ADTRAN ATM Mini-DSLAM User Manual

Global

Product Features

■ Cost-effective DSLAM for

CO, CEV, RT, and customer
premises applications

■ 24 ports of ADSL plus

baseband POTS

■ DMT, G.Lite, and T1.413

modulations

■ Front panel access to all

connections

■ Tw o field replaceable GMT

type 3 amp fuses

■ POTS service is not power

dependent

■ Provisioning and alarm

monitoring via SNMP/ASCII
text and TL1 through the local
craft interface and ATM
in-band management channel

■ Inverse Multiplexing over

AT M (IMA) for up to four
E1 IMA links

■ Interoperable with any

E1 IMA device that is built to
current IMA specifications
which includes the
To tal Access 3000 IMA
Aggregation System

Carriers want to deploy DSLAM solutions
that can leverage their existing telecommu­nications resources.They are looking for
solutions that control cost, promote effi­ciency,and simplify operations. The

ADTRAN Total Access 1210 is a temperature­hardened DSLAM that enables delivery of
24 ports of POTS and ADSL from smaller
Central Offices (COs), Controlled
Environmental Vaults (CEVs), Multiple
Dwelling Units (MDUs), and Remote
Te r minals (RTs). The ADSL is generated
locally and placed, via onboard splitters, on
the same pair as the corresponding POTS
signal for delivery to the customer. The
DSLAM performs Inverse Multiplexing over
ATM (IMA) for up to four E1 IMA links.

ADTRAN has engineered a compact, 1U
high unit that provides RT space savings while
offering multiple options for placement
within the RT. Design flexibility leverages
existing facilities and enables the Total Access
1210 to be mounted as a rack, wall, or vertical
positioned unit inside the RT. It measures 4.45
cm H x 43.82 cm W x 28.26 cm D and offers
redundant power using –42 to –56 VDC.

The Total Access 1210 offers a scalable
network interface today with the Quad IMA
module. Future capabilities include Octal
IMA, DS3, and STM-1. These modules assure
easy deployment and dynamic network

utilization, as subscriber needs dictate. Using
multiple shelves for a single network feed can
scale the unit into a system-wide RT solution
with up to 96 ports. It supports an ADSL
service range of 18,000 feet.

Developed with ADTRAN’s concern for
carrier field needs, the Total Access 1210 has
pre-installed fan modules complete with fan
filters. Each fan module and fan filter is inde­pendently field replaceable. The fans are
controlled by heat-sensing circuits and will
run only when necessary. Front panel access
is available for all connections. The unit is
interoperable with any E1 IMA device that is
built to current IMA specifications, which
includes the Total Access 3000 IMA
Aggregation System.

Management is made simple and conven­ient through a choice of SNMP, ASCII, TL1, or
10Base-T Ethernet support. Provisioning,
alarms, and performance monitoring are
provided through the local craft interface and
ATM in-band management channel.

ADTRAN’s Total Access 1210 Mini-DSLAM
brings a cost-effective and efficient IMA,
ADSL, and POTS solution to carriers providing
subscriber services at rural CO, MDU, CEV,
and RT sites.

ATM Mini-DSLAM

Total Access 1210 ATM Mini-DSLAM

ADTRAN is a

TL 9000 registered company.

ADTRAN is an

ISO 9001:2000 registered company.

ADTRAN, Inc.

Attention:

International Department

901 Explorer Boulevard

Huntsville, Alabama 35806

USA

www.adtran.com

U.S. Headquarters

[phone] voice

[phone] fax

[e-mail]

International

Customer Service

[phone] voice

Asia Pacific—

Beijing, China

[phone] voice

[phone] fax

[e-mail]

Asia Pacific (Other than

China and Australia)—

Hong Kong, China

[phone] voice

[phone] fax

[e-mail]

Asia Pacific—

Guangzhou, China

[phone] voice

[phone] fax

[e-mail]

Asia Pacific—

Melbourne, Australia

[phone] voice

[phone] fax

[e-mail]

Europe/Middle East/Africa—

Bad Homburg, Germany

[phone] voice

[phone] fax

[e-mail]

Europe/Middle East/Africa—

Dublin, Ireland

[phone] voice

[phone] fax

[e-mail]

Latin America/Caribbean

[phone] voice

[phone] fax

[e-mail]

Mexico

[phone] voice

[phone] fax

[e-mail]

ATM Mini-DSLAM

Product Specifications

Front Panel Features

■ Five LEDs: Power, ADSL, Network, Alarm, T1/E1

■ Two 50-pin amphenol interfaces: POTS,

ADSL+POTS

■ DB-9 craft interface

■ DB-15 Alarm interface, input/output

■ Four RJ-45 uplink trunks

Mechanical

■ Dimensions: 4.45 cm H x 43.82 cm W x 28.26 cm D

(1.75 in. H x 17.25 in. W x 11.13 in. D)

■ Weight: 3.63 kg (8 lb)

■ Mounting: Rackmount or wallmount

Can be mounted in either a flush mount or mid-mount
orientation in either a 19-inch or 23-inch rack.

Interfaces

Network

■ Quad IMA

■ Octal IMA – future

■ DS3 – future

■ STM-1 – future

■ POTS

Subscriber

■ ADSL+POTS

Modulation Supported

■ DMT

■ G.Lite

■ T1.413

Total Access 1210 ATM Mini-DSLAM

Electrical

■ –42 VDC to –56 VDC

Regulatory Standards

■ NEBS Level 3

■ CE Mark

■ IEC 60950

■ EN 60950

■ EN 300 386-2

Management

■ Local: ASCII – menu

■ Remote: SNMP, TL1, 10Base-T Ethernet

Environmental

■ Operating: –40°C to +70°C

■ Storage: –40ºC to +85ºC

■ Relative humidity: 95 percent, noncondensing

Ordering Information

Equipment Part #

To tal Access 1210 ATM Mini-DSLAM 4179611L1
To tal Access 1200 RDS Shelf, 19-inch, 24-port 1179601L1
To tal Access 1200 Quad IMA 1179611L1

I64179611L1-8A September 2003

Copyright ©2003 ADTRAN, Inc.

All rights reserved.

Specifications subject to change without notice. ADTRAN is a trademark of
ADTRAN, Inc. and/or its affiliates in the U.S. and certain other countries.
Total Access is a registered trademark of ADTRAN, Inc. in the U.S. All other trade­marks mentioned in this doucment are the property of their respective owners.

1 to 4 E1s

Total Access 1210

Mini-DSLAM

24 ADSL+POTS