ADA INSTRUMENTS ZHT 60 User Manual [ru]
Operating manual
Humidity and Temperature meter
Model: ZHT 60
Manufacturer
Address: WWW. ADAINSTRUMENTS.COM
ZHT 60
Table of contents
1. Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. Humidity and air temperature measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8. Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10. Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11. Appendix 1- “Certicate of acceptance and sale”
12. Appendix 2- “Warranty card”
ZHT 60
Kit
ZHT 60, battery 9, case for transportation, operating manual.
Introduction
The 2 in 1 digital Humidity & Temperature Meter has been designed to combine the functions of Humidity Meter and
Temperature Meter. It is an ideal Humidity & Temperature Meter Instrument with scores of practical applications for
professional and home use.
The Humidity & Temperature Meter has semiconductor sensor. Microprocessor processes data.
This operations manual contains general information and specication.
Functionality
Mini size
Fast response time
Semiconductor sensor for temperature measurements of -20°C to 60°C and with 0.1°C Resolution.
Humidity measurement from 0%RH to 100%RH with 0.1%RH resolution
Data Hold function
Backlight
MIN & MAX Hold function
3
MEASUREMENT FOUNDATION
Specications
Display LCD display with backlight
Operating conditions 0° to +50°С
Response Time Probe Temperature and Relative Humidity: 3 minutes
Relative humidity <80%
Storage conditions -10°С to +60°С
Storage RH 0-80% without battery
Power 9V battery
Battery life 30 hours
Dimensions, mm 225 х 45 х 34
Weight, gr. 200, including battery
Auto Power Off after 15 min. of inactivity
ZHT 60
4
MEASUREMENT FOUNDATION
Sensor type
Humidity precision sensor
Temperature thermistor (probe) and type “K” thermocouple
Sample rate 2,5 samples per second
Polarity automatic, (-) negative temperature indication
Power батарея 9V
Over-range “OL” mark indication
Humidity range/temperature
Humidity 0%-100% RH
Temperature -20°С - +60°С
Resolution 0,1% RH; 0,1°C/°F
ZHT 60
5
MEASUREMENT FOUNDATION
ZHT 60
Accuracy humidity* ±3,5%RH (at 25°С, 5%-95% RH)
Accuracy temperature ±2,5°С
*The measuring range is from 0% to 100%, but above 95% and below 5% the deviation is not specied.
6
MEASUREMENT FOUNDATION
ZHT 60
Features
1. Humidity / Air Temperature Probe: Humidity & and Temperature
Semiconductor Sensor inside.
1
2. LCD Display: LCD display with units of °С, °F, %RH and low battery “BAT”
MIN /MAX HOLD, DATA HOLD indication.
3. MAX/ MIN Recording/Data Hold Button: Press MAX/MIN button to enter
MAX,MIN Recording mode (manual range only ). Press once to select MIN. Press
again to select MAX and press again release MIN/MAX recording function.
Data Hold: Press and hold the Button for over 2 second to turn on or off data
2
hold function. The reading will be held when Data Hold button Switch is pressed.
If the button Switch for over 2 second is pressed once again, will release the hold
3
and allow a further measurement.
4
MAX Hold / MIN Hold: Press and hold the Button for over 2 second to turn on or
off data hold function.
4. %RH, °C, °F press the button to select %RH, °C, °F measurement.
5. Power ON/OFF Button : Turn the meter power ON/OFF.
6. : Turn the meter backlight ON/OFF
7. Battery Compartment
5
6
7
7
MEASUREMENT FOUNDATION
ZHT 60
Humidity and air Temperature Measurements
1.Hold the probe in the area to be tested & allow adequate time for readings to stabilize.
2.Press %RH ,°C, °F select Button to enter select %RH , °C, °F Measurement.
3.Read the Relative Humidity and Air Temperature.
Safety instructions
Do not immerse the probe in liquid; it is intended for use in air on.
Don’t expose the humidity sensor to direct sunlight (insolation).
Don’t touch or manipulate the humidity sensor.
Battery Replacement
If the sign appears on the LCD display, it indicates that the battery should be replaced. Open the battery case and
replace the exhausted battery with new battery.
-
+
8
MEASUREMENT FOUNDATION
Loading...