CONTENTSCONGRATULATIONS
WRG980CGS WRG970CS
Congratulations and thank you for choosing our
canopy rangehood. We are sure you will find your
new rangehood a pleasure to use. Before you use your
rangehood, we recommend that you read through the
whole user manual, which provides the description of
the rangehood and its function.
To avoid the risks that are always present when you use
an electrical appliance it is important that the canopy
rangehood is installed correctly and that you read the
safety instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners.
After unpacking the canopy rangehood please check it
is not damaged. If in doubt, do not use the appliance
but contact your local Electrolux Service Centre.
CONDITIONS OF USE
This appliance is intended to be used in household and
similar applications such as:
•Staffkitchenareasinshops,ofcesandother
working environments
•Farmhouses
•Byclientsinhotels,motelsandotherresidential
type environments
•Bedandbreakfasttypeenvironments.
Product description . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important safety instructions . . . . . . . . . . . . . . . . . . . . . 4
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using the rangehood . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintenance and cleaning . . . . . . . . . . . . . . . . . . . . . . 8
Changing halogen lamps . . . . . . . . . . . . . . . . . . . . . . . 8
Optional ducting accessories . . . . . . . . . . . . . . . . . . . . . 9
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1
2
3
4
5
6
7
Information on disposal for users
•Mostofthepackingmaterialsarerecyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
•Ifyouwishtodiscardthisproduct,pleasecontact
your local authorities and ask for the correct method
of disposal.
COMPONENT LIST
1. Exhaust cover ceiling mounting bracket
2. Telescopic exhaust cover set
3. Flexible exhaust pipe
4. Exhaust duct transition
5. Main body mounting brackets
6. Main body and fan housing assembly
7. Grease filters
8. Instruction book
ADDITIONAL ITEMS REQUIRED FOR INSTALLATION
•Fixings required to attach main body mounting
brackets and anti-tilt fixings.
•Fixingsrequiredtoattachexhaustcovermounting
brackets to the ceiling
TECHNICAL SPECIFICATIONS
Model: WRG970CS
Power supply: 220 – 240 volts 50Hz.
Motor: input power 200 watts
Lights: 2 x 20 watt 12 volt halogen
Model: WRG980CGS
Power supply: 220 – 240 volts 50Hz.
Motor: input power 200 watts
Lights: 2 x 20 watt 12 volt halogen
CONTENTS
WMAN_CAN_RH_Jun11.indd 2-3 24/06/11 2:48 PM
2 3
PRODUCT
DESCRIPTION
SAFETY
ELECTRICAL CONNECTION
RANGEHOOD INSTALLATIONELECTRICAL CONNECTION
This manual explains the proper use of your new canopy
rangehood. Please read this manual carefully before
using the product. This manual should be kept in a safe
place for handy reference.
This canopy rangehood is a domestic appliance which has
been manufactured and tested to comply with Australian
and New Zealand Standard AS/NZS 60335.2.31.
Meanings of symbols used in this manual are shown below:
THIS SYMBOL INDICATES THE POSSIBILITY
OF INJURY OR DAMAGE TO PROPERTY
THIS SYMBOL INDICATES NEVER TO DO THIS
THIS SYMBOL INDICATES ALWAYS DO THIS
READ THE FOLLOWING CAREFULLY TO AVOID
AN ELECTRIC SHOCK OR FIRE.
Young children should be supervised to ensure they
do not play with the canopy rangehood.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance
by a person responsible for their safety.
Ensure the canopy rangehood is switched off before
carrying out maintenance, to avoid any possibility of
electric shock.
Never carry out flambé cooking under the
canopy rangehood.
This canopy rangehood is not recommended
for barbeques.
This canopy rangehood cannot be installed for
external use.
Grease filters must be removed at least every four
weeks for cleaning to reduce the risk of fire.
The exhaust from the canopy rangehood must not be
discharged into any heating flue, which may carry
combustion products from other sources. (Fig. 1)
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
There must be adequate ventilation of the room when
the canopy rangehood is used at the same time as
appliances burning gas or other fuels.
Always cover lit gas burners with pots or pans when
canopy rangehood is in use.
Always switch off gas burners before you remove pots
or pans.
Do not leave lit gas burners exposed due to the risk
of fire. (Fig. 2)
• Checkthatthemainsvoltagematcheswiththevoltage
on the data plate inside the canopy rangehood.
• Checkthattheinstallationcomplieswithstandards
of local gas and electricity authorities.
• Ifthesupplycordisdamaged,itmustbereplaced
by the manufacturer, its service agent or similarly
qualified person in order to avoid a hazard.
CANOPY DIMENSIONS
WRG970CS
WRG980CGS
NOTE: The fan housing exhaust outlet is 163mm in diameter.
Use duct transition or flexible pipe supplied with the canopy
rangehood as a reducer if using 150mm optional ducting
accessories. (See page 9 for optional ducting accessories).
FIG. 1 FIG. 2
Check that the installation complies with standards
of local building, gas and electrical authorities.
Before connecting to the mains supply ensure that the
mains voltage corresponds to the voltage on the rating
plate inside the cooker hood.
SAFETY WARNINGS – FOR THE INSTALLER
When installing the cooker hood, make sure you adhere
to the minimum and maximum distances from the cooker
hood base to the hob surface (as per table on right hand
side) and as required by Australian Standards.
EXHAUST DUCT INSTALLATION
The following rules must be strictly followed to obtain
optimal air extraction.
• Keepexhaustductshortandstraight
• Donotreducethesizeorrestrictexhaustduct.
• Keepbendsintheexhaustducttoaminimum.
• Whenusingexibleductalwaysinstallductwith
helix pulled taut to minimise pressure loss.
• Failuretoobservethesebasicinstructionswill
drastically reduce the performance and increase
the noise levels of the cooker hood.
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for that purpose.
The exhaust from the cooker hood must not be
discharged into any heating flue, which may carry
combustion products from other sources
NOTE: Some installations may require the telescopic exhaust
cover to be cut to length. Cut with sharp tin snips or a
fine-tooth hack saw blade, taking care not to distort or dent
the exhaust cover.
WRG970CS
WRG980CGS
4 5
WMAN_CAN_RH_Jun11.indd 5 24/06/11 2:48 PM
INSTALLATIONSAFETY