AEG L84950A3 User Manual

LAVAMAT 84950 A3

User manual

Washing machine

2 Contents

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

CONTENTS

OPERATING INSTRUCTIONS	3
SAFETY INFORMATION	3
General safety	3
Installation	4
Use	4
Child Safety	5
PRODUCT DESCRIPTION	5
Detergent dispenser drawer	7
CONTROL PANEL	7
DISPLAY	8
The display shows the following
information:	9
Duration of the selected programme	9
Programme progress display	9
Delay start	9
Incorrect option selection	9
Alarm codes	9
End of the programme	9
FIRST USE	9
Setting the language	9
Setting the time	10
PERSONALIZATION	10
Setting the brightness	10
Setting the contrast	10
Setting the acoustic signal	10
Return to main menu	11
DAILY USE	11
Open the door	11
Select the required programme by means
of selector dial (1)	11
Weight sensor	11
Load the laundry	12
Measure out the detergent and the fabric
softener	12
Select the temperature (button 2)	13

Select the spin speed, Night Cycle or Rinse

Hold option (button 3)	13
Programme options (button 4)	14
PREWASH option	14
STAIN option	14
SENSITIVE option	14
Select the EXTRA RINSE option	15
Select the SAVE MEMORY option	15
Select the Child Lock option	15
Select the TIME SAVING option (button 6)
	16
Select the START/PAUSE (button 7)	16
Select the DELAY START (button 8)	16
Altering an option or a running programme
	16
Interrupting a programme	17
Cancelling a programme	17
Opening the door after the programme has
started	17
At the end of the programme	17
WASHING PROGRAMMES	18
HELPFUL HINTS AND TIPS	21
Sorting out the laundry	21
Before loading the laundry	22
Removing stains	22
Detergents and additives	22
Quantity of detergent to be used	23
Degrees of water hardness	23
CARE AND CLEANING	23
Descaling	23
After each wash	23
Maintenance wash	23
External cleaning	24
Detergent dispenser drawer	24
Washing drum	24
Door seal	25
Drain pump	25

Safety information	3

Cleaning the water inlet filters	27
Frost precautions	28
Emergency emptying out	28
WHAT TO DO IF…	28
TECHNICAL DATA	32
CONSUMPTION VALUES	32
INSTALLATION INSTRUCTIONS	33
INSTALLATION	33

Unpacking	33
Positioning and levelling	35
Water inlet	35
Water-stop device	37
Water drainage	37
ELECTRICAL CONNECTION	38
ENVIRONMENT CONCERNS	38
Packaging materials	39
Ecological hints	39

Subject to change without notice

OPERATING INSTRUCTIONS

SAFETY INFORMATION

Read carefully & keep for future reference.

•The safety of Your appliance complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.

•It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.

•You MUST read them carefully before installing or using the appliance.

•Before first starting up, check the appliance for any damage incurred during transport. Never connect up a damaged appliance . If parts are damaged, contact your supplier.

•If the appliance is delivered in the winter months when there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.

General safety

		•	It is dangerous to alter the specifications or attempt to modify this product in any way.
		•	During high temperature wash programmes the door glass may get hot. Do not touch
			it!
		•	Make sure that small pets do not climb into the drum. To avoid this, please check into
			the drum before using.
	372010	•	Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp
			material can cause extensive damage and must not be placed into the machine.
		•	Only use the advised quantities of fabric softener and detergent. Damage to the fabric
	-A-		can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.
		•	Wash small items such as socks, laces, washable belts etc in a washing bag or pillow
	132940000
			torn material.
			case as it is possible for such items to slip down between the tub and the inner drum.
		•	Do not use your appliance to wash articles with whalebones, material without hems or

4Safety information

•Always unplug the appliance and turn off the water supply after use, cleaning and maintenance.

•This appliance is provided with a white drum light. It is class 1, in accordance with IEC 60825-1:1993 + A1:1997 + A2:2001 standard. Should the appliance drum light need to be replaced, this must be carried out by a Service Centre.

•Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.

Installation

•This appliance is heavy. Care should be taken when moving it.

•When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.

•All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.

•After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall.

•If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance.

•Always be sure, that there is no water leakage from hoses and their connections after the installation.

•If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter.

•Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

•Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Use

•This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.

•Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label.

•Do not overload the appliance. See the Washing Programme Table.

•Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

•Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

•Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.

•Never use the appliance if the power supply cable, the control panel, the working surface or the base are damaged so that the inside of the washing machine is accessible.

Product description	5

Child Safety

•This appliance is not intended for use by person (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children's reach.

•Keep all detergents in a safe place out of children’s reach.

•Make sure that children or pets do not climb into the drum. To prevent children or

pets becoming trapped inside the drum the machine incorporates a special feature. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anticlockwise until the groove is vertical.

PRODUCT DESCRIPTION

Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

The New JET SYSTEM allows total use of detergent and reduces water consumption so saving energy.

6 Product description

1Detergent dispenser drawer

2Control panel

3Drum light

4Door opening handle

5Rating plate

6Drain pump

7Adjustable feet

Control panel	7
Detergent dispenser drawer
Compartment for detergent used for pre-
wash . The prewash detergent is added at the be-
ginning of the wash programme.
Compartment for powder or liquid detergent
used for main wash .
Compartment for liquid additives (fabric soft-
ener, starch).
Compartment for stain remover used for
main wash with STAIN-option .

CONTROL PANEL

Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and the display. These are presented by relevant numbers on the following pages.

1

7

8

1Programme selector dial

2TEMPERATURE button

3SPIN reduction button

4OPTION button

5OK button

6TIME SAVING button

8 Display

7 START/PAUSE button

8 DELAY START button

9 Display

Table of Symbols

	Cottons/Lin-	Hygiene	Jeans
	en
	Synthetics	Easy Iron	Delicates
	Blanket	Delicate Rinses	Drain
	Spin	Wool	Hand Wash
	Lingerie	Outdoor Sports	20 MIN. 3 KG
	Quick Inten-	Temperature	Spin Reduction
	sive
	Options	Time Saving	Start/Pause
	Delay Start

DISPLAY

9

9

9

9.1- This position shows the water temperature of the washing cycle

9.2- This position shows the selected spin speed and the following options symbols: NIGHT CYCLE , RINSE HOLD

9.3- CHILD SAFETY LOCK symbol

9.4- TIME SAVING options: (DAILY), (SUPER QUICK)

9.5- The symbol of the delayed start (DELAY START)

9.6- Option symbols: PREWASH , STAIN , SENSITIVE , EXTRA RINSE

9.7- End of the programme

9.8- Washing programme duration or delayed start countdown

9.9- Information field (several rows show you the programme progress)

First use	9

The display shows the following information: Duration of the selected programme

After selecting a programme, the duration of the washing programme 9.8 and the estimated end of cycle 9.7 are displayed in hours and minutes (for example 1.40).

The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.

After the programme has started, the time remaining is updated every minute.

Programme progress display

After having pressed the button 7 , the display shows the running phase of the washing program 9.9 . On the display you can see also the description of the selected type of fabric, an animated bar, that indicates the carried out cycle and the remaining one, the duration of the washing program and the end of cycle.

Delay start

If you have selected the button 8 , the relevant symbol 9.5 appears on the display.

After having pressed the button 7 , the selected delay time value (max 20 hours) appears on the right side of the display with the corrisponding symbol.

The delay time value decreases every minute ( 9.8 ).

Incorrect option selection

If a wrong option is selected the display says that it is not selectable.

Alarm codes

In the event of operating problems, some alarm messages can be displayed, for example: «Cannot fill water. Please check that the tap is open and then press STAR/PAUSE» (see chapter «What to do if...»).

End of the programme

When the programme has finished the corresponding message appears on the display. The button 7 pilot light goes off.

FIRST USE

• Ensure that the electrical and water connections comply with the installation instructions.

•Remove the polystyrene block and any material from the drum.

•Before the first wash, run a cotton cycle at the highest temperature without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and start the machine.

Setting the language

When switching on the appliance for the first time, by turning the programme selector dial 1 , you must set the language that you prefer. When the appliance is switched on again all the messagges in the display will appear in this language.

10 Personalization

If the display is not showing any language screen, the appliance has already been switched on once. In such case, if you would change the language setting, press at the same time the buttons 2 and 3 for 6 seconds to activate the menu language.

By pressing the button 4 you can scroll all the available languages.

The display says to press the button 5 to confirm the language and then the button 4 to change the selection.

Press the button 5 twice to confirm your choice.

Setting the time

After the desired language you must set the time before the first wash. Remember to change the setting time in accordance with daylight-savings time or solar time.

The CLOCK setting permits you to modify/set up the current time. It is important to keep it updated as the current END Cycle Time depends on it.

To set the time press repeatedly the button 4 to select the settings menu ( SETTINGS ) and confirm your choice by pressing button 5 .

With a single and short pressing of the button 4 , the hours can be adjusted.

Press the button 5 to confirm it. Repeat the previous operation for setting the minutes.

If the appliance has already been switched on once, refer to the beginning of «Personalization» chapter.

PERSONALIZATION

This appliance is provided with a SETTINGS menu that allows you to modify the factory settings as you want.

When you switch on the machine, by turning the programme selector dial, press the button 4 to activate the OPTIONS menu. By pressing again the same button you can move through all the available options till when you locate the SETTINGS menu. Press the button 5 to access in the menu. Use the button 4 again to scroll all the settings and press button 5 to confirm your choice.

Setting the brightness

The BRIGHTNESS setting allows you to modify the backlight intensity of the display. By pressing the button 4 , you can increase or decrease the brightness.

You can choose between different levels from 0 to 9 (0 = min. - 9 = max.). Press button 5 to confirm your choice.

Setting the contrast

The CONTRAST setting allows you to modify the optical characteristic of the display. By pressing the button 4 you can increase or decrease the contrast.

You can choose between different levels from 0 to 9 (0 = min. - 9 = max.). Press button 5 to confirm your choice.

Setting the acoustic signal

The machine is provided with an acoustic device, which sounds in the following cases:

•at the end of the programme

•in the event of operating problems

Daily use 11

If you wish to activate the acoustic device, press the button 4 in order to select the BUZZER menu. Press button 5 to confirm your choice. The line around the corresponding symbol starts blinking in order to indicate that the regulation can be carried out.

Press again the button 4 to activate or deactivate the acoustic signal. Then press the button 5 to confirm your choice.

Return to main menu

This setting function allows you to return to the option menu. Locate the BACK option by pressing the button 4 .

Press the button 5 to confirm your choice.

DAILY USE

The appliance is provided with a weight sensor that permits to measure the quantity of laundry loaded into the drum and advices you on the detergent quantity to use. Before switching the appliance on, make sure that the drum is empty. If you do not, the washing will subsequently not be registered properly by the weight sensor. See chapter «Weight sensor».

Open the door

Open the door by carefully pulling the door handle outwards.

Select the required programme by means of selector dial (1)

The machine is switched on now.

You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses) and the washing temperature according to the type of laundry.

The pilot light of the button 7 starts blinking and the display shows the programme name and the duration of the selected programme.

The selector dial can be turned either clockwise or anticlockwise. Position to Switching OFF of the machine.

At the end of the programme the selector dial must be turned to position , to switch the machine off.

CAUTION!

If you turn the programme selector dial to another programme when the machine is working, the message «Please turn programme selector in the last used position» will appear on the display.

To change a running programme please refer to «Altering an option or a running programme».

Weight sensor

After some seconds you switched the appliance on the following indicators appear on the display if the door is open:

12Daily use

•the maximum load capacity of the selected programme, (i.e. 8 KG for Cottons; see «Washing Programmes» for the maximum load of each programme),

•the actual loading from 0.0 KG to the maximum load provided for the selected washing programme. Loads of less than 0.5 KG are not displayed,

•the animated bar that also fills itself with steps corresponding to 0.5 KG ,

•the detergent quantity recommended for current load expressed as a percentage.

If too much laundry has been loaded into the machine, the message «Over Loaded» appears in the display. Please remove the relevant amount of laundry in such cases. Press any button or close the door to let the display show again the information about the washing programme.

If settings are not undertaken for several seconds during the programme setting process, the loading information appears on the display when the door is open.

The weight and the detergent quantity displayed for each programme are indicative and permits to reduce the detergent consumption.

The indicating weight screen won’t appear any more when the door is closed and after the button 7 has been pressed to start the washing programme.

Load the laundry

1.Place the laundry in the drum, one item at a time, shaking them out as much as possible.

2.Close firmly the door. You must hear a click during closing.

WARNING!

Do not embed the laundry between the door and the rubber joint.

Measure out the detergent and the fabric softener

Your new appliance was designed to reduce water, energy and detergent consumption.