AEG WAL6E200, WAL7E200, WAL4E200 User Manual [da]

WAL4E200 WAL6E200 WAL7E200

................................................ .............................................

EN WASHING MACHINE USER MANUAL 2 DE WASCHMASCHINE BENUTZERINFORMATION 25

2 electrolux

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety information 2 Safety instructions 3 Technical information 4 Product description 5 Control panel 6 Programmes 9 Consumption values 11

Before first use 11 Using the appliance 12 Hints and tips 14 Care and cleaning 15 Troubleshooting 18 Installation 20 Environment concerns 24

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.

CHILDREN AND VULNERABLE PEOPLE SAFETY

Warning! Risk of suffocation, injury or permanent disability.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door when it is open.

• If the appliance has a child safety device, we recommend you activate it.

• Cleaning and user maintenance shall not be made by children without supervision.

electrolux 3

GENERAL SAFETY

• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.

• Do not change the specification of this appliance.

• Obey the maximum load volume of 7 kg (refer to the “Programme chart” chapter).

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa)

• The ventilation openings in the base (if applicable) must not be obstructed by a carpet.

• The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.

SAFETY INSTRUCTIONS

INSTALLATION

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts. When you move

the appliance again you must block the drum.

• Do not install or use a damaged appli-

ance.

•Do not install or use the appliance where

the temperature is less than 0 °C or where it is exposed to the weather.

• Obey the installation instruction supplied

with the appliance.

• Make sure that the floor where you install

the appliance is flat, stable, heat resistant and clean.

• Do not install the appliance where the ap-

pliance door can not be fully opened.

• Always be careful when you move the

appliance because it is heavy. Always wear safety gloves.

• Make sure that there is air circulation be-

tween the appliance and the floor.

• Adjust the feet to have the necessary space between the appliance and the carpet.

Electrical connection

Warning! Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.

• Always use a correctly installed shockproof socket.

• Do not use multi-plug adapters and extension cables.

• Make sure not to cause damage to the mains plug and to the mains cable. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Centre.

• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.

4 electrolux

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

• Do not touch the mains cable or the mains plug with wet hands.

• This appliance complies with the E.E.C. Directives.

Water connection

• Make sure not to cause damage to the water hoses.

• The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.

• Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean.

• The first time you use the appliance, make sure that there is no leakage.

USE

Warning! Risk of injury, electrical

shock, fire, burns or damage to the appliance.

• Use this appliance in a household environment.

• Do not change the specification of this appliance.

• Obey the safety instructions on the detergent packaging.

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

• Do not touch the glass of the door while a programme operates. The glass can be hot.

• Make sure that you remove all metal objects from the laundry.

• Do not put a container to collect possible water leakage under the appliance. Contact the Service to ensure which accessories can be used.

CARE AND CLEANING

Warning! Risk of injury or damage to

the appliance.

• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.

• Do not use water spray and steam to clean the appliance.

• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

DISPOSAL

Warning! Risk of injury or suffocation.

• Disconnect the appliance from the mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent chil-

dren and pets to get closed in the appliance.

TECHNICAL INFORMATION

Dimensions Width / Height / Depth 600 / 850 / 605 mm

Total depth 640 mm

Electrical connection: Voltage

Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture

Water supply pressure Minimum 0,5 bar (0,05 MPa)

Water supply Maximum load Cotton 7 kg

Overall power Fuse Frequency

Maximum 8 bar (0,8 MPa) Cold water

230 V

2200 W

10 A

50 Hz

IPX4

electrolux 5

Spin speed Maximum 1200 rpm (WAL4E200)

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

1400 rpm (WAL6E200) 1600 rpm (WAL7E200)

PRODUCT DESCRIPTION

1 2 3 8

Worktop

Detergent dispenser

Control panel

Door handle

Rating plate

Drain pump

Feet for the appliance level

Water drain hose

Water inlet valve

Mains cable

Transit bolts

Feet for the appliance level

ACCESSORIES

1 2

Spanner

To remove the transit bolts.

Plastic caps

To close the holes on the rear side of the cabinet after the removal of the transit bolts.

Anti-flood inlet hose

To prevent possible leakage

Plastic hose guide

To connect the drain hose on the edge of a sink.

CHILD SAFETY DEVICE

• When you activate this device, you cannot close the door. This prevents children

6 electrolux

or pets to be closed in the drum. To activate the device, turn it clockwise, until the groove is horizontal. To deactivate the device, turn it counterclockwise, until the groove is vertical.

CONTROL PANEL

1 2 3

Baumwolle Eco

Coton Eco

45678910

On/Off button (Ein/Aus — Marche/

Arrêt) Programme knob

Display

Start Pause button (Start/Pause —

Départ/Pause) Delay start button (Zeitvorwahl — Dé-

part Différé) Time saving button (Zeit Sparen —

Gain de Temps) Extra rinse button (Extra Spülen —

Rinçage+) Stain button (Flecken — Taches)

Spin reduction button (U./Min. — T/

min.) Temperature button (Temp.)

ON OFF BUTTON

Press this button to activate or deactivate the appliance. A tune sounds when the appliance is activated.

The AUTO Stand-by function automatically deactivates the appliance to decrease the energy consumption when:

• You do not use the appliance for 5 mi-

nutes before you press button

. – All settings are cancelled. –

Press button

to activate the appli-

ance again.

– Set again the washing programme and

all possible options.

• After 5 minutes from the end of the washing programme. Refer to 'At the end of programme'.

PROGRAMME KNOB

Turn this knob to set a programme. The related programme indicator comes on.

electrolux 7

DISPLAY

A B C D

The display shows:

A • The maximum temperature of the programme. B

• The default spin speed of the programme.

•

'No Spin'

C •

The display symbols.

Symbols Description

and 'Rinse Hold' symbols.

Washing phase

Rinse phases

Spin phase

Child lock

You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off.

If the programme is completed but the symbol stays on:

• There is water in the drum.

• The 'Rinse Hold' function is on. Delay start

D • The programme time

1) Only available for Spin/Drain programme.

2) The symbols appear on the display when the related phase or function is set.

START/PAUSE BUTTON

Press button gramme.

When the programme starts, the time decreases with steps of 1 minute.

•The delay start When you press the delay start button, the display shows the delay start time.

•Alarm codes If the appliance has a malfunction, the display shows alarm codes. Refer to 'Troubleshooting' chapter.

•Err The display shows this message for some seconds if: – You set a function that is not applicable for the programme. – You change the programme while it operates.

The indicator of the Start/Pause button

• When the programme is completed.

to start or interrupt a pro-

flashes.

DELAY START BUTTON

Press button gramme from 30 minutes to 20 hours.

to delay the start of a pro-

8 electrolux

TIME SAVE BUTTON

Press the button

to decrease the pro-

gramme duration.

• Press one time to set 'Shortened duration' for items with daily soil.

• Press two times to set 'Extra Quick' for items with almost no soil.

Some programmes accept only one of the two functions.

EXTRA RINSE BUTTON

Press button

to add rinsing phases to a

programme. Use this function for persons allergic to detergents and in areas where the water is soft.

STAIN BUTTON

Press button

to add the stain phase to a programme. Use this function for laundry with hard stains to remove. When you set this function, put the stain re-

mover into compartment

This function increases the programme duration. This function is not available with a temperature lower than 40° C.

SPIN BUTTON

Press this button to:

• Decrease the maximum speed of the

spin phase when you set a programme.

The display shows only the spin speeds available with the set programme.

• Deactivate the spin phase.

• Activate the 'Rinse Hold' function. Set

this function to prevent fabric creases. The appliance does not drain the water when the programme is completed.

Spin phase is off.

'Rinse Hold' function is on.

- -

= cold water

ACOUSTIC SIGNALS FUNCTION

You can hear the acoustic signals when:

• You activate the appliance.

• You deactivate the appliance.

• You press the buttons.

• The programme is completed.

• The appliance has a malfunction. To deactivate/activate the acoustic sig-

nals, press button

and button 7 at the

same time for 6 seconds.

If you deactivate the acoustic signals, they continue operate only when you press the buttons and when a malfunction occurs.

CHILD LOCK FUNCTION

This function prevents children to play with the control panel.

•

To activate the function, press button

and button 9 at the same time until the display shows the symbol

• To deactivate the function, press button

and button 9 at the same time until

the symbol

goes off.

You can activate the function:

• Before you press the Start/Pause button

: the appliance cannot start.

• After you press the Start/Pause button

, all the buttons and the programme

knob are deactivated.

PERMANENT EXTRA RINSE FUNCTION

With this function you can keep the extra rinse function permanently on when you set a new programme.

•

To activate the function press button

and button 5 at the same time until the indicator of button

is on.

• To deactivate the function press button

and button 5 at the same time until

the indicator of button

is off.

TEMPERATURE BUTTON

Press button

to change the default temperature.

PROGRAMMES

Programme

Temperature

Koch/Bunt Blanc/Couleurs

Cottons 95° - Cold

Koch/Bunt + Voorwäsche Coton + Prélavage

Cottons + Prewash 95° - Cold

Extra Leise Extra Silence

Extra Silent 95° - Cold

Pflegeleicht Synthétiques

Synthetics 60° - Cold

Pflegeleicht + Voorwäsche Synthetiques + Prélavage

Synthetics + Prewash 60° - Cold

Leichtbügeln Repassage Fac-

ile

Easy Iron 60° - Cold

Feinwäsche Délicats

Delicates 40° - Cold

Wolle/Seide Laine/Soie

Wool/Silk 40° - Cold

Schleudern/ Pumpen Essorage/Vi-

dange

Spin/Drain

Type of load

max. weight of load

White and coloured cotton with normal soil. max. 7 kg

White and coloured cotton with heavy soil. max. 7 kg

White and coloured cotton with normal soil. max. 7 kg

Synthetic or mixed fabric items with normal level of soil. max. 3.5 kg

Synthetic or mixed fabric items with heavy soil. max. 3.5 kg

Synthetic fabric items with normal soil. max. 3.5 kg

Delicate fabrics as acrylics, viscose, polyester items with normal soil. max. 3 kg

Machine washable wool. Hand washable wool and delicate fabrics with «hand washing» care symbol. max. 2 kg

All fabrics The maximum load of the laundry is related to the type of laundry.

Cycle

description

Wash Rinses Long spin

Prewash Wash Rinses Long spin

Stop with water in the drum Rinses Long spin

Wash Rinses Short spin

Prewash Wash Rinses Short spin

Wash Rinses Short spin

Drainage of the water Spin phase at the maximum speed.

electrolux 9

Functions

SPIN REDUCTION RINSE HOLD

STAIN EXTRA RINSE

TIME SAVING

SPIN REDUCTION RINSE HOLD

STAIN EXTRA RINSE

TIME SAVING

STAIN EXTRA RINSE

TIME SAVING

SPIN REDUCTION RINSE HOLD

STAIN EXTRA RINSE

TIME SAVING

SPIN REDUCTION RINSE HOLD

STAIN EXTRA RINSE

TIME SAVING

RINSE HOLD EXTRA RINSE TIME SAVING

SPIN REDUCTION RINSE HOLD

STAIN EXTRA RINSE

TIME SAVING

SPIN REDUCTION RINSE HOLD

SPIN REDUCTION NO SPIN

10 electrolux

Programme

Temperature

Spülen Rinçage

Rinse

Gardinen Rideaux

Curtains 40° - Cold

Type of load

max. weight of load

Cycle

description

Hand washed items. One rinse with additive

Long spin

Set this programme to wash curtains. It adds automatically the prewash phase to clean the

Prewash Wash Rinses Short spin

Functions

SPIN REDUCTION RINSE HOLD

EXTRA RINSE

SPIN REDUCTION RINSE HOLD EXTRA RINSE

dust from the curtains. Do not put the detergent into the prewash compartment. max. 2 kg

Jeans

60° - Cold

Schnell Intensiv Intensif

Quick intensive 60°-40°

All items in jeans. Jersey made items with hi-tech materials. max. 7 kg

Quick washing programme, to be used for lightly soiled white/fast coloured cottons and

Wash Rinses Short spin

Wash Rinses Long spin

SPIN REDUCTION RINSE HOLD EXTRA RINSE

TIME SAVING

SPIN REDUCTION RINSE HOLD EXTRA RINSE

mixed fabrics. max. 5 kg

20 Min. - 3 kg

40°-30°

Cotton and synthetic items with light soil or worn only one time.

Wash Rinses Short spin

SPIN REDUCTION

max. 3 kg

Super Eco

Cold

Baumwolle Eco Coton Eco

Cottons Eco 60° - 40°

1) The Stain function is not available with a temperature lower than 40°C

2) if you set the Extra Quick function we recommend to decrease the quantity of the load. It is possible to keep the

full load but the washing results are not good.

3) The wash and spin phase is soft to prevent the creases of the laundry. The appliance adds some rinses.

4) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with

the laundry. To select the DRAIN programme only, set the function NO SPIN.

5) Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs delicate rinses and a

short spin

6) Set this programme to decrease the time and the consumption of energy and water.

7) STANDARD PROGRAMMES for the Energy Label consumption values. According to regulation 1061/2010,

these programmes are respectively the «standard 60° C cotton programme» and the «standard 40° C cotton programme». They are the most efficient programmes in terms of combined energy and water consumption for washing normally soiled cotton laundry. Set this programme to have a good washing results and decrease the energy consumption. The time of the washing programme is extended.

The water temperature of the washing phase may differ from the temperature declared for the selected programme.

Mixed fabrics (cotton and synthetic items). max. 3 kg

White and fast coloured cotton with normal soil. max. 7 kg

Wash Rinses Long spin

SPIN REDUCTION RINSE HOLD EXTRA RINSE

SPIN REDUCTION RINSE HOLD STAIN EXTRA RINSE TIME SAVING

electrolux 11

CONSUMPTION VALUES

At programme start the display shows the duration programme for the maximum load capacity. During the washing phase the programme duration is automatically calculated and can greatly be reduced if the laundry load is lower than the maximum load capacity (e.g. Cotton 60°C, maximum load capacity 7 kg, the programme duration exceeds 2 hours; real load 1 kg, the programme duration don’t reach 1 hour). When the appliance is calculating the real programme duration a dot blinks in the display.

The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature.

Programmes Load

Cottons 60 °C 7 1.1 60 180 53 52 43 Cottons 40 °C 7 0.9 60 160 53 52 43 Synthetics 40

°C Delicates 40 °C 3 0.5 65 80 35 35 35 Wool/Hand

wash 30 °C Standard cotton programmes Standard 60

°C cotton Standard 60

°C cotton Standard 40

°C cotton

1) At the end of spin phase.

The information given in the charts above are in compliance with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC.

(kg)

3.5 0.7 50 100 35 35 35

2 0.4 55 60 30 30 30

7 1.05 49 207 53 52 43

3.5 0.69 39 155 53 52 43

3.5 0.46 39 150 53 52 43

Off Mode (W) Left-On Mode (W)

Energy consumption (kWh)

0.48 0.48

Water

con-

sumption

(litre)

Approxi-

mate

programme duration

(mi-

nutes)

Re-

maining

mois-

ture

(%)

WAL4E

200

Remain-

ing

mois-

ture

(%)

WAL6E2

Remain-

mois-

ture

(%)

WAL7E2

ing

BEFORE FIRST USE

1. To activate the drain system, put 2 litre of water in the main wash compartment of the detergent dispenser.

2. Put a small quantity of detergent in the main wash compartment of the detergent dispenser. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub.

12 electrolux

USING THE APPLIANCE

1. Open the water tap.

2. Connect the mains plug to the mains socket.

Press button ance.

4. Put the laundry in the appliance.

5. Use the correct quantity of detergent and additives.

6. Set and start the correct programme for the type of laundry and soil.

LOADING THE LAUNDRY

1. Open the appliance door.

2. Put the laundry in the drum, one item at a time. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum.

3. Close the door.

USING THE DETERGENT AND ADDITIVES

to activate the appli-

Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry.

The detergent compartment for the prewash phase and the soak programme. Add the detergent for prewash and soak before the start of the programme.

The detergent compartment for the washing phase. If you use a liquid detergent, put it immediately before you start the programme.

Liquid additives compartment (fabric conditioner, starch). Put the product in the compartment before you start the programme.

This is the maximum level for the quantity of liquid additives.

The compartment for the stain remover. Put the product in the compartment and set the stain function before you start the programme.

Flap for powder or liquid detergent Turn it (up or down) in the correct position to use powder or liquid detergent.

Always obey the instructions that you find on the packaging of the detergent products.

electrolux 13

Check the position of the flap

1. Pull out the detergent dispenser until it stops.

2. Press the lever down to remove the dispenser.

3. To use powder detergent, turn the flap up.

4. To use liquid detergent, turn the flap down.

– Do not set the prewash phase. – Do not set the delay start function.

SETTING AND STARTING A PROGRAMME

1. Turn the programme knob. The related programme indicator comes on.

The indicator of button

flashes with

red colour.

3. The display shows the default temperature and spin speed. To change the temperature and/or the spin speed, press the related buttons.

4. Set the available functions. The indicator of the set function comes on or the display shows the related symbol.

Press button gramme. The indicator of button

to start the pro-

on.

The drain pump can operate for a short time when the appliance fills water.

INTERRUPT A PROGRAMME

Press button

. The indicator flashes.

again. The washing

programme continues.

CANCEL A PROGRAMME

Press button

to cancel the programme and to deactivate the appliance.

Press button

again to activate the appliance. Now, you can set a new washing programme.

The appliance does not drain the water.

5. Measure out the detergent and the fabric conditioner.

6. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer.

With the flap in the position DOWN:

– Do not use gelatinous or thick liquid

detergents.

– Do not put more liquid detergent

than the limit showed in the flap.

CHANGE A FUNCTION

You can change only some functions before they operate.

Press button

. The indicator flashes.

2. Change the function set.

SET THE DELAY START

Press button

again and again until the display shows the number of minutes or hours. The related symbols comes on.

14 electrolux

Press button

, the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically.

Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the

Steam programme.

CANCEL THE DELAY START

Press button

. The related indicator flashes.

Press button

again and again until the display shows 0’.

Press button

. The programme starts.

OPEN THE DOOR

While a programme or the delay start operates, the appliance door is locked.

To open the appliance door:

Press button

. The door lock symbol in the display goes off.

2. Open the appliance door.

3. Close the appliance door and press

button

. The programme or the de-

lay start continues.

If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow:

1. Deactivate the appliance.

2. Wait for some minutes.

3. Make sure that no water is in the drum.

Important! If you deactivate the appliance, it is necessary to set the programme again.

AT THE END OF THE PROGRAMME

• The appliance stops automatically.

• The acoustic signals operate.

•

In the display

comes on.

• The indicator of the Start/Pause button

goes off.

• The door lock symbol goes off.

•

Press button

to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance.

When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle.

• Remove the laundry from the appliance. Make sure that the drum is empty.

• Keep the door ajar, to prevent mildew and odours.

• Close the water tap.

The washing programme is completed, but there is water in the drum:

– The drum turns regularly to prevent the

creases in the laundry.

– The door stays locked. – You must drain the water to open the

door.

To drain the water:

1. If necessary, decrease the spin speed.

Press the Start/Pause button

. The

appliance drain the water and spin.

3. When the programme is completed

and the door lock symbol goes off, you can open the door

4. Deactivate the appliance.

The appliance drain and spin automatically after approximately 18 hours.

HINTS AND TIPS

THE LAUNDRY LOAD

• Divide the laundry in: white, coloured, synthetics, delicates and wool.

• Obey the washing instructions that are on the laundry care labels.

• Do not wash together white and coloured items.

• Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first times.

• Button up pillowcases, close zippers, hooks and poppers. Tie up belts.

• Empty the pockets and unfold the items.

• Turn inside out multilayered fabrics, wool and items with painted illustrations.

• Remove hard stains.

electrolux 15

• Wash with a special detergent heavy soil stains.

• Be careful with the curtains. Remove the hooks or put the curtains in a washing bag or pillowcase.

•Do not wash in the appliance : – Laundry without hems or with cuts – Underwired bras. – Use a washing bag to wash small

items.

• A very small load can cause balance problems with the spin phase. If this occurs, adjust manually the items in the tub and start the spin phase again.

STUBBORN STAINS

For some stains, water and detergent is not sufficient. We recommend that you remove these stains before you put the items in the appliance. Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric.

DETERGENTS AND ADDITIVES

• Only use detergents and additives specially made for washing machines.

• Obey the instructions that you find on the on packaging of these products.

• Use the correct products for the type and colour of the fabric, the programme temperature and the level of soil.

• If you use liquid detergents, do not set the prewash phase.

• If your appliance has not the detergent dispenser with the flap device, add the liquid detergents with a dosing ball.

WATER HARDNESS

If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener. To know the water hardness in your area, contact your local water authority. Obey the instructions that you find on the packaging of the products. Equivalent scales measure the water hardness:

• German degrees (°dH).

• French degrees (°TH).

• mmol/l (millimol for each litre - international unit for the hardness of water).

• Clarke degrees.

• Do not mix different types of detergents.

• To help the environment, do not use more than the correct quantity of detergent.

Water hardness table

Level Type

1 soft 0-7 0-15 0-1.5 0-9 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25

°dH °T.H. mmol/l Clarke

Water hardness

CARE AND CLEANING

Warning!

Disconnect the appliance from the mains supply before you clean it.

DESCALING

The water we use contains limescale. If it becomes necessary, use a water softener to remove limescales.

Use a special product made for washing machines. Obey the instructions that you find on the packaging of the manufacturer. Do this separately from the laundry wash.

EXTERNAL CLEANING

Clean the appliance only with soap and warm water. Fully dry all the surfaces.

16 electrolux

Caution! Do not use alcohol, solvents

or chemical products.

MAINTENANCE WASH

With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a maintenance wash. To do this:

• Empty the laundry from the drum.

• Set the hottest cotton wash programme

• Use a correct quantity of powder detergent with biological properties.

After each wash, keep the door open for a while to prevent mould and to let unpleasant smells go out.

DOOR SEAL

Regularly examine the seal and remove all objects from the inner part.

DRUM

Regularly examine the drum to prevent limescale and rust particles. Only use special products to remove rust particles from the drum. To do this:

• Clean the drum with special product for stainless steel.

• Start a short programme for cotton at the maximum temperature with a small quantity of detergent.

DETERGENT DISPENSER

1. Press the lever.

2. Pull the dispenser out.

3. Remove the top part of the liquid additive compartment.

4. Clean all the parts with water.

5. Clean the dispenser recess with a brush.

6. Put back the dispenser in the recess.

DRAIN PUMP

Regularly examine the drain pump and make sure that it is clean.

Clean the pump if:

• The appliance does not drain the water.

• The drum cannot turn.

• The appliance makes an unusual noise

because of the blockage of the drain pump.

• The display shows an alarm code be-

cause of the problem with water drain.

Warning!

• Disconnect the mains plug from the mains socket.

• Do not remove the filter while the appliance operates. Do not clean the drain pump if the water in the appliance is hot. The water must be cold before you clean the drain pump.

+ 36 hidden pages