ADTRAN B8ZS User Manual

Product Features

■ Provides T1 facility

interface and jitter
tolerance per ANSI
T1.403, T1.102 and
AT&T TR 62411

■ Supports B8ZS or

AMI formats

■ Conversion for signal

formats and line coding

■ Transmits unframed

"All 1’s" during signal loss
from DTE or T1 Network

■ Front Panel LCD and

4 button keypad (ACE)

■ Equipment line build-out

configuration 0-655 feet

■ Standalone ACE package

or Smart 16 single
slot card

■ Supports Performance

Report Messages of ANSI
T1.403 and AT&T 54016
maintenance messages

■ Industry-leading five-year

North American warranty

T1 ESF CSU ACE

Stand Alone and Smart 16 T1 Network Facility Interface

built-in local and remote loopback tests and
conducting stress testing of the network with
built-in test patterns. For more extensive
network testing, the unit uses bantam jack
access for external test equipment. To aid with
circuit monitoring, the T1 ESF CSU gathers
AT&T maintenance information in 15 minute
intervals for 24 hours, which is fully accessible
over the FDL or via the Smart 16 controller.

Remote configuration is made simple by
using the FDL channel for the standalone
ACE or the Smart 16 controller interface for
the rackmount version. Using the remote
configuration capability of the T1 ESF CSU
enables central site control and setup for
ADTRAN T1 CSUs or TSU devices.

The standalone ACE includes an auto­ranging 12-48V internal DC power supply and
wallmount AC power supply. The L2 version
adds a terminal block for easier connection to
an external DC supply.

For additional T1 applications, ADTRAN
provides several T1 DSU/CSUs and T1
Multiplexers for combining traditional DSX-1
functionality with additional DTE ports. The
TSU 100e

™

, TSU 120e™and TSU 600e™are
modular T1 DSU/CSUs with embedded SNMP
and are capable of supporting a single DSX-1
interface and up to 22 DTE interfaces for data
or video applications.

The ADTRAN

®

T1 ESF CSU™is a full-featured
T1 Channel Service Unit used to connect T1
data terminal equipment (DTE) such as a PBX,
switch or channel bank to T1 facilities.Capable

of interfacing to both B8ZS or AMI circuits, the
T1 ESF CSU can convert signal formats or line
code to integrate older equipment. The ESF
CSU is designed to provide alarms, loopbacks,
signal regeneration, line build-out, and surge
protection, while maintaining 1’s density for
the DTE and T1 network.

The T1 ESF CSU ACE is suitable for wall- or
rackmounting or desktop use, while the T1 ESF
CSU Smart 16 Card occupies a single slot in the
rackmount ADTRAN Smart 16 shelf. The stand­alone models provide a front panel LCD, four
user keys on the front of the ACE, and provides
easy configuration and unit monitoring from
the front panel. The ESF CSUprovides an EIA­232 port (DB-9) for provisioning through a
VT100 interface. The Smart 16 ESF CSU card
can be controlled from the shelf controller
through a VT100 interface or the optional
Datamate

™

.For SNMP management, the Smart
16 ESF CSU card is supported by the Smart 16e
controller and the ADVISION software package.

The T1 ESF CSU provides a T1 network
interface and a DSX-1 DTE connection through
modular RJ48C jacks. For testing purposes, the
T1 ESF CSU is capable of initiating several

PSTN

T1 ESF CSU ACE

T1

ESF, B8ZS

Front panel control eliminates
need for ASCII terminal in
local control applicatons.

T1

D4, AMI

RS-232
Interface

PBX, Channel Bank,
DSU, LAN Router, etc.

Test Jacks

May also be a direct connection
(no modems necessary)

Modem

Test Equipment

Modem

Remote
Monitoring
and Control

Product Specifications

Network Interface

Line Rate

■

T1/FT1 (1.544 Mbps)

Physical Interface

■

RJ48C: 8-Pin Modular

Specifications

■

ANSI T1.403, AT&T TR62411

Framing

■

SF/ESF

Line Code

■

AMI/B8ZS

ESF Format

■

ANSI T1.403, AT&T 54016

Input Signal

■

0 to -36dB

Transmission Type

■

Regenerative transparent: Network & DTE

User Testing

Local

■

Payload/Line (NI), DTE (T1)

Remote

■

Payload/Line (NI)

Test Patterns

■

1:8, All 0’s, All 1’s

Performance Monitoring

Performance Data

■

BPVs/CRCs, ES, SES, UAS, %AS, %EF SEC

■

Alarms, Error Rates

Reports

■

NI information stored 24 hrs, every 15 min.

PRMS

■

ANSI Performance Report

■

Messages (User Selectable)

Equipment Interface

Compliance

■

ANSI T1.403, AT&T 62411

Receiver Performance

■

Line Build-out for 0-655 ft.

Keep Alive Signal

■

Unframed/framed "All 1’s" loss of DTE signal

User Options

Mounting

■

Desktop or Wallmount (ACE)

■

Single Slot in ADTRAN Smart 16 Chassis

T1 ESF CSU ACE

Stand Alone and Smart 16 T1 Network Facility Interface

Bantam Jacks

■

Test Signal access to Network & DTE

■

Non-interrupt signal receive:

Network & DTE

LED Indicators (ACE)

■

Power

■

Alarms

■

Errors

■

Loopback

LED Indicators (SM 16)

■

Status

■

Net. & Eq. LOS

■

Net. & Eq. AIS■Net. & Eq. OOF

■

Net. & Eq. Yellow Alarm■T est

■

Net. & Eq. Code Violation

Compliance

■

FCC part 15, Class A, Part 68, Industry Canada CS03,
UL 1459, CUL

Environment

Operating

■

0° to 50°C (32° to 122°F)

Storage

■

-20° to 70°C (-4° to 158°F)

Relative Humidity

■

Up to 95%, non-condensing

Dimensions

■

ACE: 2" H x 6.5" D x 9.3" W

■

Smart 16 Card: Standard ADTRAN SM 16

Weight

■

1 lb.

Power

■

ACE: 12-48 VDC, 2.5W (via AC wall adapter)

■

ACE (L2): Provides terminal block for DC power

■

Smart 16 Card: From Smart 16 Chassis

Product includes

■

Manual, T1 Loopback Test Adapter, and RJ45 Cable

■

ACE includes AC wallmount power supply

Ordering Information

Equipment Part #

T1 ESF CSU ACE 1204025L1
T1 ESF CSUACE (DC) 1204025L2
T1 ESF CSU Smart 16 Rackmount Card 1202066L1

Accessories

HRM-1MA Shelf 1200411L1
VRM-7MA Shelf 1200417L1

Spare AC Power Supply 1903022L1

Specifications subject to change without notice. Datamate, T1 ESF CSU, TSU 100e, TSU 120e, and TSU 600e
are trademarks of ADTRAN, Inc. ADTRAN is a registered trademark of ADTRAN, Inc. All registered trademarks
and trademarks mentioned in this publication are the property of their respective owners.

ADTRAN, Inc.

Attn: Enterprise Networks

901 Explorer Boulevard

Huntsville, AL 35806

P.O. Box 140000

Huntsville, AL 35814-4000

256 963-8000 voice

256 963-8699 fax

General Information

800 9ADTRAN
[e-mail]
www.adtran.com

Pre-Sales

Technical Support

800 615-1176 toll-free

[e-mail]

www.adtran.com/support

Where to Buy

877 280-8416 toll-free

[e-mail]

www.adtran.com/where2buy

Post-Sales

Technical Support

888 423-8726

[e-mail]

www.adtran.com/support

ACES Installation &

Maintenance Service

888 874-ACES

[e-mail]

www.adtran.com/support

International Inquiries

256 963 8000 voice

256 963-6300 fax

[e-mail]

www.adtran.com/international

For the regional office

nearest you, visit:

www.adtran.com/regional

61204025L1-8A August 2004

Copyright©2004 ADTRAN, Inc.

All rights reserved.

ADTRAN is a

TL 9000 3.0 certified supplier.

ADTRAN is an

ISO 9001: 2000 certified supplier.