AEG HK654200IB User Manual

HK654200IB

EN

INDUCTION HOB USER MANUAL

2

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect,
from specialist cookware to cutlery baskets, from bottle holders to delicate
laundry bags…

Visit the webshop at:
www.aeg.com/shop

CONTENTS

4 Safety information
5 Installation instructions
8 Product description

9 Operating instructions
13 Helpful hints and tips
15 Care and cleaning
15 What to do if…
16 Environment concerns

Contents

3

The following symbols are used in this user
manual:

Important information concerning your
personal safety and information on how to
avoid damaging the appliance.

General information and tips

Environmental information

Subject to change without notice

4 Safety information

SAFETY INFORMATION

For your safety and correct operation of the appliance, read this manual carefully before
the installation and use. Always keep these instructions with the appliance also if you move
or sell it. The users must fully know the operation and safety functions of the appliance.

Children and vulnerable people safety

WARNING!

Do not let persons, children included, with reduced physical sensory, reduced mental func­tions or lack of experience and knowledge to use the appliance. They must have supervision
or instruction for the operation of the appliance by a person who is responsible for their
safety.

• Keep all packaging away from children. There is the risk of suffocation or injury.

• Keep the children away from the appliance during and after the operation, until the ap­pliance is cold.

WARNING!

Activate the child safety device to prevent small children and pets from an accidental acti­vation of the appliance.

Safety during operation

• Remove all packaging, stickers and layers from the appliance before the first use.

• Set the cooking zones to "off" after each use.

• The risk of burns! Do not put the objects made of metal, for example cutlery or saucepan
lids, on the surface that you cook. They can become hot.

• The Users with an implanted pacemaker must keep their upper body minimum 30 cm
from induction cooking zones that are activated.

WARNING!

Fire risk! Too hot fats and oils can occur with ignition very quickly.

Correct operation

• Always monitor the appliance during operation.

• The appliance is only for domestic use!

• Do not use the appliance as a work or a storage surface.

• Do not put or keep very flammable liquids and materials, easy fusible objects (made of
plastic or aluminium) on or near the appliance.

• Be careful when you connect the appliance to the near sockets. Do not let the electricity
bonds touch the appliance or hot cookware. Do not let the electricity bonds to tangle.

How to prevent a damage to the appliance.

• If the objects or cookware fall on the glass, the surface can be damaged.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can cause
scratch of the glass. Do not move them on the surface.

Installation instructions

• Do not let cookware boil dry to prevent the damage to cookware and glass .

• Do not use the cooking zones with empty cookware or without cookware.

• Do not put the aluminium foil on the appliance.

• Make sure that the airflow space of 5 mm between the worktop and front of the unit
below it stays opened.

WARNING!

If there is a crack on the surface, disconnect power supply to prevent the electrical
shock.

INSTALLATION INSTRUCTIONS

Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The
rating plate of the appliance is on its lower casing.

58 GAD D5 AU

AEG

HK654200IB

220-240 V 50-60-Hz Induction 7,4 kW

The Safety Instructions

WARNING!

You must read these!

• Make sure that the appliance is not damaged because of transportation. Do not connect
a damaged appliance. If it is necessary, speak to the supplier.

• Only an authorized servicing technician can install, connect or repair this appliance. Use
only original spare parts.

• Only use the built-in appliances after you assemble the appliance into correct built-in
units and work surfaces that align to the standards.

• Do not change the specifications or change this product. Risk of injury and damage to
the appliance.

• Fully obey the laws, ordinances, directives and standards in force in the country where
you use the appliance (safety regulations, recycling regulations, electrical safety rules
etc.)!

• Keep the minimum distances to other appliances and units!

• Install shock protection, for example install the drawers only with a protective floor di­rectly below the appliance!

• Keep safe the cut surfaces of the worktop from moisture with a correct sealant!

• Seal the appliance to the work top with no space between with a correct sealant!

• Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher
or oven!

• Do not install the appliance adjacent to doors and below windows! If not, when you
open the doors or windows they can push off hot cookware from the appliance.

949 595 103 00

7,4 kW

5

6 Installation instructions

WARNING!

Risk of injury from electrical current. Carefully obey the instructions for electrical connec­tions.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Install correctly to give shock protection.

• Loose and incorrect plug and socket connections can make the terminal become too hot.

• A qualified electrician must install the connections in the clamps correctly.

• Use a strain relief clamp on cable.

• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or
two phase connection.

• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or
higher). Speak to your local Service Centre.

The appliance must have the electrical installation which lets you disconnect the appliance
from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.

To attach the seal to the rabbet

• Clean the rabbet in the work surface.

• Bond the seal stripe supplied on the upper surface of the rabbet along the edges of the
cut out section.

• Cut the seal stripe into four pieces in relation to the length of the edges of the rabbet.

• For the four corners of the rabbet the ends of the seal stripes must be cut into mitres. Do
not bond the ends over one another.

• Bond the seal stripe flush into the corner of the rabbet. Make sure that no silicon com­pound can get below the glass ceramic when grouting.

• Do not extend the tapes.

Assembly

min.
50mm

min.
500mm

min.
50mm

min.
5mm