Please read these user instructions carefully and keep them to refer to
later.
Please pass the user instructions on to any future owner of the appliance.
The following symbols are used in the text:
1Safety instructions
Warning! Information that affects your personal safety.
Important! Information that prevents damage to the appliance.
Please comply with these instructions. If you do not, any damage re-
3
sulting is not covered by the warranty.
5 This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and
frying of food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials
or fusible objects (e.g. plastic film, plastic, aluminium) on or near the
appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off
and disconnected from the electrical supply, to prevent the possibility
of an electric shock.
• Repairs to the appliance must only be carried out by trained registered service engineers.
4
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not touch the hot surface of
the appliance or hot cookware.
• Overheated fats and oils can ignite quickly. When cooking with fat or
oil (e.g. chips) do not leave the appliance unattended.
• Switch the cooking zones off after each use.
• Do not cover the oven’s steam outlet.
• When the oven is working, there is the danger of scalds from the
steam outlet.
• Users with implanted pacemakers should keep their upper body at
least 30 cm from induction cooking zones that are switched on.
• Risk of burns! Do not place objects made of metal, such as knives,
forks, spoons and saucepan lids on the cooking surface, as they can
get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or
high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by
the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass
ceramic and should be removed straightaway.
• Do not use the cooking zones with empty cookware or without cookware.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.
• The ventilation gap of 5mm between the worktop and front of the
unit underneath it must not be covered.
5
Description of the Appliance
Cooking surface layout
Induction cooking zone 1400 W
with power function 1800 W
Oven steam outlet
Induction cooking zone 1850 W
with power function 2500 W
Induction cooking zone 2300 W
with power function 3700 W
6
Digital display
Induction cooking
zone 1850 W
with power function 2500 W
Digital display
Display for
cooking zone rear left
Display for
cooking zone front left
Display for
cooking zone rear right
Display for
cooking zone front right
DisplayDescription
Cooking zone is switched off
Keep warm settingKeep warm setting is set
- Heat settingsHeat setting is set
- Heating setting plus
Intermediate heat setting is set
decimal point
Automatic warm up
function
Automatic warm-up function is
activated
Pan detectionCookware is unsuitable or too
small or no cookware has been
placed on the cooking zone
Residual heatCooking zone is still hot
PowerPower function is switched on
Safety cut-outSafety cut-out has been activated
7
Residual heat indicator
1Warning! Risk of burns from residual heat. After being switched off,
the cooking zones need some time to cool down. Look at the residual
heat indicator
.
3Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated
by the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of the electronics.
Operating the appliance
3
Use the induction cooking zones with suitable cookware.
Setting the heat setting
The heat can be set at 15 different levels (including intermediate settings) using the ring switches:
Intermediate settings are available between heat settings 2 to 7. These
are designated in the digital display with a decimal point.
Ring switchDisplay
To increaseturn clockwise to
To decreaseturn anti-clockwise to
To switch offset to zero /
3Please follow the instructions from the manufacturer of the combina-
tion appliance as well.
8
Switching the power function on and off
The power function makes more power available to the induction
cooking zones, e.g. to bring a large quantity of water to the boil quickly.
The power function is activated for 10 minutes. After that the induction cooking zone automatically switches back to heat setting 9.
Ring switchDisplay
To switch on 1. briefly turn clockwise as far as possible
2. turn anti-clockwise again to
To switch off turn anti-clockwise to /
Power Management
The cooking zones have a maximum
power available to them.
If this power range is exceeded by
switching on the power function,
Power Management reduces the
heat setting of another cooking
zone.
The indicator for this cooking zone
changes between the heat setting
set and maximum possible heat setting for one minute. Thereafter the
actual heat setting is displayed.
Example:
Last cooking
Other cooking zone
zone switched
on
set heat setting set heat
setting
indicatoractual heat
setting
p 9 7 alternating with 9 7
9
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function.
The automatic warm-up function sets the cooking zone to the highest
setting for a certain period of time and then automatically switches
back to the cooking setting that was originally set.
Ring switchDisplay
To switch on briefly turn clockwise as far as possible
turn anti-clockwise again and set the
required heat setting -
To switch off turn anti-clockwise and select a lower
• In the event of overheating (e.g. when a pan boils dry) the cooking
zone automatically switches itself off. is displayed. Before being
used again, the cooking zone must be set to
• If cookware that is not suitable is used, flashes for two minutes in
the cooking zone indicator. Then is displayed. Before being used
again, the cooking zone must be set to
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically. is displayed. Before being used again, the cooking zone must be set to 0.
Heat settingSwitches off after
0 and cooled down.
0.
V, 1 - 2
3 - 4
5
6 - 9
6 hours
5 hours
4 hours
1.5 hours
11
Tips on Cooking and Frying
Information on acrylamides
3
According to the latest scientific knowledge, intensive browning of
food, especially in products containing starch, can constitute a health
risk due to acrylamides. Therefore we recommend cooking at the lowest
possible temperatures and not browning foods too much.
Cookware for induction cooking zones
Cookware material
Cookware materialSuitable
Steel, enamelled steelyes
Cast ironyes
Stainless steelif appropriately labelled by the manufacturer
Aluminium, copper, brass--Glass, ceramic, porcelain---
3Cookware for induction cooking zones is labelled as suitable by the
manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
• ... a little water on an induction cooking zone set to heat setting 9 is
heated within a short time.
• ... a magnet sticks to the bottom of the cookware.
3Certain cookware can make noises when being used on induction cook-
ing zones. These noises are not a fault in the appliance and do not affect operation in any way.
Bottom of the cookware
The bottom of the cookware should be as thick and flat as possible.
12
Pan size
Induction cooking zones adapt automatically to the size of the bottom
of the cookware up to a certain limit. However the magnetic part of
the bottom of the cookware must have a minimum diameter depending
upon the size of the cooking zone.
Diameter of cooking zone
[mm]
210180
180145
145120
Minimum diameter of dish base
[mm]
3The cookware must be placed centrally on the cooking zone.
Tips on energy saving
2Place cookware on the cooking zone before it is switched on.
2If possible, always place a lid on the cookware.
13
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
Cooking-
setting
The power function is suitable for heating large quantities of liquid.
process
0 Off position
Keeping
V
1-2
2-3
3-4
4-5Boiling
6-7
7-8
9
food
warm
Melting
Solidi-
fying
Simmer-
ing on
low heat
Steaming
Braising
Gentle
Frying
Heavy
Frying
Boiling
Searing
Deep
frying
suitable for
Keeping cooked foods
warm
Hollandaise sauce,
melting butter, chocolate,
gelatine
Fluffy omelettes, baked
eggs
Simmering rice and milk-
based dishes
Heating up ready-cooked
meals
Steaming vegetables, fish
braising meat
Steaming potatoes20-60 mins.
Cooking larger quantities
of food, stews and soups
Frying escalopes, veal
cordon bleu, cutlets, ris-
soles, sausages, liver, roux,
eggs, pancakes, dough-
nuts
Hash browns, loin steaks,
steaks, Flädle (pancakes
for garnishing soup)
Boiling large quantities of water, cooking pasta, searing meat
(goulash, pot roast), deep frying chips
Cooking
time
as requiredCover
5-25 mins.Stir occasionally
10-40 mins.Cook with lid on
Add at least twice as
25-50 mins.
20-45 mins.
60-150
mins.
Steady
frying
5-15 mins.
per pan
much liquid as rice, stir
milk dishes part way
With vegetables add
only a little liquid (a
Use only a little liquid,
e. g.: max.
Up to 3 l liquid plus in-
Turn halfway through
Turn halfway through
Tips/Hints
through cooking
few tablespoons)
¼ l water
for 750 g potatoes
gredients
cooking
cooking
14
Cleaning and Care
Take care! Risk of burns from residual heat.
1
1Warning! Sharp objects and abrasive cleaning materials will damage
the appliance. Clean with water and washing up liquid.
1Warning! Residues from cleaning agents will damage the appliance.
Remove residues with water and washing up liquid.
Cleaning the appliance after each use
1.Wipe the appliance with a damp cloth and a little washing up liquid.
2.Rub the appliance dry using a clean cloth.
Removing deposits
1.Place a scraper on the glass ceramic surface at an angle.
2.Remove residues by sliding the blade over the surface.
3.Wipe the appliance with a damp cloth and a little washing up liquid.
4.Rub the appliance dry using a clean cloth.
Remove
Type of dirt
sugar, food containing sugaryes--plastics, tin foilyes--limescale and water rings---yes
fat splashes---yes
shiny metallic discolouration---yes
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops
imme-
diately
when the appliance has
cooled down
using
a scraper*
cleaner for glass ce-
ramic or stainless
steel*
3Remove stubborn residues with a cleaner for glass ceramic or stainless
steel.
3Scratches or dark stains on the glass ceramic that cannot be removed
do not however affect the functioning of the appliance.
15
What to do if …
ProblemPossible causeRemedy
The cooking zones are not
functioning.
The residual heat indicator
is not displaying anything
flashesUnsuitable cookwareUse suitable cookware
is litOverheating protection for
The combination appliance
is not switched on.
The desired heat setting is
not set.
The fuse in the house’s
electrical wiring (fuse box)
has been tripped.
Combination appliance
was connected to the electricity supply when the
cooking surface was installed.
The cooking zone was only
on for a short time and is
therefore not hot
No cookware on the cooking zone
The diameter of the bottom of the cookware is too
small for the cooking zone
the cooking zone has been
triggered
When switching on the
combination appliance, the
ring switch was not in the
Off position
Cooking zone without
cookware for longer than
two minutes
Switch on the appliance.
Set the heat setting.
Check the fuse.
If the fuses trip a number
of times, please call an authorised electrician.
Take fuse out and re-insert
(fuse box), or switch off
and on again
If the cooking zone is supposed to be hot, call the
Customer Service Department.
Place cookware on the
cooking zone
Move onto a smaller cooking zone
Use suitable cookware
Switch off cooking zone
Switch cooking zone on
again
Switch off cooking zone,
place cookware on cooking zone, switch cooking
zone on
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care Department.
16
1Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
3If the appliance has been wrongly operated, the visit from the customer
service technician or dealer may not take place free of charge, even
during the warranty period.
17
Disposal
Packaging material
2
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<,
etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities.
2Old appliance
The symbol
product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you
purchased the product.
W on the product or on its packaging indicates that this
18
Installation Instructions
Safety instructions
The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance
with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed.
Drawers may only be installed under the appliance with a protective
floor.
The cut surfaces of the worktop are to be protected against moisture using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
Do not use silicon sealant between the appliance and the work top.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened.
1Warning!
Risk of injury from electrical current.
• Before connecting up the hob, disconnect the combination appliance
from the mains.
• Observe electrical safety rules.
• Ensure anti-shock protection through correct installation by a qualified
electrician.
• Rated voltage of the combined appliances must match.
1Important!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can lead to
overheating of the plug.
• Fit plug and socket connections together properly.
A device must be provided in the electrical installation which allows the
appliance to be disconnected from the mains at all poles with a contact
opening width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw
type fuses are to be removed from the holder), earth leakage trips and
contactors.
Move the oven steam outlet pipe with a screwdriver to the centre of the
opening in the hob. Then put the outlet connection piece over the pipe.
1• Moving the panel ring under pressure can scratch the coated metal
surfaces.
19
Guarantee/Customer Service
Weitere Kundendienststellen im Ausland
In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden.
Further after-sales service agencies overseas
In these countries our AEG-Electrolux agents’ own guarantee conditions are applicable. Please obtain further details direct.
Autres agences étrangères assurant le service après-vente
Dans ces pays, les conditions de garantie des concessionnaires de la région sont valables. Vous pouvez les consulter sur place.
Otros puntos de Postventa en el extranjero
En estos países rigen las condiciones de nuestros representantes locales.
las cuales pueden ser consultadas allí mismo.
Ulteriori uffici del servizio tecnico assistenza clienti all’estero
In questi paesi sono valide le condizioni di garanzia dei partner locali.
Queste condizioni possono essere esaminante sul luogo.
Serviços de assistência técnica no estrangeiro
Nestes países são válidas as condições de garantia dos concessionários
locais, podendo aí ser consultadas.
További vevöszolgálati irodák külföldön
Ezekben az országokban a mi AEG-Electrolux vevöszolgálatainknál
saját jótállási feltételek alkalmazhatók. A további adatokat kérjük
közvetlenül szerezzék be.
20
Servisne službe
Na garancijskem listu boste našli seznam pooblašèenih servisnih
služb AEG-Electrolux.
U.A.E. Abu Dhabi
Universal Trading Company
P.O. Box 43 99
Tel.: 6335331
Service Center 6733974
Egypt
Middle East Commercial
Center
4 Salah El Dein St. - 2nd floor
Heliopolis, Kairo
Egypt
Tel.: 2024181719
Awad Badi Nahas Est
Shara Siteen
Jeddah 21463
Phone: 6646583
Alia Trading Co
Mecca Road
Riyadh 11491
Phone 4645977
21
Japan
Electrolux Japan Ltd.
Domestic Appliances
Department
Maruzen Showa Warehouse
Building
Tookai 4-5-12, Ota-ku
143-006 Tokyo
Tel.: 0120-13-7117
Fax: 03-3790-5257