AEG-Electrolux 76331K-MN 05S User Manual
76331 K-MN
User Manual
Notice d’utilisation
Istruzioni per l'uso
Ceramic glass hob
Table de cuisson
vitrocéramique
Piano di cottura in
vetroceramica
2
The followi
1
Dear Customer
Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional
design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
In addition to this you find environmental and energy saving aspects as an integral part of our products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently.
To refer to this manual any time you need to, we recommend you to keep it in a
safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
ng symbols are used in this user information:
Warning! This must be read! Important advice for the safety of persons and
information on avoiding damage to the appliance
3 General information and advice
2 Information on environmental protection
z Dangerous voltage
Contents
Operating Instructions 4
Safety instructions 4
Description of the Appliance 6
Cooking surface layout 6
Control panel layout 6
Touch Control sensor fields 7
Displays 8
Residual heat indicator 8
Operating the appliance 9
Switching the appliance on and off 9
Setting the heat setting 9
Switching the outside ring on and off 10
Locking/unlocking the control panel 10
Switching the STOP+GO function on and off 11
Using the automatic warm-up function 12
Using the child safety device 13
Using the timer 14
Automatic switch off 16
Tips on Cooking and Frying 17
Cookware 17
Energy saving 17
Examples of cooking applications 18
Cleaning and Care 19
3
What to do if … 20
Disposal 21
Installation Instructions 22
Safety instructions 22
Guarantee/Customer Service Centres 24
Service 25
Assembly 74
Rating Plate 77
Operating Instructions4
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do not, any damage resulting is not
covered by the warranty.
Correct use
• This appliance is not intended for use by children or other persons whose
physical, sensory or mental capabilities or lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
• Do not leave the appliance unattended during operation.
• This appliance should be used only for normal domestic cooking and frying of
food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusi-
ble objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appliance on,
we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered
service engineers.
• Built-in appliances may only be used after they have built in to suitable builtin units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply, to prevent the possibility of an electric
shock.
• Repairs to the appliance must only be carried out by trained registered service
engineers.
5Safety instructions
Safety during use
• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
• There is the risk of burns from the appliance if used carelessly.
• Remove stickers and film from the glass ceramic.
• Cables from electrical appliances must not touch the hot surface of the appli-
ance or hot cookware.
• Switch the cooking zones off after each use.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or high-pres-
sure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by the cook-
ware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
scratch the glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass ceramic
and should be removed straightaway.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or
frying pans to boil dry.
• Do not use the cooking zones with empty cookware or without cookware.
Description of the Appliance6
Description of the Appliance
Cooking surface layout
Single cooking zone 1200 W
Triple cooking zone 800/1600/2300 W
Control panel layout
Child lock
with pilot light
STOP+GO
with pilot light
Cooking zone indicators
Automatic
warm-up function
Multi-purpose zone
Control panel Single cooking zone 1200 W
Timer function
Timer display
1500/2600 W
Multi-purpose zone
switch with pilot light
Heat setting indicator
Triple ring cooking zone switch with
On/Off
with power indicator
pilot lights
Heat setting selection
Timer
7Description of the Appliance
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals.
Touch the sensor fields from above, without covering other sensor fields.
Sensor field Function
On / Off To switch the appliance on and off
Child lock Locking control panel for children
Stop+Go To switch the Keep Warm setting on/
off
Triple ring switch To switch outer rings
on and off
TIMER Timer Timer selection
Increase settings To increase Timer time
Reduce settings To reduce Timer time
Multi-purpose zone switch To switch the outside ring on and off
Automatic warm-up func-
tion
To switch automatic warm-up function on/off
Control bar
The control bar is a special Touch Control field.
The control bar is touched where the desired heat setting is positioned. The heat
setting is shown in the display. Correct to
the left or the right, if necessary.
Do not release before the desired heat setting is reached.
3 If the control bar is touched for longer
than 6 seconds, a signal sounds and the
appliance switches itself off.
Description of the Appliance8
Displays
Display Description
Cooking zone is switched off
/ Keep Warm setting STOP+GO function / Keep Warm
setting is set
- Heat settings Heat setting is set
Automatic warm up func-
tion
Fault Malfunction has occurred
Residual heat Cooking zone is still hot
Child safety device Child safety device is engaged
Automatic switch off Switch off is active.
Automatic warm-up function is activated
Residual heat indicator
1 Warning! Risk of burns from residual heat. After being switched off, the cook-
ing zones need some time to cool down. Look at the residual heat indicator .
3 Residual heat can be used for melting and keeping food warm.
9Operating the appliance
Operating the appliance
Switching the appliance on and off
Control panel Display Pilot light
Switch on Touch for 1 second / lights up
Switch off Touch for 1 second / none goes out
3 After switching on, within approx. 10 seconds a heat setting or a function must
be set, otherwise the appliance automatically switches itself off.
Setting the heat setting
Control bar Display
To set the heat
setting
To switch off Touch 0
Touch the desired heat setting, if
necessary, correct to the left or the
right
to /
Operating the appliance10
Switching the outside ring on and off
By switching the outside rings on or off, the effective heating surface can be
matched to the size of the cookware.
3 Before an outside ring can be switched on, the inside ring must be switched on.
Triple ring cooking
Sensor field Pilot light
zone
To switch on the central
Touch 1-2 seconds Second pilot light lights
ring
To switch on the outer
Touch for 1-2 seconds Third pilot light lights up
ring
To switch off the outer
Touch for 1-2 seconds Third pilot light goes out
ring
To switch off the central
Touch for 1-2 seconds Second pilot light goes
ring
Multi-purpose zone Sensor field Pilot light
To switch on the outer
Touch 1-2 seconds Second pilot light lights
ring
To switch off the outer
ring
Touch for 1-2 seconds
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked
at any time in order to prevent the settings being changed e.g. by wiping over
the panel with a cloth.
up
out
up
Second pilot light goes
out
Control panel Display
Switch on Touch (for 4 seconds)
Switch off Touch previously set heat setting
3 When you switch the appliance off, the locking function is automatically
switched off.
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that are
switched on to the keep warm setting and then back to the heat setting that
was previously set.
Control panel Display
To switch on Touch
To switch off Touch heat setting that was previously
set (not automatic warm up function)
3 Timer functions are not stopped by STOP+GO.
3 STOP+GO locks the whole control panel except the sensor field .
11Operating the appliance
Operating the appliance12
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function. When
setting a heat setting using the automatic warm-up function, the cooking zone
switches to full power for a certain amount of time and then automatically
switches back to the heat setting set.
Step Control panel Display
1. Touch
2. Move your finger down from to se-
lect the desired heat setting between
and
The length of time that the automatic warm up function operates depends on
the heat setting selected.
/ ,
after 5 seconds .
As long as is displayed,
the appliance works at full
power.
After the automatic warm
up is completed, the heat
setting / is displayed again.
Heat setting Length of the automatic warm up
[min:sec]
1 1:00
2 1:40
3 2:40
4 4:50
5 5:30
6 6:30
7 8:10
8 10:10
9 12:20
10
11
12
13
14
2:30
2:30
3:30
4:30
---
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Switching on the child safety device
Step Control panel Display/Signal
1. Switch on appliance. (Do not set a
heat setting.)
2. Touch for 4 seconds
The child safety device is switched on.
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards.
Step Control panel Display/Signal
1. Switch appliance on
2. Touch for 4 seconds lights up
Until the appliance is next switched off, it can used as normal.
13Operating the appliance
3 After overriding the child safety device, a heat setting or a function must be set
within approx. 10 seconds, otherwise the appliance automatically switches itself
off.
Switching off the child safety device
Step Control panel Display/Signal
1. Switch appliance on
2. Touch for 4 seconds lights up
3. Switch appliance off.
The child safety device is switched off.
Operating the appliance14
Using the timer
Function Condition Outcome after the
time has elapsed
Automatic cut-out a heat setting is set acoustic signal
00 flashes
Cooking zone switches
off
Countdown timer cooking zones not in use acoustic signal
00 flashes
3 If a heat setting is set on this cooking zone in addition to a countdown timer,
the cooking zone is switched off after the time set has elapsed.
3 If a cooking zone is switched off, the timer function set is also switched off.
Selecting a cooking zone
Step Control panel Display
1. Touch TIMER once Pilot light of the first cook-
ing zone flashes
2. Touch TIMER once Pilot light of the second
cooking zone flashes
3. Touch TIMER once Pilot light of the third
cooking zone flashes
4. Touch TIMER once Pilot light of the fourth
cooking zone flashes
3 If the pilot light is flashing more slowly, the heat setting can be set or modified.
3 If other timer functions are set, after a few seconds the shortest remaining time
of all the timer functions is displayed and the corresponding pilot light flashes.
15Operating the appliance
Setting the time
Step Control panel Indicator
1. Select TIMER cook-
ing zone
2. Touch or 00 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Pilot light for the cooking zone selected
flashes
Switching off the timer function
Step Control panel Indicator
1. Select TIMER cook-
ing zone
2. Touch The time remaining counts backwards to
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Pilot light of cooking zone selected flashes faster
Time remaining is displayed
00.
Changing the time
Step Control panel Indicator
1. Select TIMER cook-
ing zone
2. Touch or 01 to 99 minutes
After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.
Pilot light of the selected cooking zone
flashes faster
Time remaining is displayed
Displaying the time remaining for a cooking zone
Step Control panel field Display
1. TIMER Select cook-
ing zone
After a few seconds the pilot light flashes more slowly.
Pilot light of the cooking zone selected
flashes faster
The time remaining is displayed
Operating the appliance16
Switching off the acoustic signal
Step Control panel field Acoustic signal
1. Touch TIMER Acoustic signal to acknowledge.
Acoustic signal stops.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.) for
longer than approx. 10 seconds, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor fields on the
control panel are covered for more that 10 seconds, an acoustic signal sounds.
The acoustic signal switches itself off automatically when the sensor fields are
no longer covered.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off automatically. is displayed. Before being used again, the cooking zone must be set
to .
Heat setting Switches off after
1 - 3 6 hours
4 - 6 5 hours
7 - 8 4 hours
9 -14 1.5 hours
Tips on Cooking and Frying
17Tips on Cooking and Frying
3
Information on acrylamides
According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures
and not browning foods too much.
Cookware
• You can recognise good cookware from the bottoms of the pans. The bottom
should be as thick and flat as possible.
• Cookware made of enamelled steel or with aluminium or copper bottoms can
leave discolorations on the glass ceramic surface which are difficult or impossible to remove.
Energy saving
2 Always place cookware on the cooking
zone before it is switched on.
2 If possible, always place lids on the pans.
2 Switch cooking zones off before the end of
the cooking time, to take advantage of residual heat.
2 Bottom of pans and cooking zones should
be the same size.
Tips on Cooking and Frying18
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
setting
9-12
12-13
Cooking-
process
0 Residual heat, Off position
Keeping
1
food warm
1-3
3-5
5-7
7-9 Boiling
Melting
Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on
Simmer-
ing on low
heat
Steaming
Braising
Gentle
Frying
Heavy
Frying
Boiling
Searing
14
Deep
frying
suitable for
Keeping cooked foods warm as required Cover
Hollandaise sauce,
melting butter, chocolate,
gelatine
Simmering rice and milk-
based dishes
Heating up ready-cooked
meals
Steaming vegetables, fish
braising meat
Steaming potatoes 20-60 mins.
Cooking larger quantities of
food, stews and soups
Frying escalopes, veal cor-
don bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts
Hash browns, loin steaks,
steaks, Flädle (pancakes for
garnishing soup)
Boiling large quantities of water, cooking pasta, searing meat (goulash,
Cooking
time
5-25 mins. Stir occasionally
25-50 mins.
With vegetables add only
20-45 mins.
60-150 mins.
Steady frying
5-15 mins.
per pan
pot roast), deep frying chips
a little liquid (a few table-
Use only a little liquid, e.
Tips/Hints
Add at least twice as
much liquid as rice, stir
milk dishes part way
through cooking
spoons)
g.: max.
¼ l water for
750 g potatoes
Up to 3 l liquid plus in-
gredients
Turn halfway through
cooking
Turn halfway through
cooking
Cleaning and Care
19Cleaning and Care
1
Take care! Risk of burns from residual heat.
1 Warning! Sharp objects and abrasive cleaning materials will damage the appli-
ance. Clean with water and washing up liquid.
1 Warning! Residues from cleaning agents will damage the appliance. Remove
residues with water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place a scraper on the glass ceramic surface at an angle.
2. Remove residues by sliding the blade over the surface.
3. Wipe the appliance with a damp cloth and a little washing up liquid.
4. Rub the appliance dry using a clean cloth.
Remove
Type of dirt
sugar, food containing sugar yes ---
plastics, tin foil yes --limescale and water rings --- yes
fat splashes --- yes
shiny metallic discolouration --- yes
immedi-
ately
when the appliance has
cooled down
using
a scraper*
cleaner for glass ceram-
ic or stainless steel*
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops
3 Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
3 Scratches or dark stains on the glass ceramic that cannot be removed do not
however affect the functioning of the appliance.
What to do if …20
What to do if …
Problem Possible cause Remedy
The cooking zones will not
switch on or are not functioning
Acoustic signal sounds when
appliance is switched off
The residual heat indicator is
not displaying anything
Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic signal sounds
lights up Automatic switch-off has
and number are displayed Electronics fault Disconnect the appliance from
More than 10 seconds have
passed since the appliance was
switched on
The child safety device is
switched on
Several sensor fields were
touched at the same time
Automatic switch off has been
triggered
There is water on the control
panel or the control panel is
covered with fat splashes
STOP+GO is activated Switching off STOP+GO
The control panel is wholly or
partly covered by objects.
The cooking zone was only on
for a short time and is therefore not hot
The On/Off sensor field has
been covered up, e.g. by a
cloth
been triggered
Switch the appliance on again.
Deactivate the child safety device (See the section “Child
safety device”)
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again
Wipe the control panel
Remove objects.
If the cooking zone is supposed to be hot, call the Customer Service Department.
Do not place any objects on
the control panel
Switch appliance off. Switch
appliance on again
the electrical supply for a few
minutes (Take the fuse out of
the house’s wiring system)
If after switching on again,
is displayed again, call the customer service department
If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the Customer Care Department.
1 Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
21Disposal
3 If the appliance has been wrongly operated, the visit from the customer service
technician or dealer may not take place free of charge, even during the warranty period.
Disposal
2
Packaging material
The packaging materials are environmentally friendly and can be recycled. The
plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community
waste disposal facilities.
2 Old appliance
The symbol W on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you
purchased the product.
3 Where should you take your old machines?
You can return these to any shop selling new machines or dispose of them at
official S.EN.S collection points or official S.EN.S recycling facilities.
The official S.EN.S collection points are listed at www.sens.ch.
1 Warning: So that the old appliance can no longer cause any danger, make it
unusable before disposing of it.
To do this, disconnect the appliance from the mains supply and remove
the mains cable from the appliance.
Installation Instructions22
Installation Instructions
1
Safety instructions
Warning! This must be read!
The laws, ordinances, directives and standards in force in the country of use are
to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed.
Anti-shock protection must be provided by the installation, for example drawers
may only be installed with a protective floor directly underneath the appliance.
The cut surfaces of the worktop are to be protected against moisture using a
suitable sealant.
The sealant seals the appliance to the work top with no gap.
Do not use silicon sealant between the appliance and the work top.
Avoid installing the appliance next to doors and under windows. Otherwise hot
cookware may be knocked off the rings when doors and windows are opened.
z Risk of injury from electrical current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Follow connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection by installing correctly.
The appliance must be connected to the electrical supply by a qualified electrician.
•
z Risk of injury from electrical current.
• Loose and inappropriate plug and socket connections can make the terminal
overheat.
• Have the clamping connections correctly installed by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropriate mains
cable of type H05BB-F Tmax 90°C(or higher) must be used.
• If this appliance’s mains cable is damaged, it must be replaced by a special cable (type H05BB-F Tmax 90°C; or higher). The latter is available from the Customer Care Department.
23Installation Instructions
A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening
width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.
Installation Instructions24
Garantie/Kundendienst,Garantie/service-clientèle, Garanzia/Servizio clienti, Guarantee/Customer Service Centres
Points de Service
3018 Bern
Morgenstrasse 131
Servizio dopo vendita
1028 Préverenges
Le Trési 6
Point of Service
6916 Grancia
Zona Industriale E
/Vendita pezzi di ricambio/spare parts service
Servicestellen
5506 Mägenwil/Zürich
Industriestrasse 10
9000 St. Gallen
Zürcherstrasse 204 e
4127 Birsfelden
Hauptstrasse 52
6020 Emmenbrücke
Seetalstrasse 11
7000 Chur
Comercialstrasse 19
Ersatzteilverkauf/Points de vente de rechange
5506 Mägenwil, Industriestrasse 10, Tel. 0848 848 023
Fachberatung/Verkauf/Demonstration/Vente/Consulente (cucina)/Vendita
8048 Zürich, Badenerstrasse 587, Tel. 044 405 81 11
Garantie
Für jedes Produkt gewähren wir ab Verkauf bzw. Lieferdatum an den Endverbraucher eine Garantie von 2
Jahren. (Ausweis durch Garantieschein, Faktura oder Verkaufsbeleg).
Die Garantieleistung umfasst die Kosten für Material, Arbeits- und Reisezeit. Die Garantieleistung entfällt
bei Nichtbeachtung der Gebrauchsanweisung und Betriebs-vorschriften, unsachgerechter Installation, sowie
bei Beschädigung durch äussere Einflüsse, höhere Gewalt, Eingriffe Dritter und Verwendung von NichtOriginal Teilen.
Garantie
Nous octroyons sur chaque produit 2 ans de garantie à partir de la date de livraison ou de la mise en service
au consommateur (documenté au moyen d’une facture, d’un bon de garantie ou d’un justificatif d’achat).
Notre garantie couvre les frais de mains d’œuvres et de déplacement, ainsi que les pièces de rechange. Les
conditions de garantie ne sont pas valables en cas d’intervention d’un tiers non autorisé, de l’emploi de pièces de rechange non originales, d’erreurs de maniement ou d’installation dues à l’inobser-vation du mode
d’emploi, et pour des dommages causés par des influences extérieures ou de force majeure.
Garanzia
Per ogni prodotto concediamo una garanzia di 2 anni a partire dalla data di consegna o dalla sua messa in
funzione. (fa stato la data della fattura, del certificato di garanzia o dello scontrino d’acquisto) Nella garanzia sono comprese le spese di manodopera, di viaggio e del materiale.
Dalla copertura sono esclusi il logoramento ed i danni causati da agenti esterni, intervento di terzi, utilizzo
di ricambi non originali o dalla inosservanza delle prescrizioni d’istallazione ed istruzioni per l’uso.
Warranty
For each product we provide a two-year guarantee from the date of purchase or delivery to the consumer
(with a guarantee certificate, invoice or sales receipt serving as proof). The guarantee covers the costs of
materials, labour and travel. The guarantee will lapse if the operating instructions and conditions of use are
not adhered to, if the product is incorrectly installed, or in the event of damage caused by external influences, force majeure, intervention by third parties or the use of non-genuine components.
Loading...