Page 1
www.advantechwireless.com
C-Band Hub-mount
SSPA/ SSPB
60W to 250W
AWMA-3000C series
Features
Overview
The AWMA-C series are the outdoor solid-state power amplifiers
(SSPAs), operating in C-Band frequency range. The amplifier is an
integrated unit, complete with power supply and cooling system.
Intended for outdoor operation, the AWMA-3000C is weatherproof.
Built-in microprocessor controller provides the capability for serial
port interfaces (RS485, RS232) for remote monitoring and control.
Advantech’s SSPAs set the industry standard for linearity and
operating efficiency. Built-in design features and assembly methods
incorporated with efficient combining techniques result in the
trouble-free operation of the amplifier.
Application
The SSPAs are designed for C-Band satellite up-link applications.
They are mounted outdoors, near the hub of an antenna. The
AWMA-C series are available in output power from 20W to 1000W.
For higher power Advantech provides phase-combined systems.
Other SSPAs are available for operation at other satellite frequency
bands. With all the features of the AWMA-C, Advantech also offers a
built-in converter.
Redundancy
With the addition of the appropriate waveguide and switch kit, the
AWMA-3000C amplifiers can be easily converted for the operation
in 1:1 redundant configuration with full remote Monitor and Control
capability of the redundant system via serial interface. A single
Monitor and Control interface is required to manage redundant
system.
Options
Accessories
Table A
Output
(W)
CL
4.400 - 5.000
60 – 200
CP
6.425 - 6.725
60 – 200
CI
6.725 - 7.025
60 – 200
CR
5.725 - 6.025
60 – 250
CS
5.850 - 6.425
60 – 250
CX
5.850 - 6.725
60 – 150
Remote Monitor & Control
High gain and linearity
Output power up to 250W (see table A)
Gain adjustment
Output sample monitor port
Temperature gain compensation
Automatic over-temperature shutdown
Automatic high reflected power shutdown
Infinite VSWR protection
Field replaceable power supply
CE Marking
Band
*Other frequency sub-bands are available. Please consult
factory.
RF Band
(GHz)
Power
Integrated Block Up Converter
Additional harmonic filter
Extreme temperature operation
Redundant system
Redundancy Kit
Mounting Frames
Remote M&C panel (Ethernet port optional)
Page 2
C-Band Hub-mount SSPA/ SSPB
An ISO 9001 : 2008 Company
Ref.: PB-AWMA-C-60-250-11025
www.advantechwireless.com
Specifications are subject to change without prior notice
SOUTH AMERICA
EUROPE
NORTH AMERICA
Technical Specifications
60W
80W
100W
125W
150W
200W
250W
Electrical Characteristics
Availability in this series
CS, CR
√ √ √ √ √ √ √
CL,CP,CI,CX
√ √ √ √ √
Note 1
Note 1
Output power (P
SAT
)
+48 dBm
+49 dBm
+50 dBm
+51 dBm
+52 dBm
53 dBm
53 dBm
Output power (P1dB) min.
+47 dBm
+48 dBm
+49 dBm
+50 dBm
+51 dBm
52 dBm
53 dBm
Power gain @ maximum gain setting
56 dB min
60 dB min
65
65
Operating frequency range
See table A on front page
Max input power without damage
+10 dBm
Gain slope
0.6 dB max over 40 MHz
Gain flatness over 600 MHz
±1.0 dB max
Gain variation over temperature
±1.5 dB over full operating temperature range
Gain variation over 24 hours
±0.25 dB max at constant temperature & drive level
Gain adjustment range
20 dB min (0.1 dB resolution)
Input return loss
18 dB
Output return loss
19 dB
Noise power density
-70 dBm/Hz max in TX band
-150 dBm/Hz max in 3.4 –4.2 GHz RX band
Spurious at rated power
-65 dBc max
Harmonics at rated power
-60 dBc max
AM/PM conversion at rated power
2.5 /dB max (at P
1dB
),
1°/dB max. at 3 dB back-off
Third order IMD (2 tones 5 MHz apart)
-26 dBc max at 3 dB total back-off from rated P1dB
Group delay
Linear: 0.02 nsec/MHz max.
Ripple: 1.0 nsec p-p max.
Residual AM
0-10 kHz -45 dBc
500 kHz - 1 MHz -80 dBc
Power Requirements
AC input voltage
110/220 VAC auto ranging (47-63 Hz)
Power consumption (nominal)
490W
550W
630W
710W
800W
950W
1100
Mechanical Characteristics
Dimensions (L x W x H)
18.50” x 9.80” x 9.21” (46.99 x 24.89 x 23.39 cm)
Weight (with mounting frame)
32 kg (70 lbs)
Interfaces:
RF input Type N (Female)
Output sample port Type N (Female)
AC Line MS3102R16-10P
Redundancy MS3112E14-12P
Discrete port MS3112E16-26P
RS-485 MS3112E10-6P
RF output CPR137 contact
(for CL series - CPR187)
Environmental Conditions
Temperature Operating
Storage
-30 C to +55 C Option 1: -40 C to +55 C; option 2: -50 C to +50 C
-55 C to +85 C
Humidity
100%, condensing (2” rain/hour)
Altitude
10,000’ AMSL, derated 2°C/1,000’ from AMSL
Parabolic: 0.003 nsec/MHz2 max.
(F* - frequency in kHz)
10 kHz - 500 kHz -20 (1.25+log F*) dBc
Note 1: Please refer AWMA-4000C® product datasheet
USA
Tel: + 1 703 788-6882
Fax: +1 703 788-6511
[email protected]
CANADA
Tel: +1 514 420-0045
Fax: +1 514 420-0073
UNITED KINGDOM
Tel: +44 1480 357 600
Fax: +44 1480 357 601
[email protected]
RUSSIA & CIS
Tel: +7 495 967 1859
Fax: +7 495 967 30 24
BRAZIL
Tel: +55 11 3054 5701
Fax: +55 11 5041 4026
[email protected]
ARGENTINA
Tel: +54 11 4731 1034
Cel: +54 911 4492 5601
Loading...