ADA INSTRUMENTS TopLiner 3x360 User Manual [ru]

MEASUREMENT FOUNDATION

Operating manual

Laser level

Model: TOPLiner 3x360

Manufacturer: ADAINSTRUMENTS Address: WWW.ADAINSTRUMENTS.COM

2

TOPLiner 3x360

Table of contents

1. Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Technical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3. Safety requirements and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

4. Order working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

6. Safety precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

8. Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Appendix 1- “Certicate of acceptance and sale”
Appendix 2- “Warranty card”

TOPLiner 3x360

1. CAUTIONS

Laser level ADA TOPLiner 3x360 is an up-to-date functional and multi-prism device designed for indoor and
outdoor performance. The device emits:
one horizontal laser line (beam scan angle of 360°)
two vertical laser lines (beam scan angle of 360°)
Do not look at the laser beam!
Do not install the device on the eye level!
Before using the device, do read this operating manual!

2. TECHNICAL REQUIREMENTS

2.1. FUNCTIONAL DESCRIPTION

Emitting a horizontal and two vertical laser line.
Quick self-leveling: when line accuracy is out of the range the laser line

ashes and the warning sound is produced. Compensator locking system

for safe transportation. Intermediate compensator locking system for slope operation.
Indoor and outdoor performance function.

Ceiling Cross

360 e

Vercal Line

Cross

360 eHorizontal Line

Down Cross

360 e

Vercal Line

3

4

TOPLiner 3x360

2.2. FEATURES

1. Keypad

2. Jack for charger

3. Battery compartment

4. Rotating base

5. Lock switch
(ON/X/OFF)

6. Vertical laser window

7. Horizontal laser window

7

1

2

3

6

5

4

Button panel

Tilt LED (1)

Indicator lights up in the intermediate position of the
compensator lock.

Detector LED (2)

Indicator lights up when press Detector button.

Power LED (3)

Indicator lights up when power is on.
Indicator blinks when power is low.

Horizontal switch (H) (4)

Detector switch (5)

Vertical switch(V) (6

TOPLiner 3x360

5

2
3
4

1

6

5

6

TOPLiner 3x360

2.3. SPECIFICATIONS

Laser 2V1H (360° laser)
Light sources 635~670nm
Laser safety class Class 2, <1mW
Accuracy ±1 mm/5 m
Self-leveling range ±4.5°
Operating range with/without receiver radius 40~50m (with detector)
Rotation/Fine adjustment 360 °/ ±10° (with Rotation base)
Power source Li battery set
Operation time Approx. 5-8 hours, if everything is on

Tripod thread 1/4 ″ and 5/8 ″

Operating temperature -10°C +40°C
Weight 0.9 kg (with Rotation base)
Size 130mm ×60mm ×160 mm (with Rotation base )

TOPLiner 3x360

3. SAFETY REQUIREMENTS AND CARE

Follow safety requirements! Don’t face and stare at laser beam!
Laser level is an accurate Instrument, which should be stored and used with care.
Avoid shaking and vibrations! Store the Instrument and It’s accessories only In the carrying case.
In case of high humidity and low temperature, dry out the Instrument and clean It after the usage.
Do not store the Instrument at a temperature below -20°C and above 50°C, otherwise the Instrument can be
out of action.
Don’t put the Instrument Into the carrying case If the Instrument or case are wet. To avoid moisture condensa­tion Inside the Instrument- dry out the case and laser Instrument!
Check regularly Instrument adjustment!
Keep the lens clean and dry. To clean the Instrument use a soft cotton napkin!
Do not aim laser beam at persons or animals.
Do not open instrument housing. Repairs should be carried out by authorized workshops only.
Do not remove warning labels or safety instructions.
Keep instrument away from children.
Do not use instrument in explosive environment.

7

8

TOPLiner 3x360

4. ORDER WORKING

Assemblage of the rotating base

Remove the instrument from the base (Picture 1).
Place the instrument on the base (Picture 2).

Picture 2Picture 1

Insert the battery (Picture 3)

Use standard Li-battery only.
Pay attention to the polarity.
Insert the battery.
Cover the battery cover.

Li-battery

Battery cover

TOPLiner 3x360

Picture 3

9

10

TOPLiner 3x360

Mounting thread

It is possible to place the instrument on the tripod or wall mount during operation. For attachement use

thread 1/4” (pic.4) at the bottom part of the instrument or thread 5/8” (pic. 5) at the bootom part of the

rotating base.

Picture 5 Picture 4

Lock Switch

Lock switch has tree positions:

TOPLiner 3x360

11

OFF mode (Pic.6)

Power is OFF. Pendulum is locked. Button panel can
not be used.

Tilt mode (Pic.7)

Power is ON. Pendulum is locked. Button panel can be used.
Vertical lines and horizontal line can be switched on/off.

ON mode (Pic.8)

Power is on. Pendulum is unlocked. Self-leveling.
Button panel can be used. Vertical lines and horizontal line can be
switched on/off. Detector mode.

Рic. 6

Рic. 7

Рic. 8

12

TOPLiner 3x360

Power warning (Picture 9)

Power LED ashes when the power is full.

Maximum operating time with all laser beams is about 30
min. All laser beams and LED will be shut off when the power
is very low. Please use the standard charger to charge the
instrument.

Charger LED (10)

The LED of the charger will be yellow when it’s charging.
When power is full, the indicator changes into green light.
The Charger should be 5V 1A . The instrument can be used
while charging.

Picture 9

Picture 10

TOPLiner 3x360

Tilt mode warning

The instrument can work in the tilt mode (intermediate position of lock switch).

Tilt LED ashes (Pic.11). Pendulum is locked. Laser lines are projected at any

angle. For example, when making stairs.

Detector mode (рic. 12)

Use the detector mode in bright light when laser beam is not visible. Press button

to switch on the dector mode. Upper LED ashes. Place the detector to

the the place of beam location. Follow the instruction of detector usage when
searching the beam.

Out of leveling warning

All the laser beams will be shut off when the instrument is out of leveling range.
The buzzer will alarm at the same time.

Transportation

Please turn the lock switch in OFF mode.
Please put the instrument on the correct position in soft bag or case.
Dot not drop it during transportation.

13

Picture 11

14

TOPLiner 3x360

Picture 12 Picture 13

Usage of rotating base

360 °rotating (Picture 12)

Part A can rotate around part B by 360°.

±10° ne adjustment (Picture 13)

In leveling mode, by using adjusting
knob , the instrument can rotate
around the down dot by ± 10°.

To check the accuracy of line laser level

To check the accuracy of line laser level
(slope of plane)

Place laser level on the tripod 5m away from the
wall so the horizontal laser line will be directed
to the wall.
Switch on the power. The instrument starts to
self-level. Mark point A on the wall to show the con­tact of laser beam with the wall. Turn the instrument

by 90° and mark points В, С, D on the wall. Measure
distance “h” between the highest and lowest points

(these are A and D points in the picture).

If “h”is ≤ 6 mm, the measurement accuracy is
good. If “h” exceeds 6 mm, apply service center.

TOPLiner 3x360

15