The information in the specification is subject to change without notice
Shanghai Kitking Electronic Co. limited LM2FB Service Manual
Content
1. General description 2
2. Features 2
3. Function layout 4
4. PCB dimension 5
5. Schematic of IR and key board 6
6. Main Board Power Supply 6
7. Interface definition 7
8. General Precaution 10
9. software upgrade steps 10
10. Board Service Manual 11
11. Schematic 19
The information in the specification is subject to change without notice 1
Shanghai Kitking Electronic Co. limited LM2FB Service Manual
1. General description
LM2FB is a multi-purpose and energy-efficient LCDTV control board with
single/dual 8/10bit LVDS interface, the resolution of LCDTV panel is up to 1920*1080.
LM2FB supports PAL/SECAM/NTSC、USB2.0、HDMI、Component、PC-RGB、
AV、S-Video 、SCART(Optional) video and audio input as well as AV (video&audio)
output , an audio D-type amplifier which supports 2x10W (8ohm) outputs is built in.
LM2FB could connect with accessory modules to support extended functions such
as built in DVD module, external USB, external HDMI. Software upgrade and
multimedia playback function are applicable with the USB slot.
2. Features
Chipset MST6M181VS
Market Area Asia Pacific
OSD
Language
LCD Panel
Video Input
Audio Input
Audio Output Max Output Power 2*10W(8ohm)
Key Function POWER,INPUT,MENU,CH+,CH-,VOL+,VOL-
Power
Terminal Input
English/French/Spanish/Russian/German/Italian/Turkish/Portuguese
Type TFT-LCD
Resolution up to 1920*1080
Interface single/dual 8/10bit LVDS
Panel power 5V,12V optional
Receiving Range 48.25MHz~865.25MHz
Input Impedance 75 ohm
Video System PAL,SECAM,NTSC
l Keep away from static and water
l Protect the board from static electricity in case of damage to the IC.
l Relative Humidity:≤80%
l Storage Temperature:-10~+60℃
l Operation Temperature:0~+40℃
l Don’t push or pull the connectors when the board is working.
l Don’t press, distort or disassemble the board
l Clean the board with soft dry cloth when it is dirty.
l Don’t wire in the board to power supply before panel is correctly connected.
The information in the specification is subject to change without notice 11
Shanghai Kitking Electronic Co. limited LM2FB Service Manual
9. software Update Steps:
Step1: Copy merge_6M181.bin file to USB disk, and then plug the disk to USB slot.
Step2: Power on the LCDTV.
Step3: Press MENU key,then left or right key, call the main menu as below:
Step2: Use up or down key, move the highlight bar to Software Update(USB) and press OK
key.
Step4: Press left key to confirm to software update or right key to cancel the operate.
Step5: Wait the end of this operation and then the LCDTV will be restart automatically.
The information in the specification is subject to change without notice 12
Shanghai Kitking Electronic Co. limited LM2FB Service Manual
10. Board service manual
The information in the specification is subject to change without notice 13
Shanghai Kitking Electronic Co. limited LM2FB Service Manual
The information in the specification is subject to change without notice 14
Shanghai Kitking Electronic Co. limited LM2FB Service Manual
The information in the specification is subject to change without notice 15
Shanghai Kitking Electronic Co. limited LM2FB Service Manual
The information in the specification is subject to change without notice 16
Shanghai Kitking Electronic Co. limited LM2FB Service Manual
The information in the specification is subject to change without notice 17
Loading...
+ 40 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.