AEG EHD60100P User Manual

user manual

manual de instruções

manual de instrucciones

Induction Hob

Placa de indução

Placa de inducción

EHD60100P

2 electrolux

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety information 2 Installation instructions 3 Product description 5 Operating instructions 6 Helpful hints and tips 8

SAFETY INFORMATION

For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully know the operation and safety functions of the appliance.

Children and vulnerable people safety

Warning! Do not let persons, children

included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge to use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety.

• Keep all packaging away from children. There is the risk of suffocation or injury.

• Keep the children away from the appliance during and after the operation, until the appliance is cold.

Warning! Activate the child safety device to prevent small children and pets from an accidental activation of the appliance.

Safety during operation

• Remove all packaging, stickers and layers from the appliance before the first use.

• Set the cooking zones to "off" after each use.

• The risk of burns! Do not put the objects made of metal, for example cutlery or saucepan lids, on the surface that you cook. They can become hot.

Care and cleaning 9 What to do if… 10 Environment concerns 11 Warranty 11

Subject to change without notice

• The Users with an implanted pacemaker must keep their upper body minimum 30 cm from induction cooking zones that are activated.

Warning! Fire risk! Too hot fats and oils can occur with ignition very quickly.

Correct operation

• Always monitor the appliance during operation.

• The appliance is only for domestic use!

• Do not use the appliance as a work or a storage surface.

• Do not put or keep very flammable liquids and materials, easy fusible objects (made of plastic or aluminium) on or near the appliance.

• Be careful when you connect the appliance to the near sockets. Do not let the electricity bonds touch the appliance or hot cookware. Do not let the electricity bonds to tangle.

How to prevent a damage to the appliance.

• If the objects or cookware fall on the glass, the surface can be damaged.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can cause scratch of the glass. Do not move them on the surface.

• Do not let cookware boil dry to prevent the damage to cookware and glass .

• Do not use the cooking zones with empty cookware or without cookware.

• Do not put the aluminium foil on the appliance.

electrolux 3

• Make sure that the airflow space of 5 mm between the worktop and front of the unit below it stays opened.

INSTALLATION INSTRUCTIONS

Before the installation , note down the serial number (Ser. Nr.) from the rating plate. The rating plate of the

appliance is on its lower casing.

EHD 60100P

58 GAD DA AU

ELECTROLUX

220-240 V 50-60-Hz

The Safety Instructions

Warning! You must read these!

Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier. Only an authorised servicing technician can install, connect or repair this appliance. Use only original spare parts. Only use the built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards. Do not change the specifications or change this product. Risk of injury and damage to the appliance. Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)! Keep the minimum distances to other appliances and units! Install shock protection, for example install the drawers only with a protective floor directly below the appliance! Keep safe the cut surfaces of the worktop from moisture with a correct sealant! Seal the appliance to the work top with no space between with a correct sealant!

949 592 676 02

Induction 3,7 kW 6,6 kW

Warning! If there is a crack on the surface, disconnect power supply to prevent the electrical shock.

Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher or oven! Do not install the appliance adjacent to doors and below windows! If not, when you open the doors or windows they can push off hot cookware from the appliance.

Warning! Risk of injury from electrical current. Carefully obey the instructions for electrical connections.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Install correctly to give shock protection.

• Loose and incorrect plug and socket connections can make the terminal become too hot.

• A qualified electrician must install the connections in the clamps correctly.

• Use a strain relief clamp on cable.

• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or two phase connection.

• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or higher). Speak your local Service Centre.

The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm. You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.

4 electrolux

Assembly

min. 50 mm

min. 5 mm

min. 500 mm

min. 50 mm

R 5mm

490

560

600mm

min. 25 mm

min.

5 mm

20 mm

If you use a protection box (the additional accessory), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary.

min. 38 mm

min. 5 mm

PRODUCT DESCRIPTION

Cooking surface layout

1 2

145

210

120/180

145

1 Single cooking zone 1200 W 2 Double cooking zone 700/1700 W 3 Induction cooking zone 1400 W, with

Power function 2500 W (minimum cookware diameter - 125mm)

4 Control panel

5 Induction cooking zone 2300 W, with

the Power function 3700 W (minimum cookware diameter - 180mm)

electrolux 5

Control panel layout

5 4 6 72 3

811 10 9

Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which functions operate.

Sensor field Function

Heat setting display It shows the heat setting.

Timer indicators for the cooking zones It shows for which zone you set the time.

Timer display It shows the time in minutes.

It activates and deactivates the appliance.

It locks and unlocks the control panel.

It increases or decreases the heat setting.

It activates and deactivates the outer ring.

It increases or decreases the time.

It selects the cooking zone.

It activates the Power function.

6 electrolux

Sensor field Function

It activates and deactivates the STOP+GO function.

Heat setting displays

Display Description

The cooking zone is deactivated.

Residual heat indicator

Warning! The risk of burns from

residual heat!

The cooking zone operates.

The Keep Warm/STOP+GO function operates.

The Automatic Heat-up function operates.

The cookware is incorrect or too small, or there is no cookware on the cooking zone.

There is a malfunction.

A cooking zone is still hot (residual heat).

The Lock/Child Safety device operates.

The Power function operates.

The Automatic Switch-Off operates.

The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of the cookware.

OPERATING INSTRUCTIONS

Activation and deactivation

Touch tivate the appliance.

Automatic Switch Off

The function deactivates the appliance automatically if:

•

• You do not set the heat setting after you

• You spill something or put something on

The times of Automatic Switch Off

The heat setting

Touch Touch

for 1 second to activate or deac-

All cooking zones are deactivated (

activate the appliance.

the control panel for more than 10 seconds, (a pan, a cloth, etc.). The sound operates some time and the appliance

- - -

The cooking zone deacti-

vates after

6 hours 5 hours 4 hours 1.5 hours

to increase the heat setting. to decrease the heat setting. The

deactivates. Remove the object or clean the control panel.

• The appliance become too hot (e.g. when, a saucepan boils dry). Before you use the appliance again, the cooking zone must be cool.

• You use not correct cookware. The sym-

comes on and the cooking zone

bol deactivates automatically after 2 minutes.

• You do not deactivate a cooking zone or change the heat setting. After some time,

comes on and the appliance deacti-

vates. See the table.

display shows the heat setting. Touch and at the same time to deactivate the

cooking zone.

electrolux 7

Activation and deactivation of the outer ring

You can adjust the surface you cook to the dimension of the cookware. To activate the outer ring touch the sensor

. The indicator comes on.

field Do the procedure again to deactivate the outer ring. The indicator goes out.

Automatic Heat Up

8 7 6 5 4

3 2 1

123456789

You can get the necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the graphic), and then decreases to the necessary heat setting. To start the Automatic Heat Up function:

Touch Touch

. comes on in the display. again and again until

comes on in the display.

Immediately touch

again and again

until the necessary heat setting comes

Timer

Use the Count Down Timer to set how long the cooking zone operates for only this one time.

Set the Timer after the selection of the cooking zone.

You can set the heat setting before or after you set the timer.

•

To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on.

on. After 3 seconds comes on in the display.

To stop the function touch

Power function

The Power function makes more power available to the induction cooking zones. The Power function is activated for 10 minutes at most. After, that the induction cooking zone automatically sets back to highest heat setting. To activate, touch

comes on. To deactivate, touch or .

Power management

The power management divides the power between two cooking zones in a pair (see the illustration). The power function increases the power to the maximum level for one cooking zone in the pair. Automatically decreases the power in the second cooking zone to a lower level. The display for the reduced zone change between two levels.

• To activate or change the Timer: touch time (

or of the timer to set the

- 99 minutes). When the indi-

cator of the cooking zone starts to flash slow, the time counts down.

• To deactivate the Timer: set the cooking zone with

and touch to deactivate the Timer. The remaining time counts back to

. The indicator of the

cooking zone goes out.

• To see the remaining time: set the cooking zone with

. The indicator of

8 electrolux

the cooking zone starts to flash quickly. The display shows the remaining time.

When the time comes to an end, the sound operates and

deactivates.

•

To stop the sound: touch You can use the Timer as a minute mind- er while the cooking zones do not operate.

Touch When the time comes to an end, the sound

operates and

•

To stop the sound: touch

STOP+GO

The

function sets all cooking zones that operate to the lowest heat setting ( When heat setting. The function.

•

Lock

When the cooking zones operate, you can lock the control panel, but not

vents an accidental change of the heat setting.

To start this function touch

operates, you cannot change the

function does not stop the timer

To activate this function touch symbol To deactivate this function touch The heat setting that you set before

comes on.

comes on for 4 seconds.

flashes. The cooking zone

. Touch or to set the time.

flashes

. The

comes on.

. It pre-

. The symbol

HELPFUL HINTS AND TIPS

Use the induction cooking zones with correct cookware.

Cookware for induction cooking zones Important! For induction cooking zones a

strong electro-magnetic field creates the heat in the cookware very quickly.

Cookware material

• correct: cast iron, steel, enamelled steel,

stainless steel, the bottom made of multilayer (with correct mark from a manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

The Timer stays on. To stop this function touch

setting that you set before comes on. When you stop the appliance, you also stop this function.

The child safety device

This function prevents an accidental operation of the appliance.

To activate the child safety device

•

Activate the appliance with set the heat settings .

•

Touch comes on.

•

Deactivate the appliance with

To deactivate the child safety device

•

Activate the appliance with set the heat settings . Touch seconds. The symbol

•

Deactivate the appliance with

To override the child safety device for only one cooking time

•

Activate the appliance with bol

•

Touch setting in 10 seconds. You can operate the appliance.

• When you deactivate the appliance with

again.

Cookware is correct for an induction hob if …

• ... some water boils very quickly on a zone set to the highest heat setting..

• ... a magnet pulls on to the bottom of the cookware.

The noises during operation

If you can hear

• crack noise: cookware is made of different materials (Sandwich construction).

for 4 seconds. The symbol

comes on.

for 4 seconds. Set the heat

, the child safety device operates

The bottom of the cookwar must be as thick and flat as possible. Cookware dimensions : induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit.

. The heat

. Do not

for 4

comes on.

. The sym-

electrolux 9

• whistle sound: you use one or more cooking zones with high power levels and the cookware is made of different materials (Sandwich construction).

• humming: you use high power levels.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not refer to appliance malfunction.

Heat

setting

Keep warm the food you cooked as re-

1-2 Hollandaise sauce, melt: butter, choco-

1-2 Solidify: fluffy omelettes, baked eggs 10-40

2-3 Simmer rice and milkbased dishes,

3-4 Steam vegetables, fish, meat 20-45

4-5 Steam potatoes 20-60

4-5 Cook larger quantities of food, stews

6-7 Gentle fry: escalope, veal cordon bleu,

7-8 Heavy fry, hash browns, loin steaks,

9 Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips

late, gelatine

heating up ready-cooked meals

and soups

cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts

steaks

Use to: Time Hints

The Power function is best to heat up large quantities of water. The induction cooking zones are faster and more energy-efficient than traditional cooking surfaces.

Energy saving

• If it is possible, always put the lids on the cookware.

•Put cookware on a cooking zone before you start it.

The Examples of cooking applications

The data in the table is for guidance only.

quired 5-25

min

min 25-50

min

min 60-150

min as nec-

essary

5-15 min

Put a lid on a cookware

Mix from time to time

Cook with a lid on

Add the minimum twice as much liquid as rice, mix milk dishes part procedure through

Add some tablespoons of liquid

Use max. ¼ l water for 750 g of potatoes

Up to 3 l liquid plus ingredients

Turn halfway through

(specially the one which contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much.

Information on acrylamides Important! According to the newest

scientific knowledge, if you brown food

CARE AND CLEANING

Clean the appliance after each use. Always use cookware with clean bottom.

Warning! The sharp objects and abrasive cleaning agents can cause damage to the appliance.

For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners.

Scratches or dark stains on the glassceramic cause no effect on how the appliance operates.

10 electrolux

To remove the dirt:

1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance. Use a special scraper for the glass . Put the scraper on the glass surface at an acute angle and

rings, fat stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic or stainless steel.

2. Clean the appliance with a moist cloth and some detergent.

3. At the end rub the appliance dry with

a clean cloth.

move the blade on the surface .

Remove after the appliance is suf-

–

ficiently cool: limescale rings , water

WHAT TO DO IF…

Problem Possible cause and remedy

You cannot activate the appliance or operate it.

An acoustic signal sounds when the appliance is off.

An acoustic signal sounds 6 times and the appliance deactivates.

The residual heat indicator does not come on.

The automatic warm up function does not start.

An acoustic signal sounds. The appliance activates and deactivates again. After 5 seconds the acoustic signal sounds again.

The sensor fields become hot.

The display changes between 2 heat settings.

•

The key lock or child safety device operates "Lock" and "The Child safety device".

•

STOP+GO operates

• You touched 2 or more sensor fields at the same time. Only touch one sensor field.

• There is water or fat stains on the control panel. Clean the control panel.

• Start the appliance again and set the heat setting in less than 10 seconds.

You covered one or more sensor fields. Uncover the sensor fields.

The cooking zone is not hot because it operated only for a short time. If the cooking zone must be hot, speak to the Service Centre.

•

The cooking zone is still hot (residual heat down.

• The highest heat setting is set. The highest heat setting has the same power as the automatic warm up function.

You covered . Uncover the sensor field.

The cookware is too large or you put it too near the controls. Put large cookware on the rear cooking zones if necessary.

Power Management decreases the power of this cooking zone. Use cooking zones on the other side.

. Stop the function. See the section "Stop and go".

. Stop the function. Refer to

). Let the cooking zone cool

Problem Possible cause and remedy

comes on.

and a num-

ber come on.

and

come on.

come on

If you tried the above solutions and cannot repair the problem, speak to your dealer or the customer service. Give the data from the rating plate, three digit letter, code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on.

• The automatic switch-off operates. Deactivate the appliance and activate it again.

Overheating protection for the cooking zone operates. Deactivate the cooking zone and activate it again.

• The cookware is incorrect. Use the correct cookware.

• There is no cookware on the cooking zone. Put cookware on the cooking zone.

• The diameter of the bottom of the cookware is too small for the cooking zone. Use the correct cookware.

There is an error in the appliance. Disconnect the appliance from the electrical supply for some time. Disconnect

the fuse from the electrical system of the house. Connect again. If again, speak to the Service Centre.

Bright sunlight or other too strong light shines on the control panel. Shade the control panel for a short time, for example with a hand. An acoustic signal sounds and the appliance deactivates. Activate the appliance again.

The cookware boiled dry or you used incorrect cookware. Overheating protection for the cooking zone operates. The Automatic Switch-off operates. Deactivate the appliance. Remove the hot cookware. After approximately 30

seconds activate the cooking zone again. dicator can stay on. Cool down the cookware and make sure that it is correct for the appliance. Refer to the section "Cookware for the induction cooking zone".

Make sure, you operated the appliance correctly. If not the servicing by a customer service technician or dealer will not be free of charge, also during the warranty period. The instructions about the customer service and conditions of guarantee are in the guarantee booklet.

electrolux 11

comes on

disappears. The residual heat in-

ENVIRONMENT CONCERNS

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please

WARRANTY

contact your local council, your household waste disposal service or the shop where you purchased the product.

Packaging material

The packaging materials are friendly to the environment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as household waste at the waste disposal facilities in your municipality.

FOR SALES IN AUSTRALIA AND NEW ZEALAND

+ 25 hidden pages