AEG-Electrolux 66331KF-N User Manual

66331 KF-N

User manual Ceramic glass hob

2

The followi

1

Dear Customer

Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional
design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best per­formance and control - indeed we are setting the highest standards of excel­lence.
In addition to this you find environmental and energy saving aspects as an inte­gral part of our products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfect­ly and most efficiently.
To refer to this manual any time you need to, we recommend you to keep it in a
safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.

ng symbols are used in this user information:

Warning! This must be read! Important advice for the safety of persons and
information on avoiding damage to the appliance

3 General information and advice

2 Information on environmental protection

z Dangerous voltage

Contents

Operating Instructions 4

Safety instructions 4

Description of the Appliance 6

Cooking surface layout 6
Control panel layout 6

Touch Control sensor fields 7
Displays 8
Residual heat indicator 8

Operating the appliance 9

Switching the appliance on and off 9
Setting the heat setting 9
Switching the outside ring on and off 9
Locking/unlocking the control panel 10
Switching the STOP+GO function on and off 10
Using the automatic warm-up function 11
Using the child safety device 12
Using the timer 13
Automatic switch off 15

Tips on Cooking and Frying 16

Cookware 16
Energy saving 16
Examples of cooking applications 17

Cleaning and Care 18

3Contents

What to do if … 19

Disposal 20

Installation Instructions 21

Safety instructions 21

Assembly 23

Rating Plate 25

Guarantee/Customer Service 26

Service 31

Operating Instructions4

Operating Instructions

1 Safety instructions

Please comply with these instructions. If you do not, any damage resulting is not
covered by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose
physical, sensory or mental capabilities or lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruc­tion by a responsible person to ensure that they can use the appliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and frying of

food.

• The appliance must not be used as a work surface or as a storage surface.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or fusi-

ble objects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

• To avoid small children and pets unintentionally switching the appliance on,

we recommend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered
service engineers.

• Built-in appliances may only be used after they have built in to suitable built­in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be switched off and discon­nected from the electrical supply, to prevent the possibility of an electric
shock.

• Repairs to the appliance must only be carried out by trained registered service
engineers.

5Safety instructions

Safety during use

• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

• There is the risk of burns from the appliance if used carelessly.

• Remove stickers and film from the glass ceramic.

• Cables from electrical appliances must not touch the hot surface of the appli-

ance or hot cookware.

• Switch the cooking zones off after each use.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or high-pres-

sure cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by the cook-

ware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can
scratch the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceramic
and should be removed straightaway.

• To avoid damaging cookware and glass ceramics, do not allow saucepans or
frying pans to boil dry.

• Do not use the cooking zones with empty cookware or without cookware.

Description of the Appliance6

Description of the Appliance

Cooking surface layout

Single cooking zone

1200 W

Multi-purpose zone

1500/2400 W

Triple cooking zone

800/1600/2300 W

Control panel layout

Child lock with

pilot light

STOP+GO

with pilot light

Triple ring cooking zone switch

On/Off
with power indicator

with pilot lights

Cooking zone indicators

Timer function

Automatic

warm-up function

Control panel Single cooking zone

Timer display

Heat setting selection

Timer

1200 W

Multi-purpose zone

switch with pilot light

Heat setting indicator

7Description of the Appliance

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are con­trolled by touching sensor fields and confirmed by displays and acoustic signals.
Touch the sensor fields from above, without covering other sensor fields.

Sensor field Function

On / Off To switch the appliance on and off

Child lock Locking control panel for children

Stop+Go To switch the Keep Warm setting on/

off

Triple ring switch To switch outer rings

on and off

Timer Timer selection

Increase settings To increase Timer time
Reduce settings To reduce Timer time

Multi-purpose zone switch To switch the outside ring on and off

Automatic warm-up func-

tion

To switch automatic warm-up func­tion on/off

Control bar

The control bar is a special Touch Control field.
The control bar is touched where the de­sired heat setting is positioned. The heat
setting is shown in the display. Correct to
the left or the right, if necessary.
Do not release before the desired heat set­ting is reached.

3 If the control bar is touched for longer

than 6 seconds, a signal sounds and the
appliance switches itself off.

Description of the Appliance8

Displays

Display Description

Cooking zone is switched off
/ Keep Warm setting STOP+GO function / Keep Warm

setting is set

- Heat settings Heat setting is set
Automatic warm up func-

tion
Fault Malfunction has occurred
Residual heat Cooking zone is still hot
Child safety device Child safety device is engaged
Automatic switch off Switch off is active.

Automatic warm-up function is acti­vated

Residual heat indicator

1 Warning! Risk of burns from residual heat. After being switched off, the cook-

ing zones need some time to cool down. Look at the residual heat indicator .

3 Residual heat can be used for melting and keeping food warm.

9Operating the appliance

Operating the appliance

Switching the appliance on and off

Control panel Display Pilot light

Switch on Touch for 1 second / lights up
Switch off Touch for 1 second / none goes out

3 After switching on, within approx. 10 seconds a heat setting or a function must

be set, otherwise the appliance automatically switches itself off.

Setting the heat setting

Control bar Display

To set the heat
setting

To switch off Touch 0

Touch the desired heat setting, if
necessary, correct to the left or the
right

to /

Switching the outside ring on and off

By switching the outside rings on or off, the effective heating surface can be
matched to the size of the cookware.

3 Before an outside ring can be switched on, the inside ring must be switched on.

Triple ring cooking zone Sensor field Pilot light

To switch on the central
ring

To switch on the outer ring Touch for 1-2 seconds Third pilot light lights

To switch off the outer ring Touch for 1-2 seconds Third pilot light goes

To switch off the central
ring

Multi-purpose zone Sensor field Pilot light

To switch on the outer
ring

To switch off the outer
ring

Touch 1-2 seconds Second pilot light

lights up

up

out

Touch for 1-2 seconds Second pilot light goes

out

Touch 1-2 seconds Second pilot light lights

up

Touch for 1-2 sec­onds

Second pilot light goes
out

Operating the appliance10

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked
at any time in order to prevent the settings being changed e.g. by wiping over
the panel with a cloth.

Control panel Display

Switch on Touch (for 4 seconds)
Switch off Touch previously set heat setting

3 When you switch the appliance off, the locking function is automatically

switched off.

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that are
switched on to the keep warm setting and then back to the heat setting that
was previously set.

Control panel Display

To switch on Touch
To switch off Touch heat setting that was previously

set (not automatic warm up func­tion)

3 Timer functions are not stopped by STOP+GO.
3 STOP+GO locks the whole control panel except the sensor field .

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When set­ting a heat setting using the automatic warm-up function, the cooking zone
switches to full power for a certain amount of time and then automatically
switches back to the heat setting set.

Step Control panel Display

1. Touch

2. Move your finger down from to se-

lect the desired heat setting between

and

The length of time that the automatic warm up function operates depends on
the heat setting selected.

11Operating the appliance

/ ,

after 5 seconds .
As long as is displayed,
the appliance works at full
power.
After the automatic warm
up is completed, the heat
setting / is dis­played again.

Heat setting Length of the automatic warm up

[min:sec]

1 1:00

2 1:40

3 2:40

4 4:50

5 5:30

6 6:30

7 8:10

8 10:10

9 12:20

10
11
12
13
14

2:30

2:30

3:30

4:30

---

Operating the appliance12

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Switching on the child safety device

Step Control panel Display/Signal

1. Switch on appliance. (Do not set
a heat setting.)

2. Touch for 4 seconds

The child safety device is switched on.

Switching off the child safety device

Step Control panel Display/Signal

1. Switch on appliance. (Do not set
a heat setting.)

2. Touch for 4 seconds lights up

3. Switch appliance off.

The child safety device is switched off.

3 The child safety device can only be switched on and off, if no heat setting is set.

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking ses­sion; it remains activated afterwards.

Step Control panel Display/Signal

1. Switch appliance on

2. Touch for 4 seconds lights up

Until the appliance is next switched off, it can used as normal. After switching
off the appliance, the child safety device is active again.

3 After overriding the child safety device, a heat setting or a function must be set

within approx. 10 seconds, otherwise the appliance automatically switches itself
off.

13Operating the appliance

Using the timer

Function Condition Outcome after the

time has elapsed

Automatic cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone switches

off

Countdown timer cooking zones not in use acoustic signal

00 flashes

3 If just one countdown value is set you can change it only when the appliance is

switched on.

3 If a heat setting is set on this cooking zone in addition to a countdown timer,

the cooking zone is switched off after the time set has elapsed.

3 If a cooking zone is switched off, the timer function set is also switched off.

Selecting a cooking zone

Step Control panel Display

1. Touch TIMER once Pilot light of the first cook-

ing zone flashes

2. Touch TIMER once Pilot light of the second

cooking zone flashes

3. Touch TIMER once Pilot light of the third

cooking zone flashes

4. Touch TIMER once Pilot light of the fourth

cooking zone flashes

3 If other timer functions are set, after a few seconds the shortest remaining time

of all the timer functions is displayed and the corresponding pilot light flashes.

Operating the appliance14

Setting the time

Step Control panel Indicator

1. Select TIMER cook-

ing zone

2. Touch or 00 to 99 minutes

After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.

Pilot light for the cooking zone selected
flashes

Switching off the timer function

Step Control panel Indicator

1. Select TIMER cook-

ing zone

2. Touch The time remaining counts backwards to

The pilot light goes out.
The Timer function for the selected cooking zone is switched off.

Pilot light of cooking zone selected flash­es faster
Time remaining is displayed

00.

Changing the time

Step Control panel Indicator

1. Select TIMER cook-

ing zone

2. Touch or 01 to 99 minutes

After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.

Pilot light of the selected cooking zone
flashes faster
Time remaining is displayed

Displaying the time remaining for a cooking zone

Step Control panel field Display

1. TIMER Select cook-

ing zone

After a few seconds the pilot light flashes more slowly.

Pilot light of the cooking zone selected
flashes faster
The time remaining is displayed

Switching off the acoustic signal

Step Control panel field Acoustic signal

1. Touch TIMER Acoustic signal to acknowledge.

Acoustic signal stops.

Automatic switch off

Cooking surface

• If after switching on the cooking surface, a heat setting is not set for a cook-

ing zone within approx. 10 seconds, the cooking surface automatically switch­es itself off.

• If one or more sensor fields are covered by objects (a pan, cloths, etc.) for

longer than approx. 10 seconds, a signal sounds and the cooking surface
switches off automatically.

• If all cooking zones are switched off, the cooking surface automatically

switches itself off after approx. 10 seconds.

Control panel

• When the appliance is switched off, if one or more of the sensor fields on the

control panel are covered for more that 10 seconds, an acoustic signal sounds.
The acoustic signal switches itself off automatically when the sensor fields are
no longer covered.

15Operating the appliance

Cooking zones

• If one of the cooking zones is not switched off after a certain time, or if the

heat setting is not modified, the relevant cooking zone switches off automati­cally. is displayed. Before being used again, the cooking zone must be set to

.

Heat setting Switches off after

1 - 3 6 hours
4 - 7 5 hours
8 - 9 4 hours
10 -14 1.5 hours

Tips on Cooking and Frying16

Tips on Cooking and Frying

3

Information on acrylamides

According to the latest scientific knowledge, intensive browning of food, espe­cially in products containing starch, can constitute a health risk due to acryla­mides. Therefore we recommend cooking at the lowest possible temperatures
and not browning foods too much.

Cookware

• You can recognise good cookware from the bottoms of the pans. The bottom

should be as thick and flat as possible.

• Cookware made of enamelled steel or with aluminium or copper bottoms can

leave discolorations on the glass ceramic surface which are difficult or impos­sible to remove.

Energy saving

2 Always place cookware on the cooking

zone before it is switched on.

2 If possible, always place lids on the pans.

2 Switch cooking zones off before the end of

the cooking time, to take advantage of re­sidual heat.

2 Bottom of pans and cooking zones should

be the same size.

Examples of cooking applications

The information given in the following table is for guidance only.

17Tips on Cooking and Frying

Heat

setting

9-12

12-13

Cooking-

process

0 Residual heat, Off position

Keeping

1

food warm

1-3

3-5

5-7

7-9 Boiling

Melting

Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on

Simmer-

ing on low

heat

Steaming

Braising

Gentle
Frying

Heavy

Frying

Boiling

Searing

14

Deep

frying

suitable for

Keeping cooked foods warm as required Cover

Hollandaise sauce,

melting butter, chocolate,

gelatine

Simmering rice and milk-

based dishes

Heating up ready-cooked

meals

Steaming vegetables, fish

braising meat

Steaming potatoes 20-60 mins.

Cooking larger quantities of

food, stews and soups

Frying escalopes, veal cor-

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts

Hash browns, loin steaks,

steaks, Flädle (pancakes for

garnishing soup)

Boiling large quantities of water, cooking pasta, searing meat (goulash,

Cooking

time

5-25 mins. Stir occasionally

25-50 mins.

With vegetables add only

20-45 mins.

60-150 mins.

Steady frying

5-15 mins.

per pan

pot roast), deep frying chips

a little liquid (a few table-

Use only a little liquid, e.

Tips/Hints

Add at least twice as

much liquid as rice, stir

milk dishes part way

through cooking

spoons)

g.: max.

¼ l water for

750 g potatoes

Up to 3 l liquid plus in-

gredients

Turn halfway through

cooking

Turn halfway through

cooking

Cleaning and Care18

Cleaning and Care

1

Take care! Risk of burns from residual heat.

1 Warning! Sharp objects and abrasive cleaning materials will damage the appli-

ance. Clean with water and washing up liquid.

1 Warning! Residues from cleaning agents will damage the appliance. Remove

residues with water and washing up liquid.

Cleaning the appliance after each use

1. Wipe the appliance with a damp cloth and a little washing up liquid.

2. Rub the appliance dry using a clean cloth.

Removing deposits

1. Place a scraper on the glass ceramic surface at an angle.

2. Remove residues by sliding the blade over the surface.

3. Wipe the appliance with a damp cloth and a little washing up liquid.

4. Rub the appliance dry using a clean cloth.

Remove

Type of dirt

sugar, food containing sugar yes ---

plastics, tin foil yes ---

limescale and water rings --- yes

fat splashes --- yes

shiny metallic discolouration --- yes

immedi-

ately

when the appliance has

cooled down

using

a scraper*

cleaner for glass ceram-

ic or stainless steel*

*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops

3 Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
3 Scratches or dark stains on the glass ceramic that cannot be removed do not

however affect the functioning of the appliance.

19What to do if …

What to do if …

Problem Possible cause Remedy

The cooking zones will not
switch on or are not func­tioning

Acoustic signal sounds when
appliance is switched off

The residual heat indicator is
not displaying anything

Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic sig­nal sounds

lights up Automatic switch-off has

and number are displayed Electronics fault Disconnect the appliance from

More than 10 seconds have
passed since the appliance was
switched on

The child safety device is
switched on

Several sensor fields were
touched at the same time

Automatic switch off has been
triggered

There is water on the control
panel or the control panel is
covered with fat splashes

STOP+GO is activated Switching off STOP+GO

The control panel is wholly or
partly covered by objects.

The cooking zone was only on
for a short time and is there­fore not hot

The On/Off sensor field has
been covered up, e.g. by a
cloth

been triggered

Switch the appliance on again.

Deactivate the child safety de­vice (See the section “Child
safety device”)

Only touch one sensor field

Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again

Wipe the control panel

Remove objects.

If the cooking zone is supposed
to be hot, call the Customer
Service Department.

Do not place any objects on the
control panel

Switch appliance off. Switch
appliance on again

the electrical supply for a few
minutes (Take the fuse out of
the house’s wiring system)
If after switching on again,
is displayed again, call the cus­tomer service department

If you are unable to remedy the problem by following the above sugges­tions, please contact your local Service Force Centre.

1 Warning! Repairs to the appliance are only to be carried out by qualified service

engineers. Considerable danger to the user may result from improper repairs.

3 If the appliance has been operated incorrectly, the engineer's visit will be

chargeable, even during the warranty period.

Disposal20

Disposal

2

Packaging material

The packaging materials are environmentally friendly and can be recycled. The
plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dis­pose of the packaging materials in the appropriate container at the community
waste disposal facilities.

2 Old appliance

The symbol W on the product or on its packaging indicates that this product

may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equip­ment. By ensuring this product is disposed of correctly, you will help prevent po­tential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you
purchased the product.

Installation Instructions

21Installation Instructions

1

Safety instructions

Warning! This must be read!
The laws, ordinances, directives and standards in force in the country of use are
to be followed (safety regulations, proper recycling in accordance with the regu­lations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed.
Anti-shock protection must be provided by the installation, for example drawers
may only be installed with a protective floor directly underneath the appliance.
The cut surfaces of the worktop are to be protected against moisture using a
suitable sealant.
The sealant seals the appliance to the work top with no gap.
Avoid installing the appliance next to doors and under windows. Otherwise hot
cookware may be knocked off the rings when doors and windows are opened.

z Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Follow connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection by installing correctly.

• The appliance must be connected to the electrical supply by a qualified elec-

trician.

z Risk of injury from electrical current.

• Loose and inappropriate plug and socket connections can make the terminal

overheat.

• Have the clamping connections correctly installed by a qualified electrician.

• Use strain relief clamp on cable.

n the event of single-phase or two-phase connection, the appropriate mains ca-

• I

ble of type H05BB-F Tmax 90°C(or higher) or an equivalent type must be used.

• If this appliance’s mains cable is damaged, it must be replaced by a special ca-

ble (type H05BB-F Tmax 90°C; or higher) or an equivalent type. The latter is
available from the Customer Care Department.

A device must be provided in the electrical installation which allows the appli­ance to be disconnected from the mains at all poles with a contact opening
width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw type fus­es are to be removed from the holder), earth leakage trips and contactors.

Installation Instructions22

Sticking on the seal

• Clean the worktop around the cut-out area.

• Stick the single-sided adhesive sealing tape provided on the underside of the

hob around the outside edge ensuring that it is not stretched. The two ends
of the tape should join in the middle of one side. After trimming the tape (al­low it to overlap by 2-3 mm), press the two ends together.

Assembly

23Assembly

Assembly24

25Assembly

Rating Plate

66331KF-N

55HAD56AO

AEG-ELECTROLUX

230 V 50 Hz

949 592 865

7,1 kW

Guarantee/Customer Service26

Guarantee/Customer Service

Weitere Kundendienststellen im Ausland

In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese
können dort eingesehen werden.

Further after-sales service agencies overseas

In these countries our AEG-Electrolux agents’ own guarantee conditions are
applicable. Please obtain further details direct.

Autres agences étrangères assurant le service après-vente

Dans ces pays, les conditions de garantie des concessionnaires de la région
sont valables. Vous pouvez les consulter sur place.

Otros puntos de Postventa en el extranjero

En estos países rigen las condiciones de nuestros representantes locales. las
cuales pueden ser consultadas allí mismo.

Ulteriori uffici del servizio tecnico assistenza clienti all’estero

In questi paesi sono valide le condizioni di garanzia dei partner locali. Queste
condizioni possono essere esaminante sul luogo.

Serviços de assistência técnica no estrangeiro

Nestes países são válidas as condições de garantia dos concessionários locais,
podendo aí ser consultadas.

További vevöszolgálati irodák külföldön

Ezekben az országokban a mi AEG-Electrolux vevöszolgálatainknál saját
jótállási feltételek alkalmazhatók. A további adatokat kérjük közvetlenül
szerezzék be.

Servisne službe

Na garancijskem listu boste našli seznam pooblašèenih servisnih služb
AEG-Electrolux.

U.A.E. Abu Dhabi

Universal Trading Company
P.O. Box 43 99
Tel.: [phone]
Service Center 6733974

Egypt

Middle East Commercial
Center
4 Salah El Dein St. - 2nd floor
Heliopolis, Kairo
Egypt
Tel.: [phone]

Jordan

Jordan Household
Supply Co. Ltd.
P.O. Box 3/68
Amman/Tel.: 69 70 50

Canada

EURO-LINE Appliances
2150 Winston PARK Drive 20
Oakville, Ontario L6H 5V1
Tel.: [phone]
Fax: [phone]

Malta

ITC
International Trading Company
White House Building
Mountbatte Street
Blata L-Bajda/Tel.: 220644

Mauritius

Happy World Centre Ltd.
P.O. 7 54
1 Chausee Street
Port Louis
Tel.: 25355

27Guarantee/Customer Service

Australia

The Andi-Co Group
1 Stamford Road
Oakleigh VIC 3166
Tel.: [phone]
Fax: [phone]
www.andico.com.au

Bahrain/Arabian Gulf

A.A. Zayani & Sons
P.O. Box 9 32
Bahrain
Tel.: [phone]

Bulgaria

Electrolux Bulgaria E.O.O.D.
91 Levski Blvd.
1000 Sofia
Tel.: [phone]
Fax. [phone]

Cyprus

Hadjikyrlakos & Sons Ltd.
Prodromou 121
P.O. Box 21587
Nicosia 1511
Service Telephones:
Nicosia 02 481226
Limassol 05 562182
Larnaca 04 633929
Paphos 06 932 699

Estonia

Electrolux Estonia Ltd.
Mustamäe tee 24
EE0006 Tallinn
Tel.: [phone]
Fax: [phone]

Hong Kong

Dah Chong Hong Ltd.
20 Kai Cheung Road
Kowloon Bay
Kowloon - Hong Kong
Tel.: [phone]
Fax: [phone]

Israel

Evis Ltd.
Tadiran-Ampa Service
10 Gibonay Israel Street
New Industrial Zone
Netanya, 42504
Israel

Korea (South)

Core Incorp.
3/F Chewoo Bldg.
200 Nonhyun-Dong
Kangnam-Ku 135-010
Seoul
Telefon [phone]

Croatia

Electrolux D.O.O.
Suplova 7
10000 Zagreb
Tel.: [phone]
Fax: [phone]

Kuwait/Arabian Gulf

Ali Al-Ghanim Est.
P.O. Box 21540 - Safat
Tel.: [phone]
Fax: [phone]

Lebanon

Adib & Assaferi
P.O. Box 539
Tripoli

Latvia

Electrolux Latvija Ltd.
Kr.Barona iela 130/2
Riga, LV-1012
Tel.: [phone]
Fax: [phone]

Lithuania

Electrolux Lithuania
Verkui 29
2600 Vilnus
Tel.: [phone]
Fax: [phone]

Malaysia

Arzbergh Engineering
No. 49A/B, Jalan Petaling
Utama 7
4600 Petaling Jaya
Tel.: [phone]
Fax: [phone]

Namibia

AEG NAMIBIA (PTY)
LIMITED-Jeppe Street
Northern Industrial Area
Windhoek
Tel.: [phone]
Fax: [phone]

New Zealand

Monaco Corporation Ltd.
10 Rothwell Avenue
Albany - Auckland
4399 Auckland 1
New Zealand
Tel.: [phone]
Fax: [phone]

Syria

WATTAR CO.
P.O. Box 36109
Mazzeh - Damascus
Direct Phone: [phone]
Fax: [phone]

Iran

ARIAN International Development
Co.
AEG Showroom
Shariati, Balatar as Safar
Teheran / Iran
Phone No. Showroom:
021 / 285 513 / 4
Phone No. Service:
021 / 312 27 67 / 8

Poland

Electrolux Poland Sp. zo.o.
ul. Domaniewska 41
02-034 Warszawa
tel.: [phone]
fax: [phone]

Russia

Electrolux Russia Ltd.
16 Olympiysky prospekt
129090 Moscow
Tel.: [phone]
Fax: [phone]

Saudi Arabia

Awad Badi Nahas Est
Shara Siteen
Jeddah 21463
Phone: [phone]
Alia Trading Co
Mecca Road
Riyadh 11491
Phone [phone]

Guarantee/Customer Service28

Japan

Electrolux Japan Ltd.
Domestic Appliances
Department
Maruzen Showa Warehouse
Building
Tookai 4-5-12, Ota-ku
143-006 Tokyo
Tel.: [phone]
Fax: [phone]

Thailand

Olympia Thai Tower, 444
Rachadapiser Road
Samsennok- Huaykwang
10320 Bangkok
Thailand
Tel.: [phone]
Fax: [phone]

Hungary

Electrolux Lehel KFT
Erzsébet Királyné útja 87.
1142 Budapest
Tel.: [phone]

Singapore

Group Pte Ltd.
833 Bukit Timah Road
Unit no. 01-11 Royalville
279887 Singapore
Tel.: [phone]
Fax: [phone]

Slovakia Rep.

Electrolux Slovakia S.R.O.
Seberiniho 1
821 03 Bratislava
Tel.: [phone], 4355
Fax: [phone]

Czech Rep.

ELECTROLUX DOMÁCå
SPOTØEBIÈE CZ
DIVIZE ELECTROLUX S.R.O.
Customer Centre
Hanusova ul.
140 21 Praha 4
Tel.: [phone]
Telefax: 2 6112 3504

Slovenia

Electrolux Slovenia D.O.O.
Traska Ul. 132
1000 Ljubljana
Tel.: [phone]
Fax: [phone]

South Africa

AEG (Pty) Ltd.
55, 12th Road
P.O. Box 1 02 64
Kew/Johannesburg 2000
Tel.: [phone]

29Guarantee/Customer Service

European Guarantee

This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for
the period specified in the appliance guarantee or otherwise by law. If you move from one of these coun­tries to another of the countries listed below the appliance guarantee will move with you subject to the fol­lowing qualifications:

•

The appliance guarantee starts from the date you first purchased the appliance which will be evidenced
by production of a valid purchase document issued by the seller of the appliance.

•

The appliance guarantee is for the same period and to the same extent for labour and parts as exists in
your new country of residence for this particular model or range of appliances.

•

The appliance guarantee is personal to the original purchaser of the appliance and cannot be transferred
to another user.

•

The appliance is installed and used in accordance with instructions issued by Electrolux and is only used
within the home, i.e. is not used for commercial purposes.

•

The appliance is installed in accordance with all relevant regulations in force within your new country of
residence.

The provisions of this European Guarantee do not affect any of the rights granted to you by law.

www.electrolux.com

p t b

Albania [phone] Rr. Pjeter Bogdani Nr. 7 Tirane
Belgique/België/

Belgien
Èeská republika [phone] Budìjovická 3, Praha 4, 140 21
Danmark [phone] Sjællandsgade 2, 7000 Fredericia
Deutschland [phone] Muggenhofer Str. 135, 90429 Nürnberg
Eesti [phone] Mustamäe tee 24, 10621 Tallinn

España [phone]

France www.electrolux.fr

Great Britain [phone]

Hellas [phone] Limnou Str., 54627 Thessaloniki
Hrvatska [phone] Slavonska avenija 3, 10000 Zagreb
Ireland [phone] Long Mile Road Dublin 12
Italia [phone] C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Latvija [phone] Kr. Barona iela 130/2, LV-1012, Riga
Lithuania [phone] Žirmūnų 67, LT-09001 Vilnius
Luxembourg [phone] Rue de Bitbourg, 7, L-1273 Hamm

Magyarország [phone]

Nederland [phone]

Norge [phone] Risløkkvn. 2 , 0508 Oslo

[phone] Bergensesteenweg 719, 1502 Lembeek

Carretera M-300, Km. 29,900
Alcalá de Henares Madrid

Addington Way, Luton, Bedfordshire
LU4 9QQ

H-1142 Budapest XIV,
Erzsébet királyné útja 87

Vennootsweg 1, 2404 CG ­Alphen aan den Rijn

Guarantee/Customer Service30

p t b

Österreich [phone] Herziggasse 9, 1230 Wien
Polska [phone] ul. Kolejowa 5/7, Warszawa

Portugal [phone]

Romania [phone] Str. Garii Progresului 2, S4, 040671 RO
Schweiz/Suisse/

Svizzera

Slovenija [phone]

Slovensko [phone]

Suomi www.electrolux.fi

Sverige [phone]

Türkiye [phone]

Россия [phone]

Óêðà¿íà [phone]

[phone] Industriestrasse 10, CH-5506 Mägenwil

Quinta da Fonte - Edificio Gonçalves Zarco

- Q 35
2774 - 518 Paço de Arcos

Electrolux Ljubljana d.o.o.
Gerbièeva 98, 1000 Ljubljana

Electrolux Slovakia s.r.o., Electrolux
Domáce spotrebièe SK, Seberíniho 1, 821
03 Bratislava

Electrolux Service, S:t Göransgatan 143,
S-105 45 Stockholm

Tarlabaþý caddesi no : 35 Taksim
Istanbul

129090 Москва, Олимпийский проспект, 16,
БЦ „Олимпик“

04074 Ки¿в, вул.Автозаводська,
2a, БЦ „Алкон“

Service

In the event of technical faults, please first check whether you can remedy the
problem yourself with the help of the operating instructions (section “What to
do if…”).

If you were not able to remedy the problem yourself, please contact the Cus­tomer Care Department or one of our service partners.

In order to be able to assist you quickly, we
require the following information:

– Model description
– Product number (PNC)
– Serial number (S No.)

(for numbers see rating plate)

– Type of fault
– Any error messages displayed by the ap-

pliance

– three digit letter-number combination for glass ceramic
So that you have the necessary reference numbers from your appliance at hand,

we recommend that you write them in here:

31Service

Model description: .....................................

PNC: .....................................

S No: .....................................

www.electrolux.com

867 202 528-A-201108-01 Subject to change without notice