How it Works
AEG
Loading...
FSE83617P
User manual
56 pgs1.77 Mb0
User manual
60 pgs1.79 Mb0
Table of contents
Loading...

AEG FSE83617P User manual

USER MANUAL
FSE83617P
EN User Manual 2
Dishwasher
FR Notice d'utilisation 26
Lave-vaisselle
www.aeg.com
2

CONTENTS

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler - features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.

SAFETY INFORMATION

1.
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or
ENGLISH
damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
• Children of less than 3 years of age should be kept
away from the appliance unless continuously supervised.
• Do not let children play with the appliance.
• Keep detergents away from children.
• Keep children and pets away from the appliance when
the door is open.
• Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
3

General Safety

1.2
• This appliance is intended to be used in household
and similar applications such as:
– farm houses; staff kitchen areas in shops, offices
and other working environments;
– by clients in hotels, motels, bed & breakfast and
other residential type environments.
• Do not change the specification of this appliance.
• The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa)
• Follow the maximum number of 13 place settings.
4
www.aeg.com
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
• Put the cutlery in the cutlery basket with the sharp
ends pointing down or put them in the cutlery drawer
in a horizontal position with the sharp edges down.
• Do not leave the appliance with the open door
unattended to avoid stepping accidentally onto it.
• Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
• Do not use high pressure water sprays and/or steam
to clean the appliance.
• If the appliance has ventilation openings in the base,
they must not be covered e.g. by a carpet.
• The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in the built-in structure due to safety manner.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Do not install or use the appliance where the temperature is less than 0 °C.
• Install the appliance in a safe and suitable place that meets installation requirements.

2.2 Electrical connection

WARNING!
Risk of fire and electric shock.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
ENGLISH
5
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• This appliance is fitted with a 13 A mains plug. If it is necessary to change the mains plug fuse, use only a 13 A ASTA (BS 1362) fuse (UK and Ireland only).

2.3 Water connection

• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
• Ensure that there are no visible water leaks during and after the first use of the appliance.
• The water inlet hose has a safety valve and a sheath with an inner mains cable.
• Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging.
• Do not drink and play with the water in the appliance.
• Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the dishes.
• Do not sit or stand on the open door of the appliance.
• The appliance can release hot steam if you open the door while a programme operates.

2.5 Internal lighting

WARNING!
Risk of injury.
• This appliance has an internal lamp that comes on when you open the door and goes off when the door is closed.
• The type of lamp used for this appliance is for household appliances only. Do not use it for house lighting.
• To replace the internal lighting, contact the Authorised Service Centre.
WARNING!
Dangerous voltage.
• If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose.

2.4 Use

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

2.6 Service

• To repair the appliance contact the Authorised Service Centre.
• Use original spare parts only.

2.7 Disposal

WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
5
4
67
9
8
12
2
3
1
11 10
1 2 3
4 5 6
www.aeg.com6

3. PRODUCT DESCRIPTION

Ceiling spray arm
1
Upper spray arm
2
Lower spray arm
3
Filters
4
Rating plate
5
Salt container
6
Air vent
7

4. CONTROL PANEL

On/Off button
1
Delay Start button
2
Display
3
MY TIME selection bar
4
Rinse aid dispenser
8
Detergent dispenser
9
Cutlery basket
10
Lower basket
11
Upper basket
12
EXTRAS buttons
5
AUTO Sense button
6
CA B D E
ENGLISH 7

4.1 Display

The display shows the following information:
• ECOMETER
• Indicators
• Programme names and durations
• Delay start time
• Information texts

4.2 ECOMETER

4.3 Indicators

Indicator Description
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before first use".
Salt indicator. It is on when the salt container needs refilling. Refer to "Be- fore first use".
Machine Care indicator. It is on when the appliance needs internal clean­ing with the Machine Care programme. Refer to "Care and cleaning".
Drying phase indicator. It is on when a programme with the drying phase is selected. It flashes when the drying phase operates. Refer to "Pro- gramme selection".
Delay Start indicator. It is on when you set the delay start. Refer to "Daily use".
Pause indicator. It flashes when you pause a wash cycle or the delay count­down by opening the appliance door. Refer to "Daily use".
Alert indicators. They are on when a malfunction of the appliance occurs. Refer to "Troubleshooting".
The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is.
indicates the most environmentally friendly programme selection for a normally soiled load.

5. PROGRAMME SELECTION

5.1 MY TIME

Using MY TIME selection bar, you can select a suitable wash cycle based on programme duration, ranging from 30 minutes to four hours.
www.aeg.com8
A. Quick is the shortest programme
(30min) suitable for washing a load with fresh and light soil.
B. 1h is a programme suitable for
washing a load with fresh and lightly dried-on soil.
C. 1h 30min is a programme suitable
for washing and drying normally soiled items.
D. 2h 40min is a programme suitable
for washing and drying heavily soiled items.
E. ECO is the longest programme (4h)
offering the most efficient use of energy and water consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes.
5.2 EXTRAS
You can adjust the programme selection to your needs by activating EXTRAS.

SprayZone

SprayZone improves the washing results by increasing the pressure and temperature of the water as well as wash time. The option operates within the designated area in the lower basket. SprayZone is suitable for washing items with stubborn soil, e.g. pots, pans and casserole dishes.
CAUTION!
Make sure that the items placed in the SprayZone area do not block the upper spray arm.

ExtraPower

ExtraPower improves the washing results of the selected programme. The option increases the wash temperature and duration.

GlassCare

GlassCare provides special care for a delicate load. The option prevents rapid changes in the wash temperature of the selected programme and reduces it to 45 °C. This protects glassware in particular from damaging.

5.3 AUTO Sense

The AUTO Sense program automatically adjusts the wash cycle to the type of load.
The appliance senses the degree of soil and the amount of dishes in the baskets. It adjusts the temperature and quantity of water as well as the wash duration.

5.4 Programmes overview

Pro­gramme
Quick • Crockery
1h • Crockery
1h 30min • Crockery
Type of load Degree of
soil
• Fresh • Wash 50 °C
• Cutlery
• Fresh
• Cutlery
• Cutlery
• Pots
• Pans
• Lightly dried-on
• Normal
• Lightly dried-on
Programme phases EXTRAS
• ExtraPower
• Intermediate rinse
• Final rinse 45 °C
• AirDry
• Wash 60 °C
• Intermediate rinse
• Final rinse 50 °C
• AirDry
• Wash 60 °C
• Intermediate rinse
• Final rinse 55 °C
• Drying
• AirDry
• GlassCare
• SprayZone
• ExtraPower
• GlassCare
• SprayZone
• ExtraPower
• GlassCare
• SprayZone
ENGLISH 9
Pro­gramme
2h 40min • Crockery
ECO • Crockery
AUTO Sense
Machine Care
Type of load Degree of
• Cutlery
• Pots
• Pans
• Cutlery
• Pots
• Pans
• Crockery
• Cutlery
• Pots
• Pans
• No load The pro-

Consumption values

soil
• Normal to heavy
• Dried-on
• Normal
• Lightly dried-on
The pro­gramme ad­justs to all de­grees of soil.
gramme cleans the ap­pliance interi­or.
Programme phases EXTRAS
• Prewash
• Wash 60 °C
• Intermediate rinse
• Final rinse 60 °C
• Drying
• AirDry
• Prewash
• Wash 50 °C
• Intermediate rinse
• Final rinse 55 °C
• Drying
• AirDry
• Prewash
• Wash 50 - 60 °C
• Intermediate rinse
• Final rinse 60 °C
• Drying
• AirDry
• Wash 70 °C
• Intermediate rinse
• Final rinse
• AirDry
• ExtraPower
• GlassCare
• SprayZone
• ExtraPower
• GlassCare
• SprayZone
EXTRAS are not ap­plicable to this pro­gramme.
EXTRAS are not ap­plicable to this pro­gramme.
Programme
Quick 9.3 - 11.4 0.54 - 0.66 30
1h 10.6 - 12.9 0.80 - 0.93 60
1h 30min 10.4 - 12.7 0.97 - 1.10 90
2h 40min 10.8 - 13.2 0.97 - 1.11 160
ECO 10.5 0.821 240
AUTO Sense 9.6 - 13.1 0.74 - 1.06 120 - 170
Machine Care 8.9 - 10.9 0.58 - 0.70 60
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
1)

Information for test institutes

To receive the necessary information for conducting performance tests (e.g. according to EN60436), send an email to:
Water (l) Energy (kWh) Duration (min)
info.test@dishwasher-production.com
In your request please include the product number code (PNC) found on the rating plate.
www.aeg.com10
For any other questions regarding your dishwasher please refer to the service book provided with your appliance.

6. BASIC SETTINGS

You can configure the appliance by changing basic settings according to your needs.
Settings Values Description
Water hardness From level 1 to level
10 (default: 5)
Rinse aid level From level 0 to level
6 (default: 4)
End sound ON
OFF (default)
Auto door open ON (default)
OFF
Key tones ON (default)
OFF
Latest prog. selec­tion
Display on floor ON (default)
Brightness From level 0 to level9Adjust the brightness of the display.
ON OFF (default)
OFF
Adjust the level of the water softener accord­ing to the water hardness in your area.
Adjust the level of the rinse aid according to the necessary dosage.
Activate or deactivate the acoustic signal for the end of a programme.
Activate or deactivate AirDry.
Activate or deactivate the sound of the but­tons when pressed.
Enable or disable the automatic selection of the most recently used programme and op-
1)
tions.
Activate or deactivate TimeBeam.
1)
1)
1)
1)
1)
Language List of languages
(default: English)
Reset settings YES
PNC number Number
1)
For more details, refer to the information provided in this chapter.
NO

6.1 The water softener

The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance.
Set the preferred language.
Reset the appliance to the factory settings.
Check the PNC number of your appliance.
The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales.
The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is important to set the
1)
ENGLISH 11
right level of the water softener to assure good washing results.
Softening hard water increases the consumption of water and energy as well as the programme duration. The higher the level of water softener, the higher the consumption and the longer the duration.
Water hardness
German de-
grees (°dH)
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1)
Factory setting.
2)
Do not use salt at this level.
French degrees
(°fH)
mmol / l Clarke de-
grees
Water softener lev-
el
1)
5
2)
1
Regardless of the type of detergent used, set the proper water hardness level to keep the salt refill indicator active.
Multi-tabs containing salt are not effective enough to soften hard water.

6.2 Rinse aid level

The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. It is possible to set the released quantity of rinse aid.
When the rinse aid dispenser is empty, the display shows the indicator and
Rinse aid low. If the drying results are satisfactory while using multi-tablets
only, it is possible to deactivate the dispenser and the refill notification. However, for best drying performance, always use rinse aid and keep the notification active.
To deactivate the rinse aid dispenser and the notification, set the rinse aid level to
0.

6.3 End sound

You can activate an acoustic signal that sounds when the programme is completed.
Acoustic signals sound also when a malfunction of the appliance occurs. It is not possible to deactivate these signals.
12
www.aeg.com

6.4 AirDry

AirDry improves the drying results. The appliance door opens automatically during the drying phase and remains ajar.
AirDry is automatically activated with all programmes.
CAUTION!
Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance.
CAUTION!
If children have access to the appliance, we advise to deactivate AirDry. The automatic opening of the door may pose a danger.

6.5 Latest programme selection

You can set the automatic selection of the most recently used programme and options.
The latest programme that was completed before the appliance deactivation is saved. It is then selected automatically after you activate the appliance.
When the latest programme selection is disabled, the default programme is ECO.

6.6 TimeBeam

TimeBeam displays the following information on the floor below the appliance door:
• The programme duration when the programme begins.
• 0:00 and CLEAN when the programme is completed.
• DELAY and the countdown duration when the delay start begins.
• An alarm code when the appliance has a malfunction.
When AirDry opens the door, TimeBeam is off. To check the remaining time of the running programme, look at the control panel display.

6.7 PNC number

If you contact an Authorised Service Centre, you need to provide the product number code (PNC number) of your appliance.
The number can be found on the rating plate on the appliance door. You can also check the number on the display. Select PNC number from the setting list to check the number.

6.8 Setting mode

How to navigate in setting mode

You can navigate in setting mode using MY TIME selection bar.
BA C
A. Previous button B. OK button C. Next button
Use Previous and Next to switch between the basic settings and to change their value.
Use OK to enter the selected setting and to confirm changing its value.

How to enter setting mode

You can enter setting mode before starting a programme. You cannot enter setting mode while the programme is running.
To enter setting mode, press and hold simultaneously and for
about 3 seconds.
• The lights related to the Previous,
OK and Next are on.
ENGLISH
• The display shows the first available setting and its current value.

How to change a setting

Make sure the appliance is in setting mode.
1. Use Previous or Next to select the
desired setting. The display shows the setting name and its current value.
2. Press OK to enter the setting. The display shows available values.
3. Press Previous or Next to change
the value.
4. Press OK to confirm the setting.
• The new setting is saved.
• The appliance returns to the basic settings list.
5. Press and hold simultaneously
and for about 3
seconds to exit setting mode. The appliance returns to the programme selection. The saved settings remain valid until you change them again.
13

7. BEFORE FIRST USE

1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start the programme Quick to
remove any residuals from the manufacturing process. Do not use detergent and do not put dishes in the baskets.
After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. The washing phase starts only after this procedure is complete. The procedure is repeated periodically.

7.1 The salt container

CAUTION!
Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion.
The salt is used to recharge the resin in the water softener and to assure good washing results in daily use.

How to fill the salt container

Turn the cap of the salt container
1.
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with dishwasher
salt (until it is full).
A
B
C
www.aeg.com14
4. Carefully shake the funnel by its
handle to get the last granules inside.
5. Remove the salt around the opening
of the salt container.

7.2 How to fill the rinse aid dispenser

CAUTION!
Only use rinse aid designed specifically for dishwashers.
6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start the shortest programme to prevent corrosion. Do not put dishes in the baskets.

8. DAILY USE

1. Open the water tap.
2. Press and hold until the appliance
is activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the
empty.
programme is complete.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser when the indicator (A) is clear.
A
B
C
ENGLISH
15

8.1 Using the detergent

CAUTION!
Only use detergent specifically designed for dishwashers.
1.
Press the release button (A) to open the lid (C).
2. Put the detergent, in powder or tablets, in the compartment (B).
3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door.
4. Close the lid. Make sure that the lid locks into position.
8.2 How to select and start a
programme using MY TIME selection bar
1. Slide your finger across MY TIME selection bar to choose a suitable programme.
• The light related to the selected
programme is on.
• The ECOMETER indicates the
level of energy and water consumption.
• The display shows the
programme duration.
2. Activate applicable EXTRAS if desired.
3. Close the appliance door to start the programme.
2. Press the button dedicated to the
option you want to activate.
• The light related to the button is on.
• The display shows the updated programme duration.
• The ECOMETER indicates the updated level of energy and water consumption.
By default, options must be activated every time before you start a programme. If the latest programme selection is enabled, the saved options are activated automatically along with the programme.
It is not possible to activate or deactivate options while a programme is running.
Not all options are compatible with each other.
Activating options often increases the water and energy consumption as well as the programme duration.

8.4 How to start the AUTO Sense program

1. Press .
• The light related to the button is on.
• The display shows the longest possible program duration.
MY TIME and EXTRAS are not applicable to this program.
2. Close the appliance door to start the
program. The appliance senses the type of load and adjusts a suitable wash cycle. During the cycle, the sensors operate several times and the initial program duration can decrease.
8.3 How to activate EXTRAS
1. Select a programme using MY TIME
selection bar.

8.5 How to delay the start of a programme

1. Select a programme.
16
www.aeg.com
2. Press repeatedly until the display
shows the desired delay time (from 1 to 24 hours).
The light related to the button is on.
3. Close the appliance door to start the
countdown. During the countdown, it is not possible to change the delay time and the programme selection.
When the countdown is complete, the programme starts.

8.6 Opening the door while the appliance operates

Opening the door while a programme is running pauses the wash cycle. The display shows the remaining duration of the programme. The programme bar at the bottom of the display indicates the current progress of the wash cycle. The length of the bar decreases along with the programme duration.
If you open the door while the delay start countdown operates, the countdown is paused. The display shows the current countdown status.
After closing the door, the appliance continues from the point of interruption.
Opening the door while the appliance operates may affect the energy consumption and the programme duration.
If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by the AirDry function.
Press and hold for about 3 seconds. The appliance returns to the programme selection.
If you cancel the delay start, you have to select the programme again.

8.8 How to cancel a running programme

Press and hold for about 3 seconds. The appliance returns to the programme selection.
Make sure that there is detergent in the detergent dispenser before you start a new programme.

8.9 The Auto Off function

This function saves energy by switching the appliance off when it is not operating.
The function comes into operation automatically:
• When the programme is completed.
• After 5 minutes if a programme was not started.

8.10 End of the programme

When the programme is complete, the display shows Dishes clean.
The Auto Off function switches the appliance off automatically.
All buttons are inactive except for the on/off button.

8.7 How to cancel the delay start while the countdown operates

9. HINTS AND TIPS

ENGLISH
17

9.1 General

Follow the hints below to ensure optimal cleaning and drying results in daily use and to help you protect the environment.
• Remove larger residues of food from the dishes into the waste bin.
• Do not pre-rinse dishes by hand. When needed, select a programme with a prewash phase.
• Always use the whole space of the baskets.
• Make sure that items in the baskets do not touch or cover each other. Only then can the water completely reach and wash the dishes.
• You can use dishwasher detergent, rinse aid and salt separately or you can use the multi-tablets (e.g. ''All in 1''). Follow the instructions on the packaging.
• Select a programme according to the type of load and the degree of soil. ECO offers the most efficient use of water and energy consumption.
9.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent designed for dishwasher. Other products can cause damage to the appliance.
• In areas with hard and very hard water, we recommend to use basic dishwasher detergent (powder, gel, tablets containing no additional agents), rinse aid and salt separately for optimal cleaning and drying results.
• Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use tablets with long programmes.
• Do not use more than the correct quantity of detergent. Refer to the instructions on the detergent packaging.

9.3 What to do if you want to stop using multi-tablets

Before you start using separately detergent, salt and rinse aid, complete the following steps:
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the Quick programme. Do not
add detergent and do not put dishes in the baskets.
4. When the programme is completed,
adjust the water softener according to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.

9.4 Before starting a programme

Before you start the selected programme, make sure that:
• The filters are clean and correctly installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid (unless you use multi-tablets).
• The arrangement of the items in the baskets is correct.
• The programme is suitable to the type of load and the degree of soil.
• The correct quantity of detergent is used.

9.5 Loading the baskets

• Use the appliance to wash dishwasher-safe items only.
• Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper.
• Do not wash in the appliance items that can absorb water (sponges, household cloths).
• Remove large food residues from dishes.
• Soak cookware with burnt-on food before washing it in the appliance.
Loading...
+ 39 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use