X99384MD0
X99384MD01
EN COOKER HOOD
EN USER MANUAL .....................................................................................................................3
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not nd on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll nd everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect,
from specialist cookware to cutlery baskets, from bottle holders to delicate laundry
bags…
Visit the webshop at:
www.aeg.com/shop
ENVIRONMENT CONCERNS
english
3
Recycle the materials with the symbol Put the packaging in applicable
containersto recycle it.
Help protect the environment and human health and to recycle waste of
electricaland electronic appliances. Do not dispose appliances marked with the
symbol with the household waste. Return the product to your local recycling
facility orcontact your municipal ofce.
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available
The information can be found on the rating plate.
Model ___________________________
PNC ____________________________
Serial Number ____________________
4
RECOMMENDATIONS AND
SUGGESTIONS
• The Instructions for Use apply to several versions of this appliance. Accordingly, you may
nd descriptions of individual features that do
not apply to your specic appliance.
• The manufacturer will not be held liable for any
damages resulting from incorrect or improper
installation.
• The minimum safety distance between the
cooker top and the extractor hood is 650 mm
(some models can be installed at a lower
height, please refer to the paragraphs on
working dimensions and installation).
• Check that the mains voltage corresponds to
that indicated on the rating plate xed to the
inside of the hood.
• For Class I appliances, check that the
domestic power supply guarantees adequate
earthing.
• Connect the extractor to the exhaust ue
through a pipe of minimum diameter 120
mm. The route of the ue must be as short as
possible.
• Do not connect the extractor hood to exhaust
ducts carrying combustion fumes (boilers,
replaces, etc.).
• If the extractor is used in conjunction with
non-electrical appliances (e.g. gas burning
appliances), a sufcient degree of aeration
must be guaranteed in the room in order to
prevent the backow of exhaust gas. The
kitchen must have an opening communicating
directly with the open air in order to guarantee
the entry of clean air. When the cooker hood is
used in conjunction with appliances supplied
with energy other than electric, the negative
pressure in the room must not exceed 0,04
mbar to prevent fumes being drawn back into
the room by the cooker hood.
• If the supply cord is damaged, it must be
replaced from the manufacturer or its service
agent.
bottom of the pan only, making sure that it
does not engulf the sides.
• Deep fat fryers must be continuously monitored during use: overheated oil can burst into
ames.
• Do not ambè under the range hood; risk of
re.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• “ CAUTION: Accessible parts may become
hot when used with cooking ap-pliances”.
MAINTENANCE
• 1. Switch off or unplug the appliance from the
mains supply before carrying out any maintenance work.
• Clean and/or replace the Filters after the speci-
ed time period (Fire hazard).
- Activated charcoal lter W These lters are
not washable and cannot be regenerated,
and must be replaced approximately every
4 months of operation, or more frequently
with heavy usage.
W
- Grease lters Z The lters must be cleaned
every 2 months of operation, or more
frequently for particularly heavy usage, and
can be washed in a dishwasher.
USE
• The extractor hood has been designed exclusively for domestic use to eliminate kitchen
smells.
• Never use the hood for purposes other than
for which it has been designed.
• Never leave high naked ames under the
hood when it is in operation.
• Adjust the ame intensity to direct it onto the
Z
- Control lights, if present.
• Clean the hood using a damp cloth and a
neutral liquid detergent.
english
AB CD FE
5
CONTROLS
A: Hood Functions On/Off.
When the button is touched with the hood
turned off, all functions light up (intensity
50%) and are enabled.
When the button is touched with the hood
in operation, all functions are turned off and
disabled (Motor Off + Lights Off).
B: Manages motor speed:
0-V1-V2-V3-V4-P.
When the area is touched, the motor starts
at the speed required.
P = Intensive Speed, timed for 5 minutes,
after which the system returns to the
previous speed.
When activated from Motor Off it returns
to speed V1.When the required speed is
touched, it will become brighter (intensity
100%) than the other functions (intensity 50%).
C: Delay function.
Touching this button activates automatic
shutdown of the Motor, the Fans and the
Lighting with a 10 minute delay. It can only
be activated with the motor on, running at
any speed except Intensive, and with the
Sensor = Off.
Enables / Disables the Remote Control
Receiver.
When this button is pressed and held for
4 seconds (Motor Off + Lights Off, in the
absence of other alarms, the Led will light
up for:
4 seconds to indicate that the Remote
Control has been Activated
2 seconds to indicate that the Remote
Control has been Deactivated.
D: Sensor.
In this mode the Hood operates
automatically for a maximum of 5 hours,
after which it switches the Motor off. The
hood modies the speed of the motor
according to the ndings of the sensor.
Buttons B and C do not work. The function
is disabled by pressing the Button or turning
the hood off.
E: Manages Lighting Intensity:
0-L1-L2-L3-LMax.
When this area is touched, the Lights turn on
at the required intensity. When the lighting
intensity is touched, it will become brighter
(intensity 100%) than the other functions
(intensity 50%).
F: Filter ResetResets the Filter
Saturation alarm when the
button is touched with the motor
and lighting turned off.
After 100 hours operation the Led lights
up continuously to indicate saturation of
the Metal Grease Filters. After 200 hours
operation the Led ashes to indicate
saturation of the Activated Charcoal Filters.
Enables/Disables the Activated Charcoal
Filter Alarm.
When this button is pressed and held for
4 seconds(Motor Off + Lights Off), in the
absence of other alarms, the Led will light
up for:
4 seconds to indicate the Activated Charcoal
Filter Alarm has been activated
2 seconds to indicate the Activated Charcoal
Filter Alarm has been deactivated.
After connecting the hood to the mains, the
commands are activated after 4seconds.
When the Hood is switched off, none of the
functions is displayed, and only the normal
lettering on the control panel is visible.
All the rest will light up (intensity 50%) when
button A is touched.
The controls are activated by touching the
selected function, which will light up more
brightly (intensity 100%) with respect to
the other hood functions (intensity 50%).
When no commands are given for at least
10 seconds, only the selected functions will
be lighted (Intensity 100%) and all the rest
will turn off (Intensity 50%). After 7 hours in
operation, if no further commands are given
the hood will switch off (Motor Off + Lights
Off), from here you can touch for activated
the function, and the next touch you can
select the desired function.It is possible to
activate one of the hood functions (Speed
and Lighting) not just by touching the control
panel, but also by placing a nger on the
panel and sliding it towards the chosen
6
function without lifting it off. If the motor and
lights are turned off, by setting them to zero,
all the command LEDs will remain on at
50%, and if no further commands are given
in the next 10 seconds, then all the LEDs
will be turned off with the exception of the “0”
LEDs, which will remain on for a further 15
minutes.
HOOD OPTIONS IN SENSOR
MODE
When operating in Sensor mode, the type
of hob being used has an inuence. Two
options are available:
Electric hob;
Gas hob;
Initially it is set to electric hob. To change the
setting, proceed as follows:
• Turn the hood off using the hood on/off
button
• Press and hold the Sensor button for
8 seconds until the LED ashes as
described:
- 4 ashes indicate selection of the
electric hob;
- 2 ashes indicate selection of the gas
hob;
• Remove power for 10 seconds and then
reconnect it.
The calibration procedure is carried out
every time the type of hob is changed.
Calibration procedure: every time the
hood is turned on or the type of hob is
changed, the sensor calibration procedure
is run. During this time the hood must not be
used for cooking or subjected to particularly
intense smells, for example solvents or
detergents.
This process requires:
• 13 minutes if the electric hob has been
selected;
• 1 minute if the gas hob has been selected;
This phase is marked by ashing of the LED
on the sensor button, if it has been pressed.
Do not turn the motor on during calibration.
Warning: Do not spray directly on the grill
cleaning products but only clean with a
cloth soaked in detergent. Avoid cleaning
the grill alcohol or silicone products.
LIGHTING
Warning: This appliance is tted with a
white LED lamp classed as 1M according
to EN 60825-1: 1994 + A1:2002 + A2:2001
standards; maximum optical power emitted
@439nm: 7µW. Do not look directly at the
light through optical devices (binoculars,
magnifying glasses…).
• For replacement contact technical
support. (“To purchase contact technical
support”).
www.aeg.com/shop
436005782_02- 130121
Loading...