Adec and Partner SWING1212R, SWING1212 User Manual

21

18

17

21
19

20

22 23 24 25 26 27

Table of content Page

Safety information 25
Scope of delivery 26
Quick overview 27

Overview headphone: 27
Overview LR earpiece: 27
Overview sender: 27
Overview accessories: 27

Connect sender to a sound source 28

Connect sender to a Cinch female connector 29
Connect sender to a SCART female connector 29
Connect sender headphone connector 30
Connect the sender to the microphone (optional) 30
Connect sender to the USB connector 31
Connect sender to the mains supply 31

Use Swing digital 32

Use SWING digital standard version 32
Use SWING digital LR 32
Safety lock in the tele-loop 33
Listening with the 3.5 mm stereo output 33
Pairing of sender and receiver 34
Set balance 35
Adjust audio 35
Set volume 36
Transparent cover 36
Range 36
Charge battery 37

Cleaning and care 38

Clean transmitter and receiver 38
Cleaning of silicone ear adapters 38
Exchange of the silicone ear adapters 38

Important information 39

Warranty 39
Environmental information/disposal 40
Battery 40

Failure cause and resolution 41
Technical Data 43

English 24

Safety information

UÊ Before you start operating this device, read these instructions carefully

and completely.

UÊ Please retain these operating instructions carefully to ensure that they are

accessible at any time also for other users.

UÊ The device and especially the power supply are designed exclusively

for operation in dry interior spaces. A flawless function is guaranteed for
a room temperature of 10 °C to 35 °C.

UÊ Please handle the device and the accessories always carefully and install

them only in low-dust and clean locations.

UÊ Clean the sender and the receiver regularly. For hygienic reasons, the

soft silicone ear adapters should be cleaned regularly. For the exchange,
please use the soft silicone ear adapters offered as special accessories.

UÊ Paints and furniture polishes can chemically attack the rubber feet of the

sender and therefore they may cause surface damage to your furniture.

UÊ To supply the sender, please use only the provided power supply.
UÊ We recommend to unplug the power supply from the electrical outlet in

case your are absent for several days.

Caution:

High volume can be set on your receiver. Please adhere to the following
information to protect your ears or the ears of persons with normal hearing,
especially children, from hearing impairments due to a high volume.

1. Please set a low volume level before you put the receiver on.

2. During use, adjust the volume to a level agreeable to you. Before using
this product together with a heart pacemaker, please contact your physi­cian or the manufacturer of the pacemaker to ensure that the pacemaker
is not subjected to interference.

3. If you use other medical devices, please use the SWING only by adhering
to the safety information/safety directives of your physician or the manu­facturer.

English 25

Safety information for the lithium polymer battery

The battery used in SWING is a lithium polymer battery, which was produced
in accordance with the most current provisions and safety regulations. The
battery can be damaged when misused or if not used according to the speci­fications, in this case Humantechnik accepts no liability.

Warning!
The following risks exist in extreme cases:
– Heat development
– Fire development
– Explosion
– Smoke and gas development

UÊ Do not heat the battery above 70°C, e.g., through sun radiation or by

casting it into fire.

UÊ Do not subject the battery to moisture.
UÊ Do not short circuit the battery
UÊ Do not disassemble or deform the battery.
UÊ Store device/battery in cool and dry places at room temperature.
UÊ Use only the provided charger for the battery.
UÊ Recharge the battery in the device regularly in case the device is not

used for a longer time (every 6 months for app. 1 hour).

UÊ Charge the battery only at ambient temperatures of 10°C to 40°C.
UÊ Do not recharge the battery if the device is clearly damaged.
UÊ Please return defective devices or devices with worn out batteries to

your specialty retailer.

Scope of delivery

The scope of delivery of the SWING digital / SWING digital LR includes:

1 SWING digital receiver
1 SWING digital sender
1 battery AP12A
1 screwdriver
1 power supply
1 audio connection cable with 3.5 mm stereo stereo jack
1 audio adapter 3.5 mm on 6.3 mm stereo stereo jack
1 Cinch adapter
1 SCART adapter
1 pair of additional silicone ear adapters small (not LR version)

English 26

Quick overview

These operating instructions let you fold the first 2 pages out. These pages
show images of the SWING with identification by numbers.

Overview headphone:

1 controller for volume
2 loud speaker ear adapters
3 battery compartment
4 status LED
5 pairing button (connect)
6 balance (Bal)
7 tone adjustment left right (tone)

Overview LR earpiece:

8 On/Off switch (On / Off)
9 controller for volume
10 induction loop
11 strangulation protection
12 battery compartment
13 status LED
14 pairing button (connect)
15 balance (Bal)
16 tone adjustment left right (tone)

Overview sender:

17 charging bay
18 charge LED for receiver in charging bay
19 replacement battery charging bay
20 charge LED for replacement battery charging bay
21 status LED sending

Overview accessories:

22 power supply connection
23 USB connection
24 AUDIO, MIC / USB selector switch
25 female connector for connection to a sound source (green)
26 female connector for connection to a microphone (black)
27 pairing button (connect)

English 27

We congratulate you for purchasing your »SWING« headphones. You have
chosen a reliable state-of-the-art and reliable device. Please review these
operating instructions carefully to ensure that you commission the device cor­rectly and that you are familiar with all functions of the device.

Connect sender to a sound source

Please switch the sound source off before connecting the sender.

CONNECT

MIC

DC 12V

USB AUDIO

AUDIO

USB

MIC

25

28

Plug the provided audio connection cable 28 into the green “Audio” female
connector 25 of the sender.

Several options exist to connect the SWING digital to a sound source (e.g. TV,
computer, etc.).
Please check the connection options of your sound source.

AUDIO OUT

– Cinch female connector

L

– SCART female connector

R

AV

– Headphone connection

)

)

– External microphone (optional)

)

)

– USB connection (e.g. computer)

DIGITAL OUT

COAXIAL

OPTICAL

– S/PDIF digital output (optional with adapter box A-4963-0)

English 28

Connect sender to a Cinch female connector

CONNECT

MIC

AUDIO OUT
L

DC 12V

USB AUDIO

USB

AUDIO

MIC

R

28

29

Connect the adapter cable with the Cinch plugs 29 to the audio connection
cable 28.
Plug the Cinch plug into the Cinch connection of your sound source. Please
ensure that the white connection is connected to the white connection of your
sound source.
Please ensure that the red connection is connected to the red connection of
your sound source.
Optionally, a S/PDIF is available for the Chinch adapter box A-4963-0. It will
be connected between your sound source and the Cinch plug 29.

Connect sender to a SCART female connector

CONNECT

MIC

AV

DC 12V

USB AUDIO

USB

AUDIO

MIC

SCART
OUT

28

30

Connect the SCART adapter 30 into the audio connection cable 28.
Plug the SCART adapter into the SCART female connection of your sound
source.

English 29