cables to come in
touch with the appliance door, specially
when the door is hot.
• The shock protection of live and insulated parts must be fastened in such a
way that it cannot be removed without
tools.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you disconnect the appliance from the mains at all
poles. The isolation device must have a
www.electrolux.com
4
• Fully close the appliance door, before
1.3 Use
• Use this appliance in a household envi-
• Do not change the specification of this
• Make sure that the ventilation openings
• Do not let the appliance stay unatten-
• Deactivate the appliance after each
• Internally the appliance becomes hot
• Be careful, when you open the appli-
• Do not operate the appliance with wet
• Do not apply pressure on the open
• Do not use the appliance as a work
• Always keep the appliance door closed
• Open the appliance door carefully. The
• Do not let sparks or open flames to
• Do not put flammable products or items
• To prevent damage or discoloration to
contact opening width of minimum 3
mm.
you connect the mains plug to the
mains socket.
WARNING!
Risk of injury, burns or electric
shock or explosion.
ronment.
appliance.
are not blocked.
ded during operation.
use.
when in operation. Do not touch the
heating elements that are in the appliance. Always use oven gloves to remove or put in accessories or ovenware.
ance door while the appliance is in operation. Hot air can release.
hands or when it has contact with water.
door.
surface or as a storage surface.
when the appliance is in operation.
use of ingredients with alcohol can
cause a mixture of alcohol and air.
come in contact with the appliance
when you open the door.
that are wet with flammable products
in, near or on the appliance.
WARNING!
Risk of damage to the appliance.
the enamel:
– Do not put ovenware or other objects
in the appliance directly on the bottom.
– Do not put aluminium foil directly on
the bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in
the appliance after you finish the cooking.
– be careful when you remove or install
the accessories.
• Discoloration of the enamel has no effect on the performance of the appliance. It is not a defect in the sense of
the warranty law.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be permanent.
Steam Cooking
WARNING!
Risk of burns and damage to the
appliance.
• Do not open the appliance door during
steam cooking. Steam can release.
1.4 Care and Cleaning
WARNING!
Risk of injury, fire or damage to
the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug
from the mains socket.
• Make sure the appliance is cold. There
is the risk that the glass panels can
break.
• Replace immediately the door glass
panels when they are damaged. Contact the Service.
• Be careful when you remove the door
from the appliance. The door is heavy!
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Remaining fat or food in the appliance
can cause fire.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety instructions on the packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of detergent.
Pyrolytic cleaning
WARNING!
Risk of fire and burns.
ENGLISH5
the high temperature Pyrolytic cleaning
operation of all Pyrolytic Ovens and can
be also a source for low level harmful
fumes.
• Fumes released from all Pyrolytic
Ovens / Cooking Residues as described are not harmful to humans, including infants or persons with medical conditions.
• Read carefully all the instructions for
Pyrolytic cleaning.
• Keep children away from the appliance
while the Pyrolytic cleaning is in operation. The appliance becomes very hot.
• Provide good ventilation during and after each Pyrolytic cleaning.
• Provide good ventilation during and after the first use at maximum temperature operation.
• Remove any pets (especially birds) from
the vicinity of the appliance location
during and after the Pyrolytic cleaning
and first use maximum temperature operation to a well ventilated area.
• Some birds and reptiles can be extremely sensitive to potential fumes
emitted during the cleaning process of
all Pyrolytic Ovens.
• Small pets can also be highly sensitive
to the localized temperature changes in
the vicinity of all Pyrolytic Ovens when
the Pyrolytic self cleaning program is in
operation.
• Non-stick surfaces on pots, pans,
trays, utensils etc., can be damaged by
1.5 Internal light
• The type of light bulb or halogen lamp
used for this appliance, is only for
household appliances. Do not use it for
house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same specifications.
1.6 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
www.electrolux.com
6
2. PRODUCT DESCRIPTION
12
12
5
4
3
11
2
1
10
9
8
Electronic programmer
1
Water drawer
2
Socket for the core temperature sen-
3
sor
Grill
4
Oven lamp
5
Fan
6
7
Shelf support, removable
7
Draining pipe
8
Water outlet valve
9
Rating plate
3
4
5
6
10
Shelf positions
11
Steam inlet
12
2.1 Oven accessories
• Wire shelf
For cookware, cake tins, roasts.
Baking tray
•
For cakes and biscuits.
Grill- / Roasting pan
•
To bake and roast or as pan to collect
fat.
Core temperature sensor
•
To measure how far the food is cooked.
Telescopic runners
•
For shelves and trays.
3. BEFORE FIRST USE
WARNING!
Refer to "Safety information"
chapter.
3.1 Initial cleaning
• Remove all accessories and removable
shelf supports (if applicable).
• Clean the appliance before first use.
Refer to the chapter "Care and
cleaning".
3.2 First connection
When you connect the appliance to the
mains, or after a power cut, you must set
the language, display contrast, display
brightness and time of day.
1.
Touch or to set the value.
2.
Touch OK to confirm.
3.3 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1.
Set the function and the maximum
temperature.
2.
Let the appliance operate for 45 minutes.
3.
Set the function and the maximum
temperature.
4.
Let the appliance operate for 15 mi-
nutes.
Accessories can become hotter than usually. The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow is sufficient.
4. CONTROL PANEL
Electronic programmer
110
2438 956 7
Use the sensor fields to operate the appliance
Number
1
2
3
4
5
6
Sensor
field
ENGLISH7
11
FunctionComment
On / offTo activate and deactivate the appli-
ance.
Heating Functions or Assisted Cooking
To choose a heating function or an Assisted Cooking function. To have access to the necessary function, touch
the field once or twice when the appliance is activated. To activate or deactivate the light, touch the field for 3 seconds.
Home keyTo go back one level in the menu. To
show the main menu, touch the field for
3 seconds.
Temperature
selection
To set the temperature or show the current temperature in the appliance. To
activate or deactivate the Fast Heat Up
function, touch the field for 3 seconds.
Favourite Programme
To save and have access to your favourite programmes.
Up keyTo move up in the menu.
7
Down keyTo move down in the menu.
Time and additional functions
To set different functions. When a heating function operates, touch the sensor
field to set the timer, Child Safety, Fa-
8
vourite Programme memory, Heat +
Hold or Set + Go or to change the settings of the core temperature sensor
(for selected models only).
9
10
Minute MinderTo set the Minute Minder .
OKTo confirm the selection or setting.
www.electrolux.com
8
A
Sensor
field
—
FunctionComment
DisplayShows the current settings of the appli-
BC
Number
11
Display
DE
Other indicators in the display
SymbolFunction
Minute MinderThe function operates.
Time of dayThe display shows the time of day.
DurationThe display shows the necessary time for cook-
ing.
End TimeThe display shows when the cooking time is
completed.
Time IndicationThe display shows how long a heating function
operates. Press
have the time go back to zero.
Heat-up indicatorThe display shows the temperature in the appli-
ance.
Fast Heat Up indicator
The function operates. This function decreases
the heat-up time.
Weight AutomaticThe display shows that the automatic weight
system operates or that you can change the
weight.
Heat + HoldThe function operates.
ance.
A)
Heating function
B)
Time of day
C)
Heat-up indicator
D)
Temperature
E)
Duration and End Time functions
and at the same time to
5. DAILY USE
WARNING!
Refer to "Safety information"
chapter.
5.1 Navigating the menus
Operation of the menus:
1.
Activate the appliance.
2.
Press or to select the menu
option.
3.
Press OK to move to submenu or ac-
cept setting.
At every point you can get back to the
main menu with
5.2 The menus in overview
Main menu
Symbol Menu itemApplication
Heating FunctionsContains a list of heating functions.
Assisted Cooking
Favourite Programme
PyrolysisPyrolytic cleaning.
Basic SettingsYou can use it to set other settings.
Specials
Submenus for: Basic Settings
Symbol SubmenuDescription
Set Time of DaySets the current time on the clock.
Time Indication
SET + GO
Heat + Hold
Extra timeActivates and deactivates the function.
Contains a list of automatic cooking programmes.
Contains a list of favourite cooking programmes created by the user.
Contains a list of additional heating functions.
When ON, the display shows the current
time when you deactivate the appliance.
When ON, you can choose the SET + GO
function in the Select Options window.
When ON, you can choose the Heat + Hold
function in the Select Options window.
ENGLISH9
Display ContrastAdjusts the display contrast by degrees.
Display BrightnessAdjusts the display brightness by degrees.
Set LanguageSets the language for the display.
Buzzer Volume
Key Tones
Adjusts the volume of press-tones and signals by degrees.
Activates and deactivates the tone of the
touch fields.
Alarm/Error TonesActivates and deactivates the alarm tones.
Cleaning AssistantGuides you through the cleaning procedure.
Cleaning ReminderReminds you when to clean the appliance.
Service
Shows the software version and configuration.
Factory SettingsResets all settings to factory settings.
www.electrolux.com
10
5.3 Heating functions
Submenu for: Heating Functions
Heating functionApplication
True Fan CookingTo bake maximum on three shelf positions at
the same time. When you use this function,
decrease the oven temperature by 20 - 40 °C
from the standard temperatures you use for
Conventional Cooking .
True Fan + SteamTo steam dishes. Use this function to de-
crease the length of the cooking time and to
preserve the vitamins and nutrients in the
food. To use, select the function and set the
temperature between 130 °C to 230 °C.
Pizza SettingTo cook pizza, quiche or pie with steam.
Conventional CookingTo bake and roast on one level.
Slow CookTo prepare especially tender, succulent
roasts.
Bottom HeatTo bake cakes with crispy or crusty bottoms
and to preserve food.
ECO RoastingThe ECO functions let you optimize the ener-
gy consumption during cooking. It is necessary to set the cooking time first.
Frozen FoodsTo make convenience food such as chips,
wedges or spring rolls crispy.
GrillingTo grill flat food in the middle of the grill and
to toast bread.
Fast GrillingTo grill flat food in large quantities and to
toast bread.
Turbo GrillingTo roast larger meat joints or poultry with
bones on one shelf position. Also to gratinate
and to brown.
Steam RegeneratingTo reheat already cooked food directly on a
plate.
Submenu for: Specials
Heating functionApplication
Bread BakingTo bake bread with steam.
Heating functionApplication
Au GratinTo prepare dishes such as lasagna or pota-
to gratin. Also to gratinate and to brown.
Dough ProvingTo raise the yeast dough before baking.
Plate WarmingTo preheat a plate for serving.
ENGLISH11
PreservingTo preserve vegetables in glasses and liquid
DryingTo dry sliced fruit such as apples, plums or
Keep WarmTo keep cooked food warm.
DefrostTo defrost frozen food.
5.4 Activating a heating function
1.
Activate the appliance.
2.
Select the Heating Functions menu.
Press OK to confirm.
3.
Set the heating function. Press OK to
confirm.
4. Set the temperature. Press OK to
confirm.
Press once or twice to go directly to the Heating Functions
menu (when the appliance is activated).
5.5 Steam cooking
The water drawer cover is in the
control panel.
1.
Press the cover to open the water
drawer.
2.
Fill the water drawer with 900 ml of
water.
The water supply is sufficient for approximately 55 - 60 minutes.
Do not put water directly into the
steam generator.
Use only water. Do not use filtered
(demineralised) or distilled water.
Do not use other liquids. Do not
put flammable or alcoholic liquids
into the water drawer.
(e.g. mixed pickles).
peaches and vegetables such as tomatoes,
zucchini or mushrooms.
3.
Push the water drawer to its initial po-
sition.
4.
Activate the appliance.
5.
Prepare the food in the correct cook-
ware.
6.
Select the steam heating function and
temperature.
7.
If necessary, set the function Duration
or End Time .
The signal sounds at the end of the
cooking time.
8.
Deactivate the appliance.
Let the appliance dry fully with the
door open.
9.
Empty the water tank after the steam
cooking is completed.
WARNING!
Wait a minimum of 60 minutes after each use of the steam cooking
in order to prevent hot water from
exiting the water outlet valve.
5.6 Tank Empty indicator
The display shows Water required and an
acoustic signal sounds when the tank is
empty and must be refilled.
For more information refer to "Steam
Cooking".
www.electrolux.com
12
5.7 Tank Full indicator
When the display shows Water tank full ,
you can use the steam cooking.
An acoustic signal sounds when the tank
is full.
5.8 Emptying the water tank
1.
2.
3.
4.
5.
If you put too much water into
the tank, the safety outlet
moves the excess water to the
bottom of the oven.
Remove the water with a sponge
or cloth.
Make sure that the appliance is
cool before you start to empty the
water tank.
Prepare the draining pipe (C), included in the same package with the
user manual. Put the connector (B)
onto one of the ends of the draining
pipe.
A
B
C
Put the second end of the draining
pipe (C) into a container. Put it at a
lower position than the outlet valve
(A).
Open the oven door and put the connector (B) into the outlet valve (A).
Push the connector again and again
when you empty the water tank.
Remove the connector from the valve
when the water stops flowing.
WARNING!
Do not use the drained water to fill
the water tank again.
The tank can have some water
when the display shows Water required . Wait until the water flow
from the water outlet valve stops.
5.9 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
5.10 Fast Heat Up indicator
This function decreases the heat-up time.
To activate the function, hold
onds. You will see the heat-up indicator
alternates.
for 3 sec-
5.11 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
5.12 Energy saving
The appliance contains features which help you save energy during everyday cooking:
Residual heat:
•
– When the heating function or pro-
gramme operates, the heating elements are deactivated 10 % earlier
(the lamp and fan continue to operate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
– When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temperature.
• Cooking with the lamp off - Touch
and hold
vate the lamp during cooking.
• Eco functions - refer to " Heating
Functions ".
for 3 seconds to deacti-
6. CLOCK FUNCTIONS
6.1 Clock functions
SymbolFunctionDescription
Minute Minder
Duration
End Time
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions Duration
the appliance deactivates the
heating elements after 90 % of the
set time. The appliance uses the
residual heat to continue the
cooking procedure until the time
ends (3 - 20 minutes).
Setting the clock functions
1.
Set a heating function.
2.
Press again and again until the
display shows the necessary clock
function and the related symbol.
3.
Press or to set the necessary
time. Press OK to confirm.
When the time ends, an acoustic signal sounds. The appliance deactivates. The display shows a message.
4.
Press a sensor field to stop the signal.
and End Time ,
ENGLISH13
To set a countdown (max 2 h 30 min). This function
has no effect on the operation of the appliance. You
can also activate it when the appliance is off. Use
to activate the function. Press or to set the
minutes and OK to start.
To set how long the appliance has to be in operation (max. 23 h 59 min).
To set the switch-off time for a heating function
(max. 23 h 59 min).
•
With Duration
Time
heating function and the temperature first. Then you can set
the clock function. The appliance deactivates automatically.
•
You can use Duration
End Time
if you want to automatically activate and deactivate the appliance at a given time later.
• When you use the Core temperature sensor (if applicable),
the Duration
you must set the
functions do not operate.
and End
and
at the same time
and End Time
6.2 Heat + Hold
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It activates after the baking or roasting procedure ends.
• You can activate or deactivate
the function in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more
than 80 °C.
– The function Duration is set.
Activating the function
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
www.electrolux.com
14
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic signal sounds.
The Heat + Hold function operates for 30
minutes.
The Heat + Hold function stays on if you
change the heating functions.
6.3 Extra Time
The Extra Time function makes the heating function continue after the Duration
ends.
7. AUTOMATIC PROGRAMMES
• Applicable for all heating functions with
Duration or Weight Automatic.
• Not applicable for heating functions
with CT Sensor .
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sensor field.
2.
The display shows the message for
Extra Time for five minutes.
3.
Press to activate (or to cancel).
4.
Set the length of the Extra Time .
Press OK to confirm.
7.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. Recipes are fixed and you cannot change them.
Activating the function:
1.
Activate the appliance.
2.
Select the Assisted Cooking menu.
Press OK to confirm.
3.
Select the category and dish. Press
OK to confirm.
4.
Select Recipe Automatic . Press OK
to confirm.
When you use the Manual function, the appliance uses automatic
settings. You can change them as
with other functions.
7.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
Activating the function:
1.
Activate the appliance.
2.
Select Assisted Cooking . Press OK
to confirm.
3.
Select the category and dish. Press
OK to confirm.
4.
Select the Weight Automatic . Press
OK to confirm.
5.
Touch or to set the food
weight. Press OK to confirm.
The automatic programme starts. You
can change the weight at any time. Press
or to change the weight. When
the time ends, an acoustic signal sounds.
Press a sensor field to deactivate the signal.
With some programmes turn over
the food after 30 minutes. The
display shows a reminder.
8. USING THE ACCESSORIES
WARNING!
Refer to "Safety information"
chapter.
8.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature.
• The core temperature.
Only use the core temperature
sensor supplied with the appliance or genuine replacement
parts.
1.
Put the tip of the core temperature
sensor into the centre of the meat.
2.
Activate the appliance.
3.
Put the core temperature sensor plug
into the socket on the front of the appliance.
The display shows the core temperature sensor symbol.
ENGLISH15
4.
Press or in less than 5 seconds to set the core temperature.
5.
Set the oven function and, if necessary, the oven temperature.
The appliance calculates an approximate end time. The end time is different for different quantities of food, the
set oven temperature (minimum 120
°C) and the operating mode. The appliance calculates the end time in approximately 30 minutes.
6.
Make sure that the core temperature
sensor stays in the meat and in the
core temperature sensor socket during the cooking.
7.
If necessary, you can set a new core
temperature during the cooking. To
do this, touch
8.
When the meat is at the set core tem-
.
perature, an acoustic signal sounds.
The appliance deactivates automatically.
Touch a sensor field to stop the signal.
9.
Remove the core temperature sensor
plug from the socket . Remove the
meat from the appliance.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and plug of the core temperature
sensor.
8.2 Telescopic runners
°C
1.
Pull out the right and left hand telescopic runners.
www.electrolux.com
16
°C
2.
Put the wire shelf on the telescopic
runners and carefully push them into
the appliance.
Make sure you push back the telescopic runners fully in the appliance
before you close the oven door.
Keep the installation instructions
for the telescopic runners for future use.
With telescopic runners you can put in
and remove the shelves more easily.
CAUTION!
Do not clean the telescopic runners in the dishwasher. Do not lubricate the telescopic runners.
B
8.3 Accessories for steam
cooking
The steam kit accessories are not
supplied with the appliance. For
more information, please contact
your local supplier.
The dietary baking dish for steam cooking
functions. The dish has two parts: a hole
for the injector (B) and a steel grill to put at
the bottom of the baking dish.
The injectors and rubber hose. “A” is the
rubber hose”, “B” is the injector for steam
cooking and “C” is the injector for direct
steam cooking.
BAC
Steam cooking in a dietary baking dish
Put the food onto the steel grill in the baking dish. Add some water. Put the injector
(B) into the rubber hose. Put the injector
(B) into the special hole in the dietary baking dish. Put the connector attached to
the rubber hose (A) into the steam inlet.
Put the baking dish onto the first or second shelf position from the bottom. Make
sure that you do not crush the rubber
hose or let it touch a heating element on
the top of the oven. Set the oven for the
steam cooking function.
Direct steam cooking
Put the food onto the steel grill in the baking dish. Add some water. Put the injector
(C) into the rubber hose. Put the connector attached to the rubber hose (A) into
the steam inlet.
ENGLISH17
Do not use the upper part of the
dish.
Be careful when you use the injectors
when the oven operates. Always use oven
When you cook food such as chicken,
duck, turkey, kid or large fish, put the injector (C) directly into the empty part of
the meat. Make sure that you do not
cause a blockage of the holes.
Put the baking dish onto the first or second shelf position from the bottom. Make
sure that you do not crush the rubber
hose or let it touch a heating element on
the top of the oven. Set the oven for the
steam cooking function.
For more information about steam cooking, refer to the cooking tables for steam
cooking.
The rubber hose is specially made
for cooking and does not contain
dangerous materials.
gloves to touch the injectors when the
oven is hot. Always remove the injectors
from the oven when you do not use a
steam function.
www.electrolux.com
18
9. ADDITIONAL FUNCTIONS
9.1 Favourite Programme menu
You can save your favourite settings, like
duration, temperature or heating function.
They are available in the Favourite Programme menu. You can save 20 programmes.
Saving a programme
1.
Activate the appliance.
2.
Set a heating function or an Assisted
Cooking function.
3.
Touch again and again until the
display shows SAVE . Press OK to
confirm.
4.
The display shows the first free memory position.
Press OK to confirm.
5.
Enter the name of the programme.
The first letter flashes.
Touch
Press OK.
6.
Touch or to move the cursor
to the right or to the left. Press OK.
The next letter flashes. Do steps 5
and 6 again as necessary.
7.
Press and hold OK to save.
• You can overwrite a memory position.
When the display shows the first free
memory position, touch
press OK to overwrite an existing programme.
• You can change the name of a pro-
gramme in the menu Edit Programme
Name .
Activating the programme
1.
Activate the appliance.
2.
Select the Favourite Programme
menu. Press OK to confirm.
3.
Select your favourite programme
name. Press OK to confirm.
Press
directly.
or to change the letter.
Useful information:
or and
to go to Favourite Programme
9.2 Function Lock
The Function Lock prevents an accidental
change of the heating function. You can
activate the Function Lock only when the
appliance operates.
Activating the Function Lock :
1.
Activate the appliance.
2.
Set a heating function or setting.
3.
Press again and again until the
display shows Function Lock.
4.
Press OK to confirm.
5.
The door locks and the symbol of a
key comes on in the display.
If the appliance has the Pyrolytic
cleaning function and the function
operates, the door is locked.
Deactivating the Function Lock :
1.
Press . The display shows a message.
2.
Press and then OK to confirm.
9.3 Child Lock
The Child Lock prevents an accidental
operation of the appliance .
Activating and deactivating the Child
Lock function:
1.
Activate the appliance.
2.
Touch and at the same time
until the display shows a message.
If the appliance has the Pyrolytic
cleaning function and the function
operates, the door is locked.
A message comes on in the display when you touch a sensor
field.
To unlock the appliance, touch
at the same time again until the display
shows a message.
and
9.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and use
it later with one press of the sensor field.
Activating the function:
1.
Activate the appliance.
2.
Set the heating function.
3.
Press again and again until the
display shows Duration .
4.
Set the time.
5.
Press again and again until the
display shows SET + GO .
6.
Press OK to confirm.
To start SET + GO , press any sensor field
(except for
starts.
When the heating function ends, an
acoustic signal sounds.
• When the heating function operates,
the Function Lock is on.
• You can activate and deactivate the
SET + GO function in the Basic Settings menu.
). The set heating function
Useful information:
9.5 Automatic switch-off
For safety reasons the appliance deactivates after some time:
• If an oven function operates.
• If you do not change the oven tempera-
ture.
ENGLISH19
Oven tempera-
Switch-off time
ture
30 °C - 120 °C12.5 h
120 °C - 200 °C8.5 h
200 °C - 250 °C5.5 h
250 °C - maxi-
3.0 h
mum °C
The automatic switch-off works
with all functions, except Light ,
Duration and End Time .
9.6 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you deactivate the appliance, the cooling fan
continues to operate until the temperature
in the appliance cools down.
9.7 Safety thermostat
Incorrect operation of the appliance or defective components can cause dangerous
overheating. To prevent this, the oven has
a safety thermostat which interrupts the
power supply. The oven activates again
automatically when the temperature
drops.
10. HELPFUL HINTS AND TIPS
• The appliance has five shelf levels.
Count the shelf levels from the bottom
of the appliance floor.
• The appliance has a special system
which circulates the air and constantly
recycles the steam. With this system
you can cook in a steamy environment
and keep the food soft inside and crusty outside. It decreases the cooking
time and energy consumption to a minimum.
• Moisture can condense in the appliance
or on the door glass panels. This is normal. Always stand back from the appliance when you open the appliance
door while cooking. To decrease the
condensation, operate the appliance for
10 minutes before cooking.
• Clean the moisture after each use of
the appliance.
• Do not put the objects directly on the
appliance floor and do not put aluminium foil on the components when you
cook. This can change the baking results and cause damage to the enamel.
10.1 Baking cakes
• Do not open the oven door before 3/4
of the set cooking time is up.
• If you use two baking trays at the same
time, keep one empty level between
them.
www.electrolux.com
20
10.2 Cooking meat and fish
• Use a deep pan for very fatty food to
prevent the oven from stains that can
be permanent.
• Leave the meat for approximately 15
minutes before carving so that the juice
does not seep out.
• To prevent too much smoke in the oven
during roasting, add some water into
the deep pan. To prevent the smoke
condensation, add water each time after it dries up.
10.3 Cooking times
Cooking times depend on the type of
food, its consistency, and volume.
Initially, monitor the performance when
you cook. Find the best settings (heat setting, cooking time, etc.) for your cookware, recipes and quantities when you
use this appliance.
10.4 Baking and roasting table
CAKES
Conventional
TYPE OF
DISH
Whisked
Cooking
Shelf
position
Temp
[°C]
21703 (2 and 4)16045 - 60In a cake
recipes
Shortbread
21703 (2 and 4)16020 - 30In a cake
dough
Buttermilk
1170216580 - 100In a 26 cm
cheesecake
Apple cake
21702 (left and
(Apple pie)
Strudel3175215060 - 80In a baking
Jam-tart21702 (left and
Sponge
2170215040 - 50In a 26 cm
cake
Christmas
2160215090 - 120In a 20 cm
cake / Rich
fruit cake
Plum cake1175216050 - 60
Small cakes
31703150 -
- one level
Small cakes
--2 and 4140 -
- two levels
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
16080 - 100In two 20 cm
right)
16530 - 40In a 26 cm
right)
160
150
Cooking
time
Notes
[min]
mould
mould
cake mould
cake moulds
on a wire
shelf
tray
cake mould
cake mould
cake mould
In a bread tin
20 - 30In a baking
1)
tray
25 - 35In a baking
1)
tray
1)
1)
1)
ENGLISH21
TYPE OF
DISH
Small cakes
- three levels
Biscuits /
pastry
Conventional
Cooking
Shelf
position
Temp
[°C]
--1, 3 and 5140 -
31403140 -
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
150
150
Cooking
time
Notes
[min]
30 - 45In a baking
1)
tray
25 - 45In a baking
tray
stripes - one
level
Biscuits /
pastry
--2 and 4140 150
35 - 40In a baking
tray
stripes - two
levels
Biscuits /
pastry
--1, 3 and 5140 150
35 - 45In a baking
tray
stripes three levels
Meringues one level
Meringues two levels
3120312080 - 100In a baking
tray
--2 and 412080 - 100In a baking
1)
tray
Buns3190319012 - 20In a baking
1)
tray
Eclairs - one
level
Eclairs - two
levels
3190317025 - 35In a baking
tray
--2 and 417035 - 45In a baking
tray
Plate tarts2180217045 - 70In a 20 cm
cake mould
Rich fruit
cake
Victoria
sandwich
1)
Preheat for 10 minutes.
11602150110 -
120
11702 (left and
16030 - 50In a 20 cm
right)
In a 24 cm
cake mould
cake mould
1)
BREAD AND PIZZA
TYPE OF
DISH
Conventional
Cooking
Shelf
position
Temp
[°C]
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
Cooking
time
[min]
Notes
White bread1190119060 - 701 - 2 pieces,
500 gr per
1)
piece
www.electrolux.com
22
TYPE OF
DISH
Conventional
Cooking
Shelf
position
Temp
[°C]
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
Cooking
time
[min]
Notes
Rye bread1190118030 - 45In a bread tin
Bread rolls21902 (2 and 4)18025 - 406 - 8 rolls in a
baking tray
Pizza1230 -
250
1230 -
250
10 - 20In a baking
tray or a deep
1)
pan
Scones3200319010 - 20In a baking
1)
tray
1)
Preheat for 10 minutes.
FLANS
TYPE OF
DISH
Conventional
Cooking
Shelf
position
Temp
[°C]
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
Cooking
time
[min]
Notes
Pasta flan2200218040 - 50In a mould
Vegetable
2200217545 - 60In a mould
flan
Quiches1180118050 - 60
Lasagne2180 -
190
Cannelloni2180 -
190
1)
Preheat for 10 minutes.
2180 -
190
2180 -
190
25 - 40
25 - 40
In a mould
In a mould
In a mould
1)
1)
1)
1)
MEAT
TYPE OF
DISH
Conventional
Cooking
Shelf
position
Temp
[°C]
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
Cooking
time
[min]
Notes
Beef2200219050 - 70On a wire shelf
Pork2180218090 - 120 On a wire shelf
Veal2190217590 - 120 On a wire shelf
English roast
Tarts217530 - 40In a 26 cm cake mould
Fruit cake216080 - 90In a 26 cm cake mould
Sponge cake216035 - 45In a 26 cm cake mould
Panettone2150 - 16070 - 100In a 20 cm cake
Plum cake216040 - 50
Small cakes3 (2 and 4)150 - 16025 - 30In a baking tray
Biscuits3 (2 and 4)15020 - 35In a baking tray
Sweet buns2180 - 20012 - 20
Brioches3 (2 and 4)18015 - 20
Cooking
time
[min]
Notes
1)
mould
1)
mould
In a bread tin
In a baking tray
In a baking tray
1)
1)
1)
www.electrolux.com
28
1)
FLANS
TYPE OF DISH
Vegetables filled1170 - 18030 - 40In a mould
Lasagne2170 - 18040 - 50In a mould
Potato gratin1 (2 and 4) 160 - 17050 - 60In a mould
MEAT
Roast pork1000218090 - 110On a wire shelf
Veal1000218090 - 110On a wire shelf
Roast beef1000
rare221045 - 50On a wire shelf
medium220055 - 65On a wire shelf
well done219065 - 75On a wire shelf
Lamb10002175110 - 130Leg
Chicken1000220055 - 65Whole
Turkey40002170180 - 240Whole
Duck2000 - 25002170 -
Roast veal75 - 80
Veal knuckle85 - 90
English roast beef, rare45 - 50
English roast beef, medium60 - 65
English roast beef, well done70 - 75
Shoulder of pork80 - 82
Shin of pork75 - 80
Lamb70 - 75
Chicken98
Hare70 - 75
Trout / Sea bream65 - 70
Tuna fish / Salmon65 - 70
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus,
we recommend that you cook at the
lowest temperatures and do not brown
food too much.
11. CARE AND CLEANING
WARNING!
Refer to "Safety information"
chapter.
• Clean the front of the appliance with a
soft cloth with warm water and a cleaning agent.
• To clean metal surfaces use a usual
cleaning agent.
• Clean the oven interior after each use.
Then you can remove dirt more easily
and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories after each
use and let them dry. Use a soft cloth
with warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dishwasher. It can destroy nonstick coating.
Stainless steel or aluminium
appliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials, as they can
cause damage to the oven surface. Clean the oven control panel
with the same precautions.
www.electrolux.com
32
11.1 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf supports
1.
Pull the front of the shelf support away
from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
1
2
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
The rounded ends of the shelf
supports must point to the front.
11.2 Pyrolysis
CAUTION!
If a hob is installed with the appliance, do not use it at the same
time as the Pyrolysis function. It
can cause damage to the appliance.
For steam models only: before
you start the cleaning procedure,
make sure that the water tank is
completely empty. Refer to “Emptying the water tank”.
Remove all accessories from the
appliance.
The cleaning procedure cannot start:
• If you do not remove the shelf support
runners or telescopic shelf runners (if
present).
• If you do not close the appliance door
correctly.
• If you do not unplug the core temperature sensor (if present).
When the Pyrolysis starts the appliance door is locked. After the
function finishes the door is
locked for the cool down phase.
Some of the appliance functions
are not available during the cool
down phase.
WARNING!
When the Pyrolysis finishes the
appliance is very hot. Let it cool
down. There is a risk of burns
Pyrolysis :
1.
Remove the worst of the residual dirt
manually.
2.
Activate the appliance and choose
the Pyrolysis function in the main
menu. Press OK to confirm.
3.
Set the length for the procedure:
– Quick - 1h for a low degree of dirt
– Normal - 1h 30 min for a usual de-
gree of dirt
– Intense - 2h 30 min for a high de-
gree of dirt
4.
Press OK to confirm.
11.3 Oven lamp
WARNING!
Be careful when you change the
oven lamp. There is a risk of electrical shock.
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or
deactivate the circuit breaker.
Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.
Always hold the halogen lamp
with a cloth to prevent grease residue from burning on the lamp.
ENGLISH33
1.
Turn the glass cover counterclockwise to remove it.
2.
Clean the glass cover.
3.
Replace the oven light bulb with an
applicable 300 °C heat-resistant oven
light bulb.
Use the same oven lamp type.
4.
Install the glass cover.
11.4 Cleaning the oven door
The oven door has four glass panels. You
can remove the oven door and the internal glass panels to clean them.
The oven door can close if you try
to remove the glass panels before
you remove the oven door.
Removing the oven door and the glass panel
1.
Fully open the door and identify the
hinge to the right side of the door.
2.
Push the tightening component until it
pulls back.
www.electrolux.com
34
3.
Hold the pushed component with
one hand. Use a screwdriver with the
other hand to lift and turn the right
side hinge lever.
4.
Identify the hinge to the left side of
the door.
5.
Lift and turn the levers on the two
hinges.
ENGLISH35
6.
Close the oven door to the first opening position (halfway). Then pull forward and remove the door from its
seat.
7.
Put the door on a soft cloth on a stable surface.
8.
Release the locking system to remove the glass panels.
90°
9.
Turn the two fasteners by 90° and remove them from their seats.
www.electrolux.com
36
Installing the door and the glass panels
10.
Carefully lift (step 1) and remove (step
2) the glass panels one by one. Start
from the top panel.
11.
Clean the glass panels with water
and soap. Dry the glass panels carefully.
2
1
AB C
11.5 Cleaning the water tank
WARNING!
Do not put water into the water
tank during the cleaning procedure.
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite sequence.
Make sure that you put the glass panels
(A, B and C) back in the correct sequence. The middle panel (B) has a decorative frame. The screen-printing zone
must face the inner side of the door.
Make sure that after the installation the
surface of the glass panel frame (B) on the
screen-printing zones is not rough when
you touch it.
Make sure that you install the top panel in
the seats correctly.
During the cleaning procedure,
some water can drip from the
steam inlet onto the cavity of the
oven. Put a dripping pan on the
shelf level directly below the
steam inlet to prevent water from
falling onto the bottom of the oven
cavity.
After some time, you can have lime deposits in your oven. To prevent this, clean
the parts of the oven that generate the
steam. Empty the tank after each steam
cooking.
1.
Fill in the water tank with 900 ml of
water and 50 ml of citric acid (five
teaspoons). Deactivate the oven and
wait for approximately 60 minutes.
2.
Activate the oven and set the True
Fan + Steam function. Set the temperature 230 °C. Deactivate it after 25
minutes and let it cool down for 15
minutes.
3.
Activate the oven and set the True
Fan + Steam function. Set the temperature between 130 and 230 °C.
Deactivate it after 10 minutes. Let it
cool down and continue with the removal of the tank contents (refer to
"Emptying the water tank").
4.
Rinse the water tank and clean the
remaining lime residue in the oven
with a cloth.
5.
Clean the drain pipe by hand in warm
water with soap. To prevent damage,
do not use acids, sprays or similar
cleaning agents.
Types of water
• Soft water with low lime content -
the manufacturer recommends this because it decreases the quantity of
cleaning procedures.
• Tap water - you can use it if your do-
mestic water supply has purifier or water sweetener.
• Hard water with high lime content -
it does not have an effect on the performance of the appliance but it increases the quantity of cleaning procedures.
CALCIUM QUANTITY TABLE INDICATED FROM W.H.O.
(World Health Organization)
Calcium de-
posit
Water hard-
ness
(French de-
grees)
Water hard-
ness
(German de-
grees)
Water classi-
fication
0 - 60 mgl0 - 60 - 3Sweet of soft
60 - 120 mgl6 - 123 - 7
120 - 180 mgl12 - 188 - 10
Medium hard-
ness
Hard or calca-
reous
over 180 mglover 18over 10Very hard
ENGLISH37
Run decalci-
fication ev-
ery
150 cycles -
2.5 months
100 cycles - 2
months
75 cycles - 1.5
months
60 cycles - 1
month
12. WHAT TO DO IF…
WARNING!
Refer to "Safety information"
chapter.
ProblemPossible causeRemedy
The appliance does
not heat up.
The appliance does
not heat up.
The appliance is deactiva-
Activate the appliance.
ted.
The clock is not set.Set the clock.
www.electrolux.com
38
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
There is water inside
the appliance.
The steam cooking
does not operate.
The steam cooking
does not operate.
It takes more than
three minutes to
empty the water
tank or the water
leaks from the
steam inlet opening.
Steam and condensation settle on the
food and in the appliance.
The display shows
F111.
The lamp does not
operate.
The display shows
“Demo”. The appliance does not heat
up. The fan does
not operate.
If you cannot find a solution to the problem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
ProblemPossible causeRemedy
The necessary settings are
not set.
Make sure that the settings
are correct.
The Child Lock is activated.Refer to "Deactivating the
Child Lock".
The fuse is released.Make sure that the fuse is
the cause of the malfunction. If the fuse releases
again and again, contact an
authorized electrician.
There is too much water in
the tank.
Deactivate the appliance
and remove the water with a
cloth or sponge.
There is no water in the
Fill the water tank.
tank.
Lime obstructs the hole.Check the steam inlet open-
ing. Remove the lime.
There are lime deposits in
the appliance.
Check the water tank. Refer
to “Cleaning the water
tank”.
You left the dish in the appliance for too long.
Do not keep the dishes in
the appliance for longer
than 15 — 20 minutes after
the cooking ends.
You did not correctly install
the CT Sensor into the
socket.
Put the plug of core temperature sensor as far as possible into the socket.
The lamp is defective.Replace the lamp.
The test mode is activated.
1.
Deactivate the appliance.
2.
Touch and hold until
the appliance activates
and deactivates.
3.
Touch and hold and
at the same time until an acoustic signal
sounds and “d” goes
out.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
Model (MOD.).........................................
Product number (PNC).........................................
Serial number (S.N.).........................................
13. INSTALLATION
WARNING!
Refer to "Safety information"
chapter.
ENGLISH39
13.1 Building In
558
573
min. 550
20
590
min. 560
min. 550
20
600
548
20
589
min. 560
A
B
594
5
13.2 Electrical installation
WARNING!
Only a qualified person must do
the electrical installation.
The manufacturer is not responsible if you do not follow the safety
precautions from the chapter
"Safety Information".
This appliance is supplied with a main
plug and a main cable.
13.3 Cable
Cable types applicable for installation or
replacement: H07 RN-F, H05 RN-F, H05
RRF, H05 VV-F, H05 V2V2-F (T90), H05
BB-F.
For the section of the cable refer to the
total power (on the rating plate) and to the
table:
www.electrolux.com
40
Total power
Section of the ca-
ble
maximum 1380W3 x 0.75 mm²
maximum 2300W3 x 1 mm²
14. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
Total power
Section of the ca-
ble
maximum 3680W3 x 1.5 mm²
The hearth cord (green / yellow cable)
must be 2 cm longer than phase and neutral cables (blue and brown cables).
and electronic appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
Vielen Dank, dass Sie sich für ein Electrolux Gerät entschieden haben. Sie haben ein Produkt
gewählt, hinter dem eine jahrzehntelange professionelle Erfahrung und Innovation steht. Bei der
Entwicklung dieses großartigen und eleganten Geräts haben wir an Sie gedacht. So haben Sie
bei jedem Gebrauch die Gewissheit, dass Sie stets großartige Ergebnisse erzielen werden.
Willkommen bei Electrolux.
Besuchen Sie uns auf unserer Website, um:
Anwendungshinweise, Prospekte, Fehlerbehebungs- und Service-Informationen zu
erhalten:
www.electrolux.com
Ihr erworbenes Produkt zu registrieren, um den besten Service dafür zu gewährleisten:
www.electrolux.com/productregistration
Zubehör, Verbrauchsmaterial und Original-Ersatzteile für Ihr Gerät zu erwerben:
www.electrolux.com/shop
KUNDENDIENST UND -BETREUUNG
Bitte verwenden Sie ausschließlich Original-Ersatzteile für Ihre Produkte.
Halten Sie folgende Angaben bereit, wenn Sie sich an den Kundendienst wenden
(diese Informationen finden Sie auf dem Typenschild): Modell, Produktnummer (PNC),
Seriennummer.
Warnungs-/ Sicherheitshinweise.
Allgemeine Hinweise und Ratschläge
Hinweise zum Umweltschutz
Änderungen vorbehalten.
www.electrolux.com
42
1.
SICHERHEITSHINWEISE
Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine
Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße
Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf.
1.1 Sicherheit von Kindern und
schutzbedürftigen Personen
WARNUNG!
Es besteht Erstickungsgefahr. Risiko von Verletzungen oder permanenten Behinderungen.
• Dieses Gerät kann dann von Kindern ab
8 Jahren, von Personen mit eingeschränkten körperlichen, sensorischen
oder geistigen Fähigkeiten sowie von
Personen ohne bisherige Erfahrung im
Umgang mit solchen Geräten bedient
werden, wenn sie dabei beaufsichtigt
werden oder ihnen die Benutzung des
Geräts von einer Person erklärt wurde,
die für ihre Sicherheit verantwortlich ist.
• Kinder dürfen nicht mit dem Gerät spielen.
• Alle Verpackungsmaterialien von Kindern fernhalten.
• Halten Sie Kinder und Haustiere während des Betriebs oder der Abkühlphase vom Gerät fern. Zugängliche Teile
sind heiß.
• Falls Ihr Gerät mit einer Kindersicherung
ausgestattet ist, empfehlen wir, diese
zu einzuschalten.
• Reinigung und Wartung dürfen ohne
Beaufsichtigung nicht von Kindern
durchgeführt werden.
1.2 Montage
WARNUNG!
Nur eine qualifizierte Fachkraft darf
den Elektroanschluss des Geräts
vornehmen.
• Entfernen Sie das Verpackungsmaterial.
• Stellen Sie ein beschädigtes Gerät nicht
auf und benutzen Sie es nicht.
• Halten Sie sich an die mitgelieferte
Montageanleitung.
• Seien Sie beim Umsetzen des Geräts
vorsichtig, denn es ist schwer. Tragen
Sie stets Sicherheitshandschuhe.
• Ziehen Sie das Gerät nicht am Türgriff.
• Die Mindestabstände zu anderen Geräten und Küchenmöbeln sind einzuhalten.
• Stellen Sie sicher, dass das Gerät unterhalb von bzw. zwischen sicheren
Konstruktionen montiert wird.
• Die Seiten des Geräts dürfen nur an
Geräte oder Einheiten in gleicher Höhe
angrenzen.
Elektrischer Anschluss
WARNUNG!
Brand- und Stromschlaggefahr.
• Alle elektrischen Anschlüsse sind von
einem geprüften Elektriker vorzunehmen.
• Das Gerät muss geerdet werden.
• Stellen Sie sicher, dass die elektrischen
Daten auf dem Typenschild den Daten
Ihrer Stromversorgung entsprechen.
Wenden Sie sich andernfalls an eine
Elektrofachkraft.
• Das Gerät darf ausschließlich an eine
ordnungsgemäß installierte Schutzkontaktsteckdose angeschlossen werden.
• Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel.
• Achten Sie darauf, Netzstecker und
Netzkabel nicht zu beschädigen. Wenden Sie sich zum Austausch des beschädigten Netzkabels an den Kundendienst oder einen Elektriker.
• Achten Sie darauf, dass das Netzkabel
die Gerätetür nicht berührt, insbesondere wenn die Tür heiß ist.
• Alle Teile, die gegen direktes Berühren
schützen sowie die isolierten Teile müssen so befestigt werden, dass sie nicht
ohne Werkzeug entfernt werden können.
• Stecken Sie den Netzstecker erst nach
Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzste-
cker nach der Montage noch zugänglich ist.
• Falls die Steckdose lose ist, schließen
Sie den Netzstecker nicht an.
• Ziehen Sie nicht am Netzkabel, um das
Gerät von der Spannungsversorgung
zu trennen. Ziehen Sie dazu immer direkt am Netzstecker.
• Verwenden Sie immer die richtigen
Trenneinrichtungen: Überlastschalter,
Sicherungen (Schraubsicherungen
müssen aus dem Halter entfernt werden können), Fehlerstromschutzschalter und Schütze.
• Die elektrische Installation muss eine
Trenneinrichtung aufweisen, mit der Sie
das Gerät allpolig von der Stromversorgung trennen können. Die Trenneinrichtung muss mit einer Kontaktöffnungsbreite von mindestens 3 mm ausgeführt
sein.
• Schließen Sie die Gerätetür ganz, bevor
Sie den Netzstecker in die Steckdose
stecken.
1.3 Gebrauch
WARNUNG!
Es besteht Verletzungs-, Verbrennungs-, Stromschlag- oder Explosionsgefahr.
• Das Gerät ist für die Verwendung im
Haushalt vorgesehen.
• Nehmen Sie keine technischen Änderungen am Gerät vor.
• Die Lüftungsöffnungen dürfen nicht abgedeckt werden.
• Lassen Sie das Gerät bei Betrieb nicht
unbeaufsichtigt.
• Das Gerät nach jedem Gebrauch ausschalten.
• Während des Betriebs wird das Geräteinnere heiß. Berühren Sie nicht die
Heizelemente im Geräteinnern. Verwenden Sie zum Anfassen des Zubehörs
und der Töpfe wärmeisolierende Handschuhe.
• Gehen Sie beim Öffnen der Tür vorsichtig vor, wenn das Gerät in Betrieb ist.
Es kann heiße Luft austreten.
• Bedienen Sie das Gerät nicht mit feuchten oder nassen Händen oder wenn es
mit Wasser in Kontakt gekommen ist.
DEUTSCH43
• Üben Sie keinen Druck auf die geöffnete Gerätetür aus.
• Benutzen Sie das Gerät nicht als Arbeits- oder Abstellfläche.
• Halten Sie die Tür immer geschlossen,
wenn das Gerät in Betrieb ist.
• Öffnen Sie die Gerätetür vorsichtig.
Wenn Sie Zutaten mit Alkohol verwenden, kann ein Alkohol-Luftgemisch entstehen.
• Achten Sie beim Öffnen der Tür darauf,
dass keine Funken oder offenen Flammen in das Geräts gelangen.
• Platzieren Sie keine entflammbaren
Produkte oder Gegenstände, die mit
entflammbaren Produkten benetzt sind,
im Gerät, auf dem Gerät oder in der
Nähe des Geräts.
WARNUNG!
Das Gerät könnte beschädigt werden.
• Um Beschädigungen oder Verfärbungen der Emailbeschichtung zu vermeiden:
– Stellen Sie Kochgeschirr oder andere
Gegenstände nicht direkt auf den Boden des Gerätes.
– Legen Sie keine Alufolie direkt auf den
Boden des Gerätes.
– Stellen Sie kein Wasser in das heiße
Gerät.
– Lassen Sie nach dem Abschalten des
Geräts kein feuchtes Geschirr oder
feuchte Speisen im Backofeninnenraum
stehen.
– Gehen Sie beim Herausnehmen oder
Einsetzen der Innenausstattung sorgfältig vor.
• Verfärbungen der Emailbeschichtung
haben keine Auswirkung auf die Leistung des Geräts. Sie stellen keinen
Mangel im Sinne des Gewährleistungsrechtes dar.
• Verwenden Sie für feuchte Kuchen die
Brat- und Fettpfanne. Fruchtsäfte verursachen bleibende Flecken.
Dampfgaren
WARNUNG!
Andernfalls besteht Verbrennungsgefahr und das Gerät könnte beschädigt werden.
www.electrolux.com
44
• Öffnen Sie während des Dampfgarens
1.4 Reinigung und Pflege
• Schalten Sie vor Reinigungsarbeiten im-
• Vergewissern Sie sich, dass das Gerät
• Ersetzen Sie die Glasscheiben der Tür
• Gehen Sie beim Aushängen der Tür
• Reinigen Sie das Gerät regelmäßig, um
• Fett- oder Speisereste im Gerät können
• Reinigen Sie das Geräts mit einem wei-
• Falls Sie ein Backofenspray verwenden,
• Reinigen Sie die katalytische Emailbe-
Pyrolyse
• Lesen Sie die Anleitung zur Pyrolyse
• Halten Sie Kinder während der Pyrolyse
• Sorgen Sie während und nach der Py-
nicht die Gerätetür. Es kann heißer
Dampf austreten.
WARNUNG!
Risiko von Verletzungen, Brand
oder Beschädigungen am Gerät.
mer das Gerät aus und ziehen Sie den
Netzstecker aus der Steckdose.
abgekühlt ist. Zusätzlich besteht die
Gefahr, dass die Glasscheiben brechen.
umgehend, wenn sie beschädigt sind.
Wenden Sie sich hierzu an den Kundendienst.
sorgsam vor. Die Tür ist schwer!
eine Abnutzung des Oberflächenmaterials zu verhindern.
einen Brand verursachen.
chen, feuchten Tuch. Verwenden Sie
nur neutrale Reinigungsmittel. Benutzen
Sie keine Scheuermittel, scheuernde
Reinigungsschwämmchen, Lösungsmittel oder Metallgegenstände.
befolgen Sie bitte unbedingt die Anweisungen auf der Verpackung.
schichtung (falls vorhanden) nicht mit
Reinigungsmitteln.
WARNUNG!
Brand- und Verbrennungsgefahr.
sorgfältig durch.
vom Gerät fern. Das Gerät wird sehr
heiß.
rolyse für eine gute Belüftung.
• Sorgen Sie während des ersten Gebrauchs bei Verwendung der Höchsttemperatur für eine gute Belüftung.
• Halten Sie während und nach der Pyrolyse Tiere (besonders Vögel) vom Gerät
fern und stellen Sie die Höchsttemperatur erst ein, wenn der Bereich ausreichend gelüftet ist.
• Einige Vögel und Reptilien können sehr
empfindlich auf die während des Reinigungsvorgangs freigesetzten Dämpfe
der Pyrolyse-Backöfen reagieren.
• Kleine Tiere reagieren auch während
des laufenden Reinigungsprogramms
empfindlich auf die lokalen Temperaturschwankungen in der Nähe von Pyrolyse-Backöfen.
• Antihaftbeschichtungen auf Töpfen,
Pfannen, Blechen und Kochutensilien
usw. können durch die hohen Temperaturen während der Pyrolyse beschädigt werden und geringfügige Mengen
an schädlichen Dämpfen freisetzen.
• Diese von den Pyrolyse-Backöfen/Speiseresten freigesetzten Dämpfe sind ungefährlich für Menschen einschließlich
Kinder oder Personen mit Beschwerden.
1.5 Innenbeleuchtung
• Die Leuchtmittel in diesem Gerät sind
nur für Haushaltsgeräte geeignet. Benutzen Sie sie nicht für die Raumbeleuchtung.
WARNUNG!
Stromschlaggefahr.
• Trennen Sie das Gerät von der Stromversorgung, bevor Sie die Lampe austauschen.
• Verwenden Sie dazu eine Lampe mit
der gleichen Leistung.
1.6 Entsorgung
WARNUNG!
Verletzungs- und Erstickungsgefahr.
• Trennen Sie das Gerät von der Stromversorgung.
• Schneiden Sie das Netzkabel ab und
entsorgen Sie es.
• Entfernen Sie das Türschloss, um zu
verhindern, dass sich Kinder oder
Haustiere in dem Gerät einschließen.
2. GERÄTEBESCHREIBUNG
12
12
5
4
3
11
2
1
10
9
8
Elektronischer Programmspeicher
1
Wasserschublade
2
Buchse für den KT Sensor
3
Grill
4
Backofenlampe
5
Ventilator
6
7
Einhängegitter, herausnehmbar
7
Ablaufschlauch
8
Wasserauslassventil
9
Typenschild
3
4
5
6
10
Einschubebenen
11
Dampfeinlass
12
2.1 Backofenzubehör
• Kombirost
Für Geschirr, Kuchenformen, Braten.
Backblech
•
Für Kuchen und Plätzchen.
Brat- und Fettpfanne
•
Zum Backen und Braten oder zum Auf-
fangen von austretendem Fett.
KT Sensor
•
Zum Messen des Garzustands.
• Teleskopauszüge
Für Roste und Backbleche.
DEUTSCH45
3. VOR DER ERSTEN INBETRIEBNAHME
WARNUNG!
Siehe Kapitel „Sicherheitshinweise“.
3.1 Erste Reinigung
• Entfernen Sie alle Zubehörteile und die
herausnehmbaren Einhängegitter (falls
vorhanden).
• Reinigen Sie das Gerät vor der ersten
Inbetriebnahme.
Siehe Kapitel „Reinigung und Pflege“.
3.2 Erstanschluss
Nach dem Netzanschluss oder nach einem Stromausfall müssen die Sprache,
der Kontrast und die Helligkeit des Displays sowie die Uhrzeit eingestellt werden.
1.
Berühren Sie oder , um die
Option einzustellen.
2.
Berühren Sie zur Bestätigung OK.
3.3 Aufheizen
Heizen Sie das leere Gerät vor, um Fettreste zu verbrennen.
1.
Stellen Sie die Funktion und die
Höchsttemperatur ein.
2.
Lassen Sie das Gerät 45 Minuten
lang eingeschaltet.
3.
Stellen Sie die Funktion und die
Höchsttemperatur ein.
www.electrolux.com
46
4.
Lassen Sie das Gerät 15 Minuten
lang eingeschaltet.
Das Zubehör kann heißer werden als beim
normalen Gebrauch. Das Gerät kann Ge-
4. BEDIENFELD
Elektronischer Programmspeicher
110
Bedienen Sie das Gerät über die Sensorfelder.
Nummer
1
ruch und Rauch verströmen. Das ist normal. Sorgen Sie für eine ausreichende Belüftung.
2438 956 7
11
Sensor-
feld
FunktionBemerkung
An/AusEin- und Ausschalten des Geräts.
Ofenfunktionen
oder Koch-Assistent
Auswählen einer Ofenfunktion oder einer Koch-Assistent -Funktion. Zum
Auswählen der gewünschten Funktion
das Feld ein- oder zweimal berühren,
2
wenn das Gerät eingeschaltet ist. Zum
Ein- oder Ausschalten der Backofenbeleuchtung das Feld 3 Sekunden lang
berühren. Sie können die Backofenbeleuchtung auch einschalten, wenn das
Gerät ausgeschaltet ist.
Pos-1-TasteEine Ebene zurück im Menü. Berühren
3
Sie zur Anzeige des Hauptmenüs das
Feld 3 Sekunden.
Temperaturwahl Einstellung oder Anzeige der aktuellen
Temperatur im Gerät. Zum Ein- oder
4
Ausschalten der Funktion Schnellaufheizung das Feld 3 Sekunden lang berühren.
5
6
7
Bevorzugtes
Programm
Taste „Nach
oben“
Taste „Nach
unten“
Zum Speichern und Aufrufen der bevorzugten Programme.
Menünavigation nach oben.
Menünavigation nach unten.
DEUTSCH47
Nummer
Sensor-
feld
FunktionBemerkung
Uhrzeit und zusätzliche Funktionen
8
9
10
11
Display
—
A
Kurzzeit-Wecker
OKBestätigung der Auswahl oder Einstel-
DisplayAnzeige der aktuellen Einstellungen des
BC
DE
Weitere Anzeigen auf dem Display
SymbolFunktion
Kurzzeit-WeckerDie Funktion ist eingeschaltet.
TageszeitDas Display zeigt die Tageszeit an.
DauerDas Display zeigt die erforderliche Garzeit an.
EndeDas Display zeigt an, wann der Garvorgang ab-
geschlossen sein wird.
ZeitanzeigeDas Display zeigt an, wie lange eine Ofenfunkti-
on in Betrieb ist. Drücken Sie
zeitig, um diese Anzeige auf Null zu stellen.
Aufheiz-AnzeigeDas Display zeigt die Temperatur im Gerät an.
Kontrolllampe
Schnellaufheizung
Die Funktion ist eingeschaltet. Diese Funktion
verkürzt die Aufheizzeit.
Gewichtsautomatik Das Display zeigt an, dass die Gewichtsautoma-
tik in Betrieb ist oder dass Sie das Gewicht än-
dern können.
Heat + HoldDie Funktion ist eingeschaltet.
Einstellen verschiedener Funktionen.
Wenn eine Ofenfunktion in Betrieb ist,
berühren Sie das Sensorfeld, um die
Uhr, die Kindersicherung, Bevorzugtes
Programm , Heat + Hold oder Set + Go
einzustellen oder die Einstellungen des
Kerntemperatursensors zu ändern (nur
bei ausgewählten Modellen).
Einstellen des Kurzzeit-Wecker .
lung.
Geräts.
A)
Ofenfunktion
B)
Tageszeit
C)
Aufheiz-Anzeige
D)
Temperatur
E)
Funktionen Dauer und Ende
und gleich-
www.electrolux.com
48
5. TÄGLICHER GEBRAUCH
WARNUNG!
Siehe Kapitel „Sicherheitshinweise“.
5.1 Navigation in den Menüs
Bedienung der Menüs:
1.
Schalten Sie das Gerät ein.
2.
Drücken Sie oder , um die
Menüoption einzustellen.
3.
Drücken Sie OK, um das Untermenü
aufzurufen oder die Einstellung zu bestätigen.
Mit
zurück in das Hauptmenü springen.
5.2 Überblick über die Menüs
Hauptmenü
Symbol MenüpunktAnwendung
OfenfunktionenListe mit Ofenfunktionen.
Koch-AssistentListe mit automatischen Garprogrammen.
Bevorzugtes Programm
PyrolysePyrolytische Reinigung.
Einstellungen
Sonderfunktionen
Untermenüs von: Einstellungen
Symbol UntermenüBeschreibung
Tageszeit einstellenEinstellen der aktuellen Uhrzeit.
Zeitanzeige
SET + GO
Heat + Hold
ZeitverlängerungEin- und Ausschalten der Funktion.
Liste mit Ihren bevorzugten Garprogrammen.
Ermöglicht die Änderung weiterer Einstellungen.
Liste mit zusätzlichen Ofenfunktionen.
Steht diese Funktion auf AN, wird die aktuelle Uhrzeit angezeigt, sobald das Gerät
ausgeschaltet wird.
Bei AN können Sie die Funktion SET + GO
in diesem Untermenü wählen.
Bei AN können Sie die Funktion Heat +
Hold in diesem Untermenü wählen.
können Sie von jedem Punkt aus
KontrastEinstellen des Kontrastes der Anzeige.
HelligkeitEinstellen der Helligkeit der Anzeige.
Sprache einstellenEinstellen der Sprache für die Anzeige.
Lautstärke
Tastentöne
Einstellen der Lautstärke der Tastentöne
und Signale.
Ein- und Ausschalten der Töne der Sensorfelder.
Symbol UntermenüBeschreibung
AlarmsignaleEin- und Ausschalten der Alarmsignale.
ReinigungsassistentFührt Sie durch das Reinigungsverfahren.
Erinnerungsfunktionen
Service
Werkseinstellungen
Erinnert Sie daran, wenn das Gerät gereinigt
werden muss.
Anzeige der Softwareversion und Konfiguration.
Zurücksetzen aller Einstellungen auf die
Werkseinstellungen.
5.3 Ofenfunktionen
Untermenü von: Ofenfunktionen
OfenfunktionAnwendung
Heißluft mit Ringheizkörper
Heißluft mit DampfZum Dampfgaren von Speisen. Verwenden
PizzastufeZum Dampfgaren von Pizza, Quiche oder
Zum Backen auf bis zu drei Ebenen gleichzeitig. Wenn Sie diese Funktion einschalten, stellen Sie die Backofentemperatur um 20 - 40
°C niedriger ein als die Standardtemperatur,
die Sie bei Ober-/Unterhitze verwenden.
Sie diese Funktion, um die Garzeit zu verkürzen und die Vitamine und Nährstoffe in der
Nahrung zu erhalten. Um Sie zu nutzen, wählen Sie die Funktion und stellen Sie eine Temperatur von 130 °C bis 230 °C ein.
Pasteten.
DEUTSCH49
Ober-/UnterhitzeZum Backen und Braten auf einer Ebene.
Bio-GarenZum Zubereiten von besonders zarten und
saftigen Braten.
UnterhitzeZum Backen von Kuchen mit krossen Böden
und zum Einkochen von Lebensmitteln.
ÖKO BratenMit den ÖKO-Funktionen optimieren Sie den
Energieverbrauch beim Garen. Sie müssen jedoch zuerst die Gardauer festlegen.
TiefkühlgerichteZur Zubereitung knuspriger Fertiggerichte wie
Pommes frites, Kroketten oder Frühlingsrollen.
Grillstufe 1Zum Grillen flacher Lebensmittel in der Mitte
des Rostes und zum Toasten von Brot.
Grillstufe 2Zum Grillen flacher Lebensmittel in größeren
Mengen und zum Toasten von Brot.
www.electrolux.com
50
OfenfunktionAnwendung
Untermenü von: Sonderfunktionen
OfenfunktionAnwendung
HeißluftgrillenZum Braten größerer Fleischstücke oder von
Geflügel mit Knochen auf einer Einschubebene. Auch zum Gratinieren und Überbacken.
RegenerierenZum Aufwärmen bereits gekochter Speisen
direkt auf dem Teller.
Brot BackenZum Dampfgaren von Brot.
ÜberbackenFür Speisen wie Lasagne oder Kartoffelgra-
GärstufeZum Gehen lassen von Hefeteig vor dem
Teller wärmenZum Vorwärmen von Tellern vor dem Ser-
EinkochenZum Einkochen von Gemüse in Gläsern mit
DörrenZum Dörren von Obst und Gemüse in
WarmhaltenZum Warmhalten von bereits gekochten
AuftauenZum Auftauen gefrorener Lebensmittel.
5.4 Einschalten einer
Ofenfunktion
1. Schalten Sie das Gerät ein.
2.
Wählen Sie das Menü Ofenfunktionen . Mit OK bestätigen.
3. Wählen Sie die Ofenfunktion. Mit OK
bestätigen.
4.
Stellen Sie die Temperatur ein. Mit OK
bestätigen.
Drücken Sie einmal oder zweimal
, um direkt zum Menü Ofenfunktionen zu gelangen (sofern
das Gerät eingeschaltet ist).
5.5 Garen mit Dampf
Die Wasserschublade befindet
sich im Bedienfeld.
tin. Auch zum Gratinieren und Überbacken.
Backen.
vieren.
Flüssigkeit (z. B. Mixed Pickles).
Scheiben wie Äpfeln, Pflaumen, Pfirsichen
sowie Tomaten, Zucchini und Pilzen.
Gerichten.
1.
Drücken Sie auf den Deckel, um die
Schublade zu öffnen.
2.
Füllen Sie die Wasserschublade mit
900 ml Wasser.
Der Wasservorrat reicht für ca. 55 60 Minuten.
Füllen Sie kein Wasser direkt in
den Dampfgenerator.
Verwenden Sie nur Wasser. Verwenden Sie kein gefiltertes (entmineralisiertes) oder destilliertes
Wasser. Es dürfen keine anderen
Flüssigkeiten außer Wasser verwendet werden. Füllen Sie keine
brennbaren oder alkoholische
Flüssigkeiten in die Wasserschublade.
3.
Schieben Sie die Wasserschublade in
ihre ursprüngliche Position.
4.
Schalten Sie das Gerät ein.
5.
Bereiten Sie das Gericht in einem geeigneten Kochgeschirr zu.
6.
Wählen Sie die Dampfgarfunktion und
die Temperatur.
7.
Stellen Sie bei Bedarf die Funktion
Dauer
Am Ende der Garzeit ertönt ein akustischer Signalton.
8.
Schalten Sie das Gerät aus.
Lassen Sie das Gerät bei geöffneter
Gerätetür vollständig trocknen.
9.
Leeren Sie den Wassertank nach Abschluss des Dampfgarvorgangs.
oder Ende ein.
WARNUNG!
Warten Sie nach jedem Gebrauch
mindestens 60 Minuten, damit ein
Auslaufen von heißem Wasser aus
dem Wasserauslassventil vermieden wird.
5.6 Kontrolllampe „Wassertank
leer“
Das Display zeigt Wassertank leer an und
es ertönt ein akustisches Signal, wenn der
Tank leer und ein Wiederauffüllen erforderlich ist.
Weitere Informationen finden Sie im Abschnitt „Dampfgaren“.
5.7 Kontrolllampe „Wassertank
voll“
Wenn das Display Wassertank voll anzeigt, können Sie dampfgaren.
Bei vollem Wassertank ertönt ein akustisches Signal.
Wenn Sie zu viel Wasser in den
Tank füllen, leitet der Sicherheitsauslass das überschüssige Wasser in den Boden des
Backofens.
Nehmen Sie das Wasser mit einem Schwamm oder Tuch auf.
5.8 Entleeren des Wassertanks
Vergewissern Sie sich, dass das
Gerät abgekühlt ist, bevor Sie den
Wasserbehälter entleeren.
1.
Bereiten Sie den Ablaufschlauch (C)
vor, der sich im Beutel mit der Ge-
DEUTSCH51
brauchsanleitung befindet. Stecken
Sie das Anschlussstück (B) auf eines
der Enden des Ablaufschlauchs.
A
B
C
2.
Platzieren Sie das andere Ende des
Ablaufschlauchs (C) in einem Behälter. Der Behälter muss sich unterhalb
des Auslassventils (A) befinden.
3.
Öffnen Sie die Backofentür und stecken Sie das Anschlussstück (B) in
das Wasserauslassventil (A).
4.
Drücken Sie das Anschlussstück wiederholt in Richtung Ventil, während
Sie den Wasserbehälter leeren.
5.
Nehmen Sie das Anschlussstück vom
Ventil ab, wenn kein Wasser mehr
austritt.
WARNUNG!
Verwenden Sie das abgelassene
Wasser nicht zum Auffüllen des
Wasserbehälters.
Im Tank kann sich noch Wasser
befinden, obwohl das Display
Wassertank leer anzeigt. Warten
Sie, bis kein Wasser mehr aus
dem Wasserauslassventil fließt.
5.9 Aufheiz-Anzeige
Der Balken leuchtet im Display auf, sobald
Sie eine Ofenfunktion einschalten. Der
Balken zeigt an, dass die Temperatur ansteigt.
5.10 Kontrolllampe
Schnellaufheizung
Diese Funktion verkürzt die Aufheizzeit.
Zum Einschalten der Funktion halten Sie
www.electrolux.com
52
3 Sekunden lang gedrückt. Sie können
dann beobachten, wie sich die AufheizAnzeige verändert.
5.11 Restwärme
Das Display zeigt die Restwärme an, sobald Sie das Gerät ausschalten. Sie können die Restwärme zum Warmhalten der
Speisen benutzen.
5.12 Energiesparen
Das Gerät verfügt über Funktionen, mit deren Hilfe Sie beim
täglichen Kochen Energie sparen können:
Restwärme:
•
– Die Heizelemente werden bei laufen-
der Ofenfunktion/laufendem Pro-
6. UHRFUNKTIONEN
6.1 Uhrfunktionen
gramm 10 % vor dem Garzeitende
ausgeschaltet (die Lampe und der
Ventilator bleiben eingeschaltet). Diese Funktion kann nur für Programme
mit einer Gardauer ab 30 Minuten
oder mit den Uhrfunktionen ( Dauer ,
Ende ) verwendet werden.
– Nach dem Ausschalten des Geräts
kann die Restwärme für das Warmhalten von Speisen verwendet werden. Im Display wird die verbleibende
Temperatur angezeigt.
Kochen bei ausgeschalteter Back-
•
ofenbeleuchtung - Berühren Sie 3 Sekunden lang
leuchtung während des Garvorgangs
auszuschalten.
• Öko-Funktionen - schlagen Sie unter
„ Ofenfunktionen “ nach.
, um die Backofenbe-
SymbolFunktionBeschreibung
Zum Einstellen eines Countdowns (max. 2 Std. 30
Min.). Diese Funktion hat keine Auswirkung auf den
Gerätebetrieb. Sie können die Funktion auch ein-
Kurzzeit-Wecker
schalten, wenn das Gerät ausgeschaltet ist. Schalten Sie die Funktion mit
ein. Drücken Sie oder
, um die Minuten einzustellen, und OK zum
Starten.
Dauer
Ende
5 Sekunden nachdem Sie die Zeit für eine
Uhrfunktion eingestellt haben wird diese
Zeit heruntergezählt.
Bei der Auswahl der Uhrfunktionen Dauer
schaltet das Gerät die Heizelemente nach Ablauf von 90 % der
eingestellten Zeit aus. Mit der vorhandenen Restwärme wird der
Garvorgang fortgesetzt, bis die
eingestellte Zeit abgelaufen ist (3
bis 20 Minuten).
und Ende
Zum Einstellen der Betriebszeitdauer des Geräts
(max. 23 Std. 59 Min.).
Zum Einstellen der Abschaltzeit einer Ofenfunktion
(max. 23 Std. 59 Min.).
Einstellen der Uhrfunktionen
1.
Stellen Sie eine Ofenfunktion ein.
2.
Drücken Sie wiederholt, bis im
Display die gewünschte Uhrfunktion
und das entsprechende Symbol anzeigt werden.
3.
Drücken Sie oder , um die
gewünschte Zeit einzustellen. Mit OK
bestätigen.
Nach Ablauf der Zeit ertönt ein akustisches Signal. Das Gerät wird ausge-
schaltet. Das Display zeigt eine Meldung an.
4.
Berühren Sie ein Sensorfeld, um den
Signalton abzuschalten.
•
Für die Funktionen Dauer
und Ende müssen Sie zu-
erst die Ofenfunktion und die
Temperatur einstellen. Erst danach können Sie die Uhrfunktion einstellen. Das Gerät wird
automatisch ausgeschaltet.
• Sie können die Funktionen Dau und Ende gleich-
er
zeitig verwenden, wenn das
Gerät zu einem bestimmten
späteren Zeitpunkt automatisch
ein- und ausgeschaltet werden
soll.
• Bei Verwendung des KT Sen-
sors (falls verfügbar) können die
Funktionen Dauer
de
nicht eingestellt wer-
den.
und En-
6.2 Heat + Hold
Die Funktion Heat + Hold hält zubereitete
Speisen 30 Minuten bei 80 °C warm. Sie
wird nach Ablauf des Back- oder Bratvorgangs eingeschaltet.
• Sie können die Funktion im Me-
nü Einstellungen einschalten
und ausschalten.
• Voraussetzungen für die Funkti-
on:
– Die eingestellte Temperatur
beträgt mehr als 80 °C.
– Die Funktion Dauer ist einge-
stellt.
DEUTSCH53
Einschalten der Funktion
1.
Schalten Sie das Gerät ein.
2.
Wählen Sie die Ofenfunktion.
3.
Stellen Sie eine höhere Temperatur
als 80 °C ein.
4.
Drücken Sie wiederholt, bis im
Display Heat + Hold angezeigt wird.
Mit OK bestätigen.
Nach Ablauf der Funktion ertönt ein akustisches Signal.
Die Funktion Heat + Hold wird für 30 Minuten eingeschaltet.
Die Funktion Heat + Hold bleibt eingeschaltet, wenn Sie zu anderen Ofenfunktionen wechseln.
6.3 Zeitverlängerung
Die Funktion Zeitverlängerung lässt die
Ofenfunktion nach Ablauf der Dauer eingeschaltet.
• Anwendbar auf allen Ofenfunktionen mit
Dauer oder Gewichtsautomatik.
• Nicht anwendbar auf Ofenfunktionen
mit KT Sensor .
Einschalten der Funktion:
1.
Nach Ablauf der Garzeit ertönt ein
Signal. Berühren Sie ein Sensorfeld.
2.
Das Display zeigt die Meldung Zeitverlängerung fünf Minuten an.
3.
Drücken Sie zur Bestätigung (oder
zum Abbrechen).
4.
Stellen Sie die Dauer der Zeitverlängerung ein. Mit OK bestätigen.
7. AUTOMATIKPROGRAMME
7.1 Koch-Assistent mit
Rezeptautomatik
Das Gerät stellt eine Reihe von Rezepten
zur Verfügung, die Sie verwenden können. Die Rezepte sind fest einprogrammiert und können nicht geändert werden.
Einschalten der Funktion:
1.
Schalten Sie das Gerät ein.
2.
Wählen Sie das Menü Koch-Assistent . Mit OK bestätigen.
3.
Wählen Sie die Kategorie und die
Speise. Mit OK bestätigen.
4.
Wählen Sie Rezeptautomatik . Mit OK
bestätigen.
www.electrolux.com
54
Wenn Sie die Funktion Manuell
verwenden, benutzt das Gerät automatische Einstellungen. Diese
können Sie ändern. Gehen Sie dazu wie für andere Funktionen beschrieben vor.
7.2 Koch-Assistent mit
Gewichtsautomatik
Bei dieser Funktion wird die Gardauer automatisch berechnet. Dazu muss das Gewicht des Garguts eingegeben werden.
Einschalten der Funktion:
1.
Schalten Sie das Gerät ein.
2.
Wählen Sie Koch-Assistent . Mit OK
bestätigen.
3.
Wählen Sie die Kategorie und die
Speise. Mit OK bestätigen.
4.
5.
Das Automatikprogramm startet. Sie können das Gewicht jederzeit ändern. Drü-
cken Sie dazu
der Zeit ertönt ein akustisches Signal.
Drücken Sie ein Sensorfeld, um es abzuschalten.
8. VERWENDUNG DES ZUBEHÖRS
WARNUNG!
Siehe Kapitel „Sicherheitshinweise“.
Wählen Sie Gewichtsautomatik . Mit
OK bestätigen.
Berühren Sie oder , um das
Gewicht des Garguts einzustellen. Mit
OK bestätigen.
oder . Nach Ablauf
Bei einigen Programmen muss
das Gargut nach 30 Minuten gewendet werden. Im Display wird
eine Erinnerungsmeldung angezeigt.
8.1 KT Sensor
Der KT Sensor misst die Temperatur im
Inneren des Fleisches. Das Gerät wird
ausgeschaltet, sobald das Fleisch die eingestellte Temperatur erreicht hat.
Zwei Temperaturen sind einzustellen:
• Die Backofentemperatur
• Die Kerntemperatur
Verwenden Sie nur den mitgelie-
ferten KT Sensor oder ein Originalersatzteil.
1.
Führen Sie die Spitze des KT Sensors
mittig in das vorbereitete Fleischstück
ein.
2.
Schalten Sie das Gerät ein.
3.
Stecken Sie den Stecker des KT Sensors in die Buchse an der Vorderseite
des Geräts.
Im Display wird das Symbol für den
KT Sensor angezeigt.
4.
Drücken Sie innerhalb von weniger als
5 Sekunden
Kerntemperatur einzustellen.
5.
Stellen Sie die Backofenfunktion ein
und, falls notwendig, die Backofentemperatur.
Das Gerät berechnet das voraussichtliche Ende. Der ermittelte Wert variiert
je nach Speisemenge, eingestellter
Backofentemperatur (mindestens 120
°C) und ausgewählter Funktion. Das
oder , um die
voraussichtliche Ende wird nach ca.
30 Minuten berechnet.
6.
Stellen Sie sicher, dass der KT Sensor während des gesamten Garvorgangs im Fleisch und in der Buchse
verbleibt.
7.
Gegebenenfalls können Sie während
des Garvorgangs eine neue Kerntemperatur einstellen. Hierzu berühren Sie
.
8.
Sobald das Fleisch die eingestellte
Kerntemperatur erreicht hat, ertönt
ein akustisches Signal. Das Gerät
wird automatisch ausgeschaltet.
8.2 Auszüge
°C
DEUTSCH55
Berühren Sie ein Sensorfeld, um den
Signalton abzuschalten.
9.
Ziehen Sie den Stecker des Kerntemperatursensors aus der Buchse. Nehmen Sie das Fleischstück aus dem
Gerät.
WARNUNG!
Der KT Sensor ist heiß. Es besteht
Verbrennungsgefahr! Seien Sie
vorsichtig, wenn Sie die Spitze
des KT Sensors herausnehmen
und den Stecker ziehen.
1.
Ziehen Sie den rechten und den linken Auszug heraus.
°C
Bewahren Sie die Montageanleitung der Auszüge für die zukünftige Verwendung auf.
VORSICHT!
Reinigen Sie die Auszüge nicht im
Geschirrspüler. Ölen oder fetten
Sie die Auszüge nicht.
2.
Setzen Sie den Kombirost auf die
Auszüge, und schieben Sie diese
vorsichtig in das Gerät.
Vergewissern Sie sich, dass Sie die
Auszüge bis zum Anschlag in das
Gerät geschoben haben, bevor Sie
die Backofentür schließen.
8.3 Dampfgarzubehör
Das Dampfgarzubehör ist nicht im
Lieferumfang des Gerätes enthalten. Weitere Informationen erhalten Sie von Ihrem Händler vor Ort.
www.electrolux.com
56
Dampfgaren im Diätbräter
Diätbräter für das Dampfgaren Der Diätbräter besteht aus zwei Teilen: einer Aus-
B
sparung für die Düse (B) und einem Stahlrost, der auf den Boden des Bräters gelegt wird.
Düsen und Gummischlauch. „A“ ist der
Gummischlauch, „B“ ist die Düse für das
Dampfgaren und „C“ ist die Düse, die
beim Garen mit direktem Dampf zum Einsatz kommt.
BAC
Legen Sie das Gargut auf den Stahlrost
des Diätbräters. Geben Sie etwas Wasser
hinzu. Stecken Sie die Düse (B) in den
Gummischlauch. Stecken Sie die Düse (B)
in die dafür vorgesehene Aussparung im
Diätbräter. Führen Sie das mit dem Gummischlauch (A) verbundene Verbindungsstück in den Dampfeinlass ein.
Setzen Sie den Bräter in die erste oder
zweite Einschubebene von unten ein.
Achten Sie darauf, dass der Gummischlauch nicht geknickt wird und nicht mit
den oberen Heizelementen des Ofens in
Berührung kommt. Stellen Sie den Backofen auf die Betriebsart „Dampfgaren“ ein.
Garen mit direktem Dampf
Seien Sie beim Umgang mit den Düsen
vorsichtig, wenn der Backofen in Betrieb
DEUTSCH57
Legen Sie das Gargut auf den Stahlrost
des Diätbräters. Geben Sie etwas Wasser
hinzu. Stecken Sie die Düse (C) in den
Gummischlauch. Führen Sie das mit dem
Gummischlauch (A) verbundene Verbindungsstück in den Dampfeinlass ein.
Der obere Teil des Bräters wird
bei dieser Funktion nicht verwendet.
Für das Garen von Hähnchen, Ente, Pute,
Zicklein oder großen Fischstücken stecken Sie die Düse (C) direkt in den Hohlraum des Gargutes. Achten Sie darauf,
dass die Düsenöffnungen nicht blockiert
werden.
Setzen Sie den Bräter in die erste oder
zweite Einschubebene von unten ein.
Achten Sie darauf, dass der Gummischlauch nicht geknickt wird und nicht mit
den oberen Heizelementen des Ofens in
Berührung kommt. Stellen Sie den Backofen auf die Betriebsart „Dampfgaren“ ein.
Weitere Informationen finden Sie in den
Kochtabellen mit empfohlenen Einstellungen für das Dampfgaren.
Der Gummischlauch wurde speziell für das Garen von Lebensmitteln entwickelt und enthält keine
Schadstoffe.
ist. Bei der Handhabung der Düsen im
heißen Ofen sollten Sie Topfhandschuhe
verwenden. Nehmen Sie die Düsen aus
dem Ofen, wenn Sie nicht die Dampfgarfunktion verwenden.
9. ZUSATZFUNKTIONEN
9.1 Menü Bevorzugtes
Programm
Sie können Ihre bevorzugten Einstellungen wie Dauer, Temperatur oder Ofenfunktion speichern. Diese können Sie über
das Menü Bevorzugtes Programm abrufen. Sie können 20 Programme speichern.
Speichern eines Programms
1.
Schalten Sie das Gerät ein.
2.
Wählen Sie die Ofenfunktion oder die
Funktion Koch-Assistent .
3.
Berühren Sie wiederholt, bis das
Display SPEICHERN anzeigt. Mit OK
bestätigen.
4.
Im Display wird der erste freie Speicherplatz angezeigt.
Mit OK bestätigen.
www.electrolux.com
58
5.
6.
7.
• Sie können einen Speicherplatz auch
• Den Namen des Programms können
Einschalten des Programms
1.
2.
3.
Drücken Sie
tes Programm zu gelangen.
9.2 Tastensperre
Die Tastensperre verhindert ein versehentliches Verstellen der Ofenfunktion. Die
Funktion Tastensperre lässt sich nur bei
eingeschaltetem Gerät einschalten.
Einschalten der Funktion
Tastensperre :
1.
2.
3.
4.
5.
Geben Sie den Namen für das Programm ein. Der erste Buchstabe
blinkt.
Berühren Sie
oder , um den
Buchstaben zu ändern. Weiter mit
OK.
Berühren Sie oder , um den
Cursor nach rechts oder links zu bewegen. Weiter mit OK.
Der nächste Buchstabe blinkt. Wiederholen Sie die Schritte 5 und 6
nach Bedarf.
Zum Speichern halten Sie OK gedrückt.
Nützliche Informationen:
überschreiben. Wenn im Display der
erste freie Speicherplatz angezeigt wird,
drücken Sie
oder , und drücken
Sie dann OK, um ein bestehendes Programm zu überschreiben.
Sie im Menü Programm umbenennen
ändern.
Schalten Sie das Gerät ein.
Wählen Sie das Menü Bevorzugtes
Programm . Mit OK bestätigen.
Wählen Sie den Namen Ihres bevor-
zugten Programms aus. Mit OK bestätigen.
, um direkt zu Bevorzug-
Schalten Sie das Gerät ein.
Wählen Sie eine Ofenfunktion oder
Einstellung.
Drücken Sie wiederholt, bis im
Display Tastensperre angezeigt wird.
Mit OK bestätigen.
Die Tür ist verriegelt und im Display
wird ein Schlüssel angezeigt.
Wenn das Gerät über die Funktion
pyrolytische Reinigung verfügt und
die Funktion eingeschaltet ist, ist
die Tür verriegelt.
Ausschalten der Funktion
Tastensperre :
1.
Drücken Sie . Das Display zeigt eine Meldung an.
2.
Mit und OK bestätigen.
9.3 Kindersicherung
Die Kindersicherung verhindert ein versehentliches Bedienen des Geräts.
Ein- und Ausschalten der
Kindersicherung:
1.
Schalten Sie das Gerät ein.
2.
Berühren Sie gleichzeitig und ,
bis im Display eine Meldung angezeigt wird.
Wenn das Gerät über die Funktion
pyrolytische Reinigung verfügt und
die Funktion eingeschaltet ist, ist
die Tür verriegelt.
Im Display wird eine Meldung angezeigt, wenn Sie ein Sensorfeld
berühren.
Berühren Sie gleichzeitig
und , bis
im Display eine Meldung angezeigt wird.
9.4 SET + GO
Mit der Funktion SET + GO können Sie eine Ofenfunktion (oder ein Programm) einstellen und diese später durch Berühren
eines einzigen Sensorfelds einschalten.
Einschalten der Funktion:
1.
Schalten Sie das Gerät ein.
2.
Wählen Sie die Ofenfunktion.
3.
Drücken Sie wiederholt, bis im
Display Dauer angezeigt wird.
4.
Stellen Sie die Zeit ein.
5.
Drücken Sie wiederholt, bis im
Display SET + GO angezeigt wird.
6.
Mit OK bestätigen.
Zum Starten von SET + GO berühren Sie
ein beliebiges Sensorfeld (außer
eingestellte Ofenfunktion wird gestartet.
Nach Ablauf der Ofenfunktion ertönt ein
akustisches Signal.
). Die
Nützliche Informationen:
• Während die Ofenfunktion in Betrieb ist,
ist die Tastensperre eingeschaltet.
• Sie können die Funktion SET + GO im
Menü Einstellungen ein- und ausschalten.
9.5 Automatische Abschaltung
Das Gerät wird aus Sicherheitsgründen
nach einiger Zeit automatisch ausgeschaltet, wenn:
• Eine Backofenfunktion eingestellt ist.
• Sie die Backofentemperatur nicht än-
dern.
Backofentem-
peratur
30 °C - 120 °C12,5 Stunden
120 °C - 200 °C8,5 Stunden
200 °C - 250 °C5,5 Stunden
250 °C - maxima-
le Temperatur
Abschaltzeit
3,0 Stunden
DEUTSCH59
Die Abschaltautomatik ist bei allen
Funktionen anwendbar, außer
Backofenbeleuchtung , Dauer und
Ende .
9.6 Kühlventilator
Wenn das Gerät in Betrieb ist, wird automatisch das Kühlgebläse eingeschaltet,
um die Geräteflächen zu kühlen. Nach
dem Abschalten des Geräts läuft das
Kühlgebläse weiter, bis das Gerät abgekühlt ist.
9.7 Sicherheits-Thermostat
Ein unsachgemäßer Gebrauch des Geräts
oder defekte Bauteile können zu einer gefährlichen Überhitzung führen. Um dies zu
verhindern, ist der Backofen mit einem Sicherheitsthermostat ausgestattet, der die
Stromzufuhr unterbrechen kann. Die Wiedereinschaltung erfolgt automatisch bei
einen Temperaturabfall.
10. PRAKTISCHE TIPPS UND HINWEISE
• Das Gerät hat fünf Einschubebenen.
Die Einschubebenen werden vom Boden des Backofens aus gezählt.
• Das Gerät ist mit einem exklusiven Umluft- und Dampfsystem zur Regelung
der Luftzirkulation und des Dampfkreislaufs ausgerüstet. Das Garen mit
Dampf macht Ihre Speisen innen weich
und außen knusprig. Gardauer und
Energieverbrauch werden dabei auf ein
Minimum reduziert.
• Es kann sich Feuchtigkeit im Gerät oder
an den Glastüren niederschlagen. Das
ist normal. Stehen Sie beim Öffnen der
Tür während des Betriebs stets in sicherer Entfernung zum Gerät. Um die
Kondensation zu reduzieren, heizen Sie
vor dem Garen den Backofen immer 10
Minuten vor.
• Wischen Sie das Gerät nach jedem Gebrauch mit einem Tuch trocken.
• Stellen Sie keine Gegenstände direkt
auf den Backofenboden und bedecken
Sie das Kochgeschirr nicht mit Alu-Folie. Dies könnte das Garergebnis beeinträchtigen und die Emailbeschichtung
beschädigen.
10.1 Backen von Kuchen
• Die Backofentür nicht öffnen, bevor 3/4
der Backzeit abgelaufen ist
• Wenn Sie zwei Backbleche gleichzeitig
nutzen, lassen Sie eine Ebene dazwischen frei.
10.2 Garen von Fleisch und
Fisch
• Setzen Sie beim Garen von Speisen mit
hohem Fettgehalt eine Brat- und Fettpfanne ein, damit keine dauerhaften
Flecken im Backofen verbleiben.
• Das Fleisch vor dem Anschneiden mindestens 15 Minuten ruhen lassen, damit der Fleischsaft nicht ausläuft.
www.electrolux.com
60
• Um Rauchentwicklung beim Braten zu
10.3 Garzeiten
Die Garzeiten hängen von der Art des
Garguts, seiner Konsistenz und der Menge ab.
10.4 Back- und Brattabelle
KUCHEN
Rührteig21703 (2 und 4)16045 – 60Kuchenform
Mürbeteig21703 (2 und 4)16020 – 30Kuchenform
Buttermilch-
Käsekuchen
Apfelkuchen21702 (links
Strudel3175215060 – 80Backblech
Marmela-
denkuchen
Biskuit2170215040 – 50Kuchenform
Stollen/üppiger Früchtekuchen
Rosinenkuchen
Kleine Kuchen – eine
Ebene
Kleine Kuchen – zwei
Ebenen
vermindern, geben Sie etwas Wasser in
die Brat- und Fettpfanne. Um Kondensierung des Rauchs zu vermeiden,
Wasser zugeben, wenn die Brat- und
Fettpfanne ausgetrocknet ist.
Ober- und Un-
GERICHT
terhitze
Ein-
schub-
ebene
Tempera-
tur
[°C]
Ringheizkörper
1170216580 – 100Kuchenform
21702 (links
2160215090 – 120Kuchenform
1175216050 – 60
31703150 –
--2 und 4140 –
Achten Sie beim Garen anfangs immer
auf das Gargut. Finden Sie selbst die besten Einstellungen (Garstufe, Garzeit, usw.)
für Kochgeschirr, Rezepte und Mengen
bei der Verwendung dieses Geräts heraus.
wissenschaftlichen Erkenntnissen kann
die Bräunung von Lebensmitteln, speziell
11. REINIGUNG UND PFLEGE
bei stärkehaltigen Produkten, eine
gesundheitliche Gefährdung durch
Acrylamid verursachen. Daher empfehlen
wir, bei möglichst niedrigen Temperaturen
zu garen und die Speisen nicht zu stark
zu bräunen.
WARNUNG!
Siehe Kapitel „Sicherheitshinweise“.
• Feuchten Sie ein weiches Tuch mit warmem Wasser und etwas Reinigungsmittel an, und reinigen Sie damit die Vorderseite des Geräts.
• Reinigen Sie die Metalloberflächen mit
einem handelsüblichen Reinigungsmittel.
• Reinigen Sie den Innenraum des Backofens nach jedem Gebrauch. So lassen
sich Verschmutzungen leichter entfernen und es kann nichts einbrennen.
• Entfernen Sie hartnäckige Verschmutzungen mit speziellen Backofenreinigern.
• Reinigen Sie alle Zubehörteile nach jedem Gebrauch und lassen Sie sie
trocknen. Feuchten Sie ein weiches
Tuch mit warmem Wasser und etwas
Spülmittel an.
Abnehmen der Einhängegitter
• Zubehörteile mit Antihaftbeschichtung
dürfen nicht mit aggressiven Reinigungsmitteln, scharfkantigen Gegenständen oder im Geschirrspüler gereinigt werden. Die Antihaftbeschichtung
kann dadurch zerstört werden.
Geräte mit Edelstahl- oder Aluminiumfront:
Reinigen Sie die Backofentür nur
mit einem nassen Schwamm und
trocknen Sie sie mit einem weichen Tuch ab.
Verwenden Sie keine Stahlwolle,
Säuren oder Scheuermittel, da
diese die Oberflächen beschädigen können. Reinigen Sie das Bedienfeld auf gleiche Weise.
11.1 Einhängegitter
Die Einhängegitter können zur Reinigung
der Seitenwände entfernt werden.
1.
Ziehen Sie das vordere Ende des Einhängegitters von der Seitenwand weg.
DEUTSCH73
2.
Ziehen Sie das hintere Ende des Einhängegitters von der Seitenwand
weg, und nehmen Sie das Einhängegitter heraus.
1
2
Einsetzen der Einhängegitter
Führen Sie zum Einsetzen der Einhängegitter die oben beschriebenen Schritte in
umgekehrter Reihenfolge durch.
Die abgerundeten Enden der Einhängegitter müssen nach vorn
zeigen.
11.2 Pyrolyse
VORSICHT!
Falls das Gerät ein Kochfeld besitzt, nehmen Sie es während der
Pyrolyse -Funktion nicht in Betrieb. Andernfalls kann das Gerät
beschädigt werden.
Nur Modelle mit Dampf: Bevor Sie
mit der Reinigung beginnen, vergewissern Sie sich, dass der Wassertank vollständig leer ist. Siehe
„Entleeren des Wassertanks“.
Bitte die Innenaustattung aus dem
Ofen entfernen.
Die Reinigung kann in folgenden
Fällen nicht gestartet werden:
• Wenn Sie die Einhängegitter oder die
Auszüge (sofern vorhanden) nicht entfernen.
• Wenn Sie die Backofentür nicht richtig
schließen.
• Wenn Sie den KT Sensor (sofern vorhanden) nicht aus der Buchse ziehen.
Beim Beginn der Pyrolyse ist die
Tür des Geräts verriegelt. Nach
Beendigung der Funktion ist die
Tür während der Abkühlphase
verriegelt. Während der Abkühlphase sind einige der Gerätefunktionen nicht verfügbar.
WARNUNG!
Am Ende der Pyrolyse ist das Gerät sehr heiß. Lassen Sie das Gerät abkühlen. Es besteht Verbrennungsgefahr!
Pyrolyse :
1.
Entfernen Sie grobe Rückstände von
Hand.
2.
Schalten Sie das Gerät ein und wählen Sie die Funktion Pyrolyse im
Hauptmenü. Mit OK bestätigen.
3.
Stellen Sie die Dauer der
pyrolytischen Reinigung ein:
– Kurz - 1 Std. bei leichter Ver-
schmutzung
– Normal - 1 Std. 30 Min. bei norma-
ler Verschmutzung
– Stark - 2 Std. 30 Min. bei sehr star-
ker Verschmutzung
4.
Mit OK bestätigen.
11.3 Backofenlampe
WARNUNG!
Gehen Sie beim Austauschen der
Backofenlampe sorgsam vor. Es
besteht die Gefahr eines elektrischen Schlags.
Bevor Sie die Backofenlampe
austauschen:
• Schalten Sie den Backofen aus.
• Entfernen Sie die Sicherungen aus dem
Sicherungskasten, oder schalten Sie
den Schutzschalter aus.
Legen Sie ein Tuch auf den Backofenboden, um die Lampe und
das Glas zu schützen.
Halogenlampen immer mit einem
Tuch anfassen, um ein Einbrennen von Fett (Fingerabdrücke) zu
vermeiden.
www.electrolux.com
74
1.
2.
3.
4.
11.4 Reinigen der Backofentür
Die Backofentür ist mit vier Glasscheiben
ausgestattet. Die Backofentür und die in-
Aushängen der Backofentür und Herausnehmen der Glasscheiben
Drehen Sie die Glasabdeckung gegen
den Uhrzeigersinn und nehmen Sie
sie ab.
Reinigen Sie die Glasabdeckung.
Ersetzen Sie die Backofenlampe
durch eine geeignete 300 °C hitzebeständige Backofenlampe.
Verwenden Sie eine Ofenlampe mit
der gleichen Leistung.
Bringen Sie die Glasabdeckung wieder an.
neren Glasscheiben können zur Reinigung
herausgenommen werden.
Versuchen Sie nicht, die Glasscheiben herauszunehmen, solange die Backofentür noch am Gerät montiert ist: Die Tür kann zuklappen.
1.
Öffnen Sie die Backofentür bis zum
Anschlag, und greifen Sie an das
Scharnier rechts an der Tür.
2.
Drücken Sie auf das Befestigungselement, bis es zurückgezogen werden
kann.
3.
Halten Sie das gedrückte Element
mit einer Hand fest, während Sie mit
der anderen Hand den Hebel des
rechten Scharniers mit einem
Schraubendreher anheben und abschrauben.
DEUTSCH75
4.
Greifen Sie an das Scharnier links an
der Tür.
5.
Heben Sie die Hebel der beiden
Scharniere an, und klappen Sie sie
nach vorn.
6.
Schließen Sie die Backofentür bis zur
ersten Raststellung (halb). Ziehen Sie
sie dann nach vorn aus der Halterung
heraus.
www.electrolux.com
76
7.
Breiten Sie ein weiches Tuch auf einer ebenen und stabilen Unterlage
aus, und legen Sie die Tür ab.
8.
Lösen Sie das Verriegelungssystem,
um die Glasscheiben herauszunehmen.
9.
Drehen Sie die beiden Befestigungselemente um 90°, und nehmen Sie
sie heraus.
90°
10.
Heben Sie jede Glasscheibe zunächst vorsichtig an (Schritt 1), und
nehmen Sie sie dann heraus (Schritt
2). Beginnen Sie mit der obersten
Glasscheibe.
11.
Reinigen Sie die Glasscheiben mit
Wasser und Spülmittel. Trocknen Sie
2
1
die Glasscheiben sorgfältig ab.
Einsetzen der Backofentür und der Glasscheiben
DEUTSCH77
AB C
11.5 Reinigen des
Wasserbehälters
WARNUNG!
Füllen Sie während des Reinigungsvorgangs kein Wasser in
den Wasserbehälter.
Während der Reinigung kann es
vorkommen, dass etwas Wasser
aus dem Dampfeinlass in den
Garraum tropft. Setzen Sie eine
Fettpfanne in die Einschubebene
direkt unter dem Dampfeinlass
ein, damit kein Wasser auf den
Boden des Garraums tropfen
kann.
Nach einiger Zeit können sich im Inneren
des Backofens Kalkablagerungen bilden.
Um dem entgegenzuwirken, reinigen Sie
auch die Backofenteile, die für die Dampferzeugung verantwortlich sind. Leeren Sie
den Wasserbehälter nach jedem Dampfgaren.
Nach der Reinigung müssen die Backofentür und die Glasscheiben wieder eingebaut werden. Führen Sie die oben beschriebenen Schritte in umgekehrter Reihenfolge durch.
Achten Sie beim Wiedereinsetzen der
Glasscheiben (A, B und C) auf die richtige
Reihenfolge. Die mittlere Glasscheibe (B)
ist mit einem Dekorrahmen versehen. Die
bedruckte Zone muss zur Innenseite der
Tür weisen. Berühren Sie die bedruckte
Zone des Dekorrahmens (B) nach der
Montage, um sich zu vergewissern, dass
sie sich von außen nicht rau anfühlt.
Achten Sie darauf, dass Sie die oberste
Glasscheibe ordnungsgemäß in die Aufnahmen einsetzen.
1.
Geben Sie 900 ml Wasser und 50 ml
(fünf Teelöffel) Zitronensäure in den
Wasserbehälter. Schalten Sie den
Backofen aus, und warten Sie ca. 60
Minuten.
2.
Schalten Sie den Backofen wieder
ein, und wählen Sie die Funktion
Heißluft mit Dampf . Stellen Sie die
Temperatur auf 230 °C. Schalten Sie
das Gerät nach 25 Minuten aus, und
lassen Sie es 15 Minuten abkühlen.
3.
Schalten Sie den Backofen wieder
ein, und wählen Sie die Funktion
Heißluft mit Dampf . Stellen Sie die
Temperatur zwischen 130 und 230
°C ein. Schalten Sie das Gerät nach
10 Minuten aus. Lassen Sie es abkühlen, und leeren Sie dann den
Wasserbehälter (siehe „Entleeren des
Wasserbehälters“).
4.
Spülen Sie den Wasserbehälter aus,
und wischen Sie eventuelle Kalkrückstände im Backofen mit einem Tuch
ab.
www.electrolux.com
78
5.
Wasserarten
•
120 - 180 mgl12 - 188 - 10
Reinigen Sie den Ablaufschlauch per
Hand in einer warmen Seifenlauge.
Um Schäden zu vermeiden, sollten
keine Sprays und keine säurehaltigen
oder ähnliche Reinigungsmittel verwendet werden.
Weiches Wasser mit geringem
Kalkgehalt – wird vom Hersteller emp-
fohlen, da in diesem Fall die Häufigkeit
der notwendigen Reinigung reduziert
wird.
• Leitungswasser – kann verwendet
werden, wenn das Wasser gefiltert
bzw. enthärtet wird.
• Hartes Wasser mit hohem Kalkge-halt – wirkt sich nicht negativ auf den
Gerätebetrieb aus, erhöht jedoch die
Häufigkeit der notwendigen Reinigung.
KALKMENGENTABELLE DER WHO
(Weltgesundheitsorganisation)
Kalkablage-
rungen
Wasserhärte
(Französi-
sche Was-
serhärtegra-
de)
Wasserhärte
(Deutscher
Wasserhär-
tegrad)
Wasserklas-
sifizierung
0 - 60 mgl0 - 60 - 3Weich
60 - 120 mgl6 - 123 - 7Mittel
Hart oder
kalkhaltig
über 180 mglüber 18über 10Sehr hart
Entkalkung
durchführen
alle
150 Zyklen –
2,5 Monate
100 Zyklen – 2
Monate
75 Zyklen –
1,5 Monate
60 Zyklen – 1
Monat
12. WAS TUN, WENN …
WARNUNG!
Siehe Kapitel „Sicherheitshinweise“.
ProblemMögliche UrsacheAbhilfe
Das Gerät heizt
nicht.
Das Gerät heizt
nicht.
Das Gerät heizt
nicht.
Das Gerät heizt
nicht.
Das Gerät ist ausgeschaltet. Schalten Sie das Gerät ein.
Die Uhrzeit ist nicht eingestellt.
Die erforderlichen Einstellungen wurden nicht vorgenommen.
Die Kindersicherung ist eingeschaltet.
Stellen Sie die Uhrzeit ein.
Vergewissern Sie sich, dass
die Einstellungen richtig
sind.
Siehe „Ausschalten der Kindersicherung“.
DEUTSCH79
ProblemMögliche UrsacheAbhilfe
Das Gerät heizt
nicht.
Die Sicherung hat ausgelöst. Vergewissern Sie sich, dass
die Sicherung der Grund für
die Störung ist. Löst die Sicherung wiederholt aus,
wenden Sie sich an eine
Elektrofachkraft.
Wasser im Gerät.Der Wassertank ist zu voll.Schalten Sie das Gerät aus
und entfernen Sie das Wasser mit einem Schwamm
oder einem Tuch.
Das Dampfgaren
funktioniert nicht.
Das Dampfgaren
funktioniert nicht.
Im Wassertank ist kein Wasser.
Kalkablagerungen in der
Dampfeintrittsöffnung.
Füllen Sie den Wassertank.
Überprüfen Sie die Dampfeintrittsöffnung. Entfernen
Sie Kalkablagerungen.
Die Entleerung des
Wassertanks dauert
länger als drei Minu-
Im Gerät befinden sich Kalkablagerungen.
Prüfen Sie den Wassertank.
Siehe „Reinigen des Was-
sertanks“.
ten oder das Wasser tritt aus der
Dampfeintrittsöffnung aus.
Dampf und Kondenswasser schlagen sich auf Speisen und im Backofen nieder.
Im Display erscheint
„F111“.
Die Lampe funktioniert nicht.
Im Display erscheint
„Demo“. Das Gerät
heizt nicht. Der Ventilator funktioniert
nicht.
Die Speisen standen zu lange im Gerät.
Speisen nach Beendigung
des Gar- oder Backvor-
gangs nicht länger als 15 -
20 Minuten im Backofen
stehen lassen.
Der KT Sensor ist nicht richtig in die Buchse eingesteckt.
Stecken Sie den Stecker
des KT Sensors so weit wie
möglich in die Buchse ein.
Die Lampe ist defekt.Tauschen Sie die Lampe
aus.
Der Test-Modus ist eingeschaltet.
1.
Schalten Sie das Gerät
aus.
2.
Berühren und halten Sie
, bis das Gerät ein-
und ausschaltet.
3.
Halten Sie und
gleichzeitig gedrückt,
bis ein Signalton ertönt
und „d“ erlischt.
Wenn Sie das Problem nicht selbst lösen
können, wenden Sie sich an Ihren Fachhändler oder Kundendienst.
Die vom Kundendienst benötigten Daten
finden Sie auf dem Typenschild. Das Ty-
Wir empfehlen, dass Sie folgende Daten hier notieren:
penschild befindet sich am Frontrahmen
des Garraums.
www.electrolux.com
80
Modell (MOD.).........................................
Der elektrische Anschluss muss
von einer qualifizierten Fachkraft
vorgenommen werden.
Der Hersteller haftet nicht für
Schäden, die aufgrund der Nichtbeachtung der Sicherheitsvorkehrungen des Kapitels „Sicherheitshinweise“ entstehen.
Das Gerät wird mit einem Netzstecker
und Netzkabel geliefert.
13.3 Kabel
Einsetzbare Kabeltypen für Einbau oder
Austausch: H07 RN-F, H05 RN-F, H05
RRF, H05 VV-F, H05 V2V2-F (T90), H05
BB-F.
Näheres zum Kabelquerschnitt siehe Gesamtleistung (auf dem Typenschild) und in
der Tabelle:
DEUTSCH81
Gesamte Leis-
tungsaufnah-
me
maximal 1380W3 x 0,75 mm²
maximal 2300W3 x 1 mm²
14. UMWELTTIPPS
Recyceln Sie Materialien mit dem Symbol
. Entsorgen Sie die Verpackung in den
entsprechenden Recyclingbehältern.
Recyceln Sie zum Umwelt- und
Gesundheitsschutz elektrische und
Kabelquerschnitt
Gesamte Leis-
Kabelquerschnitt
tungsaufnah-
me
maximal 3680W3 x 1,5 mm²
Die Erdleitung (gelb-grünes Kabel) muss 2
cm länger sein als die Phasenleitung und
der Nullleiter (blaues und braunes Kabel).
elektronische Geräte. Entsorgen Sie
Geräte mit diesem Symbol
dem Hausmüll. Bringen Sie das Gerät zu
Ihrer örtlichen Sammelstelle oder wenden
Sie sich an Ihr Gemeindeamt.
nicht mit
www.electrolux.com
82
DEUTSCH83
www.electrolux.com/shop
397279301-A-222012
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.