Advantech PWS-8033M User Manual

User Manual

PWS-8033M

3.7" VGA TFT LCD XScale Ultra Rugged Mobile Computer

The documentation and the software included with this product are copyrighted 2009 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For outof-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2003803300 Edition 1

Printed in Taiwan April 2009

PWS-8033M User Manual ii

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the following information ready before you call:

– Product name and serial number – Description of your peripheral attachments – Description of your software (operating system, version, application software,

etc.)

– A complete description of the problem – The exact wording of any error messages

Warnings, Cautions and Notes

Follow these simple precautions to protect yourself from harm and the products from damage.

 To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive electronic components.

iii PWS-8033M User Manual

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

15. The power cord or plug is damaged.

16. Liquid has penetrated into the equipment.

17. The equipment has been exposed to moisture.

18. The equipment does not work well, or you cannot get it to work according to the

user's manual.

19. The equipment has been dropped and damaged.

20. The equipment has obvious signs of breakage.

21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.

22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

23. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.

PWS-8033M User Manual iv

Chapter 1 General Information ............................1

1.1 Introduction ............................................................................................... 2

1.1.1 Features & Specifications ............................................................. 2

1.1.2 Package Contents........................................................................ 3

1.1.3 Optional Accessories .................................................................... 3

1.2 Familiarizing Yourself with the PWS-8033M ............................................. 4

1.2.1 Front View..................................................................................... 4

1.2.2 Right View..................................................................................... 5

1.2.3 Bottom View.................................................................................. 6

1.2.4 Left View ....................................................................................... 6

1.2.5 Back View ..................................................................................... 7

1.2.6 Top View ....................................................................................... 7

1.3 4-In-1 Battery Charger (Optional) ............................................................. 8

1.4 Cradle (Optional)....................................................................................... 9

Chapter 2 Installation..........................................11

2.1 Getting Started ........................................................................................ 12

2.1.1 Installing the Battery ................................................................... 12

2.1.2 Charging the Battery ................................................................... 12

2.1.3 Charging the Battery with the Adapter Charger .......................... 13

2.1.4 Charging the Battery with the Cradle .......................................... 13

2.2 Powering up for the First Time ............................................................... 14

2.3 Calibrating the Touchscreen ................................................................... 14

2.4 Setting the Time and Date ...................................................................... 14

2.5 Adjusting the Screen Brightness ............................................................. 14

Chapter 3 Using the Hardware...........................15

3.1 Keypads and Function Buttons ............................................................... 16

3.1.1 Entering Characters with the Keypad ......................................... 16

3.2 Using the Stylus ...................................................................................... 16

3.3 Inserting a CF Card................................................................................. 17

3.4 Removing a CF Card .............................................................................. 17

3.5 Inserting an Micro SD Memory Card....................................................... 17

3.6 Removing a Storage Card....................................................................... 18

3.7 GPRS SIM Card Set Up .......................................................................... 18

3.8 Connecting Devices to the PWS-8033M................................................. 18

3.8.1 Connecting USB ......................................................................... 18

3.8.2 Connecting a Serial Device......................................................... 19

3.8.3 Connection to a LAN................................................................... 20

3.8.4 Connecting Headphones and a Microphone............................... 20

3.8.5 Connecting to the Cradle (Optional) ........................................... 20

Chapter 4 Getting Connected ............................21

4.1 Installing Microsoft ActiveSync................................................................ 22

4.1.1 Connecting to Your Computer .................................................... 22

4.2 Connecting with Bluetooth ...................................................................... 24

4.3 Connecting to a WLAN (Wi-Fi)................................................................ 25

4.3.1 Add a New Network .................................................................... 26

4.3.2 Connecting to an Existing Network ............................................. 26

4.3.3 Changing the Advanced Settings................................................ 27

4.3.4 View Wireless Networking Log Information ................................ 28

4.4 Connecting GPS ..................................................................................... 29

4.5 Connecting GPRS................................................................................... 30

1 PWS-8033M User Manual

Chapter 5 Advanced Settings............................ 33

5.1 Checking the Battery Status ................................................................... 34

5.2 Optimizing Battery Life............................................................................ 34

5.2.1 Changing the Automatic Power Settings .................................... 34

5.2.2 Adjusting Backlight Settings ....................................................... 35

5.3 Performing a System Reset .................................................................... 35

5.4 Changing the Screen Resolution ............................................................ 36

5.5 Rotate Screen ......................................................................................... 37

PWS-8033M User Manual 2

Chapter 1

1 General Information

1.1 Introduction

The PWS-8033M is an ultra rugged computer designed to military standards. The design incorporates the powerful Intel PXA270 624MHz CPU with Microsoft Windows CE 5.0/Mobile 6.1 operating system. The PWS-8033M provides the highest performance and reliability whilst minimizing the Total Cost of Ownership (TCO). The PWS-8033M incorporates a transflective LCD with touch-screen, keypad, Wifi, and Bluetooth communication capability. Currently available options include HSDPA (3.5G), and GPS. To minimize the Total Cost of Ownership the PWS-8033M is sealed to meet IP67 standards and complies with IEC 68-2-32 5 foot drop to concrete.

1.1.1 Features & Specifications

The PWS-8033M is a smart configurable handheld terminal which has been designed to meet the requirements of a wide range of applications including:

• Military & Law Enforcement

• Industrial & Manufacturing

• Emergency services and construction

PWS-8033M been developed to comply with MIL-STD-461E, MIL-STD-810F and IP67 standards, the main specifications are as detailed below.

PWS-8033M Military PDA Specifications

Items Description

OS Windows Mobile 6.1 / Windows CE 5.0

CPU Intel PXA270 624MHz

Memory 256MB SDRAM on board

256MB/512MB Flash ROM on board

Display 3.7” transflective TFT LCD, VGA resolution (640 X 480)/QVGA resolution

(320 X 240)

Touchscreen 4-wire Resistive touch screen

Audio System AC-97, Internal microphone and one speaker (stereo supported via ear-

phone jack)

Application Buttons

C o m m u n i c a t i o n 8 0 2 . 1 1 b / g W L A N m o d u l e b u i l t - i n w i t h i n t e g r a l a n t e n n a

Status Indicator Power LED (two color LED x1) (at right side)

One power on/suspend button

One software reset switch

Navigation Key+ Function Key (4 function keys in front)

One HW reset key located right side door

One Button for backlight on/off (using power on/ suspend button)

B l u e t o o t h c l a s s 2 , v 1 . 2 b u i l t - i n w i t h i n t e g r a l a n t e n n a

GPS & GALILEO receiver module with antenna built-in

GSM/GPRS/WCDMA/HSDPA(3.5G) internal module (for data transmission only)

LED on the upper side for lighting usage One LED for GPRS (wireless connection) (at left side)

PWS-8033M User Manual 2

I/O Ports Two USB type A connectors, USB1.1 Host (** Two USB Type A at Left

Side)

One USB mini type B connector, USB1.1 Slave (at Right Side Door)

One RS-232(full) One RS-232/422/485 (OPTION)

One RJ-45 for 10/100M ethernet (USB type)

One CF slot

One stereo headphone jack

One microphone jack

One DC-In connector (At the right side)

One MicroSD Slot

Main Battery Rechargeable Li-ion smart battery, 7.4V, 1880mAh, 2S1P, 59X38X25mm

Power Adapter Universal AC 90V ~ 265V, 47~63Hz input, 12V, 3.5A output.

Physical 155 x 96 x 42mm , 650g

Environment Operating Temperature: -20 to +60C

Storage Temperature -40 to +70C

Charging Temperature 0 to +50C Operating Humidity 5% ~ 95% none condensing

Rugged Specifications

Certification CE, FCC

Accessories 1. Case: standard nylon (waterproof) case with belt loop;

IP67 5 ft drop to concrete

MIL-STD-810F MIL-STD-461E

2. Mount: Vehicle mount (using RAM mount)

3. elastic hand strap: prevent accidental drop

4. Stylus with tether kit

5. Power: DC-Adapter & power cord 12V Vehicle charger with 12V cable (option)

6. Cradle: 1 x RS-232, 2 x USB (1x Type A; 1xTypeB), 1 x DC-in

7. External Military Connector Box: converting 2 XRS-232 and 2 XUSB to one military connector

8. 4-IN-1 battery charger

Chapter 1 General Information

1.1.2 Package Contents

The standard PWS-8033M includes the following items:

 PWS-8033M PDA unit  Power cord & adapter  Battery  Stylus & string

1.1.3 Optional Accessories

In addition the following optional accessories may be included:

• Sleeve with hand strap & shoulder strap

• Cradle

• Vehicle Mount

• 4 IN 1 Battery Charger

Please carefully check the delivery documents to ensure that all items are present. In the unlikely event of a discrepancy please contact your supplier.

3 PWS-8033M User Manual

1.2 Familiarizing Yourself with the PWS-8033M

The following sections describe the main components and features of the PWS8033M.

1.2.1 Front View

Item Description

LCD touch screen Displays the applications and data stored the PWS-8033M. It is a

touch-sensitive screen and can be operated using the stylus or finger.

Navigation Keys Press these keys to navigate in the PWS-8033M interface.

Function Keys Programmable keypad interface for controlling the PWS-8033M.

Power button If the device is off, press this button to turn it on.

When the unit is on, press this button for 3 seconds to turn the PWS-8033M off.

Power LED Indicates the battery charging power status.

Green -Battery is fully charged or the device is running on battery power. When LED flashes, the battery charge is at 13%. The battery should be recharged immediately.

PWS-8033M User Manual 4

1.2.2 Right View

Chapter 1 General Information

Item Description

RJ45 Port Connects to the LAN.

SW Reset Switch Press the end of the stylus into the button to reset the PWS-8033M. A

reset allows your device to get a fresh start, similar to warm rebooting a computer.

Earphone Plug Connects to audio line-out devices (earphones or headphones) for

use in noisy environments.

Microphone Plug Enables the recording of voice using an external microphone

USB mini type B port USB mini type B port (client).

Micro SD Slot Accommodates Micro Secure Digital memory cards.

HW Reset Switch Press the end of the stylus into the button to reset PWS-8033M.

DC IN Jack Connect the AC adapter to this jack to supply power to charge the

PWS-8033M battery.

5 PWS-8033M User Manual

1.2.3 Bottom View

Item Description

Cradle connector Connects the PWS-8033M to cradle, enabling battery charging also

Battery Cover Latch Unlock the latch to open the battery compartment cover, to place or

1.2.4 Left View

connects RS232, USBA and USB mini B).

remove battery.

Item Description

RS 232 Serial Port Connects using a mini 9 way D type connector for this port for serial

communications.

USB type A port Connects to USB type A port (host) to this port.

PWS-8033M User Manual 6

1.2.5 Back View

Chapter 1 General Information

Item Description

Stylus Enables you to interact with the operating system. Remove the stylus

Battery Compartment Houses the removable and rechargeable battery pack.

1.2.6 Top View

Item Description

CF Card Slot Additional functionality can be provided by using Compact Flash

SIM Card Slot Additional functionality can be provided by using SIM cards. Only with

from the holder and hold and use it the same way you would a pen or pencil. For use with the touch screen..

cards.

WAN module included.

7 PWS-8033M User Manual

1.3 4-In-1 Battery Charger (Optional)

Item Description

Battery Pack Holder Lock Battery pack into position for Battery charging.

DC IN Jack Connect the AC adapter to this jack to supply power to the charger

and charge the PWS-8033M Battery. *

Status LED Indicates that power and the PWS-8033M battery is charging.

RED light -Battery is charging. No Light – No battery fitted. RED light Flash once – Power Adaptor connected, and ready for

charging battery.

Warning! Both Battery charger adaptor and PWS-8033M power adaptor are the

same, but they can NOT be interchanged with other adaptor.

PWS-8033M User Manual 8

+ 30 hidden pages