ADA INSTRUMENTS ZVE 160 User Manual [ru]

ZVE 160

Operating manual

Video Borescope

Model: ZVE 160

Manufacturer

Address: WWW. ADAINSTRUMENTS.COM

Table of contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4. Operation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4. Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4. Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6. Warranty/Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Appendix 1. Certificate of acceptance and sale Appendix 2. Warranty card

ZVE 160

INTRODUCTION

ZVE 160 is used to inspect HVAC system, mechanical equipments and engines. The product has a high clarity 3.5″ diagonal color LCD. It uses interchangeable probes and can be connected to probes with different length and diameter (units comes with a standard 12mm probe). The adjustable LED lights set around the camera head help the user to see inside dark gaps and holes. Several accessories can be equipped on the tip of the probe, making it more flexible and adaptive. The accessories of 12mm camera probe are magnetic tip, hook tip and mirror tip. The instrument has a TV-out interface to transmit real time images to a TV screen. It is capable of image zooming and image rotation. This model has the advantages of portability, high clarity images, stable performance and easy operation. It is widely used in applications such as the industry, building, aviation, vehicles maintenance, mining and archaeology.

SAFETY INSTRUCTIONS

● Do not remove any labels from the product.

● Keep the work area clean and well lighted, cluttered and dark areas may cause accidents

● Do not operate the product with the presence of flammable/explosive gases.

● Do not use the product around corrosive chemicals, which may damage the lens and affect image quality.

● Keep away from bystanders and children while operating.

● Stay alert, watch what you are doing and use common sense. Careless operation may result in personal injury

and damages to the lens.

● Keep proper footing and body balance all the time.

● Always wear protective eyewear. Use dust mask, non-skid safety shoes, safety helmet and hearing protection

under appropriate circumstances.

● Do not place this product on trolleys or other slippery slopes. The product may fall off and cause serious injury

to a person or damage the product.

● For safety purpose, please always keep the video inspection away from any liquid. Liquid increases the risk of

electric shock and damage to the product.

● Do not use this device for human body inspection or medical use.

● This product is not shock-resistant. Do not drop it or use it as a hammer.

● Remove the batteries before long term storage to prevent battery leak from damaging the instrument.

● Avoid high temperature environment.

APPEARANCE

ZVE 160

Camera probe

LCD and grip

Magnetic tip Hook tip Mirror tip TV cable

Pic.1 Pic.2 Pic.3

FUNCTIONS

A. Lens protector B. Lens C. Swan neck probe D. Probe connector E. LCD screen F. key——Increase LED brightness

G. key——Image rotation

H. key——Decrease LED brightness

I. key——Image zooming

J. key——Power on/off K. Video-out port

OPERATION INSTRUCTIONS

Battery Installation

1. Unscrew the screw at the end of the grip and remove the battery lid.

2. Extract the battery holder from the grip, and install 4 AA alkaline batteries or rechargeable batteries

following the correct direction signs indicated on the holder.

3. Put back the battery holder following the indicated direction.

4. Put back the battery lid and fasten the screw.

Рic.3 Рic.4 Рic.5

ZVE 160

Connect the Unit with a Camera Probe

Connect the inspection unit with a camera probe before operation. To connect the probe to the unit, make sure the keyed ends are properly aligned (Fig7). Tighten the knob when they are aligned and

connected.

Accessories installation

A. Accessories installation of standard 12mm probe

For the three accessories shown in Fig.2 (magnetic tip, hook tip, mirror tip), hold the camera head and slip the semicircle end of the accessory over the camera head as shown in Fig.8. Rotate the accessory by 90 degrees to a fixed position, as shown in Fig.9.

ZVE 160

Keyed ends

Рic.7

Рic.8 Рic.9

ZVE 160

B. Accessories installation of optional 9mm and 5.5mm probe

Accessories of 9mm probe is shown in Fig.10, while accessories of 5.5mm probe is shown in Fig. 11. Accessories and camera head are connected using threaded screw. It is recommended to put on the thread protector when no attachment is installed. Remove the thread protector

before put on other accessories.

A. hook B. mirror C. magnet

D. screw protector

E. direction ball F. mirror

G. screw protector

Video Output to TV

To view images from the TV, connect the VIDEO OUT port of KC160A and the VIDEO IN port of the TV using included TV cable. Once

connection established, the real time image is displayed on both ZVE 160 and the TV screen simultaneously. Basic Operations

1. Facing the LCD screen, press and hold for 3 seconds to turn on the instrument, and LCD screen will be powered on (press again to turn

off the unit);

2. Press to increase LED brightness;

3. Press to decrease LED brightness;

4. Press to rotate the image each time by 180 .

5. Press to zoom the picture from x1.0 to x2.0.

Рic.10 Рic.11

Operation Precautions

•

For walls: For inspecting inside the walls, make sure the electricity of the whole house is shut down before using the tool.

For pipes: If you suspect a metal pipe could contain an electrical charge, have a qualified electrician to check the pipe before using. Ground circuit, in some cases, can bereturned to the cast aluminum pipes and cause them to be charged.

For automobiles: Make sure the automobile is not running during inspection. Metal and liquid under the hood may be hot. Don’t get oil or gas on the camera head.systems, vehicles, circuits, boats and aviation. Under limited conditions, accessories can be used to pick up small objects such as rings and screws.

OPERATION NOTES

•

ZVE 160

Please read the safety instructions thoroughly before operation, choose a proper working area to reduce

the risk of accidents.

The probe is flexible, which helps you to get to hard-to-reach areas. Please don’t insert or bend the

camera probe by force. Please do not over bend the probe (normally, the bending radius should more than 5cm), so as not to cause permanent damage to the probe.

The hand-held LCD display is not waterproof. The camera head and its cover are waterproof, but not acid-proof or fireproof. Touch with these materials will damage the camera head’s protective plastic. Do not immerge the camera head into corrosive, oily places or contact high-temperature objects. Don’t place the inspection into anything or anywhere that may contain a live electrical charge. Please check following methods to avoid injury.

Don’t turn on and off the device continuously. Please allow more than 2 seconds between each On and Off for the unit to properly boot up or shut down. If there is unusual image, please turn off the unit and try again. The indicator of battery will appear, when the battery is low. Don’t immerse the handheld display unit into water, which will result in electric shock and damage.

ZVE 160

Only while the product is assembled well, the camera head is water-proof, but the handheld display isn’t fully water-proof.

•

Don’t use the product if condensation forms inside the camera head.

•

If the tool couldn’t work well after turning it on. Please take the battery out. It is dangerous, wait until it is repaired.

• Store idle product out of reach of children and other untrained persons. The tool is dangerous in the hands of untrained users.

•

Maintain the inspection tool with care. If the tool is dropped, check for the breakage ,which may affect the tool’s operation. If it is damaged,

• have the tools serviced before using. Many accidents are caused by poorly maintained tool.

Use only accessories that are recommended by the manufacturer for your tool. Accessories are suitable for the tool, but may become

•

hazardous when used on another tool. Dry your hands before turning the tool ON or OFF and before replacing battery.

•

Protect against excessive heat. The product should be put away from heat sources, such as radiators, heat registers, stoves or other products

•

(including amplifiers) that produce heat. Don’t use the tool near moving machinery or areas where the temperature is exceed 45ºC.

Put on the camera protector after operation.

• Store the product in ventilated and dry places.

•

MAINTENANCE

Tool service must be performed only by qualified repair personnel. Performed by untrained repair personnel could result in

•

injury. When servicing a tool, only use identical replacement parts. Use of authorized parts or failure to followmaintenance instructions

•

may create a risk of electrical shock or injury. Don’t attempt to take any pieces of this product apart, unless directed by this manual.

•

Provide proper cleaning: don’t use acetone to clean the tool. Use soap or soft abluent to clean. Gently clean the LCD with a dry

•

cloth. Remove the battery before cleaning. Upon completion of any service or repair, please ask the service technician to check if the tool is in proper condition.

•

Stop using the unit if it starts smoking or emitting noxious fumes.

•

Remove the battery and ask qualified person under the following conditions: a. If liquid has been spilled or objects have fallen into product. b. If product doesn’t operate normally even if you have followed the operation instructions. c. If the product has been dropped or damaged in any way.

d. When the product exhibits a distinct change in performance.

CAUTIONS

Don’t drop the product or use by force.

•

Don’t disassemble the product to avoid failure.

•

Don’t place the product with corrosive gas or objects.

•

Don’t expose the product in environment, which is with shock, too high or too low temperature.

• Store the product indoor.

•

Don’t immerse the product into water, which will result in damage to product.

•

Check the batteries regularly to prevent battery leak.

•

Please take out the battery, if it is not for use for long time.

TROUBLE SHOOTING

ZVE 160

Problems Possible Reasons Solutions

Display is on, but no image

Camera head covered by

objects or safety cap is on

Clean camera head

ZVE 160

LED on the camera head are dim

at max brightness; color display

changes to black and white; color

display turn off itself after a

period of time.

The product won’t turn on

Abnormal display or key

malfunction

TECHNICAL DATA

Recommended usage Field of View

Focal length 12mm standard

Outer diameter standard of lens camera lens

Low battery

Dead battery Replace battery

Display is strongly interfered

or unusual supply voltage

Indoor 60º 50mm and 50cm for your choice

12mm (Magnetic tip, Hook tip, Mirror tip included)

Replace battery

Remove the batteries and

reinstall them again

+ 23 hidden pages