FSK52600P
USER MANUAL
EN |
User Manual |
2 |
DE |
Dishwasher |
|
Benutzerinformation |
24 |
|
|
Geschirrspüler |
|
2www.aeg.com
1. |
SAFETY INFORMATION............................................................................................. |
2 |
|
2. |
SAFETY INSTRUCTIONS............................................................................................. |
4 |
|
3. |
PRODUCT DESCRIPTION........................................................................................... |
6 |
|
4. |
CONTROL PANEL....................................................................................................... |
7 |
|
5. |
PROGRAMMES............................................................................................................ |
7 |
|
6. |
SETTINGS..................................................................................................................... |
9 |
|
7. |
OPTIONS.................................................................................................................... |
12 |
|
8. |
BEFORE FIRST USE................................................................................................... |
12 |
|
9. |
DAILY USE.................................................................................................................. |
14 |
|
10. |
HINTS AND TIPS..................................................................................................... |
15 |
|
11. |
CARE AND CLEANING.......................................................................................... |
17 |
|
12. |
TROUBLESHOOTING............................................................................................. |
19 |
|
13. |
PRODUCT INFORMATION SHEET ....................................................................... |
22 |
|
14. |
ADDITIONAL TECHNICAL INFORMATION......................................................... |
23 |
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.
The information can be found on the rating plate. Warning / Caution-Safety information
General information and tips Environmental information
Subject to change without notice.
Before the installation and use of the appliance, carefully read the supplied instructions. The
ENGLISH 3
manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
•This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
•Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
•Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
•Do not let children play with the appliance.
•Keep detergents away from children.
•Keep children and pets away from the appliance when the door is open.
•Children shall not carry out cleaning and user maintenance of the appliance without supervision.
•This appliance is intended to be used in household and similar applications such as:
–farm houses; staff kitchen areas in shops, offices and other working environments;
–by clients in hotels, motels, bed & breakfast and other residential type environments.
•Do not change the specification of this appliance.
•The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa)
•Obey the maximum number of 13 place settings.
4www.aeg.com
•If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
•Put the cutlery in the cutlery basket with the sharp ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down.
•Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it.
•Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
•Do not use high pressure water sprays and/or steam to clean the appliance.
•If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet.
•The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.
WARNING!
Only a qualified person must install this appliance.
•Remove all the packaging.
•Do not install or use a damaged appliance.
•Do not use the appliance before installing it in the built-in structure due to safety manner.
•Follow the installation instructions supplied with the appliance.
•Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
•Do not install or use the appliance where the temperature is less than 0 °C.
•Install the appliance in a safe and suitable place that meets installation requirements.
WARNING!
Risk of fire and electric shock.
•The appliance must be earthed.
•Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
•Always use a correctly installed shockproof socket.
•Do not use multi-plug adapters and extension cables.
•Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
•Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
•Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
•This appliance complies with the E.E.C. Directives.
•UK and Ireland only. This appliance is fitted with a 13 A mains plug. If it is necessary to change the mains plug fuse, use only a 13 A ASTA (BS 1362) fuse.
•Do not cause damage to the water hoses.
•Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
•Ensure that there are no visible water leaks during and after the first use of the appliance.
•The water inlet hose has a safety valve and a sheath with an inner mains cable.
WARNING!
Dangerous voltage.
•If the water inlet hose is damaged, immediately close the water tap and
ENGLISH 5
disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose.
2.4Use
•Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
•Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging.
•Do not drink and play with the water in the appliance.
•Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the dishes.
•Do not sit or stand on the open door of the appliance.
•The appliance can release hot steam if you open the door while a programme operates.
•To repair the appliance contact the Authorised Service Centre.
•Use original spare parts only.
WARNING!
Risk of injury or suffocation.
•Disconnect the appliance from the mains supply.
•Cut off the mains cable and discard it.
•Remove the door catch to prevent children and pets to get closed in the appliance.
6www.aeg.com
1 |
|
2 |
|
3 |
|
|
|
|
|
|
|
12
11 |
10 |
9 |
8 |
7 |
6 |
5 |
4 |
Top spray arm
Upper spray arm
Lower spray arm
Filters
Rating plate
Salt container
Air vent
The Beam-on-Floor is a light that is displayed on the floor below the appliance door.
•When the programme starts, a red light comes on and stays on for the duration of the programme.
•When the programme is completed, a green light comes on.
•When the appliance has a malfunction, the red light flashes.
Rinse aid dispenser
Detergent dispenser
Cutlery basket
Lower basket
Upper basket
The Beam-on-Floor is off when the appliance is deactivated.
When AirDry is activated during the drying phase, the projection on the floor may not be completely visible. To see if the cycle has ended, check the control panel.
ENGLISH 7
|
1 |
|
|
2 |
|
3 |
|
4 |
|
5 |
|
6 |
|
7 |
|
8 |
|
9 |
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On/off button |
|
TimeSaver button |
|
Display |
|
XtraDry button |
|
|
||
|
Delay button |
|
RESET button |
|
|
||
|
Program button |
|
Indicators |
|
|
||
|
ExtraHygiene button |
|
|
|
|
|
Indicator |
Description |
|
|
|
Salt indicator. It is on when the salt container needs refilling. |
|
|
|
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. |
|
|
|
End indicator. It is on when the programme is completed. |
|
|
The numbering of the programmes in the table (P1, P2, etc.) reflects their sequence on the control panel.
The order of the programmes in the table may not reflect their sequence on the control panel.
Programme |
Degree of soil |
Programme phases |
Options |
|||
|
Type of load |
|
|
|
|
|
|
|
|
|
|
|
|
P1 |
• |
Normal soil |
• |
Prewash |
• |
ExtraHygiene |
1) |
• |
Crockery and |
• |
Wash 50 °C |
• |
XtraDry |
|
|
cutlery |
• |
Rinses |
|
|
|
|
|
• |
Dry |
|
|
|
|
|
|
|
|
|
P2 |
• |
All |
• |
Prewash |
• |
ExtraHygiene |
2) |
• |
Crockery, cut- |
• |
Wash from 45 °C to 70 |
• |
XtraDry |
|
|
lery, pots and |
|
°C |
|
|
|
|
pans |
• |
Rinses |
|
|
|
|
|
• |
Dry |
|
|
|
|
|
|
|
|
|
P3 |
• |
Heavy soil |
• |
Prewash |
• |
ExtraHygiene |
3) |
• |
Crockery, cut- |
• |
Wash 70 °C |
• |
TimeSaver |
|
|
lery, pots and |
• |
Rinses |
• |
XtraDry |
|
|
pans |
• |
Dry |
|
|
|
|
|
|
|
|
|
8 www.aeg.com
Programme |
Degree of soil |
Programme phases |
Options |
|||||
|
|
|
Type of load |
|
|
|
|
|
|
|
|
|
|
|
|
||
P5 |
• |
Normal or light |
• |
Wash 45 °C |
• |
XtraDry |
||
4) |
|
soil |
• |
Rinses |
|
|
||
|
|
|
• |
Delicate crock- |
• |
Dry |
|
|
|
|
|
|
ery and glass- |
|
|
|
|
|
|
|
|
ware |
|
|
|
|
|
|
|
|
|
|
|
||
P4 |
• |
Fresh soil |
• |
Wash 60 °C |
• |
ExtraHygiene |
||
|
|
5) |
• |
Crockery and |
• |
Rinses |
• |
XtraDry |
|
|
|
|
cutlery |
|
|
|
|
1)This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes.
2)The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of water as well as the wash duration.
3)This programme is designed to wash heavily soiled items with high water pressure and at a high temperature.
4)This programme controls the temperature of the water to provide special care for delicate items, glassware in particular.
5)This programme is suitable for washing a load or a half load with fresh or light soil in a short time.
Programme 1) |
Water |
Energy |
Duration |
||
|
|
(l) |
(kWh) |
(min) |
|
|
|
|
|
||
P1 |
10.5 |
0.921 |
235 |
||
|
|
|
|
||
P2 |
8 - 15 |
0.7 - 1.7 |
46 - 170 |
||
|
|
|
|
|
|
P3 |
12.5 |
- 14.5 |
1.4 - 1.7 |
170 |
- 190 |
|
|
|
|
|
|
P5 |
12 |
- 14 |
0.8 - 1.0 |
82 |
- 92 |
|
|
|
|
||
P4 |
10 |
0.9 |
30 |
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
To receive the necessary information for conducting performance tests (e.g. according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the product number code (PNC) found on the rating plate.
For any other questions regarding your dishwasher please refer to the service book provided with your appliance.
ENGLISH 9
When the appliance is in programme selection mode it is possible to set a programme and to enter user mode.
Settings available in the user mode:
•The level of water softener according to the water hardness.
•Activation or deactivation of the rinse aid empty notification.
•The level of rinse aid according to the required dosage.
•Activation or deactivation of the acoustic signal for the end of a programme.
•Activation or deactivation of the AirDry.
As the appliance stores the saved settings, there is no need to configure it before every cycle.
The appliance is in programme selection mode when the display shows the programme number P1.
After activation, the appliance is in programme selection mode by default. If not, set the programme selection mode the following way:
Press and hold RESET until the appliance is in programme selection mode.
Make sure the appliance is in programme selection mode.
To enter the user mode, press and hold simultaneously and until the
indicators , , , and flash and the display is blank.
The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance.
The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales.
The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results.
Softening hard water increases the consumption of water and energy as well as the programme duration. The higher the level of water softener, the higher the consumption and the longer the duration.
Water hardness
German de- |
French degrees |
mmol / l |
Clarke de- |
Water softener lev- |
grees (°dH) |
(°fH) |
|
grees |
el |
|
|
|
|
|
47 - 50 |
84 - 90 |
8.4 - 9.0 |
58 - 63 |
10 |
|
|
|
|
|
43 - 46 |
76 - 83 |
7.6 - 8.3 |
53 - 57 |
9 |
|
|
|
|
|
37 - 42 |
65 - 75 |
6.5 - 7.5 |
46 - 52 |
8 |
|
|
|
|
|
29 - 36 |
51 - 64 |
5.1 - 6.4 |
36 - 45 |
7 |
|
|
|
|
|
23 - 28 |
40 - 50 |
4.0 - 5.0 |
28 - 35 |
6 |
|
|
|
|
|
19 - 22 |
33 - 39 |
3.3 - 3.9 |
23 - 27 |
5 1) |
10 www.aeg.com
German de- |
French degrees |
mmol / l |
Clarke de- |
Water softener lev- |
grees (°dH) |
(°fH) |
|
grees |
el |
|
|
|
|
|
15 - 18 |
26 - 32 |
2.6 - 3.2 |
18 - 22 |
4 |
|
|
|
|
|
11 - 14 |
19 - 25 |
1.9 - 2.5 |
13 - 17 |
3 |
|
|
|
|
|
4 - 10 |
7 - 18 |
0.7 - 1.8 |
5 - 12 |
2 |
|
|
|
|
|
<4 |
<7 |
<0.7 |
< 5 |
1 2) |
1)Factory setting.
2)Do not use salt at this level.
Regardless of the type of detergent used, set the proper water hardness level to keep the salt refill indicator active.
Multi-tabs containing salt are not effective enough to soften hard water.
Make sure the appliance is in user mode.
1.Press .
•The indicators , , and
are off.
•The indicator still flashes.
•The display shows the current setting: e.g. = level 5.
2.Press repeatedly to change the setting.
3.Press on/off to confirm the setting.
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase.
When the rinse aid chamber is empty, the rinse aid indicator is turned on notifying to refill rinse aid. If the drying results are satisfactory while using multitablets only, it is possible to deactivate the notification for refilling rinse aid. However, for best drying performance, always use rinse aid.
If standard detergent or multi-tablets without rinse aid are used, activate the notification to keep the rinse aid refill indicator active.
Make sure the appliance is in user mode.
1.Press .
•The indicators , , and are off.
•The indicator still flashes.
•The display shows the current setting.
– = the rinse aid empty notification is deactivated.
– = the rinse aid empty notification is activated.
2.Press to change the setting.
3.Press on/off to confirm the setting.
It is possible to set the released quantity of rinse aid between level 1 (minimum quantity) and level 6 (maximum quantity). Level 0 deactivates the rinse aid dispenser and no rinse aid is released.
Factory setting: level 4.
Make sure the appliance is in user mode.
1.Press .
•The indicators , , and are off.
•The indicator continues to flash.
•The display shows the current setting: e.g. = level 4.
–The levels of rinse aid range from 0A to 6A where level 0A means rinse aid is not used.
2.Press repeatedly to change the setting.
3.Press on/off to confirm the setting.
Acoustic signals sound when a malfunction of the appliance occurs. It is not possible to deactivate these acoustic signals.
There is also an acoustic signal that sounds when the programme is completed. By default this acoustic signal is deactivated but it is possible to activate it.
Make sure the appliance is in user mode.
1.Press .
•The indicators , , and are off.
•The indicator still flashes.
•The display shows the current setting.
– = the acoustic signal is deactivated.
– = the acoustic signal is activated.
2.Press to change the setting.
3.Press on/off to confirm the setting.
AirDry improves the drying results with less energy consumption.
ENGLISH |
11 |
During the drying phase, the door opens automatically and remains ajar.
CAUTION!
Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. If, afterwards, the door is closed for another 3 minutes, the running programme ends.
AirDry is automatically activated with all
programmes excluding (if applicable).
To improve the drying performance refer to the XtraDry option or activate AirDry.
CAUTION!
If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger.
Make sure the appliance is in user mode.
1.Press .
•The indicators , , and are off.
•The indicator still flashes.
•The display shows the current setting.
– = AirDry is deactivated.
– = AirDry is activated.
2.Press to change the setting.
12www.aeg.com
3.Press on/off to confirm the setting.
Desired options must be activated every time before you start a programme.
It is not possible to activate or deactivate options while a programme is running.
Not all options are compatible with each other. If you select non compatible options, the appliance automatically deactivates one or more of them. Only the indicators of the still active options are on.
If an option is not applicable to a programme, the related indicator is off or it flashes quickly for a few seconds and then goes out.
Activating options can affect the water and energy consumption as well as the programme duration.
Activate this option to boost the drying performance.
XtraDry is a permanent option for all
programmes other than . It is automatically activated in next cycles. This configuration can be changed at any time.
Every time is activated, XtraDry is off and needs to be chosen manually.
Activating XtraDry deactivates TimeSaver and vice versa.
1.Make sure that the current level of the water softener agrees with the hardness of the water supply. If
Press .
The related indicator is on. The display shows the updated programme duration.
The TimeSaver allows to reduce the duration of a selected programme by approximately 50%.
The washing results are the same as with the normal programme duration. The drying results can decrease.
This option increases the pressure and the temperature of the water. The washing and the drying phases are shorter.
By default, TimeSaver is off, but it is possible to activate it manually. This option cannot be combined with XtraDry.
Press .
The related indicator is on. The display shows the updated programme duration.
This option provides better hygiene results by keeping the temperature at 70 °C for at least 10 minutes during the last rinsing phase.
Press .
The related indicator is on. The display shows the updated programme duration.
not, adjust the level of the water
softener.
2. Fill the salt container.
3.Fill the rinse aid dispenser.
4.Open the water tap.
5.Start a programme to remove any processing residuals that can still be inside the appliance. Do not use detergent and do not put dishes in
the baskets.
After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. The washing phase starts only after this procedure is complete. The procedure is repeated periodically.
CAUTION!
Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion.
The salt is used to recharge the resin in the water softener and to assure good washing results in daily use.
1.Turn the cap of the salt container counterclockwise and remove it.
2.Put 1 litre of water in the salt container (only for the first time).
3.Fill the salt container with dishwasher salt (until it is full).
4.Carefully shake the funnel by its handle to get the last granules inside.
5.Remove the salt around the opening of the salt container.
ENGLISH 13
6.Turn the cap of the salt container clockwise to close the salt container.
CAUTION!
Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start the shortest programme to prevent corrosion. Do not put dishes in the baskets.
A |
B |
|
C |
CAUTION!
Only use rinse aid designed specifically for dishwashers.
1.Open the lid (C).
2.Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''.
3.Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.
4.Close the lid. Make sure that the lid locks into position.
14 www.aeg.com
Fill the rinse aid dispenser when the indicator (A) is clear.
1.Open the water tap.
2.Press the on/off button to activate the appliance.
Make sure that the appliance is in programme selection mode.
•If the salt indicator is on, fill the salt container.
•If the rinse aid indicator is on, fill the rinse aid dispenser.
3.Load the baskets.
4.Add the detergent.
5.Set and start a programme suitable for the type of load and the degree of soil.
A |
B |
|
C |
CAUTION!
Only use detergent specifically designed for dishwashers.
1.Press the release button (A) to open the lid (C).
2.Put the detergent, in powder or tablets, in the compartment (B).
3.If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door.
4.Close the lid. Make sure that the lid locks into position.
1.Keep the appliance door ajar.
2.Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode.
3.Press repeatedly until the display shows the number of the chosen programme. The display shows the programme number for approximately 3 seconds and then shows the programme duration.
4.Set the applicable options.
5.Close the appliance door to start the programme.
1.Set a programme.
2.Press repeatedly until the display shows the desired delay time (from 1 to 24 hours).
The indicator |
is on. |
3.Close the appliance door to start the countdown.
During the countdown, it is possible to increase the delay time but not to change the programme and options.
When the countdown is completed, the programme starts.
Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption.
If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry function.
When you cancel the delay start you have to set the programme and options again.
Press and hold RESET until the appliance is in programme selection mode.
Press and hold RESET until the appliance is in programme selection mode.
Make sure that there is detergent in the detergent dispenser before you start a new programme.
ENGLISH 15
All buttons are inactive except for the on/off button.
1.Press the on/off button or wait for the Auto Off function to automatically deactivate the appliance.
If you open the door before the activation of Auto Off, the appliance is automatically deactivated.
2.Close the water tap.
This function decreases energy consumption by deactivating automatically the appliance when it is not operating.
The function comes into operation:
•5 minutes after the completion of the programme.
•After 5 minutes if the programme has not started.
When the programme is complete, the
display shows 0:00. The indicator is on.
Follow the hints below to ensure optimal cleaning and drying results in daily use and to help you protect the environment.
•Remove larger residues of food from the dishes into the waste bin.
•Do not pre-rinse dishes by hand. When needed, select a programme with a prewash phase.
•Always use the whole space of the baskets.
•Make sure that items in the baskets do not touch or cover each other. Only then can the water completely reach and wash the dishes.
•You can use dishwasher detergent, rinse aid and salt separately or you can use the multi-tablets (e.g. ''All in 1''). Follow the instructions on the packaging.
•Select a programme according to the type of load and the degree of soil.
offers the most efficient use of water and energy consumption.
•Only use salt, rinse aid and detergent for dishwasher. Other products can cause damage to the appliance.
•In areas with hard and very hard water we recommend to use plain dishwasher detergent (powder, gel, tablets containing no additional agents), rinse aid and salt separately for optimal cleaning and drying results.
•At least once a month run the appliance with the use of appliance
16 www.aeg.com
cleaner which is particularly suitable for this purpose.
•Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use the tablets with long programmes.
•Do not use more than the correct quantity of detergent. Refer to the instructions on the detergent packaging.
Before you start to use separately detergent, salt and rinse aid, complete the following steps:
1.Set the highest level of the water softener.
2.Make sure that the salt and rinse aid containers are full.
3.Start the shortest programme with a rinsing phase. Do not add detergent and do not load the baskets.
4.When the programme is completed, adjust the water softener according to the water hardness in your area.
5.Adjust the released quantity of rinse aid.
6.Activate the rinse aid empty notification.
•Use the appliance to wash dishwasher-safe items only.
•Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper.
•Do not wash in the appliance items that can absorb water (sponges, household cloths).
•Remove large food residues from dishes.
•Soak cookware with burnt-on food before washing it in the appliance.
•Put hollow items (cups, glasses and pans) with the opening facing downwards.
•Make sure that glasses do not touch each other.
•Put light items in the upper basket. Make sure that the items do not move freely.
•Put cutlery and small items in the cutlery basket.
•Make sure that the spray arms can move freely before you start a programme.
Before you start the selected programme, make sure that:
•The filters are clean and correctly installed.
•The cap of the salt container is tight.
•The spray arms are not clogged.
•There is enough salt and rinse aid (unless you use multi-tablets).
•The arrangement of the items in the baskets is correct.
•The programme is suitable to the type of load and the degree of soil.
•The correct quantity of detergent is used.
1.Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged.
2.First remove items from the lower basket, then from the upper basket.
After the programme is completed, water can still remain on the inside surfaces of the appliance.