ADA INSTRUMENTS ZVE Pocket User Manual [ru]

Operating manual

Video Borescope

Model: ZVE Pocket

Manufacturer

Address: WWW. ADAINSTRUMENTS.COM

Table of contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5. Operation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6. Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

8. Warranty/Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Appendix 1. Certificate of acceptance and sale Appendix 2. Warranty card

ZVE Pocket

INTRODUCTION

Video Borescope has been designed as a user friendly and economical way of solving hidden problems and increasing productivity. (E.g. Inspect vent pipe and system of air conditioner, machine equipment, engine and so on). The instrument has 2.7 “ LCD screen, equipped with camera probe of 9mm head , length 60cm. The camera head of the probe has 4 bright LED lights that are unadjustable, which helps you to reach gaps and holes. The camera head equips with several accessories including magnetic tip, mirror tip and hook,which makes it flexible. ZVE Pocket has features of 4X image zoom and 180°image rotation. The camera probe adopts unique patent structure which designs the camera probe in a built-in style. It also has the advantages of small size, stable performance, easy operation and portability. It is widely used in applications such as the industry, the building, the aviation, the vehicles maintenance.

SAFETY INSTRUCTIONS

● Please read this manual carefully and thoroughly before using this product.

● Do not remove any labels from the product.

● Keep the work area clean and well lighted, cluttered and dark areas may cause accidents

● Do not operate the product with the presence of flammable/explosive gases.

● Do not use the product around corrosive chemicals, which may damage the lens and affect image quality.

● Keep away from bystanders and children while operating.

● Stay alert, watch what you are doing and use common sense. Careless operation may result in personal injury and damages to the

lens.

● Keep proper footing and body balance all the time.

● Always wear protective eyewear. Use dust mask, non-skid safety shoes, safety helmet and hearing protection under appropriate cir-

cumstances.

● Do not place this product on trolleys or other slippery slopes. The product may fall off and cause serious injury to a person or damage the

product.

● For safety purpose, please always keep the video inspection away from any liquid. Liquid increases the risk of electric shock and damage to

the product.

● Do not use this device for human body inspection or medical use.

● This product is not shock-resistant. Do not drop it or use it as a hammer.

● Remove the batteries before long term storage to prevent battery leak from damaging the instrument.

● Please dispose the batteries properly. High temperature will cause explosions and do not burn the batteries. Strap insulated tape around the

battery charges to avoid unsafe contacts with other objects. Please follow the local regulations of battery disposing.

APPEARANCE

A. LCD screen B. LED brightness increase key C. image rotation key

D. ON/OFF key

E. Image zoom key

F. LED brightness decrease key

G. Sling hole

H. Camera protection

I. Camera head J. Probe

K. Camera head slot

ZVE Pocket

Рic.1

L. back cover buckle M. Battery lid

ACCESSORIES

1. Hook

2. Mirror

3. Magnet

4. Thread protector

5. Safety sling

ZVE Pocket

OPERATION INSTRUCTIONS Battery Installation

1. Unscrew the two screws at the end of the grip and remove the battery lid M.

2. Install 4pcs of AAA alkaline batteries or rechargeable batteries following the correct direction signs indicated on the holder.

3. Put back the battery lid and fasten the screw.

Рiс.2

Open Camera Probe

Open the camera probe before use . Pinch buckle “L” as the white arrow in Picture 3. At the same time, pull out the back cover to the black arrow direction. In this way, the built-in camera probe can be seen. Pull out the

probe along the inside casing and place the bottom of probe at a proper location along the camera head slot “K”.

Close the back cover from opposite direction to use the unit.

Accessories installation

Accessories and camera head are connected using threaded screw. It is recommended to put on the thread protector when no attachment is installed.

When use the three accessories shown in Fig.2, remove the thread protector before put on other accessories.

Basic Operations

1. Facing the LCD screen press and hold for 2s to turn on the product, and LCD screen will be powered on (press this button again

for 2s to turn off the unit);

2. Press to increase LED brightness;

3. Press to decrease LED brightness;

4. Press to rotate the image each time by 180 .

5. Press to zoom the picture from x1.0 to x1.5, x2.0 , x2.5, x3.0, x3.5 , x4.0

This product is designed for long distance inspection. Classic applications are inspections of HVAC systems, vehicles, circuits, boats and aviation. Under limited conditions, accessories can be used to pick up small objects such as rings and screws.

Operation Precautions

a) Please read the safety instructions thoroughly before operation, choose a proper working area to reduce the risk of accidents. b) The probe is flexible, which helps you to get to hard-to-reach areas. Please don’t insert or bend the camera probe by force. Please do

ZVE Pocket

Рic.3

ZVE Pocket

not over bend the probe (normally, the bending radius should more than 5cm), so as not to cause permanent damage to the probe. c) Don’t use the probe or camera head to remove barricades, clear pathways or clogged areas. It must not be used as a fishing rod or tape. d) The hand-held LCD display is not waterproof. The camera head and its cover are waterproof, but not acid-proof or fireproof. Touch with these materials will damage the camera head’s protective plastic. Do not immerge the camera head into corrosive, oily places or contact high-temperature objects. e) Don’t place the inspection into anything or anywhere that may contain a live electrical charge. Please check following methods to avoid injury.

For walls: For inspecting inside the walls, make sure the electricity of the whole house is shut down before using the tool. For pipes: If you suspect a metal pipe could contain an electrical charge, have a qualified electrician to check the pipe before using.

Ground circuit, in some cases, can be returned to the cast metal pipes and cause them to be charged.

For automobiles: Make sure the automobile is not running during inspection. Metal and liquid under the hood may be hot. Don’t get

oil or gas on the camera head.

Operation Notes

●Please don’t operate this product unless the manual has been read and proper training has been completed.

●Indicator of battery will appear, when the battery is low.

●Don’t immerse the unit into water, which will result in electric shock and damage.

●Only while the product is assembled well, the camera head is water-proof, but the handheld display isn’t fully water-proof.

●Don’t use the product if condensation forms inside the camera head.

●If the tool couldn’t work well after turning it on. Please take the battery out. It is dangerous, wait until it is repaired.

●Store idle product out of reach of children and other untrained persons. The tool is dangerous in the hands of untrained users.

●Maintain the inspection tool with care. If the tool is dropped, check for the breakage ,which may affect the tool’s operation. If it is

damaged, have the tools serviced before using. Many accidents are caused by poorly maintained tool.

●Use only accessories that are recommended by the manufacturer for your tool. Accessories are suitable for the tool, but may become

hazardous when used on another tool.

●Dry your hands before turning the tool ON or OFF.

●Protect against excessive heat. The product should be put away from heat sources, such as radiators, heat registers, stoves or other

products (including amplifiers) that produce heat. Don’t use the tool near moving machinery or areas where the temperature is exceed 45º.

●Put on the camera protector and store the probe in the unit after operation.

●Store the product in ventilated and dry places.

MAINTENANCE

●Tool service must be performed only by qualified repair personnel. Performed by untrained repair personnel could result in injury.

●When servicing a tool, only use identical replacement parts. Use of authorized parts or failure to follow maintenance instructions may

create a risk of electrical shock or injury.

●Don’t attempt to take any pieces of this product apart, unless directed by this manual.

●Provide proper cleaning: don’t use acetone to clean the tool. Use soap or soft abluent to clean. Gently clean the LCD with a dry cloth. Remove the battery before cleaning.

●Upon completion of any service or repair, please ask the service technician to check if the tool is in proper condition.

●Stop using the unit if it starts smoking or emitting noxious fumes.

●Remove the battery and ask qualified person under the following conditions:

a. If liquid has been spilled or objects have fallen into product. b. If product doesn’t operate normally even if you have followed the operation instructions. c. If the product has been dropped or damaged in any way. d. When the product exhibits a distinct change in performance.

ZVE Pocket

CAUTIONS

Don’t drop the product or use by force.

• Don’t disassemble the product to avoid failure.

• Don’t place the product with corrosive gas or objects.

• Don’t expose the product in environment, which is with shock, too high or too low temperature.

• Store the product indoor.

• Don’t immerse the product into water, which will result in damage to product.

• Check the batteries regularly to prevent battery leak.

• Please take out the battery, if it is not for use for long time.

•

TROUBLE SHOOTING

Problems Possible Reasons Solutions

Display is on, but no image

1.Protection cap is on.

2.Camera head covered by objects.

ZVE Pocket

1. Remove the camera protection cap.

2. Clean camera head.

LED on the camera head are dim at max

brightness; color display changes to black

and white; color display turn off itself

after a period of time.

Low battery

Replace battery

ZVE Pocket

The product can’t turn on.

Abnormal display or key malfunction. Display is strongly interfered or unusual

TECHNICAL DATA

Recommended use

Viewable angle

Focal length

Visible distance 2.5сm-30сm Diameter of camera head Φ9mm Probe length Image display 2.7″TFT/LCD

Indoor 60º 50mm

About 60cm

Dead battery or damaged battery. Replace battery.

supply voltage.

Release the back cover and close again as

Pic.3 shows;

+ 22 hidden pages