AEG-Electrolux 95751G-B User Manual

95751
Table de cuisson
Kochmulde
Gaskookplaat
Gas hob
Notice d’utilisation et d’encastrement Gebrauchs- und Einbauanweisung Gebruiksaanwijzing en Installatievoorschrift Operating and Installation Instructions
AUS ERFAHRUNG GUT
BE
ENGLISH
Important Safety Information
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
During Operation
This appliance has been designed for non professional purpose in private houses only. It is meant to cook edible foodstuff only and MUST NOT be used for any other purposes.
It is dangerous to alter the specification in any way.
For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats or other foodstuff could result in a fire.
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
Ensure that all control knobs are in the OFF position when not in use.
Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric cables are not in contact with it and keep them far enough from the heated parts of this appliance.
If the appliance is out of order, disconnect it from the electric supply.
Child Safety
This appliance has been designed to be operated by adults and children under supervision. Young children MUST NOT be allowed to tamper with the controls or play near or with the oven.
Accessible parts of this appliance may become hot when it is in use. Children should be KEPT AWAY until it has cooled.
About Installation, Cleaning and Manteinance
It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations.
Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.
38
Ensure a good ventilation around the appliance. A poor air supply could cause lack of oxygen.
Ensure that the gas supply complies with the gas type stated on the identification label, placed near the gas supply pipe.
The use of a gas cooking appliance results in the production of heat and moisture in
the room in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).
Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.
Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation.
The manufacturer disclaims any responsability should all the safety measures not be carried out.
Service
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
Environmental Information
After installation, please dispose of the packaging with due regard to safety and the environment.
When disposing of an old appliance, make it unusable, by cutting off the cable.
These instructions are only for the countries stated by the symbol printed on the front cover of this instruction book.
39
Contents
For the User
Important Safety Information 38 Description of the appliance 41 Instruction for the User 41 Cleaning and Maintenance 42 Something Not Working? 43
For the Installer
Instruction for the Installer 44 Technical data 45 Electrical Connection 46 Adaptation to different types of gas 47 Building In 48 Possibilities for insertion 49
Guide to Use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
40
Safety Instructions
Step by step instructions for an operation
Hints and Tips
Environmental information
This appliance complies with the following E.E.C. Directives:
-73/23 - 90/683 (Low Voltage Directive);
-89/336 (Electromagnetical Compatibility Directive);
-90/396 (Gas Appliance Directive)
-93/68 (General Directives)
and subsequent modifications.
Description of the appliance
1
2
2
4
3
2
5
Instruction for the User
Hob burners control knobs
The symbols on the knobs mean that :
there is no gas supply
there is maximum gas supply
there is minimum gas supply
1. Hob top
2. Semi-rapid burner
3. Auxiliary burner
4. Rapid burner
5. Control knobs
Lighting the burners
For easier lighting, proceed before putting a pan on the pan support.
To light a burner, turn the relevant knob anticlockwise to
maximum position and push down the knob to ignite. After lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig. 1 lett. C) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted. Then, check the flame is regular and adjust it as required. If you cannot light the flame even after several attempts, check the "cap" (Fig. 1 lett. A) is in the correct position. To put the flame out, turn the knob to the symbol .
Always turn the flame down or put it out before taking the pans off the burner.
Fig. 1
A - Burner cap B - Ignition candle C - Thermocouple
41
Loading...
+ 11 hidden pages