AEG ESL6100 User Manual

D i s h w a s h e r

Model ESL 6100

AUS

Contents

Important safety information

3

Installation instructions

13

Description of the appliance

4

Water supply connections

13

Water outlet hose connection

14

The control panel

4

Electrical connection

14

 

 

Before use

5

Hints for test centres

15

Setting the water softener

5

 

 

Filling with salt

5

 

 

Rinse aid

6

 

 

Use of detergent

6

 

 

Using your appliance

7

 

 

Loading your appliance

7

 

 

The lower basket

7

 

 

The cutlery basket

7

 

 

The upper basket

7

 

 

Adjusting the height of the upper basket

7

 

 

Hints and tips

8

 

 

Washing programmes

9

 

 

Operating sequence

10

 

 

Maintenance and cleaning

11

 

 

Internal cleaning

11

 

 

Cleaning the filters

11

 

 

External cleaning

11

 

 

Prolonged periods of non-operation

11

 

 

Frost precautions

11

 

 

Moving the machine

11

 

 

Something not working

12

 

 

Service and spare parts

13

 

 

Protection against flooding

13

 

 

Technical specifications

Dimensions

Width

59.6 cm

 

Height with worktop

81.8 - 87.8 cm

 

Max depth

55.5 cm

 

Max depth with open door

111.4 cm

 

 

 

Electrical connection

Voltage

220 - 240 V - 50 Hz

Motor rating during wash

 

200 W

Power of heating element

 

2100 W

Overall power

 

2300 W

 

 

 

Water supply pressure

Minimum

50 kPa (0.5 bar)

 

Maximum

800 kPa (8 bar)

 

 

 

Capacity

 

12 place settings

 

 

 

This appliance complies with the following E.E.C. Directives:

-73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;

-89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

2

Important safety information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.

Installation

This appliance is heavy. Care should be taken when moving it.

It is dangerous to alter the specifications or attempt to modify this product in any way.

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

Any electrical work required to install this appliance should be carried out by a qualified electrician.

Any plumbing work required to install this appliance should be carried out by a qualified plumber.

It is the responsibility of the installer to ensure that the inlet and outlet hoses are not to be bent or obstructed when the machine is installed.

Child Safety

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

Keep all packaging well away from children.

Keep all detergents in a safe place out of children's reach.

Conservation

In the interest of the environment:

Materials marked with the symbol

are recyclable.

Check with your local Council or Environmental Health

Office to see if there are facilities in your area for re-cycling this appliance.

When the appliance is to be scrapped, cut off the power supply cable and make the door closing device unusable to prevent young children from being trapped inside.

Help to keep your country tidy - use authorised disposal sites for your old appliance.

Warning!

Dishwasher detergents are strongly alkaline, they can be extremely dangerous if swallowed.

Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle.

Check that the detergent receptacle is empty after completion of the wash cycle.

During Use

The appliance is not intended for use by infirm persons without supervision.

Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.

Under no circumstances should you open the door whilst

the appliance is in operation. Always turn off the appliance before opening the door.

Only use detergent specifically designed for use in dishwashers.

When finishing loading or unloading close the door, as an open door can be a hazard.

Do not sit or stand on the open door.

Isolate the appliance from the power supply and turn off the water supply after use.

Care should be taken when cleaning the bottom door seal and hinge area as any exposed metal edges may cut if care is not taken.

This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used.

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced or unauthorised persons may cause injury or serious malfunction. Contact your local Service Agent.

Always insist on genuine spare parts.

3

AEG ESL6100 User Manual

Description of the appliance

1.Water hardness adjustment

2.Levelling spacers

3.Upper basket stop

4.Salt container

5.Lower spray arm

6.Detergent dispenser

7.Control panel

8.Rating plate

9.Rinse aid dispenser

10.Large filter

11.Central filter

12.Upper spray arm

13.Upper basket

IN80

The control panel

In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open.

1.On/Off push button

2."BIO" push button

3.Programme guide

4.Programme marker

5.Programme selector dial

4

Before use

Before using your dishwasher for the first time:

1.Ensure that the electrical and water connections comply with the installation instructions

2.Remove all packaging from inside the appliance

3.Set the water softener

4.Pour 1 litre of water inside the salt container and then fill with salt

5.Fill the rinse aid dispenser

6.Run a Rinse and Hold programme.

Filling with salt

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the washing programmes.

This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

Setting the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these salts, the harder your water is. Water hardness is measured in PPM (parts per Million).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 2.

If this level is not suitable for your area the softener should be adjusted.

 

 

 

 

 

 

 

 

Water hardness

 

 

 

 

 

 

 

 

Level

 

PPM

Use of

 

 

(Parts per Million)

salt

 

 

 

 

0

0 - 80

 

NO

1

81 - 200

 

YES

2

201

- 400

 

YES

3

401

- 600

 

YES

4

601

- 800

 

YES

5

801 - 900

 

YES

 

 

 

 

 

 

If your water is level 0 it is already soft and therefore there is no need to use salt.

In this case adjust the water softener on level 1 without using salt.

To adjust the water softener

With a screwdriver turn the selector on the upper front corner of the machine until the level required corresponds with the marker.

3

4

22

5

1

AA05

 

To fill:

 

 

1. To fill with salt, unscrew the cap of the salt container.

 

2.

Pour 1 litre of water inside the container (this is necessary

 

 

only before filling with salt for the first time).

 

3.

Using the funnel provided,

 

 

 

pour in the salt until the

 

SALET

 

container is full.

 

SAL

 

 

SALZ

 

Do not worry if water over

 

SEL

 

 

 

 

flows from the unit when

 

 

 

filling with salt, this is quite

 

 

 

normal.

 

 

4. Replace the cap making

 

 

 

sure that there is no trace

 

 

 

of salt on the screw thread

SR06

 

 

 

 

 

or on the gasket.

 

 

5. Screw on the cap tightly.

The salt container will require topping up periodically.

The salt cap has a refill indicator window in the centre. A

green

float

is clearly visible when there is salt inside the container,

 

and almost disappears when the salt has finished reminding

 

you to add salt.

 

SR11

5

Loading...
+ 11 hidden pages