88032KF-N
User manual Ceramic glass induction
hob
Contents
2
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we recommend
you to keep it in a safe plac e. An d p le as e pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
Contents
Operating the appliance 2
Safety Information 2
Description of the appliance 4
Operating the appliance 6
Tips on cooking and frying 12
Cleaning and care 14
What to do if ... 14
Disposal 16
Installation instructions 17
Safety information 17
Service 19
Guarantee/Customer Service 19
Subject to change without notice
Operating the appliance
Safety Information
WARNING!
Please comply with these instructions. If you do not, any damage resulting is not covered
by the warranty.
Correct use
• This appliance is not intended for use by children or other persons whose physical, sensory
or mental capabilities or lack of experience and knowledge prevents them from using
the appliance safely without supervision or instruction by a responsible person to ensure
that they can use the appliance safely.
• Do not leave the appliance unattended during operation.
• This appliance should be used only for normal domestic cooking and frying of food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusible objects
(e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
Safety Information
• To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they have built in to suitable built-in units
and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches
or splits), the appliance must be switched off and disconnected from the electrical supply,
to prevent the possibility of an electric shock.
• Repairs to the appliance must only be carried out by trained registered service engineers.
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not touch the hot surface of the appliance or hot
cookware.
• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
• Switch the cooking zones off after each use.
• Users with implanted pacemakers should keep their upper body at least 30 cm from
induction cooking zones that are switched on.
• Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and
saucepan lids on the cooking surface, as they can get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning
equipment is not permitted.
3
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the
glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass ceramic and should
be removed straightaway.
• Do not use the cooking zones with empty cookware or without cookware.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans
to boil dry.
• The ventilation gap of 5mm between the worktop and front of the unit underneath it
must not be covered.
Description of the appliance
4
Description of the appliance
Cooking surface layout
21 3 4
5
1 Induction cooking zone 2300 W, with power function 3200 W
2 Induction cooking zone 2300 W, with power function 3200 W
3 Induction cooking zone 2300 W, with power function 3200 W
4 Induction cooking zone 2300 W, with power function 3200 W
5 Control panel
The cooking surface is divided into four cooking zones. In each cooking zone under the
glass ceramic is an induction heating element, the middle of each one being marked with
a cross on the glass ceramic surface. Cookware can be placed on any of the cooking zones.
But the cross must be completely covered by the cookware. The bottom of the cookware
must be from 125 - 210 mm in diameter.
WARNING!
Keep the pots out of the panel frame!
Cooking over two cooking zones
Large cookware can be heated with two cooking zones simultaneously. Either the two
cooking zones on the left-hand side or on the right-hand side of the cooking surface are
suitable for this.
1. Place cookware centrally on the two zones.
The cookware must cover at least two crosses.
2. Set the same heat setting for the two cooking zones (max. setting 8).
With different cookware there can be differences in the heat distribution. Good cooking
results can be achieved with cookware with thick, flat bottoms.
Control panel layout
Description of the appliance
5
1 2 3
89 7 6
1 Child lock with display
2 Cooking zone indicators - Timer function
3 Timer display
4 Power function
5 Heat setting indicator
6 Heat setting selection
7 Timer
8 STOP+GO with indicator
9 On/Off with indicator
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by
touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor
fields which activate a desired function. Do not cover other sensor fields.
If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance
switches itself off.
4
5
Sensor field Function
On / Off Switches appliance on and off
Child lock Locking control panel for children
STOP+GO To switch the Keep Warm setting on/ off
6
Displays
Operating the appliance
Sensor field Function
Power Switching the power function on and off
Timer Timer selection
Increase settings To increase Timer time
Reduce settings To reduce Timer time
Display Description
The cooking zone is switched off
Keep Warm settings Keep Warm / STOP+GO function is switched on
-
+ digit
Heat settings To set heat settings
Auto Warm-up The Auto Warm-up function is switched on
Fault Malfunction has occurred
Pan detection Cookware is unsuitable or too small or no cookware
Residual heat Cooking zone is still hot
Child safety device Lock/Child safety device is set
Power Power function is switched on
Automatic Switch off Switch off is active
has been placed on the cooking zone
Residual heat indicator
WARNING!
Risk of burns from residual heat. After being switched off, the cooking zones need some
time to cool down. Look at the residual heat indicator
.
Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of
the cookware. The glass ceramic is merely heated by the residual heat of the cookware.
Operating the appliance
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Control panel Display Pilot light
Switch on
Touch for 1 second /
lights up.
Operating the appliance
Control panel Display Pilot light
Switch off
Touch for 1 second / none
goes out.
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.
Setting the heat setting
Control Panel Display
To set the heat setting Touch the desired heat setting,
if necessary, correct to the left
or to the right
Switch off Touch 0
to /
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
Control panel Display
To switch on
To switch off
When you switch the appliance off, the locking function is automatically switched off.
Touch (for 4 seconds)
Touch
previously set heat setting
7
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
Control panel Display
To switch on
To switch off
Touch
Touch
Previous heat setting (not automatic warm-up or power
function)
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field .
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function. When setting a heat
setting using the automatic warm-up function, the cooking zone switches to full power
for a certain amount of time and then automatically switches back to the heat setting set.
Step Control Panel Display
1.
Touch
Operating the appliance
8
Step Control Panel Display
2. Move your finger down
from
to select the de-
sired heat setting between
and
/ after 5 seconds . As long as is
displayed, the appliance works at full power. After
the automatic warm up is completed, the heat
setting
/ is displayed again.
The length of time that the automatic warm up function operates depends on the heat
setting selected.
Heat setting Length of the automatic warm up [min:sec]
0:12
0:12
1:21
3:07
4:24
5:51
8:12
10:12
10:36
2:01
2:01
2:28
2:52
---
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Switching on the child safety device
Step Control panel Display/Signal
1.
2.
The child safety device is switched on.
Switching off the child safety device
Step Control panel Display/Signal
1.
2.
3.
Switch on appliance. Do not set a heat setting.
Touch for 4 seconds
Switch on appliance. Do not set a heat setting.
Touch for 4 seconds lights up
Switch appliance off.
Operating the appliance
Step Control panel Display/Signal
The child safety device is switched off.
The child safety device can only be switched on and off if no heat setting is set.
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking session; it remains
activated afterwards.
Step Control panel Display/Signal
1.
2.
Until the appliance is next switched off, it can used as normal. After switching off the appliance,
the child safety device is active again.
Switch appliance on
Touch for 4 seconds lights up
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.
Switching the power function on and off
The power function makes more power available to the induction cooking zones, e.g. to
bring a large quantity of water to the boil quickly. The power function is activated for 8
minutes at most. After that the induction cooking zone automatically switches back to heat
setting
To switch on
To switch off Touch a heat setting
.
Control panel Display
Touch
/
9
Power Management
The cooking zones of the cooking surface have a
maximum power.
The maximum power is reached when the heat
setting 14 has been set for all cooking zones.
Two cooking zones generate a pair (see figure)
and therefore, the power management shares the
maximum available power between these cooking zones.
When the power function is selected for one
cooking zone, the power management makes the
additional power for this cooking zone available
by reducing the power of the corresponding other cooking zone.
Example: the heat setting 14 is selected on one cooking zone. The power function is
switched on for the corresponding cooking zone. The power function is carried out but the
heat setting 14 of one of the cooking zones and the power function for the other cooking
Operating the appliance
10
zone of the pair exceed the maximum power for both at the same time. For this purpose,
the power management reduces the power of the cooking zone that switched on first from
14 to example 5 and the display of this cooking zone changes between 14 and 5 and then
stays at the current possible maximum 5 (If the display changes between 14 and 5 or 14
and 3 or another value depends on the type of appliance and the size of the cooking zone).
Using the timer
Function Condition Outcome after the time has
Automatic cut-out a heat setting is set acoustic signal
00
Cooking zone switches off
Countdown timer cooking zones not in use acoustic signal
00
If just one countdown value is set you can change it only when the appliance is switched
on.
If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking
zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
Selecting a cooking zone
Step Control panel Display
1.
Touch once
Pilot light of the first cooking zone flashes
elapsed
flashes
flashes
2.
3.
4.
Touch once
Touch once
Touch once
Pilot light of the second cooking zone flashes
Pilot light of the third cooking zone flashes
Pilot light of the fourth cooking zone flashes
If other timer functions are set, after a few seconds the shortest remaining time of all the
timer functions is displayed and the corresponding pilot light flashes.
Setting the time
Step Control panel Display
1.
2.
Select a cooking zone
Touch or
Pilot light for the cooking zone selected
flashes
to 99 minutes
00
0
Operating the appliance
Step Control panel Display
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step Control panel Display
1.
2.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Select a cooking zone
Touch The time remaining counts backwards to 00 .
Pilot light of cooking zone selected flashes faster
Time remaining is displayed
Changing the time
Step Control panel Display
1.
2.
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Select a cooking zone
Touch or
Pilot light of the selected cooking zone
flashes more quickly
Remaining time is displayed
to 99 minutes
1
Displaying the time remaining for a cooking zone
Step Control panel field Display
1.
After a few seconds the pilot light flashes more slowly.
Select a cooking zone
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
Switching off the acoustic signal
Step Control panel field Acoustic signal
1.
Acoustic signal stops.
Touch
Acoustic signal to acknowledge.
11
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, etc.) for longer than approx.
10 seconds, a signal sounds and the cooking surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically switches itself
off after approx. 10 seconds.
Tips on cooking and frying
12
Control panel
• When the appliance is switched off, if one or more of the sensor fields on the control
panel are covered for more than 10 seconds, an acoustic signal sounds. The acoustic
signal switches itself off automatically when the sensor fields are no longer covered.
Induction cooking zones
• In the case of overheating (e.g. when a saucepan boils dry) the cooking zone automatically switches itself off.
be set to
and allowed to cool.
• If cookware that is not suitable is used,
is displayed. Before being used again the cooking zone must
lights up in the display and after 2 minutes
the display for the cooking zone switches itself off.
• If one of the cooking zones is not switched off after a certain time, or if the heat setting
is not modified, the relevant cooking zone switches off automatically.
Before being used again, the cooking zone must be set to
Heat setting Switches off after
1 - 3 6 hours
4 - 7 5 hours
8 - 9 4 hours
10 - 14 1.5 hours
.
Tips on cooking and frying
is displayed.
Information about acrylamides
According to the latest scientific research, intensive browning of food, especially in products
containing starch, may present a health risk due to acrylamide. Therefore we recommend
cooking at low temperatures and not browning foods too much.
Cookware for induction cooking zones
Cookware material Suitable
Steel, enamelled steel +
Cast iron +
Stainless steel +*
Cookware bottom of multilayer +*
Aluminium, copper, brass -
Glass, ceramic, porcelain -
* Cookware for induction cooking zones is labelled as suitable by the manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
• ... a little water on an induction cooking zone set to the highest heat setting is heated
within a short time.
• ... a magnet sticks to the bottom of the cookware.
Tips on cooking and frying
Certain cookware can make noises when being used on induction cooking zones. These
noises are not a fault in the appliance and do not affect operation in any way.
Bottom of the cookware
The bottom of the cookware should be as thick and level as possible.
Pan size
Induction cooking zones adapt automatically to the size of the bottom of the cookware up
to a certain point. However the magnetic part of the bottom of the cookware must have
a minimum diameter depending on the size of the cooking zone. Cookware with a bottom
with a diameter of less than 12cm is not suitable.
Tips on energy saving
Place cookware on the cooking zone before it is switched on.
If possible, always place a lid on the cookware.
Examples of cooking applications
The information given in the following table is for guidance only.
Heat set-
ting
0 Off position
1
1-3 Melting Hollandaise sauce,
1-3 Solidifying Fluffy omelettes,
3-5 Simmering Simmering rice and
5-7 Steaming
7-9 Boiling Steaming potatoes 20-60 mins. Use only a little liq-
7-9 Boiling Cooking larger
Cooking process suitable for Cook time Tips/Hints
Keeping food warm Keeping cooked
Braising
foods warm
melting butter,
chocolate, gelatine
baked eggs
milkbased dishes
Heating up readycooked meals
Steaming vegetables, fish Braising
meat
quantities of food,
stews and soups
as required Cover
5-25 mins. Stir occasionally
10-40 mins. Cook with lid on
25-50 mins. Add at least twice
as much liquid as
rice, stir milk dishes
part way through
cooking
20-45 mins. With vegetables
add only a little liquid (a few tablespoons)
uid, e. g.: max. ¼ l
water for 750 g of
potatoes
60-150 mins. Up to 3 l liquid plus
ingredients
13
Cleaning and care
14
Heat set-
ting
9-12 Gentle frying Frying escalope,
12-13 Heavy frying Hash browns, loin
14 Boiling Searing
Cooking process suitable for Cook time Tips/Hints
as required Turn halfway
through cooking
5-15 mins. per pan Turn halfway
through cooking
Deep frying
veal cordon bleu,
cutlets, rissoles,
sausages, liver,
roux, eggs, pancakes, doughnuts
steaks, steaks, Flädle (pancakes for
garnishing soup)
Boiling large quantities of water, cooking pasta, searing meat
(goulash, pot roast), deep frying chips
The power function is suitable for heating large quantities of liquid.
Cleaning and care
WARNING!
Sharp objects and abrasive cleaning agents will damage the appliance. Clean the appliance
and remove the residues with water and washing up liquid after each use. Remove also the
remnants of the cleaning agents!
Scratches or dark stains on the glass ceramic that cannot be removed do not affect the
functioning of the appliance.
Cleaning the appliance after each use
1. Food containing sugar, plastics, tin foil residues should be removed at once using a
scraper. Place a scraper on the glass ceramic surface at an angle and remove residues
by sliding the blade over the surface. Wipe the appliance with a damp cloth and a little
washing up liquid. Finally, rub the appliance dry using a clean cloth .
2. Limescale rings, water rings, fat splashes, shiny metallic discolorations should be re-
moved after the appliance has cooled down using cleaner for glass ceramic or stainless
steel.
What to do if ...
Problem/Display Possible Cause Remedy
The cooking zones cannot be
switched on or are not operating
More than 10 seconds have
passed since the appliance was
switched on
The lock is switched on
Switch the appliance on again.
Switch off the lock (See the
section “Locking/unlocking the
control panel”)
Problem/Display Possible Cause Remedy
The child safety device is
switched on
Several sensor fields were
Automatic switch-off has been
There is water on the control
Display is switching between
two heat settings
The residual heat indicator is
not displaying anything
lights up
No cookware on the cooking
Diameter of the base of the
lights up
and number are displayed
Acoustic signal sounds when
appliance is switched off
Repeated acoustic signal (6x),
appliance switches off
Acoustic signal sounds and appliance switches itself on and
then off again; after 5 seconds
another acoustic signal sounds
touched at the same time
triggered
panel or the control panel is
covered with fat splashes
STOP+GO is activated
Power management is reducing the power of this cooking
zone
The cooking zone was only on
for a short time and is therefore
not hot
Unsuitable cookware Use suitable cookware
zone
cookware is too small for the
cooking zone
Automatic switch-off has been
triggered
Electronics fault Disconnect the appliance from
The control panel is wholly or
partly covered by objects.
One or more sensor fields have
been covered for longer than
10 seconds
The On/Off sensor field has
been covered up, e.g. by a cloth
Deactivate child safety device
(see the section "Child safety
device")
Only touch one sensor field
Remove any objects (pans, etc.)
that are lying on the control
panel. Switch appliance on
again
Wipe the control panel
Switch off STOP+GO
See the section “Switching the
power function on and off”
If the cooking zone is supposed
to be hot, call your local Service
Force Centre.
Put cookware on zone
Move to smaller cooking zone
Use suitable cookware
Switch appliance off. Switch
appliance on again
the electrical supply for a few
minutes (Take the fuse out of
the house’s wiring system) If
after switching on again,
displayed again, call the customer service department
Remove objects.
Uncover sensor field
Do not place any objects on the
control panel
What to do if ...
15
is
Disposal
16
If you are unable to remedy the problem by following the above suggestions, please
contact your local Service Force Centre.
WARNING!
Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be chargeable, even
during the warranty period.
Operating noises
Depending on the material and the processing of the base, the following noises may occur
when using induction cooking zones.
•Cracking noise
when using cookware made of different mate-
rials (Sandwich construction)
• Whistling
when using an individual cooking zone or sev-
eral cooking zones with high powers when the
cookware is made of different materials (Sandwich construction)
• Humming
can occur at high power levels
• Clicking
during electric switching processes
• Hissing, buzzing
The device is fitted with a fan for cooling the electrics. A whiring noise can be heard
when operating the fan which may deviate depending on the performance and may
continue for a while after the appliance is switched off.
The noises described are normal and do not refer to any defects.
1
1
1
2
2
3
2
3
Disposal
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact
your local council, your household waste disposal service or the shop where you purchased
the product.
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging
materials in the appropriate container at your local waste disposal facilities.
Safety information
Installation instructions
Safety information
WARNING!
This must be read!
The laws, ordinances, directives and standards in force in the country of use are to be
followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Installation may only be carried out by a qualified electrician. The minimum distances to
other appliances and units are to be observed.
Anti-shock protection must be provided by the installation, for example drawers may only
be installed with a protective floor directly underneath the appliance. The cut surfaces of
the worktop are to be protected against moisture using a suitable sealant.
The sealant seals the appliance to the work top with no gap. When building in, protect the
underside of the appliance from steam and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware
may be knocked off the rings when doors and windows are opened.
WARNING!
Risk of injury from electrical current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Follow connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection by installing correctly.
• The appliance must be connected to the electrical supply by a qualified electrician.
• Loose and inappropriate plug and socket connections can make the terminal overheat.
• Have the clamping connections correctly installed by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropriate mains cable of
type H05BB-F Tmax 90°C (or higher) must be used.
• If this appliance’s mains cable is damaged, it must be replaced by a special cable (type
H05BB-F Tmax 90°C; or higher). Please contact your local Service Force Center for further
advice.
A device must be provided in the electrical installation which allows the appliance to be
disconnected from the mains at all poles with a contact opening width of at least 3 mm
Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to
be removed from the holder), earth leakage trips and contactors.
17
Sticking on the seal
• Clean the worktop in the area of the cut-out section.
• Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge
of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch
it. The cut ends should lie in the middle of one side. When you have cut it to length (add
a few mm), press the two ends flush up against one another.
Safety information
18
Assembly
min. 5
min. 500
min.
50
600
min. 20
min. 25
min. 5
min. 55
490+1
min. 55
min. 5 min. 5
R5
min. 20
750+1
min. 38
min. 5
Rating Plate
Service
19
88032KF-N
949 593 117
55GBDC3AU
AEG-ELECTROLUX
Service
In the event of technical faults, please first check whether you can remedy the problem
yourself with the help of the operating instructions (section “What to do if…”).
If you were not able to remedy the problem yourself, please contact the Customer Care
Department or one of our service partners.
In order to be able to assist you quickly, we require the following information:
– Three-digit-letter combination
for glass ceramic
– Model description
– Product number (PNC)
– Serial number
(S No. - see the rating plate)
– Type of fault
– Any error messages displayed by
the appliance
Guarantee/Customer Service
Electrolux offer the following guarantee to the first purchaser of this appliance:-
1. The guarantee is valid for 24 months commencing when the appliance is handed over
to the first retail purchaser, which must be verified by purchase invoice or similar
documentation. The guarantee does not cover commercial use.
2. The guarantee covers all parts or components which fail due to faulty workmanship or
faulty material. The guarantee does not cover appliances where defects or poor performance are due to misuse, accidental damage, neglect, faulty installation, unauthorised modification or attempted repair, commercial use or failure to observe requirements and recommendations set out in the instruction book. This guarantee does not
cover such parts as light bulbs, removable glassware, or plastic.
3. Should guarantee repairs be necessary the purchaser must inform the nearest customer
service office (ELECTROLUX's service or authorised agent). ELECTROLUX reserves the
right to stipulate the place of repair (i.e. the customer’s home, place of installation or
ELECTROLUX workshop).
4. The guarantee or free replacement includes both labour and materials.
5. Repairs carried out under guarantee do not extend the guarantee period for the ap-
pliance. Parts removed during guarantee repairs become the property of ELECTROLUX.
202122
6. The Purchaser's statutory rights are not affected by this guarantee.
Service centres
• National Service Call Centre
• Tel:- 0861 56 56 56
• Fax:- 0861 567 567
Electrolux SA (Pty) Ltd
45 Neptune Street Paarden Eiland
Cape Town
7405
•PO Box 50
• Paarden Eiland
• 7420
• Switchboard:- 0027 21 506 6600
• Sales Fax:- 0027 21 506 6677
• Service Fax:- 0027 21 506 6691
Electrolux SA (Pty) Ltd
Ground Floor Sanlam Building
Cnr. Kempten Road & Margaret Ave.
Kempton Park
Johannesburg
1620
• PO Box 4551
• Kempton Park
• 1620
• Switchboard:- 0027 11 394 0036
• Sales Fax 0027 11 394 0039
• Service Fax 0027 11 394 0038
Electrolux SA (Pty) Ltd
53 Intersite Ave.
Umgeni Business Park
Durban
4091
• PO Box 626
• Hyper by the Sea
• 4053
• Switchboard:- 0027 31 263 0597
• Sales/Service Fax:- 0027 31 263 0679
23
www.electrolux.com
892930429-A-102008
Loading...