AEG L1245EL, L1045EL User Manual

Download

LAVAMAT L 1045 EL

50 40

1000

900

700

400

LAVAMAT

L 1045 EL UPDATE

LAVAMAT L 1245 EL

The environmentally friendly washing machine Instruction booklet

AUS ERFAHRUNG GUT

Dear customer,

Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.

The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance.

This symbol guides you, step by step, in the operation of the appliance. The information marked with this symbol provides additional instruc-

tions and practical tips on the use of the appliance. Tips and information about economical and ecological use of the

machine are marked with the clover symbol. Should any problems arise, this booklet provides instructions on how to

solve them by yourself; see section “Something not working?”. If this information is not sufficient, please contact our nearest SERVICE

CENTRE (address and telephone numbers are indicated on the enclosed leaflet).

Printed on recycled paper.

People who think ecologically, act accordingly…

Contents

Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Tips for environmental protection

Main features of your washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Programme selector dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

START/PAUSE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

DELAYSTART button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Programme Option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

STAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

QUICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

SOAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

PREWASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

SPIN SPEED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

RINSE HOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Programme progress display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Cancelling a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Altering a programme which is running. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Opening the door after the programme has started. . . . . . . . . . . . . . . . . 15

Detergent dispenser drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Before the first wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Preparing the wash cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Sorting out and preparing the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Weight of laundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Types of fabric and care labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Detergents and additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Which detergent and additive? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

How much detergent?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Liquid detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Adding a water softener (descaling product) . . . . . . . . . . . . . . . . . . . . . . . . . 20

Information on water hardness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Contents

How to wash

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Load the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Add detergent and additive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Selection of the desired wash programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Selection of the desired options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Selection of the SPIN SPEED or RINSE HOLD option . . . . . . . . . . . . . . . . . . . 22

Selection of the EXTRA RINSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Selection of the DELAY START option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Starting the programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

At the end of the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Programme charts: wash and special programmes . . . . . . . . . . . . . . . 26-27

Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

After each wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Periodical cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Door seal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Drain filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Emergency emptying out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Frost precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Something not working? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-33

Unsatisfactory washing results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Instructions for installation and electrical connection. . . . . . . . . . . . . . . 37

Safety instructions for the installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Front view and side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Positioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Levelling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Water drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Permanent connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Safety instructions

The safety of AEG appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.

General safety

• Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local AEGService Force Centre.

• Never start the machine if the electrical supply cable is damaged or the control panel or worktop are so damaged that inner components can be reached.

• Unplug the appliance before carrying out any cleaning or maintenance operations.

• Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.

• Never spray the machine with a jet of water . Danger of electric shock!

• During high temperature wash programmes the door glass may get hot. Do not touch it!

• Let the water cool down before carrying out emergency emptying or before opening the door in an emergency.

• Small animals can gnaw electric wires and water hoses causing electrocution hazard and damage due to water leaks.

Positioning, connection, starting up

• Follow the instructions for positioning and connection.

• Carry out a first wash without laundry (COTTONS 60, with half the amount of detergent) in order to remove any manufacturing residue from the tub and the drum.

• Should the machine be purchased in winter, when temperatures can be below 0°, leave the appliance for 24 hours at ambient temperature before starting it.

Safety instructions

Child safety

• Children are often not aware of how dangerous electrical appliances can be. When the machine is working, children should be carefully supervised and not be allowed to play with the appliance - there is a risk that they could become trapped inside.

• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.

• Keep all detergents in a safe place out of children’s reach.

• Make sure that children or pets do not climb into the drum.

• When the appliance is to be scrapped, cut off the electrical supply cable and destroy the plug with the remaining cable. Disable the door catch in order to prevent children from becoming trapped inside while playing.

Proper use

• This appliance is designed for domestic use only. If the machine is used for any other purposes or is not used correctly, the manufacturer accepts no responsibility for any damage that might occur.

• For safety reasons, the appliance must not be modified.

• Use only detergents suitable for washing machines and follow the manufacturer’s instructions.

• Garments which have been in contact with flammable solvents should not be machine washed.

• Do not use your machine for dry cleaning.

• Dyes and bleaching agents may only be used if specifically permitted by the manufacturer of these products. We cannot be held responsible for any damage.

• Always unplug the appliance and turn off the water tap after use.

Disposal

Packaging materials

The materials marked with the symbol are recyclable.

>PE<=polyethylene >PS<=polystyrene >PP<=polypropylene

This means that they can be recycled by disposing of them properly in appropriate collection containers.

Machine

Use authorised disposal sites for your old appliance. Help to keep your country tidy!

Tips for environmental protection

To save water, energy and to help protect the environment, we recommend that you follow these tips:

• Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).

• Use the energy saving programme when washing normally soiled garments.

• The machine works more economically if it is fully loaded.

• When small loads are washed, use only half to two thirds of the recommended amount of detergent.

• With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.

• If the water has a medium or high degree of hardness (starting from hardness degree II, see “Detergents and additives”) water softeners must be added. The amount of detergent can then be adjusted to hardness degree I (= soft).

Main features of your washing machine

• Programme and temperature setting using the programme selector.

• Stain programme for effectively treating stained washing.

• Energy saving programme for normally soiled cotton items.

• Speed for the final spin can be reduced to 900, 700 or 400 rpm for model L 1045 EL, and to 1000, 900, 700 or 400 rpm for model L 1245 EL.

• RINSE HOLD: the laundry is left immersed in the final rinse water to prevent creasing.

• Delay timer: programme start can be delayed by 1 to 19 hours (e.g. to times with a more economical power rate).

• Programme progress display showing the programme steps selected and the programme phase which is running.

• Because of its gentle washing action, the special wool cycle washes your garments with extreme care.

• 3-compartment drawer for detergent and fabric softener.

• Unbalance detection device: to prevent vibration during spinning.

•

he ECO valve allows total use of detergent and reduces water con-

sumption so saving energy.

Description of the appliance

Detergent drawer

Control panel

Door

Drain pump

Adjustable feet

50 40

30 40

1000

900

700

400

LAVAMAT

L 1045 EL UPDATE

Front view

Control panel

1000

900

700

400

A = Option buttons B = Spin speed button C = Display D = Delay start button E = START/PAUSE button F = Programme progress display G = Programme selector dial

Programme selector dial

The programme selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses) and the washing temperature according to the type of laundry.

The selector dial is divided into 5 sections:

• Cottons

• Synthetics

• Delicates

• Woollens (hand washing)

• Special programmes

The selector dial can be turned either clockwise or anticlockwise. Position E corresponds to the ENERGY SAVING programme at approx.

67°C for normally soiled laundry, extended washing time (cannot be

combined with QUICK ).

Description of the appliance

Position at 40°C = Easy to iron. In this position the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier.

Position = cold wash Position = reset programme/switching off

START/PAUSE button

This button has three functions: a) Start

After having selected the required progr amme, press this button to start the machine. If you have selected the DELAY START option , the machine starts its hourly countdown.

b) Pause To interrupt a programme which is running, press the START/PAUSE

button: the corresponding pilot light starts to flash. To restart the programme from the point at which it was interrupted,

press the START/PAUSE button again. c) Empty out water At the end of a programme which ends with water in the drum (RINSE

HOLD option), press the START/PAUSE button to empty out the water: the machine will empty and spin.

DELAY START button

The wash programme can be delayed from 1 hour up to a maximum of 19 hours.

The button must be pressed after selecting the programme and before pressing the START/PAUSE button.

The figures indicating the delay appear for about 3 seconds in the display. The duration of the selected wash programme is then displayed. After depressing the START/PAUSE button, the machine starts its hourly countdown.

To alter or cancel the preset delay, press the START/PAUSE button, then press the DELAY START button until the required time is displayed or, if you wish to cancel the delay, until the symbol 0 h is displayed.

Then press the START/PAUSE button again. When the delay is cancelled, the display shows the duration of the wash

programme previously selected.

Description of the appliance

Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START/PAUSE button.

When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

STAIN

To treat heavily soiled or stained laundry with stain remover (extended main wash with time optimised stain action phase, not selectable for wool or programmes with temperatures lower than 40°C). This function cannot be used with QUICK , SOAK and PREWASH .

QUICK

By pressing this button the washing time is reduced. For use when washing lightly soiled laundry.

This option is not available with the wool and economy programme and

cannot be used with STAIN .

SOAK

The machine performs a soak of about 30 minutes at 30°C. By pressing the DELAY START button the soak time can be prolonged up to 10 hours max. After this time the wash cycle will automatically start. This function cannot be used with WOOL, PREWASH or STAIN programme. The soak programme ends with a short spin in programmes for Cotton and Synthetics, and with emptying of the water without spinning for Delicates.

PREWASH

The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin in programmes for Cotton and Synthetics, and with emptying of the water without spinning for Delicates.

This option is not available with the wool programme and cannot be used with SOAK and STAINS .

For use when washing heavily soiled laundry. Important: By depressing at the same time buttons and the

machine will perform an extra rinse (see page 23) By depressing at the same time buttons and the acoustic signal

at the end of programme is switched off.

Description of the appliance

1000

900

700

400

1000

900

700

400

1200

SPIN SPEED L1045EL L1245EL

Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme or to select option (RINSE HOLD). The maximum spin speed for cotton is 1000 rpm for model L 1045 EL and 1200 rpm for model L 1245 EL, for synthetics and wool 900 rpm and for delicates 700 rpm.

RINSE HOLD

By selecting this option, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the pilot light (END) on the programme progress display illuminates to indicate that the water must be emptied out.

To empty out water:

• press the START/P AUSE button: after emptying, the machine performs the spin cycle required for the type of wash selected;

• select the spin speed and press START/PAUSE;

• select the DRAIN programme “C” to empty out the water without spinning.

Warning! The progr amme selector dial must be turned first to RESET O and then to the DRAIN programme “C”.

If the water is not emptied out, the machine automatically empties itself after 18 hours.

Display

The display shows the following information:

• Duration of the selected programme (in minutes), calculated auto- matically on the basis of the maximum recommended load for each type of fabric.

• When the programme has finished, a steadily lit zero is displayed.

• Delayed start, (19 hours max.) programmed using the special button

. The countdown is updated every hour.

• Alarm code indicating a fault in the machine operation (see page 3 1).

Description of the appliance

PREWASH

WASH RINSES

EXTRA RINSE SPIN

END

OVERDOSAGE

Programme progress display

By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.

After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END pilot light comes on.

When the programme has finished, if the OVERDOSAGE light comes on, it indicates that too much detergent has been used or that the drain filter is blocked.

Description of the appliance

Cancelling a programme

To cancel a programme which is running, turn the programme selector dial to the RESET O position.

Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to O and then to the DRAIN programme “C”.

Altering a programme which is running

To alter a programme, first set the machine to PAUSE by pressing the START/PAUSE button.

Any function can be modified before the machine starts it. After selecting the new option press the START/PAUSE button again to restart the selected programme.

To modify the selected programme turn the programme selector dial to O and then choose a new programme.

The water is not emptied out and after pressing the START/PAUSE button again the machine restarts with the newly selected programme.

Opening the door after the programme has started

To open the door set the machine to PAUSE by pressing the ST ART/P AUSE button. The door can be opened if:

• the machine is not already heating;

• the water level is not above the bottom edge of the door;

• the drum is not turning. The light on the control panel indicates if the door can be

opened:

• green light: the door can be opened;

• unlit light: the door cannot be opened;

• flashing red light: the door is open.

Description of the appliance

Detergent dispenser drawer

Compartment for prewash or soak detergent and stain remover . The pr ewash or soak detergent is added at the beginning of the wash programme. The stain remover is added during the STAIN-Action phase in the main wash.

Compartment for powder or liquid detergent used for main wash. It is emptied at the beginning of the wash cycle.

Compartment for liquid additives (fabric softener, starch). It is emptied at the last rinse.

The quantity of additives must not exceed the “MAX” mark in the drawer.

Before the first wash

Before your first wash, we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve.

Then, run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.

Pour 1/2 a measure of deter gent into the dispenser dr awer and start the machine.

Preparing the wash cycle

Sorting out and preparing the laundry

• Sort out the laundry according to type of fabrics and care labels (see “Types of fabric and care labels”).

• Empty pockets.

• Remove any metal parts (safety pins, clips, etc.).

• To prevent the laundry from getting damaged and forming bundles, it is advisable to close zips, button up pillowcases and quilt covers and tie up loose straps such as those of aprons.

• Turn double faced items inside out (sleeping bags, anoraks, etc.)

• Turn coloured knitted fabrics, woollens and fabrics with trim inside out.

• Wash small and delicate items (baby socks, tights) inside a laundry net or in a pillow case closed with a zip, or in larger socks.

• Treat curtains with special care. Remove all metal or plastic hooks or put them in a net or a bag. We take no responsibility for any damage.

• Whites and coloureds must be washed separately: white items can loose their whiteness.

• New coloured fabrics often have excess dyes; it is advisable to wash them separately for the first time.

• Wash small and large items together; this impr oves the washing result and the laundry is better distributed during spinning.

• Shake out garments before putting them into the machine.

• Insert each garment separately.

605040 30

Preparing the wash cycle

Weight of laundry

Sort of laundry

1200 gBathrobes 300-600 gWork shirts 700 gQuilt covers 500 gSheets 100 gBlouses 200 gHand towels 100 gTea towels 200 gShirts 200 gPillowcases 200-250 gNight-gowns/Pyjamas 200-300 gTablecloths 250 gUnderwear

Types of fabric and care labels

The labels on garments help you to select the most suitable wash programme. The laundry should be sorted out according to the type of fabric and the instructions indicated on care labels.

Temperatures indicated on labels are always maximum temperatures.

Cotton

Linen and cottons marked with this symbol can be washed at high temperatures.

Cotton

Linen and cottons marked with this symbol are colourfast and can be washed at 60°C.

Cotton

Garments marked with these symbols have delicate colours, therefore the washing temperature must not exceed these values.

Synthetics

Mixed and synthetic fabrics marked with these symbols require a gentle wash programme and they must therefore be washed using the specific programme.

Approximate

dry weights

Preparing the wash cycle

Delicates

Microfibres, synthetics or curtains marked with these symbols require a very gentle treatment. The DELICATES programme is suitable for this type of fabric.

Woollens and particularly delicate items

Fabrics such as wool, wool mix or silk marked with this symbol are particularly sensitive to machine washing. The WOOLLENS programme is suitable for this type of fabric.

If the label has the symbol (do not wash), the garments must not be machine washed!

Preparing the wash cycle

Detergents and additives

Which detergent and additive?

Use only detergents and additives for washing machines. Follow the manufacturer’s instructions.

How much detergent?

The quantity depends on:

• the load: if the manufacturer does not provide any indications on the amount of detergent for small loads, use about one third less than the suggested amount for half loads and half the amount for very small loads;

• the degree of soil: use a small amount of detergent for lightly soiled garments. Judge the amount according to the detergent manufacturer’s instructions and size of the load;

• the water hardness: the harder the water, the more detergent required. Instructions according to water hardness are given on the detergent pack.

Liquid detergent

Liquid detergent can be poured directly into the main wash compartment of the dispenser drawer immediately before starting the programme, or a special dispenser can be used that is placed directly in the drum. Measure the detergent according to the manufacturer’s instructions.

Adding a water softener (descaling product)

A water softener must be added when water has a medium-high degree of hardness (from degree of hardness II). Follow the manufacturer’s instructions. The quantity of detergent can then always be adjusted to degree of hardness I (= soft). Information on water hardness can be obtained from your local water supply authority.

Information on water hardness

Degree of hardness French degrees °TH

German degrees °dH

0-7I=Soft

0-15 16-257-14II=Medium 26-3714-21III=Hard

more than 37more than 21IV=Very hard

How to wash

Load the laundry

Open the door. Place the laundry in the drum, one item at a time. Distribute laundry as

evenly as possible. Close the door.

Add detergent and additive

Pull the drawer out till it stops.

Pour the main wash detergent into compartment .

If you wish to perform a prewash, a SOAK or a STAIN-Action programme, pour detergent or stain remover into compartment .

Important! Do not use normal detergent for the STAIN-Action programme, always use a STAIN remover.

Pour the fabric softener into compartment without exceeding the “MAX” mark.

Close the drawer gently, pushing it fully in.

How to wash

1000

900

700

400

1000

900

700

400

1200

Selection of the desired wash programme

Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on. The display shows the duration of the programme.

Selection of the desired options

depending on the degree of soil of the laundry. The corresponding light comes on.

Selection of the spin speed or RINSE HOLD option

It is possible to select a lower spin speed L1045EL L1245EL by means of the relevant button; the light corresponding to the selected speed comes on.

Selecting option (RINSE HOLD) the laundry is left immersed in the final rinse water.

If the spin speed is not reduced , the final spin speed will be as follows:

L 1045 EL L 1245 EL

- cottons 1000 r.p.m. 1200 r.p.m.

- synthetics 900 r.p.m. 900 r.p.m.

- delicates 700 r.p.m. 700 r.p.m.

- wool (hand washing) 900 r.p.m. 900 r.p.m.

EXTRA RINSE

This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (extra rinse).

The extra rinse is available only with the cotton, synthetics or delicate programme.

Selection of the EXTRA RINSE option

Press simultaneously buttons and for about 3 seconds: the

light comes on in the programme progress display. This function stays permanently on. To remove it press buttons and again until the light comes off.

Selection of the DELAY START option

To delay starting of a programme, press the DELAY START button before starting the machine. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display.

If button (SOAK) has been pressed the selected delay will correspond to the soak time. If no delay time is selected the soak programme will last about 30 minutes.

When the START/PAUSE button is pressed, the selected delay will appear again on the display and the machine starts its countdown.

How to wash

PREWASH

WASH RINSES

EXTRA RINSE SPIN

END

OVERDOSAGE

Starting the programme

1. Check that the water tap is open.

2. Press START/PAUSE to start the programme. If the Delay Start option has been selected the programme will start at the end of the countdown. If the door light is red and flashing at the start of the programme it indicates that the door is open. Close the door and press the START/PAUSE button again. If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to modify or cancel the delay time.

• Load other laundry: press the START/PAUSE button. Open the door. Load the laundry. Close the door and press the START/PAUSE button again.

• Modify or cancel the delay time: press the START/PAUSE button. Press the DELAY START button until the time required appears on the display, or 0h, if you wish to cancel it. Press the START/ PAUSE button again.

Programme progress display

By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.

Display

The time to the end of the programme decreases minute by minute and appears on the display.

At the end of the programme

The machine stops automatically. A zero appears on the display. An acoustic signal is clearly audible. The END light comes on in the programme progress display.

If the light (OVERDOSAGE) comes on it indicates that too much detergent has been used. At the next wash carefully follow the detergent manufacturer’s instructions. Measure out detergent according to amount, type, degree of soil of fabrics and water hardness.

This light could come on also when the drain filter is blocked.

If the RINSE HOLD option has been selected, the water must be emptied out before opening the door either

- by pressing the START/PAUSE button (the laundry will be spun at the speed corresponding to the selected type of fabrics. The spin speed can be reduced by means of the SPIN SPEED button)

- or by turning the selector dial to O and then to DRAIN “C” and pressing the START/PAUSE button again. In this case the water will be emptied, but the laundry is not spun.

Turn the selector dial to O. Remove the laundry from the drum. Check that the drum is empty so as to avoid any forgotten items

being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.

Close the water tap. Leave the door open to prevent the formation of mildew and unpleas-

ant smells.

How to wash

Programme chart

Wash programmes

Wash

programme

White

Cottons

Whites

ECONOMY

Coloured

cottons

Synthetics

Delicates

Wool

Temp.

95°-60°

60°

60°-50° 40°-30°

COLD

60°-50°

40°

COLD

40°-30°

COLD

40°-30

COLD

Cotton and linen, for example normally soiled work garments, sheets, household linen, underwear, towels.

Cotton and linen, for example normally to lightly soiled sheets and household linen.

Coloured cotton or linen fabric, shirts, underwear, towels.

Synthetic fabrics, underwear, coloured garments, non-shrink shirts, blouses.

Delicate fabrics, for example curtains.

Wool, wool mixtures, silk.

Fabrics

Additional

functions

STAIN SOAK QUICK PREWASH EXTRA RINSE RINSE HOLD SPIN SPEED

STAIN SOAK PREWASH EXTRA RINSE RINSE HOLD SPIN SPEED

STAIN SOAK QUICK PREWASH EXTRA RINSE RINSE HOLD SPIN SPEED

RINSE HOLD SPIN SPEED

Max.

load

4 kg

1.5 kg

1 kg

Consumption*

Energy

kWh

1.7

1.0

0.76

0.7

0.45

0.4

Water

lt.

Duration

min.

146

133

130

In compliance with EC directive 92/75, the consumption figures indicated on the energy label refer to the 60°C wash progr amme for cotton with a load of 4 kg.

* The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperatur e. It r efer s to the highest temperature for each wash programme.

Programme chart

Special programmes

Descrip-

tion

This programme can be used for rinsing hand washed garments.

Hand washed garments to be starched or softened.

For emptying out the last rinse water in programmes with the Rinse Hold option

Separate spin for cottons.

Programme phases

3 rinses with liquid additive. Short spin. (700 rpm max)

1 rinse with liquid additive. Long spin.

The water is emptied out.

Long spin.

Programme

Gentle

rinses

Softeners

Drain

Spin

Additional

functions

EXTRA RINSE RINSE HOLD SPIN SPEED

RINSE HOLD SPIN SPEED

SPIN SPEED

Max.

load

4 kg

Consumption*

Energy

kWh

0.1

Water

lt.

Duration

min.

Separate spin for synthetics

Short spin

Reset/Off

and delicate fabrics.

Short spin. (700 rpm max)

For cancelling the programme which is running or to switch the machine off.

SPIN SPEED

1.5 kg

Cleaning and maintenance

After each wash

At the end of the wash programme, pull the dispenser drawer out a little to let it dry.

Leave the door ajar to allow air to circulate.

If the machine is not used for a prolonged period:

Close the water tap and unplug the appliance.

Periodical cleaning

Exterior

Clean the outside of the cabinet with soap and water only. Rinse with clean water and dry.

Important: do not use methylated spirits, solvents or similar products to clean the cabinet.

Detergent dispenser drawer

After a while, detergents and fabric softeners leave deposits in the drawer.

Clean the drawer, from time to time, by rinsing it under a running tap. To remove the drawer from the machine, press the button in the rear left-hand corner.

To facilitate cleaning, the top part of the additive compartment can be removed.

Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush.

Refit the drawer after cleaning.

Cleaning and maintenance

Door seal

Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if

the machine does not empty and/or spin the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump.

Proceed as follows: Disconnect the appliance. If necessary wait until the water has cooled down. Open the pump door.

Place a container close to the pump to collect any spillage. Release the emer-

gency emptying hose, place it in the container and remove its cap.

When no more water comes out, unscrew the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump.

Remove any objects from the pump impeller by rotating it.

Put the cap back on the emergency emptying hose and place the latter back in its seat.

Screw the pump fully in. Close the pump door.

Water inlet filter

If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked.

Turn off the water tap.

Cleaning and maintenance

Unscrew the hose from the tap. Clean the filter with a stiff brush. Screw the hose back onto the tap.

Emergency emptying out

If the water is not discharged (pump is blocked, filter or drain pipe are clogged), proceed as follows to empty out the machine:

• pull out the plug from the power socket;

• close the water tap;

• if necessary, wait until the water has cooled;

• place a bowl on the floor;

• put the drain hose end into the bowl and let the water come out.

Should it not be possible to have access to the drain hose because, for example the appliance is built in the kitchen furniture, slightly loosen the drain filter after placing a bowl on the floor to let the water come out slowly.

At the end screw the pump again.

Frost precautions

If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows:

• Close the water tap and unscrew the water inlet hose from the tap.

• Place the end of the drain hose and the inlet hose in a bowl placed

on the floor.

• Select the “DRAIN” programme “C” and run it until the machine stops.

• Turn the programme selector dial to O (RESET).

• Remove the plug from the power socket.

• Screw the water inlet hose back on and put the drain hose back in its

place.

By doing this, any water remaining in the machine is removed, avoiding ice forming and consequently damage to the appliance.

When you use the machine again, make sure that the ambient temperature is above 0°C.

Important

Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the DRAIN progr amme. This will activate the ECO valve allowing a total use of the detergent in the next wash.

Something not working?

If during the spin cycle the machine makes an unusual whistling noise, different from the noise made by traditional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instructions below.

If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the call-out will be charged even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

- E10: problem with the water supply (phase light is on)

- E20: problem with water draining (phase light is on)

- E40: door open (phase light is on) Once the problem has been eliminated, press the START/PAUSE button

to restart the programme. If after all checks, the problem persists, contact your local AEGService Force Centre.

Problem

The machine does not work

Possible cause

The main electrical fuse Replace the fuse. has blown.

The door is not properly Close the door; the click closed (E40). of the lock should be heard.

The plug is not connected. Insert the plug. The START button has not Press the button.

been pressed. The DELAY START Check the selected delay on

option has been selected. the display.

Solution

Something not working?

Problem

The machine does not fill

The machine fills then empties immediately

The machine does not empty and/or does not spin

There is water on the floor

Possible cause

The water tap is closed (E10). Open the water tap. The water inlet hose is Check the whole length of the

squashed or kinked (E10). hose and remove the kink. The small filter of the water Clean the filter.

inlet hose is clogged (E10). The door is not properly Close the door.

closed (E40). The end of the drain hose Place the hose at the right

is too low. height (see Installation

section).

The drain hose is Check the whole length of squashed or kinked (E20). the hose and remove the

kink.

The drain filter or the Clean the filter or check drain hose are clogged (E20). the hose.

The RINSE HOLD option Empty out the water by (stop with water in drum) pressing the START button has been selected. or selecting the DRAIN

programme.

The laundry is not evenly Redistribute the laundry distributed inside the drum. manually in the drum.

Too much detergent has Measure detergent been used. according to the

manufacturer’s instructions.

An unsuitable detergent Use a suitable washing has been used that machine detergent. creates too much foam.

One of the connectors on Check that the hose is the water inlet hose is firmly screwed on at both leaking. ends.

The drain filter has not Fully screw the filter into been properly screwed on place. after cleaning.

Solution

Something not working?

Problem

The machine vibrates or is noisy

The door will not open

Spinning starts late or the machine does not spin

Possible cause

The transit bolts have Check that the machine not been removed. has been unpacked as

described in the Installation section.

The feet have not been Carefully level the machine. adjusted.

There is little laundry in Correct operation of the the drum. machine is not affected.

The programme is still Wait until the end of the running and the drum programme before opening is turning. the door.

The water level is above the Before opening the door, bottom edge of the door. the water must be emptied

out.

The machine is heating the Wait until the end of the water. heating phase.

The unbalance detection If the laundry is not evenly device that prevents distributed inside the drum excessive vibration during at the beginning of the spinning has cut in. spin cycle, the machine

detects this and tries to redistribute it more evenly by means of a few drum rotations. Only when the laundry is more evenly distributed will the spin cycle be performed, at a lower speed, if the laundry is not evenly distributed. If, after about 10 minutes, the laundry is still tangled, the machine will not spin. Therefore, if the laundry is still wet at the end of the cycle, it is advisable to redistribute it manually inside the drum and to select the spin programme.

Solution

Something not working?

Unsatisfactory washing results

If the laundry looks grey and lime scale is found in the drum

• Too little detergent has been used.

• An unsuitable detergent has been used.

• Stubborn stains have not been treated prior to washing.

• The programme/temperature has not been correctly selected.

If grey stains remain on the laundry

• Laundry stained with ointments, grease or oil has been washed with

an insufficient amount of detergent.

• The temperature selected for the wash programme was too low.

• Fabric softener - especially the concentrated type - has come into

direct contact with the laundry. Wash these stains immediately and pour fabric softener carefully.

Foam is still visible even after the last rinse

• Modern detergents often produce foam, even in the last rinse. How-

ever the laundry has been completely rinsed.

White residue is left on the laundry

• This is due to insoluble components in modern detergents and is

therefore not the result of insufficient rinsing. Shake or brush the laundry. In futur e, it may be better to turn garments inside out befor e washing them. Check the choice of detergent; try using liquid detergents.

Technical data

Height x Width x Depth 84x60x45 cm Depth with door opened 82 cm Height adjustment ± 13 mm approx. Load (depending on programme) 4 kg max. Use domestic Drum speed during washing max. 55 rpm Drum speed during spinning 1000/900/700/400 rpm (L 1045 EL)

1200/1000/900/700/400 rpm (L 1245 EL)

Water pressure 50-800 kPa

This appliance complies with the following EC directives:

- 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive 93 / 68 / EEC

- 89/336/EEC of 3.5.1989 “Electromagnetic Compatibility Directive”.

Service

Made in Italy

Mod. L 1045 EL Type P6186637 Prod.No. 914512202 00 220-230V~50Hz 2200W 10 A

Ser.No.

IPX4

In the section “Something not working?” some problems that can be solved by yourself are listed. Read this section in the event of problems. If you are not able to find a solution, contact the Service centre. (Addresses and telephone numbers are given on the enclosed leaflet).

In all cases, explain your problem carefully, in order to facilitate troubleshooting: the engineer will be able to decide whether a service call is necessary.

Take note of the serial number (Ser.No.) and the product number (Prod. No.) indicated on the rating plate.

Ser. No. . . . . . . . . . . . . . . . . . . . . . . .

Prod. No. . . . . . . . . . . . . . . . . . . . . . .

Furthermore, try to specify, as precisely as possible:

- The symptoms of the fault

- When the fault occurs

- The alarm code displayed

When can a service visit be charged during the guarantee period?

- when it should have been possible to solve the problem by yourself, with the help of the troubleshooting chart (see section “Something not working?”)

- when the engineer has to come out several times because he has not been given all the relevant information he needs and so, for example, has to fetch spare parts. Repeated trips can be avoided if you prepare your call to the Service centre as described above.

Instructions for installation and electrical connection

Safety instructions for the installer

• This appliance is heavy, care should be taken when moving it.

• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

• All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not completely removed. Refer to the relevant paragraph.

• Any electrical work required to install this appliance must be carried out by a qualified electrician.

• Any plumbing work required to install this appliance must be carried out by a qualified plumber.

• After having installed the machine, check that it is not standing on its electrical supply cable.

• If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the adjustable feet and the floor.

• The installation should comply with local water authority and building regulations requirements.

• Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre.

Dimensions of the appliance

595

835

60 50

1000

900

700

400

LAVAMAT

L 1045 EL UPDATE

445

820

Front view and side view

Rear view

335

170

Cold water

Power cable

Drain

P0001

P1124

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

Using a spanner, unscrew and remove the 2 rear bottom screws. Slide out the 2 plastic pins. Lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.

Remove the polystyrene block from the bottom of the machine and release the two plastic bags.

Carefully slide out the left-hand bag removing it towards the right and then downwards.

Slide out the right-hand bag removing it towards the left and then upwards.

Set the machine upright and remove the remaining rear screw. Slide out the relevant pin.

Plug the open holes with the plugs which you will find in the plastic bag containing the instruction booklet.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

Installation

Positioning

Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by

carpets, rugs etc.

• Before placing it on small tiles, apply a rubber coating.

• Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.

• If it is impossible to avoid positioning the machine next to a gas cooker or coal-burning stove, an insulating panel (85x57 cm) covered with aluminium foil on the side facing the cooker or stove, must be inserted between the two appliances;

• The machine must not be installed in rooms where the temperature can drop below 0.

• The water inlet hose and the drain hose must not be kinked.

• Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.

Levelling

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Water inlet

Connect the water inlet hose supplied with the machine to a separate tap with a 3/4" thread. Do not

use already employed hoses.

IImmppoorrttaanntt!!

Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.

The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks.

The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new , longer hose specially designed for this type of use.

Water drainage

The end of the drain hose can be positioned in three ways:

Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end

cannot come unhooked when the machine is emptying.

This could be done by tying it to the tap with a piece of string or attaching it to the wall.

In a sink drain pipe branch.This branch must be above the trap so that the bend is at least 60 cm above the ground.

Directly into a drain pipe at a height of not less

than 60 cm and not more than 90 cm.

The end of the drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose.

The drain hose must not be kinked.

For a correct functioning of the machine the drain hose must remain hooked on the proper support piece situated on the top part of the back side of the appliance.

Installation

Electrical connection

This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply.

Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use.

Installation

Connect the machine to an earthed socket. The manufacturer does not accept any responsibility for damage or

injury through failure to comply with the above safety precaution.

Permanent connection

In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

This operation must be performed by a qualified electrician. Important: The power supply cable must be easily accessible after

installing the machine.

AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg

132.992.870-01-0603

AEG L1245EL, L1045EL User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual