ADJ Element ST Hex Akku LED Scheinwerfer User Manual [EN]

ELEMENT ST HEX

User Instructions

USA# ELE457

EU# 1226100379

UPC# 818651027853

ITF-14# 10818651027850

©2020 ADJ Products, LLC all rights reserved. Information, specications, diagrams, images, and

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device uses and can radiate radio frequency energy and, if not installed and used in accordance with
the included instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the following methods:

· Reorient or relocate the device.

· Increase the separation between the device and the receiver.

· Connect the device to an electrical outlet on a circuit different from which the radio receiver is
connected.

· Consult the dealer or an experienced radio/TV technician for help.

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying
product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection
claimed includes all forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this document may be
trademarks or registered trademarks of their respective companies and are hereby acknowledged.
All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of

their respective companies.

ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property,
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic
loss associated with the use or reliance of any information contained within this document, and/or as
a result of the improper, unsafe, unsucient and negligent assembly, installation, rigging, and opera­tion of this product.

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated version of this document
may be available online.
Please check www.adj.com for the latest revision/update of this manual before beginning
installation and/or programming.

Date

02/05/20

Document
Version

1 1.00

Software
Version >

DMX Channel Mode

6/7/8/11/12 Initial Version

Notes

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment. Please turn o all electrical prod­ucts when they are not in use. To avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

Element ST Hex Table of Contents

Introduction
Features I Warranty Registration I Installation
Safety Guidelines

Battery Precautions
Battery Status & Charging
Overview

Installation
DMX Addressing
DMX Modes

Color Macro Chart
System Menu

3
4
5
7
8

9
10
11
12
14
15

WiFly Set Up I WiFly Master-Slave Set Up
UC IR & Airstream Control

Dimmer Curve Chart

Dimensional Drawings I Tilt Adjustment Angles
Trouble Shooting I Cleaning
Limited Warranty (USA Only)
Technical Specications

18
19
20
21
22
23
24

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 2

Element ST Hex Introduction

Unpacking: Thank you for purchasing the Element ST Hex by ADJ Products, LLC. Every Element ST
Hex has been thoroughly tested and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your xture for any damage and be sure all accessories necessary to oper-
ate the unit has arrived intact. In the case damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Do not return this unit to your dealer
without rst contacting customer support.

Introduction: The Element ST Hex is a rechargeable lithium battery powered, DMX intelligent, LED
par fixture with ADJ’s WiFly TransCeiver with wireless DMX built-in. WiFly control and battery power
gives you the freedom to set up your unit where ever you wish without the restrictions of power or DMX
cabling. This unit can be used in a stand alone mode or connected in a Master/Slave set up. To optimize the
performance of this product, please read these operating instructions carefully to familiarize yourself
with the basic operations of this unit. These instructions contain important safety information regarding
the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

Customer Support: Contact ADJ Service for any product related service and support needs. Also visit

forums.adj.com with questions, comments or suggestions.

Parts: To purchase parts online visit http://parts.americandj.com

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
Voice: 800-322-6337 | Fax: [phone] | [e-mail]

ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: [phone] | Fax: [phone] | [e-mail]

ADJ PRODUCTS LLC USA

6122 S. Eastern Ave. Los Angeles, CA. 90040
323-582-2650 | Fax [phone] | www.adj.com | [e-mail]

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands
[phone] | Fax [phone]

www.adj.eu | [e-mail]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

[phone]

Warning! To prevent or reduce the risk of electrical shock or re, do not expose this unit to rain or

moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,
doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 3

Element ST Hex Features

• Multiple Operating Modes

• Electronic Dimming 0-100%

• RGBWA+UV Color Mixing

• 5 Selectable Dimming Curves

• 63 Color Macros

• Built in Microphone

• Multiple DMX Channel Modes

• Battery Powered with Rechargeable Lithium Battery

• Built-In ADJ’s WiFly TransCeiver Wireless DMX

• ADJ UC IR & Airstream IR compatible

Incuded Accessories:
1 x 12.6V/2A DC Power Adapter
1 x UC IR Remote Control
1 x Airstream IR Transmitter

Element ST Hex Warranty Registration

The Element ST Hex carries a 2 year limited warranty. Please fill out the enclosed warranty card to
validate your purchase. All returned service items whether under warranty or not, must be freight pre­paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on
the outside of the return package. A brief description of the problem as well as the R.A. number must
also be written down on a piece of paper included in the shipping carton. If the unit is under warranty,
you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by con­tacting our customer support team on our customer support number. All packages returned to the
service department not displaying a R.A. number on the outside of the package will be returned to the

shipper.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 4

Element ST Hex Safety Guidelines

• To reduce the risk of electrical shock or re, do not expose this unit rain or moisture

• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to
remove or break o the ground prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user serviceable parts inside.

• Never operate this unit when it’s housing is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm)
between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 22
for cleaning details.

• Heat -The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. The appliance does not appear to operate normally or exhibits a marked change in performance.
C. The fixture has fallen and/or subjected to extreme handling.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 5

Element ST Hex Safety Precautions

RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET (UV) RADIATION!

FIXTURE EMITS HIGH INTENSITY ULTRAVIOLET (UV) LIGHT FROM THE UV LED.

WEAR PROPER EYE AND SKIN PROTECTION.

AVOID PROLONGED PERIODS OF EXPOSURE TO THE UV LED.

AVOID WEARING WHITE COLOR CLOTHING AND/OR USING (UV) PAINTS ON SKIN.

AVOID DIRECT EYE AND/OR SKIN EXPOSURE AT DISTANCES SHORTER THAN 11 feet (3.3m).

DO NOT OPERATE FIXTURE WITH DAMAGED OR MISSING EXTERNAL COVER.

DO NOT LOOK DIRECTLY INTO THE (UV) LIGHT AND/OR VIEW (UV) LIGHT DIRECTLY WITH
OPTICAL INSTRUMENTS THAT MAY CONCENTRATE THE LIGHT/RADIATION OUTPUT.

INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE
DISORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE
DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET (UV) LIGHT EMITTED FROM THIS FIXTURE.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 6

Element ST Hex Battery Precautions

1. Handling of Batteries

1.1 Do Not Short Circuit the Battery

Try to never short circuit the battery. It generates a very high current which could cause the battery
to overheat which may result in electrolyte gel leakage, harmful fumes, or explosion. The LIR tabs
may easily short-circuit by placing them on conductive surface. A short circuit may lead to heat build
up and damage of the battery. An appropriate circuitry with PCM is employed to protect accidental

short circuit of the battery pack.

1.2 Mechanical shock

Droping the unit, impact hit, bending, etc. may cause failure or shortend life of the LIR battery.

3. Other

3.1 Battery connection

1). Direct soldering of wire leads or devices to the battery is strictly prohibited.

2). Lead tabs with pre-soldered wiring shall be spot welded to the batteries. Direct soldering may
cause damage of components, such as separator and insulator, by heat build up.

3.2 Prevention of short circuit within a battery pack

There is enough insulation layers between wiring and the batteries to provide extra safety protection.
The battery pack is constructed in a way that no short circuit will occur which may cause smoke or
re.

3.3 Do No Disassemble the Batteries

1). Never disassemble the batteries.
Doing this may cause a internal short circuit in the battery, which may lead to harmful fumes, re,
explosion, or other problems.

2). Electrolyte Gel is harmful

Electrolyte Gel should not leak from the LIR battery. Should the electrolyte gel come into contact
with the skin or eyes, ush the area of contact immediately with fresh water and seek medical atten­tion immediately.

3.4 Do Not Expose the Battery to Heat or Fire

Never incinerate or dispose of the batteries in re. This may cause an explosion, which would be
very dangerous.

3.5 Do Not Expose the Battery to water or liquids

Never soak/drop the batteries in liquids such as water, seawater, drinks such as soft drinks, juices,
coee or other.

3.6 Battery Replacement

For battery replacement please contact ADJ customer support [phone].

3.7 Do Not use a damaged Battery

The battery could be damaged during shipping, caused by shock. Should the battery be found dam­aged, including damages to the plastic casing of the battery, deformation of the battery package,
smelling of an electrolyte, or leakage of the electrolyte gel, or other, DO NOT use the battery. A bat­tery with a odor of electrolyte or a gel leakage should be placed away from re to avoid re or explo-

sion.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 7

Element ST Hex Battery Precautions

4. Battery Storage

When storing the battery, it should be stored at room temperature, with a charge of at least 50%. We
recommend that during long periods of storage that the battery be charged every 6 months. Doing
this will prolong the life of the battery and will also make sure that the battery charge does not fall
below the 30% mark.

5. Other Chemical Reaction

Because batteries utilize a chemical reaction, battery performance will deteriorate over time even if
stored for a long period of time without being used. In addition, if the various usage conditions such
as charge, discharge, ambient temperature, etc. are not maintained within the specied ranges, the
life expectancy of the battery maybe shortened or the device in which the battery is used may be
damaged by electrolyte gel leakage. If the batteries cannot maintain a charge for long periods of
time, even when they are charged correctly, this may indicate it is time to change the battery.

6. Battery Disposal

Please dispose of battery according to local regulations.

Element ST Hex Battery Status & Charging

Battery Status:

This function is used to check the battery life status.

1. Plug the fixture in and press the BATTERY icon.

2. Press the UP or DOWN buttons to highlight CURRENT LIFE and press ENTER. The number that is
displayed is the remaining battery life.

Never let the battery fully die, this severly shortens the life of the battery.

Battery Charging:

This function is used to check the battery charging status.

1. Plug the fixture in and press the BATTERY icon.

2. Press the UP or DOWN buttons to highlight CHARGING TIME and press ENTER. The number that
is displayed is the remaining battery life.

To recharge the battery, plug the supplied power adapter into the input located on the bottom of the
unit and plug the other end into a matching power source. TO CHARGE THE BATTERY, THE POWER

SWITCH MUST BE IN THE “ON” POSITION. It takes about 5 hours to reach full charge.

NOTE: CHARGING TIME will display “------------” when:

- The power adapter is NOT connected.

- The POWER SWITCH is “ON” but the LOAD setting is set to “OFF”.

- The power adapter is connected but the POWER SWITCH is “OFF”.

Note: When unplugging the unit from charging and then applying power via battery, there will
be a minimal charge drop.

For faster charging, turn the POWER SWITCH “ON” and the LOAD setting to “OFF”.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 8

Element ST Hex Overview

1

3

2

4

1. Service Port: This port is used for software updates.

2. Tilt Adjustment Leg: This tilt adjustment leg is used to angle the unit to various degrees. There

are 7 dierent angled levels. See page 21 for more information.

NOTE: Sliding the adjustment leg out to far will cause the leg to “dislodge” from the unit.

3. Voltage Adapter Input: This input is used to connect the included voltage adapter. After connecting

the adapter, plug the other end into a matching power source.
NOTE: Please only use the provided power adapter that is included with the unit.

4. Power On/O Switch: This switch is used to power ON/OFF the unit.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 9

Element ST Hex Installation

NOTICE: The suitable enviromental temperature for this lighting xture is between -25˚ C to 45˚ C.

Do not place this lighting xture in an enviroment where the temperatures are under or above the
temperatures stated above. This will allow the xture to run at its best and help prolong the xture

life.

The Element ST Hex is fully operational in three dierent mounting positions; set on a at level surface
(ideal set up), hanging upside-down, or mounted sideways on trussing. Be sure this xture is kept at
least 12m (40ft) away from any ammable materials (decoration etc.). Always use and install a safety
cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails.
Never use the carrying handle for a secondary attachment.

Attach a clamp to the unit by screwing
the clamp in clockwise.

Clamp Mounting Hole

This unit is primarily designed for uplighting. The unit does come with a threaded mounting hole for
use with clamp installation. Screw one clamp via a M10 screw into the insert located on the rear of

the unit.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 10

Element ST Hex DMX Addressing

All xtures should be given a DMX starting address when using a DMX controller, so the correct xture
responds to the correct control signal. This digital starting address is the channel number from which
the xture starts to “listen” to the digital control signal sent out from the DMX controller. The assignment
of this starting DMX address is achieved by setting the correct DMX address on the digital control
display on the xture.

You can set the same starting address for all xtures or a group of xtures, or set dierent addresses
for each individual xture. Setting all xtures to the same DMX address will cause all xtures to react
in the same way, in other words, changing the settings of one channel will aect all the xtures

simultaneously.

If you set each xture to a dierent DMX address, each unit will start to “listen” to the channel number
you have set, based on the quantity of DMX channels of each xture. That means changing the settings
of one channel will only aect the selected xture.

In the case of the Element ST Hex, when in 6 channel mode you should set the starting DMX address
of the rst unit to 1, the second unit to 7 (6 + 1), the third unit to 13 (7 + 6), and so on. (See chart below
for more details.)

Channel Mode

6 channels  1 7  13 19 

7 channels  1 8  15

8 channels  1 9  17

11 channels 1

12 channels 1

Unit1

Address

Unit2

Address

12 23

13 25

Unit3

Address

Unit4

Address

22

25

34

37





ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 11

Element ST Hex DMX Channel Modes

ADJ ELEMENT ST HEX

DMX Channel Values & Functions

6 CH

1

2

3

4

5

6

Supports Software Version >1.00

7 CH 8 CH 11 CH 12 CH

1

2

3

4

5

6

7 7

1

2

3

4

5

6

8

1

2

3

4

5

6

7

8 8

9 9

Feature subject to change without notice

VALUES FUNCTIONS

1

000-255

2

000-255

3

000-255

4

000-255

5

000-255

6

000-255

7

000-255

000-031
032-063
064-095
096-127
128-159
160-191
192-223
224-255

000-051
052-102
103-153
154-204
205-255

RED

0~100%

GREEN

0~100%

BLUE

0~100%

WHITE

0~100%

AMBER

0~100%

UV

0~100%

MASTER DIMMER

0~100%

STROBING

LED OFF
LED ON
STROBING SLOW-FAST
LED ON
PULSE STROBING SLOW-FAST
LED ON
RANDOM STROBING SLOW-FAST
LED ON

PROGRAM SELECTION MODE

RGBWA+UV DIMMING MODE
COLOR MACRO MODE
COLOR CHANGE MODE
COLOR FADE MODE
SOUND ACTIVE MODE

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 12

Element ST Hex DMX Channel Modes

VALUES FUNCTIONS6 CH 7 CH 8 CH 11 CH 12 CH

PROGRAMS
COLOR MACRO MODE

000-255

000-015
016-031
032-047
048-063
064-079
080-095
096-111
112-127
128-143
144-159
160-175
176-191
192-207
208-223
224-239
240-255

PLEASE SEE THE COLOR MACRO CHART
ON PAGE 14

COLOR CHANGE MODE

COLOR CHANGE 1
COLOR CHANGE 2
COLOR CHANGE 3
COLOR CHANGE 4
COLOR CHANGE 5
COLOR CHANGE 6
COLOR CHANGE 7
COLOR CHANGE 8
COLOR CHANGE 9
COLOR CHANGE 10
COLOR CHANGE 11
COLOR CHANGE 12
COLOR CHANGE 13
COLOR CHANGE 14
COLOR CHANGE 15
COLOR CHANGE 16

10

10

000-015
016-031
032-047
048-063
064-079
080-095
096-111
112-127
128-143
144-159
160-175
176-191
192-207
208-223
224-239
240-255

000-015
016-031
032-047
048-063
064-079
080-095
096-111
112-127
128-143
144-159
160-175
176-191
192-207
208-223
224-239
240-255

COLOR FADE MODE

COLOR FADE 1
COLOR FADE 2
COLOR FADE 3
COLOR FADE 4
COLOR FADE 5
COLOR FADE 6
COLOR FADE 7
COLOR FADE 8
COLOR FADE 9
COLOR FADE 10
COLOR FADE 11
COLOR FADE 12
COLOR FADE 13
COLOR FADE 14
COLOR FADE 15
COLOR FADE 16

SOUND ACTIVE MODE

SOUND ACTIVE MODE 1
SOUND ACTIVE MODE 2
SOUND ACTIVE MODE 3
SOUND ACTIVE MODE 4
SOUND ACTIVE MODE 5
SOUND ACTIVE MODE 6
SOUND ACTIVE MODE 7
SOUND ACTIVE MODE 8
SOUND ACTIVE MODE 9
SOUND ACTIVE MODE 10
SOUND ACTIVE MODE 11
SOUND ACTIVE MODE 12
SOUND ACTIVE MODE 13
SOUND ACTIVE MODE 14
SOUND ACTIVE MODE 15
SOUND ACTIVE MODE 16

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 13

Element ST Hex DMX Channel Modes

0-3=Off

64-67=B+W

128-131=G+B+W

192-195=R+B+W+A

4-7=Red

68-71=B+A

132-135=G+B+A

196-199=R+B+W+UV

8-11=Green

72-75=B+UV

136-139=G+B+UV

200-203=R+B+A+UV

12-15=Blue

76-79=W+A

140-143=G+W+A

204-207=R+W+A+UV

16-19=White

80-83=W+UV

144-147=G+W+UV

208-211=G+B+W+A

20-23=Amber

84-87=A+UV

148-151=G+A+UV

212-215=G+B+W+UV

24-27=UV

88-91=R+G+B

152-155=B+W+A

216-219=G+B+A+UV

28-31=R+G

92-95=R+G+W

156-159=B+W+UV

220-223=G+W+A+UV

32-35=R+B

96-99=R+G+A

160-163=B+A+UV

224-227=B+W+A+UV

36-39=R+W

100-103=R+G+UV

164-167=W+A+UV

228-231=R+G+B+W+A

40-43=R+A

104-107=R+B+W

168-171=R+G+B+W

232-235=R+G+B+W+UV

44-47=R+UV

108-111=R+B+A

172-175=R+G+B+A

236-239=R+G+B+A+UV

48-51=G+B

112-115=R+B+UV

176-179=R+G+B+UV

240-243=R+G+W+A+UV

52-55=G+W

116-119=R+W+A

180-183=R+G+W+A

244-247=R+B+W+A=UV

56-59=G+A

120-123=R+W+UV

184-187=R+G+W+UV

248-251=G+B+W+A+UV

60-63=G+UV

124-127=R+A+UV

188-191=R+G+A+UV

252-255=R+G+B+W+A+UV

VALUES FUNCTIONS6 CH 7 CH 8 CH 11 CH 12 CH

PROGRAM SPEED/SOUND SENSITIVITY

1111

12

000-255
000-255

000-020
021-040
041-060
061-080
081-100
101-255

PROGRAM SPEED SLOW-FAST
LEAST SENSITIVE-MOST SENSITIVE

DIMMER CURVES

STANDARD
STAGE
TV
ARCHITECTURAL
THEATRE
DEFAULT TO UNIT SETTING

NOTES:

When Channel 9 is between the values of 0-51, Channels 1-6 are used, and Channel 8 will control
strobing.

When Channel 9 is between the values of 52-102, Channel 10 is in Color Macros Mode, and
Channel 8 will control strobing.

When Channel 9 is between the values of 103-153, Channel 10 is in Color Change Mode, and
Channel 11 will control the color change speed.

When Channel 9 is between the values of 154-204, Channel 10 is in Color Fade Mode, and
Channel 11 will control the color fade speed.

When Channel 9 is between the values of 205-255, Channel 10 is in Sound Active Mode, and
Channel 11 will control the sound sensitivity.

Element ST Hex Color Macro Chart

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 14

Element ST Hex System Menu

SYSTEM MENU

This xture includes a system menu with an easy to navigate touch screen control panel where all
necessary settings and adjustments are made. When rst powering on the xture, the xture’s main
menu will be displayed. On the main menu, press the menu you would like to access. In the next
menu screen, you can navigate through the dierent sub-menus with the UP and DOWN buttons.
When you reach a sub-menu that you would like to enter press the ENTER button. When you reach
a sub-menu or eld that requires adjusting, press the ENTER button to access that eld and use the
UP or DOWN buttons to adjust the eld. Pressing the ENTER button once more to conrm your setting.
You may exit the main menu at any time without making any adjustments by pressing the BACK/EXIT

button.

DMX

SETTINGS

INTERNAL

PROGRAMS

PERSONALITY MANUAL

INFORMATION

CONTROL

BATTERY

MAIN MENU SCREEN

SUBMENU SCREEN

BACK/EXIT UP DOWN ENTER

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 15

Element ST Hex System Menu

MENU OPTIONS DESCRIPTIONSUBMENU

DMX Address

001-XXX

DMX Addressing

DMX SETTINGS

PERSONALITY

MANUAL

CONTROL

INTERNAL

PROGRAMS

DMX Channel
Mode

No DMX Status

Master

Slave

Dim Modes

WiFly Settings

Display

Language

Service

Red
Green
Blue
White
Amber
UV
Color Macros
Strobe
Master Dimmer

Program 0
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Program 12
Program 13
Program 14
Program 15

6ch / 7ch / 8ch / 11ch / 12ch

Hold Last / Blackout / Manual Settings /

Internal Programs

ON / OFF

ON / OFF

Standard/Stage/TV/Architectural/Theatre/Stage2
Dim Speed: 00 (No Delay), 1s ~ 99s

Set WiFly Channel: 00~14

Enable WiFly: YES / NO

DMX Channel Mode
Selection

DMX Lost Status

Master Setting

Slave Setting

Dimming Curve Modes
Dimming Delay Speed

Set WiFly Wireless Channel

Activate WiFly

Disable WiFly: YES / NO Deactivate WiFly

WiFly On with Power: YES / NO WiFly Active with Power

Screen Saver Delay: OFF, 1~10S Display Blackout Time
Touch Screen Lock: OFF / 1~30S / 1 Minute Display Control Lock
Rotate Display 180˚: YES / NO Display Inversion

Passcode = 050 English / Spanish

Passcode = 011

Factory Restore: YES / NO Restore Factory Settings
USB Port Power: YES / NO USB/Service Port Activation

Displayed Language

000-255
000-255
000-255
000-255
000-255

Manual Control

000-255
000-255
000-255
000-255

Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF
Speed: 01~16 / Fade: 00~16 / Sound: ON / OFF

Program 0 with Adjustments
Program 1 with Adjustments
Program 2 with Adjustments
Program 3 with Adjustments
Program 4 with Adjustments
Program 5 with Adjustments
Program 6 with Adjustments
Program 7 with Adjustments
Program 8 with Adjustments
Program 9 with Adjustments
Program 10 with Adjustments
Program 11 with Adjustments
Program 12 with Adjustments
Program 13 with Adjustments
Program 14 with Adjustments
Program 15 with Adjustments

Current LED Temperature

Current Software Version

Current Charge Time

Current Battery Life

INFORMATION

LED Temperature XXX ˚C / XXX ˚F

Software Version X.XX

Charging Time X.Xhours

Current Life XXX%

Operation Mode Standard 4 / Saver 6 / Saver 8 Current Battery Mode

BATTERY

Load Switch ON / OFF

Activate/Deactivate Output

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 16

Element ST Hex System Menu

DMX SETTINGS - The submenus listed under DMX SETTINGS are as follows: DMX Address, DMX

Channel Mode, and No DMX Status.

- DMX ADDRESS MODE - In this submenu you are able to nd and set your desired DMX address.

- DMX CHANNEL MODE - In this submenu you are able to nd and set your desired DMX channel

mode.

- NO DMX STATUS - This setting is used as a precaution mode in case the DMX signal is lost or
interrupted. The operating mode chosen is the running mode the xture will go into when the DMX
signal is lost. Listed below are the 4 modes.

• HOLD LAST - This setting will have the xture stay in the last DMX setup.

• BLACKOUT - This setting will have the xture automatically go into blackout mode.

• MANUAL SETTINGS - This setting will have the xture automatically revert to your manual settings.

• INTERNAL PROGRAM - This setting will have the xture automatically run 1 of 15 (0-15) internal

programs.

PERSONALITY - The submenus listed under PERSONALITY are as follows: Master, Slave, Dim
Modes, WiFly Settings, Display, Language, and Service.

- MASTER - Set the unit to act as the Master unit in a master-slave set up.

- SLAVE - Set the unit to act as a slave unit in a master-slave set up.

- DIM MODES - In this submenu you are able to set your desired dimmer mode or adjust and set

your desired dimming speed.

- DISPLAY - In this submenu you are able to set your display blackout time, touch screen lock time,
and invert the display.

- LANGUAGE - In this submenu you are able to select your desired display language.

- SERVICE - In this submenu you are able to reset the unit to its factory/default settings.

MANUAL CONTROL - This submenu is for manual control and testing.

INTERNAL PROGRAMS - This menu allows you to select 1 of 15 (0-15) internal programs to run. The

internal program speed and fade speeds are adjustable. The internal programs can also be run as
sound active.

INFORMATION - The submenus listed under INFORMATION are as follows: LED Temperature and
Software Version.

- LED TEMPERATURE - This submenu allows you to check the current LED temperature.

- SOFTWARE VERSION - This submenu allows you to check the current software version.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 17

Element ST Hex System Menu

BATTERY - The submenus listed under BATTERY are as follows: Charging Time, Current Life,

Operation Mode, and Load Mode.

- CHARGING TIME - This submenu is used when charging the unit. It allows you to check the

status of the charging time.

- CURRENT LIFE - This submenu allows you to check the battery life.

- OPERATION MODE - In this submenu you are able to select and set your desired energy saving

mode.

- LOAD MODE - In this submenu you are able to activate/deactivate the LED PCB output.
NOTE: This function needs to be activated when using battery power or AC power. For faster

charging switch this setting to “OFF”.

Element ST Hex WiFly Set Up

This unit can only be controlled using WiFly. Your DMX controller must be connected to a ADJ
WiFly Transceiver to use this function. You are able to communicate up to 2500 feet/760 meters

(open line of sight).

1. Follow the system menu diagram on page 16 to set the WiFly address and to activate WiFly. The
address must match the address set on the WiFly Transceiver.

2. After you have set the WiFly address, follow the system menu diagram on page 16 to select your
desired DMX Channel mode and set your DMX address.

3. Apply power to the WiFly Transceiver. The fixture must be set up first before you apply power to
WiFly Transceiver.

4. If everything is set up properly and the fixture is receiving a Wireless signal, you should now be

able to control it with a DMX controller.

Element ST Hex WiFly Master-Slave Set Up

WiFly Master-Slave Set Up:

This function will allow you to link units together via WiFly to run in a Master-Slave setup.

1. Follow the system menu diagrom on page 16 to set the WiFly address and to activate WiFly. The
addresses on each fixture must be the same.

2. After you have set the WiFly address, select your “MASTER” unit. Activate the “MASTER” setting
by following the system menu diagram on page 16.

3. Set the “MASTER” unit to your desired mode of operation. On the “SLAVE” unit(s) follow the system
menu diagram on page 16 to activate the “SLAVE” setting.

4. If everything is set up correctly, the “SLAVE” unit(s) will start following the “MASTER” unit.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 18

Element ST Hex UC IR & Airstream Control

The UC IR infrared remote gives you control of various functions (See below). To control the fixture
you must aim the remote at the front of the fixture and be no more than 30 feet away.

The Airstream IR remote transmitter plugs into the headphone jack of your iOS phone or tablet. To
control your IR fixture you must raise the volume to the maximum on your iOS phone or tablet and
aim the transmitter at the fixture sensor and be no more than 15 feet away. After you have purchased
the Airstream IR transmitters, the app is a free download from the app store for your iOS phone or
tablet. The app comes with 3 pages of control depending on the fixture you are using. Please see
below for the IR functions including the corresponding app page.

Standby

FullON Fade/Gobo 

Strobe Color 

1 2 3
4 5 6
7 8 9

SoundOn Show0 SoundO

Works with App page 1.

STAND BY - Pressing this button will blackout the fixture. Press the button again to return to the initial

state.

FULL ON - Press this button to fully light up the unit.

FADE/GOBO - This button can activate the internal programs. Use the numeral buttons 1-9 to select

the program number. Use the dimmer buttons to adjust the output intensity. Note: Running speed is
not adjustable using the IR control functions.
Example: Press the numeral buttons “1+3” to run program “13”.

“DIMMER +” and “DIMMER -” - Use these buttons to adjust the output intensity.

STROBE - Press this button to activate strobing. Use buttons 1-4 to adjust the strobe speed. “1”

being the slowest, “4” being the fastest.

COLOR - Press this button to activate color macro mode. Use the numeral buttons 1-9 or a combination
of two numbers to select your desired color. Example: Press the numeral buttons “1+3” to select color
macro “13”.

Numeral Buttons 1-9 - Use buttons 1-9 to select your desired color in color macro mode or internal
program in internal program mode.

SOUND ON & OFF - Use the buttons to activate and deactivate sound active mode.

SHOW 0 - This button is used with the numeral buttons to select your desired color in color macro

mode or program in internal program mode.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 19

Element ST Hex Dimmer Curve Chart

DIMMER

100%

50%

10%

0%

Time (ms)

255 255

0 0

Stage 780 1100 1540 1660

TV 1180 1520 1860 1940

Architectural 1380 1730 2040 2120

0 sec Fade Time

1 sec Fade Time

0 Sec

Rise Time Down Time

Dimming Curve

Ramp Effect

Rise Time (ms) Down Time (ms) Rise Time (ms) Down Time (ms)

Standard (default) 0 0 0 0

Theatre 1580 1940 2230 2280

Stage 2

0 1100 0 1660

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 20

73° 69° 65°

Element ST Hex Dimensional Drawing

5.6” / 143mm

5” / 127mm

5.12” / 130mm

Element ST Hex Tilt Adjustment Angles

To use the tilt adjustment leg, locate the release button on the bottom of the unit. While sliding the
button back and holding it, carefully slide out the tilt adjustment leg from the base of the unit. After
you have found your desired adjustment level, release the button to lock the leg into place. Make
sure the leg is securely locked into place before setting the unit in its intended location. There are 7
levels of adjustment to select from. See the diagram below to nd the desired angle you would like

the unit to sit at.

NOTE: Do not slide the leg out past the last setting (seventh level), due to the fact the leg could
dislodge from the unit.

*NOT TO SCALE

90° 85° 81° 77°

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 21

Element ST Hex Trouble Shooting

Listed below are a few common problems the user may encounter, with solutions.

Unit not responding to DMX:

1. Make sure that the WiFly is enabled.

2. Check the setting under “WiFly On with Power”.

3. Make sure that the Element ST Hex Wireless Address matches the address set on the wireless

transceiver.

Unit does not respond to sound:

1. Make sure that Sound Active mode is activated under Internal Programs. Sound activity will only
work with Internal Program mode.

2. Quiet or high pitched sounds will not activate the unit.

Element ST Hex Cleaning

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.

2. Clean the external optics with glass cleaner and a soft cloth every 20 days.

3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue,
dust, dew).

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 22

Element ST Hex Limited Warranty (USA Only)

MANUFACTURER’S LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing

defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period
on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including
possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product–please

contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC
factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are
within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point
within the United States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories
should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall
have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner

which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been
repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued
to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the

instruction manual.

D. This is not a service contract, and this warranty does not include maintnance, cleaning or periodic check up.

During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or
refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or
workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the
product, or

replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this

warranty were manufactured after August 15, 2012, and bear indentifying marks to that effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without

any obligation to include these changes in any products theretofore manufactured.

No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products

described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products,
LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the
warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or
fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall
be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products,
LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this
product.

This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties

and written descriptions of warranty terms and conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

• Non L.E.D. Lighting Products = 1-year (365 days) Limited Warranty (Such as: Special Effect Lighting, Intelligent
Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands
etc. excluding LED and lamps)

• Laser Products = 1 Year (365 Days) Limited Warranty (excluding laser diodes which have a 6 month limited

warranty)

• L.E.D. Products = 2-year (730 days) Limited Warranty (excluding batteries which have a 180 day limited warranty).

Note: 2 Year Warranty only applies to purchases within the United States.

• StarTec Series = 1 Year Limited Warranty (excluding batteries which have a 180 day limited warranty).

• ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 23

Element ST Hex Technical Specifications

Model:

Element ST Hex

Voltage: 100V ~ 240V/50~60Hz 1.5A MAX. (Input)
Power Adapter: 12.6V/2A (Output)
LEDs: 4 x 6W Hex LEDs (RGBWA+UV 6-in-1)
Working Position: Any safe working position
Power Draw: 29W
Wavelength: 395~435nm
Weight: 4lbs./ 1.8 Kgs.
Dimensions: 5.12” (L) x 5.12” (W) x 5.6” (H)

130 x 130 x 143mm

Colors: RGBWA+UV
DMX Channels: 5 DMX Modes: 6 Channel Mode 7 Channel Mode,

8 Channel Mode, 11 Channel Mode, &
12 Channel Mode
Battery Charge Time: 5 Hours (With POWER ON and LOAD OFF)

7.5 Hours ((With POWER ON and LOAD ON)*

Battery Life: FULL CHARGE, SINGLE COLOR:

15 Hours (Standard 4)
20 Hours ( Saver 6)
25 Hours (Saver 8)

FULL CHARGE, INTERNAL PROGRAM:

9 Hours (Standard 4, Saver 6, Saver 8)

FULL CHARGE, FULL ON:

4 Hours (Standard 4)
6 Hours ( Saver 6)
8 Hours (Saver 8)

Battery Lifetime: Average Lifetime is 500 Charges**
Battery Type: Fixed Lithium Battery
Battery Energy: 73.26WH (Watt Hours)
Battery Weight: 1 lb. / 0.42kg
Battery Voltage: 11.1V
Battery Capacity: 6.6AH
Total Lithium Ion Cells: 9pcs
Battery Wrap Material: PVC Sleeving + Highland Barley Paper
Warranty: 2 Year (730 days) Limited Warranty***

* With Single Color ON
** This depends on charging frequency
***See Warranty page for more details

Please Note: Specications and improvements in the design of this unit and

this manual are subject to change without any prior written notice.

ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 24